共查询到20条相似文献，搜索用时 62 毫秒
1.
The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab 相似文献
2.
从提高锚泊系统收放时效性入手,提出了一种半潜式钻井平台复合式锚泊系统组分配比优化设计方法,旨在尽可能降低复合式锚泊系统的钢链配比长度,提高收放效率。结合锚泊系统设计参数,制定优化设计准则,建立优化分析流程,采用ANSYS-AQWA建立锚泊定位半潜式平台水动力分析模型,获得平台运动参数和锚链动力参数,对平台漂移量、锚链最小安全系数、走锚临界张力、锚链最小卧底长度和起锚力进行无量纲指标分析,并综合考虑张力倾角与预张力对优化结果的影响,获得复合式锚泊系统钢链与钢缆的最优配比关系,确定最优钢链长度为395 m,较原钢链长度缩短225 m,钢链收放时间降低36%,进一步提高锚泊系统收放时效性,并降低平台可变荷载。 相似文献
3.
This study presents an analysis of a wave energy converter (WEC) system consisting of a buoy, a mooring system, and a power cable connected to a hub. The investigated WEC system is currently under full-scale testing near Runde in Norway. The purpose of the study was to investigate the characteristics of the entire system, primarily with regard to energy performance and the fatigue life of the mooring lines and power cable, considering the effects of marine biofouling and its growth on the system’s components. By means of parametric study, the energy performance and fatigue life of the mooring lines and power cable were investigated considering two mooring configurations, three biofouling conditions, four sea states in a scatter diagram, and three wave and current directions. Hydrodynamic and structural response simulations were conducted in a coupled response analysis using the DNV-GL software SESAM. Energy performance analyses and stress-based rainflow counting fatigue calculations were performed separately using an in-house code. The results show that, for a WEC system which has been deployed for 25 years, biofouling can reduce the total power absorption by up to 10% and decrease the fatigue life of the mooring lines by approximately 20%. 相似文献
4.
The factors of safety for stationkeeping systems in current standards (ISO, API) are not derived or validated using reliability analyses. As the oil and gas exploration and production is breaking new boundaries, deploying new floating systems and moving into regions with harsher environments, it is of paramount importance to understand what level of reliability these new marine structures are achieving. This paper presents a reliability analysis of the mooring system of a Floating LNG (FLNG) vessel permanently moored and permanently manned offshore North West Australia in a tropical cyclone environment. The reliability analysis addresses both the mooring chain and the pile foundation. The analysis accounts for the long term characteristics of the environment, including the short term variability, in response to a given sea state and the variability and uncertainty in strength of the mooring chain and the pile. The stationkeeping system was analysed using detailed time domain simulations, capturing system non-linearities and low frequency oscillations as well as wave frequency responses and, thereby, reducing modelling uncertainties to a minimum.It is found that for the conditions modelled, neither the chain nor the pile meet a target reliability of 10−4/annum using the factors of safety commonly used in design following current ISO and API standards. New factors of safety are proposed to achieve this target reliability. For the pile design, one complicating factor is that current design standards do not explicitly define the exceedance probability that should be associated with the characteristic value of the undrained shear strength to be used in the design. It is demonstrated that the required factor of safety is crucially dependent on the definition of this characteristic value and on the level and the type of uncertainty in the soil strength profile. A recommendation is made regarding the definition of this characteristic value and the associated factor of safety. Furthermore, it is found that designing the mooring system to an environmental condition with a return period of 10,000 yr (as an Abnormal Limit State event), and setting the factor of safety to unity, meets the target reliability of 10−4/annum for the pile, if the characteristic undrained shear strength is a lower bound, defined in this paper by the 10th percentile value. For the chain however, this target reliability is not achieved. 相似文献
5.
针对单点系泊(SPM)网箱系泊力大于传统网箱,离岸环境承受风浪时风险更高的问题,研究设计了一种相较传统圆形网箱拥有更小系泊力的船型网箱,运用正交原理制定了三因素三水平的试验方案,对网箱浮架进行了计算机数值模拟,分析网箱在波流共同作用下的水动力特性变化。研究表明,在兼顾经济成本与网箱安全性的条件下,长24 m,宽9 m,头部角度为60°的网箱浮架具有较优良的水动力性能和相对较低的养殖成本。该网箱系统能随着潮流改变方向而在锚点周围移动,从而极大减小网箱底部的养殖残渣堆积并降低锚固安装成本,可为我国深水网箱的发展提供一定的理论参考依据。 相似文献
6.
