共查询到20条相似文献，搜索用时 31 毫秒
1.
Based on the lumped-mass method and rigid-body kinematics theory, a mathematical model of a gravity cage system attacked by irregular waves is developed to simulate the hydrodynamic response of cage system, including the maximum tension of mooring lines and the motion of float collar. The normalized response amplitudes (response amplitude operators) are calculated for the cage motion response in heave and surge, and the mooring line tension response, in regular waves. In addition, a statistical approach is taken to determine the motion and tension transfer functions in irregular waves. In order to validate the numerical model of a gravity cage attacked by irregular waves, numerical predictions have been compared with the experimental observations in the time and frequency domain. The effect of wave incident angle on the float collar motion, mooring line tension and net volume reduction of the gravity cage system in irregular waves is also investigated. The results show that at high frequencies, the cage system has no significant heave motion. It tends to contour itself to longer waves. The variation amplitude of mooring line forces decreases as the wave frequency increases. With the increasing of wave incident angle, the horizontal displacement of the float collar increases. 相似文献
2.
Failure of net cage and mooring system is of great concern to the marine aquaculture industry. To avoid the structure failure in storm waves and current during typhoon events, net cage can submerge below the water surface in practice. A submersible net cage and mooring system is analyzed by numerical simulation and physical model test. The numerical model is established based on the lumped mass method and principle of rigid body kinematics. A series of physical model tests are conducted to validate the numerical model of single net cage and grid mooring system in waves and current. Numerical results correspond well with data obtained from physical model test. The results indicate that when net cage is submerged below the water surface, the deformation of net cage in waves can be improved significantly, and the tension force on the anchor line, bridle line and grid line will decrease significantly. However, the tension force on the buoy line in the submergence condition is larger than that in the floating condition. Different relative submergence ratios are also considered in our numerical simulation, and a relative submergence ratio equal to 0.1 is suggested here. The tension reduction ratio (56%) for the four-cage system is larger than that for the single-cage (52%) and double-cage systems (44%). 相似文献
3.
This paper presents a simulation model based on the finite element method. The method is used to analyze the motion response and mooring line tension of the flatfish cage system in waves. The cage system consists of top frames, netting, mooring lines, bottom frames, and floats. A series of scaled physical model tests in regular waves are conducted to verify the numerical model. The comparison results show that the simulated and the experimental results agree well under the wave conditions, and the maximum pitch of the bottom frame with two orientations is about 12o. The motion process of the whole cage system in the wave can be described with the computer visualized technology. Then, the mooring line tensions and the motion of the bottom frame with three kinds of weight are calculated under different wave conditions. According to the numerical results, the differences in mooring line tensions of flatfish cages with three weight modes are indistinct. The maximum pitch of the bottom frame decreases with the increase of the bottom weight. 相似文献
4.
Fredriksson D.W. Swift M.R. Eroshkin O. Tsukrov I. Irish J.D. Celikkol B. 《Oceanic Engineering, IEEE Journal of》2005,30(1):28-36
Recent work in the area of open ocean aquaculture system dynamics has focused separately upon either the response of fish cages in waves or the steady drag response due to ocean currents. In reality, however, forcing on these open ocean structures is a nonlinear, multidirectional combination of both wave and current profiles. At the University of New Hampshire-operated Open Ocean Aquaculture site, data were collected from a wave measurement buoy and a downward-looking Acoustic Doppler Current Profiler to characterize the surface elevation and water velocity profiles during an extreme northeast storm event. In addition to waves and currents, fish cage motion response in heave, surge, and pitch was inferred from accelerometer measurements during the same storm. The environmental data sets obtained during the peak of the storm were processed, analyzed, and used as input to a dynamic finite-element model. Simulations were performed using three load case scenarios: 1) in both waves and currents; 2) in waves only; and 3) in currents only. Model motion response results in both the time and frequency domain were compared with data obtained in situ . In addition to the motion response tests, the wave and current forcing influencing the mooring line tension response was also investigated. Analysis shows that in this case, the currents do not severely influence the oscillatory motion response, but do cause the cage to tilt, layback, and sink. The wave and current interaction effect did, however, influence the anchor line loads with a portion being attributed to nonlinear effects. 相似文献
5.
Based on rigid kinematics theory and lumped mass method,a mathematical model of the two net cages of grid mooring system under waves is developed.In order to verify the numerical model,a series of physical model tests have been carried out.According to the comparisons between the simulated and the experimental results,it can be found that the simulated and the experimental results agree well in each wave condition.Then,the forces on the mooring lines and the floating collar movement are calculated under different wave conditions.Numerical results show that under the same condition,the forces on the bridle ropes are the largest,followed by forces on the main ropes and the grid ropes.The horizontal and the vertical float collar motion amplitudes increase with the increase of wave height,while the relationship of the horizontal motion amplitude and the wave period is indistinct.The vertical motion amplitude of the two cages is almost the same,while on the respect of horizontal motion amplitude,cage B(behind cage A,as shown in Fig.4) moves much farther than cage A under the same wave condition.The inclination angle of the floating system both in clockwise along y axis and the counter one enlarges a little with the increase of wave height. 相似文献
6.
Numerical Analysis on the Effects of Submerged Depth of the Grid and Direction of Incident Wave on Gravity Cage 总被引：1，自引：0，他引：1
In this paper,the numerical model of the net cage with the grid mooring system in waves is set up by the lumped mass method and rigid kinematics theory,and then the motion equations of floating system,net system,mooring system,and floaters are solved by the Runge-Kutta fifth-order method.For the verification of the numerical model,a series of physical model tests have been carried out.According to the comparisons between the simulated and experimental results,it can be found that the simulated and experimental results agree well in each condition.Then,the effects of submerged depth of grid and direction of incident wave propagation on hydrodynamic behaviors of the net cage are analyzed.According to the simulated results,it can be found that with the increase of submerged depth of grid,the forces acting on mooring lines and bridle lines increase,while the forces on grid lines decrease;the horizontal motion amplitudes of floating collar decrease obviously,while the vertical motion amplitudes of floating collar change little.When the direction of incident wave propagation changes,forces on mooting lines and motion of net cage also change accordingly.When the propagation direction of incident wave changes from 0° to 45°,forces on the main ropes and bridle ropes increase,while the forces on the grid ropes decrease.With the increasing propagation direction of incident wave,the horizontal amplitude of the forces collar decreases,while the vertical amplitude of the floating collar has little variation. 相似文献
7.
内孤立波中半潜平台动力响应特性 总被引：1，自引：1，他引：0
基于内孤立波mKdV理论,采用时域有限位移运动方程,结合改进的Morison公式,研究了两层流体中内孤立波与带分段式悬链系泊约束半潜平台的相互作用问题。针对东沙群岛南部海域附近某实测内孤立波特征参数,计算分析了在该内孤立波作用下SEDCO-700型半潜平台的内孤立波载荷、运动响应及其系泊张力的变化特性。研究表明,内孤立波不仅会对半潜平台产生突发性冲击载荷作用,使其产生大幅度水平漂移运动,并导致其系泊张力显著增大,因此在半潜平台等深海平台的设计与应用中,内孤立波的影响是不可忽视的。 相似文献
8.
针对单点系泊(SPM)网箱系泊力大于传统网箱,离岸环境承受风浪时风险更高的问题,研究设计了一种相较传统圆形网箱拥有更小系泊力的船型网箱,运用正交原理制定了三因素三水平的试验方案,对网箱浮架进行了计算机数值模拟,分析网箱在波流共同作用下的水动力特性变化。研究表明,在兼顾经济成本与网箱安全性的条件下,长24 m,宽9 m,头部角度为60°的网箱浮架具有较优良的水动力性能和相对较低的养殖成本。该网箱系统能随着潮流改变方向而在锚点周围移动,从而极大减小网箱底部的养殖残渣堆积并降低锚固安装成本,可为我国深水网箱的发展提供一定的理论参考依据。 相似文献
9.
Fish cages in the open sea are exposed to cycle loads due to irregular wave climate during their service life, and thus the fatigue reliability assessment of mooring system should be conducted to ensure the safe operation. The aim of this study is to evaluate the fatigue failure probability of mooring system for fish cage. Numerical simulation of net cage in random waves is performed and the time dependent approach is applied to conduct the fatigue reliability analysis of shackle chains based on S-N curve method. The sensitivity analysis of fatigue reliability of mooring line to the uncertainty of random variables in the fatigue limit state is conducted. In addition, the system reliability for mooring system is analyzed and the effect of the initial pretension and safety factor on system reliability is investigated. The results indicate that a case without the initial pretension on anchor lines is helpful to decrease the failure probability of mooring system and the safety factor of mooring lines in the current regulation is conservative for the system reliability against fatigue damage. 相似文献
10.
海上浮式风力机受风、浪、流等外部载荷影响,运营期间经常处于偏航工况,给风力机基础运动响应和锚泊载荷带来重要影响.基于经典叶素动量理论及势流理论,建立海上浮式风力机水—气动力耦合分析模型,对在非定常风、不规则波浪联合作用下,风力机偏航时基础运动响应及锚泊载荷等进行分析.研究发现,额定风速工况下,风力机偏航对平台纵荡和纵摇运动影响较大,偏航30°时纵荡和纵摇平均值比偏航0°时分别下降20.68％和37.36％,垂荡运动响应受风力机偏航影响较小;锚泊载荷变化趋势与平台运动及锚链布置有关,平台纵荡对锚泊载荷影响较大,偏航30°时锚链#1有效张力平均值比偏航0°时下降12.98％. 相似文献
11.