This work focuses on the effect of parameter uncertainty on the reliability index and on the predictive reliability of mooring lines for floating structures under loading from extreme sea-states. A first-order analytic formulation is developed which takes into consideration uncertain parameters in the statistical models of the maximum dynamic tension and the breaking resistance of the mooring lines. Expressions are derived for the mean and the variance of the reliability index in terms of the mean values and the covariance matrix of the uncertain parameters, and of the sensitivity of the reliability index to the uncertain parameters. The predictive reliability index is expressed in terms of the mean and the variance of the reliability index. The formulation is applied to case studies of catenary and taut-leg mooring lines of an offshore structure and the relative effects of the sources of statistical uncertainty are assessed. The case studies demonstrated the applicability and capability of the formulation to capture and represent the relative contributions of the different sources of uncertainty on the predictive reliability and predictive failure probability, as well as on the statistics of the uncertain reliability index. 相似文献
7.
Effect of Failure Mode of Taut Mooring System on the Dynamic Response of A Semi-Submersible Platform
Mooring system failure can lead to largely different dynamic response of floating structures when compared to the response under the condition of intact mooring system. For a semi-submersible platform with taut mooring system under extreme environmental conditions, the typical mooring system failure includes anchor line breaking failure due to the broken anchor line, and the anchor dragging failure caused by the anchor failure in the seabed soil due to the shortage of the anchor bearing capacity. However, study on the mooring failure caused by anchor failure is rare. The current work investigates the effect of three failure modes of taut mooring system on dynamic response of a semi-submersible platform, including one line breaking failure, two lines breaking failure, and one line breaking with one line attached anchor dragging failure. The nonlinear polynomial mooring line model in AQWA was used with integrating the load and displacement curve from the anchor pulling study to characterize the anchor dragging behavior for mooring system failure caused by the anchor failure. The offsets of the platform and the tension of mooring lines were analyzed for mooring system failure with 100-year return period. It is found that the mooring failure of one line breaking with one line attached anchor dragging is a case between the other two mooring failures. The traditional mooring analysis considering only the damaged condition with one line breaking is not safe enough. And the simple way of mooring analysis of two lines breaking is too conservative for the costly offshore engineering.
相似文献8.
设计了一种新型网箱浮架系统,利用SESAM对其进行了频域水动力分析以及考虑不规则波浪、风、流载荷和系泊共同作用的时域耦合分析,并与传统双浮管网箱浮架系统进行了分析对比,得到方形网箱与圆形网箱的水动力特性的差异以及各自的优缺点,对实际中网箱的开发设计有一定的借鉴意义;通过计算,证明新型网箱浮架系统在工作海况能正常工作,在极端海况下也能满足安全性的要求;最后对4种常见系泊方式进行了时域耦合分析,得到了四种系泊方式的系泊特性,对实际工程中系泊方式的选择有一定的参考意义。 相似文献
9.
This paper presents a simulation model based on the finite element method. The method is used to analyze the motion response and mooring line tension of the flatfish cage system in waves. The cage system consists of top frames, netting, mooring lines, bottom frames, and floats. A series of scaled physical model tests in regular waves are conducted to verify the numerical model. The comparison results show that the simulated and the experimental results agree well under the wave conditions, and the maximum pitch of the bottom frame with two orientations is about 12o. The motion process of the whole cage system in the wave can be described with the computer visualized technology. Then, the mooring line tensions and the motion of the bottom frame with three kinds of weight are calculated under different wave conditions. According to the numerical results, the differences in mooring line tensions of flatfish cages with three weight modes are indistinct. The maximum pitch of the bottom frame decreases with the increase of the bottom weight. 相似文献
10.
Failure of net cage and mooring system is of great concern to the marine aquaculture industry. To avoid the structure failure in storm waves and current during typhoon events, net cage can submerge below the water surface in practice. A submersible net cage and mooring system is analyzed by numerical simulation and physical model test. The numerical model is established based on the lumped mass method and principle of rigid body kinematics. A series of physical model tests are conducted to validate the numerical model of single net cage and grid mooring system in waves and current. Numerical results correspond well with data obtained from physical model test. The results indicate that when net cage is submerged below the water surface, the deformation of net cage in waves can be improved significantly, and the tension force on the anchor line, bridle line and grid line will decrease significantly. However, the tension force on the buoy line in the submergence condition is larger than that in the floating condition. Different relative submergence ratios are also considered in our numerical simulation, and a relative submergence ratio equal to 0.1 is suggested here. The tension reduction ratio (56%) for the four-cage system is larger than that for the single-cage (52%) and double-cage systems (44%). 相似文献
11.