Numerical models which account for the multiple response modes of floating wave energy converters (WECs) in operating conditions require experimental data for validation. Measurement and observation of complex hydrodynamic mechanisms are also required to inform the development of modelling tools suitable for the simulation of response to extreme waves. Experimental measurements are reported of the motion of an axisymmetric float to regular and near-focused waves. The mechanical system, incident wave conditions and response in a 2D vertical plane are detailed to facilitate comparison to numerical simulations. The system comprises a heaving float connected to a counterweight by an inextensible cable over two pulleys to provide a simplified representation of the slowly varying surge constraint of a mooring system. Translation of the float is measured using an optical encoder. Motion in heave, surge and pitch are also determined by a position identification method based on analysis of video footage. For low frequency regular waves, the float prescribes an elliptical trajectory and the variation of response amplitude with wave amplitude is linear. At higher frequencies, drift of up to one-third of the float radius is observed and the float oscillates along an arc. More complex motions are observed due to the three large amplitude waves of a near-focused wave group. During these waves the upper surfaces of the float are partly immersed and motion occurs in heave, surge and pitch. 相似文献
12.
参考英国的Kincardine风机采用的新式的Semi-Spar概念,结合spar式基础和半潜式基础的特点,提出了一种新式海上浮式风机平台模型,并基于三维势流理论,利用AQWA软件进行水动力计算,验证新式平台可靠性。分析了在风、浪、流荷载联合作用下,锚链竖向夹角、系缆数量对风机浮式平台运动性能和系泊张力的影响,对系泊系统进行优化,并验证极端工况下的可靠性。结果证明风机平台水平运动和纵摇运动幅值较小,但垂荡幅值略大,而通过减小锚链竖向夹角可以控制平台运动响应幅值,增加系缆数量可以同时减小系泊张力大小。计算结果证明了新型Semi-Spar式海上风机平台可行性,为浮式风机平台及系泊系统的设计提供参考。 相似文献
13.
14.
系泊系统是半潜式支持平台抵抗恶劣海洋环境作用、限制平台偏移、实现海上定位的重要设备，辐射状多点系泊是常用的布置方式。针对该平台系泊系统开展了设计方法和分析流程研究，阐述了系泊系统配置设计，包括系泊缆的数量、抛出长度、单根系泊缆的刚度、直径、破断负荷、定位锚的型式、最大抓力等；系泊系统的布置设计，包括系泊缆之间的水平夹角、系泊绞车、导缆器、定位锚的位置等；同时归纳风载荷、流载荷以及波浪慢漂载荷的常用估算方法；总结适用于该类平台系泊系统设计的规范要求。将上述方法和流程应用于某型半潜式支持平台系泊系统的开发和设计，采用系泊定位分析程序MIMOSA对该系统的定位能力进行分析，研究了系泊缆形状、夹角等参数随张力的变化特征，同时系泊缆按照船级社的规范要求进行衡准，反复调整和优化系泊系统的配置和布置方式，直至系泊系统满足要求，最终设计出较合适的系泊系统。相关方法、流程和结论为实际工程项目提供重要的设计思路。 相似文献
15.
Effect of Failure Mode of Taut Mooring System on the Dynamic Response of A Semi-Submersible Platform
Mooring system failure can lead to largely different dynamic response of floating structures when compared to the response under the condition of intact mooring system. For a semi-submersible platform with taut mooring system under extreme environmental conditions, the typical mooring system failure includes anchor line breaking failure due to the broken anchor line, and the anchor dragging failure caused by the anchor failure in the seabed soil due to the shortage of the anchor bearing capacity. However, study on the mooring failure caused by anchor failure is rare. The current work investigates the effect of three failure modes of taut mooring system on dynamic response of a semi-submersible platform, including one line breaking failure, two lines breaking failure, and one line breaking with one line attached anchor dragging failure. The nonlinear polynomial mooring line model in AQWA was used with integrating the load and displacement curve from the anchor pulling study to characterize the anchor dragging behavior for mooring system failure caused by the anchor failure. The offsets of the platform and the tension of mooring lines were analyzed for mooring system failure with 100-year return period. It is found that the mooring failure of one line breaking with one line attached anchor dragging is a case between the other two mooring failures. The traditional mooring analysis considering only the damaged condition with one line breaking is not safe enough. And the simple way of mooring analysis of two lines breaking is too conservative for the costly offshore engineering.
相似文献16.
Mooring tension and motion characteristics of a submerged fish reef with net in waves and currents using numerical analysis 总被引：2，自引：0，他引：2
A numerical model was used to analyze the motion response and mooring tension of a submerged fish reef system. The system included a net attached to a rigid structure suspended up from the bottom with a single, high tension mooring by fixed flotation. The analysis was performed by using a Morison equation type finite element model configured with truss elements. Input forcing parameters into the model consisted of both regular and irregular waves, with and without a steady current. Heave, surge and pitch dynamic calculations of the reef structure were made. Tension response results of the attached mooring line were also computed. Results were analyzed in both the time and frequency domain in which appropriate, linear transfer functions were calculated. The influence of the current was more evident in the tension and heave motion response data. This is most likely the result of the large buoyancy characteristics of the reef structure and the length of the mooring cable. Maximum mooring component tension was found to be 13.9 kN and occurred when the reef was subjected to irregular waves with a co-linear current of 1.0 m/s velocity. The results also showed that the system had little damping (in heave) with damped natural periods of 2.8 s. This combination of system characteristics promotes a possible resonating situation in typical open sea conditions with similar wave periods. 相似文献
17.
Sensitivity Analysis of Air Gap Motion with Respect to Wind Load and Mooring System for Semi-Submersible Platform Design 总被引：1，自引：1，他引：0
A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and potential deck impact to the semi-submersible platform. It is important to predict air gap response of platforms accurately in order to check the strength of local structures which withstand the wave slamming due to negative air gap. The wind load cannot be simulated easily by model test in towing tank whereas it can be simulated accurately in wind tunnel test. Furthermore, full scale simulation of the mooring system in model test is still a tuff work especially the stiffness of the mooring system. Owing to the above mentioned problem, the model test results are not accurate enough for air gap evaluation. The aim of this paper is to present sensitivity analysis results of air gap motion with respect to the mooring system and wind load for the design of semi-submersible platform. Though the model test results are not suitable for the direct evaluation of air gap, they can be used as a good basis for tuning the radiation damping and viscous drag in numerical simulation. In the presented design example, a numerical model is tuned and validated by ANSYS AQWA based on the model test results with a simple 4 line symmetrical horizontal soft mooring system. According to the tuned numerical model, sensitivity analysis studies of air gap motion with respect to the mooring system and wind load are performed in time domain. Three mooring systems and five simulation cases about the presented platform are simulated based on the results of wind tunnel tests and sea-keeping tests. The sensitivity analysis results are valuable for the floating platform design. 相似文献
18.
以三锚系浮标系统为研究对象,基于AQWA与OrcaFlex软件开展了三锚系大型浮标系统运动响应特性数值模拟研究。对直径10 m的浮标结构在波浪荷载下的水动力特性进行研究,校核了浮标的初稳性和大倾角稳性特征,计算分析了浮标的附加质量、辐射阻尼、运动响应幅值算子RAO等水动力参数,阐明了不同风、浪、流工况下三锚系浮标与辅助浮筒的运动响应特性,揭示了浮标三锚链导缆孔处锚泊张力随入射角度、波高和周期等的变化规律。研究结果表明：该浮标稳性和随波性能较好。与无浮筒三锚系浮标相比,带辅助浮筒的三锚系浮标系统的运动响应和锚泊张力减小,随着波高和周期增大,三锚系浮标系泊锚链的极端张力值逐渐增大,尤其是在极端海况下,迎浪向锚链极端张力急剧增大。 相似文献
19.
为研究顺应式海洋平台慢漂运动的影响因素,以截断圆柱和漂浮方箱为例进行了不规则波作用下的慢漂运动模型试验。测量了不同系泊刚度条件下的漂浮方箱以及相同系泊刚度条件下的截断圆柱和漂浮方箱在静水中自由衰减运动和在不规则波中的运动响应,并将运动响应分解成一阶波频运动响应和二阶低频运动响应,分析了系泊刚度和浮体形状对浮体运动的影响。通过物理模型试验发现了系泊刚度及浮体形状对顺应式系泊浮体一阶运动标准差和二阶低频运动平均漂移值和标准差的关系。结果表明由于顺应式浮体的固有周期远离波浪谱峰周期时,系泊刚度以及浮体形状对慢漂运动的一阶运动响应影响不大;二阶低频运动相对偏离平衡位置的平均值和标准差均随系泊刚度增大而减小,浮体形状同样对慢漂运动的二阶低频纵荡运动响应影响较大。试验结果为实际海洋工程的外形选择和系泊刚度选择提供数据支持。 相似文献
20.
A numerical model of flatfish cage is built based on the lumped mass method and the principle of rigid body kinematics. To validate the numerical model, a series of physical model tests are conducted in the wave flume. The numerical results correspond well with the data sets from physical model test. The effect of weight of bottom frame, height of fish net and net shape on motion responses of fish cage and tension force on mooring lines is then analyzed. The results indicate that the vertical displacements of float collar and bottom frame decrease with the increase in the weight of bottom frame; the maximum tension force on mooring lines increases with the increasing weight of bottom frame. The inclination angles of float collar and bottom frame decrease with the increasing net height; the maximum tension force increases obviously with the increase of net height. 相似文献