The characteristics of waves, winds and currents in a tropical cyclone environment differ significantly from those in a winter storm environment, like the North Sea. This can have a significant effect on the reliability of a mooring system that is designed to satisfy 100 yr conditions with specified Factors of Safety in accordance with ISO19901-7 or API RP 2SK. This paper presents reliability analysis of the mooring system of a permanently connected Floating LNG vessel, placed at two locations: (a) a tropical cyclone environment of the North West Shelf of Australia and (b) a winter storm environment of the North Sea. It is demonstrated that as a result of differences in the long term distribution of environmental parameters (waves, winds) between a North Sea environment and a tropical cyclone environment, the long term distribution of the mooring line response differs significantly in these two locations.This paper shows that a mooring system which is designed in accordance with ISO (or API), in these two environments, will achieve very different reliability levels because of the significant differences in environmental characteristics. In order to achieve the same reliability for the mooring system at these two geographical locations, Factors of Safety for use with 100 yr environmental conditions (Ultimate Limit State) were derived to achieve the same target probability of failure of 10−4/annum. It was found that for the North Sea environment, a factor of 1.5 is required for both the mooring chain and the pile, while for the tropical cyclone environment the required Factor of Safety has to be increased to 2.1. These differences are very significant and design standards need to be revised to reflect these findings. 相似文献
12.
Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms.For the rational estimation of the safety levels of aging platforms,a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper.The base shear capacity is taken as the global ultimate strength of the offshore plaffoms,it is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagation.And the corrosion and fatigue crack growth rates in the main members and key joints are modeled as random variables.A simulation method of the extreme wave loads which are applied to the structures of offshore platforms is proposed too.Furthermore,the statistics of global base shear capacity and extreme wave loads are obtained by Monte Carlo simulation method.On the basis of the limit state equation of global failure mode,the instantaneous reliability and time dependent reliability assessment methods are both presented in this paper.Finally the instantaueous reliability index and time dependent failure probability of a jacket platform are estimated with different ages in the demonstration example. 相似文献
13.
Precisely predicting the fatigue life of taut-wire mooring systems has become an interesting and important problem for scientists and engineers since there are still difficulties in the inspection and maintenance of mooring lines in a rough sea environment especially in deep waters. In this paper, a comprehensive fatigue analysis is performed for a polyester taut-wire mooring system of an FPSO based on the time domain dynamic theory, rainflow cycle counting method and linear damage accumulation rule of Palmgren-Miner. Three influential factors in the fatigue analysis including the pre-tension, dynamic stiffness and T-N curve are investigated in detail. Two polyester T-N curves, one is from the DNV- OS-E301 and the other is from the API-RP-2SM, are adopted in the calculation. The fatigue analysis of the mooring system after one-line failure is also carried out. The calculation results indicate that the fatigue life is significantly affected by the T-N curve. The fatigue life decreases with increasing pre-tension, and is largely reduced if taking into account the dynamic stiffness caused by cyclic loading. The analysis also proves that one-line failure has remarkable effects on the fatigue lives of other mooring lines. The present parametric and comparative study is believed to be meaningful to further understanding of the taut-wire mooring system for deepwater applications. 相似文献
14.
Based on the lumped-mass method and rigid-body kinematics theory, a mathematical model of a gravity cage system attacked by irregular waves is developed to simulate the hydrodynamic response of cage system, including the maximum tension of mooring lines and the motion of float collar. The normalized response amplitudes (response amplitude operators) are calculated for the cage motion response in heave and surge, and the mooring line tension response, in regular waves. In addition, a statistical approach is taken to determine the motion and tension transfer functions in irregular waves. In order to validate the numerical model of a gravity cage attacked by irregular waves, numerical predictions have been compared with the experimental observations in the time and frequency domain. The effect of wave incident angle on the float collar motion, mooring line tension and net volume reduction of the gravity cage system in irregular waves is also investigated. The results show that at high frequencies, the cage system has no significant heave motion. It tends to contour itself to longer waves. The variation amplitude of mooring line forces decreases as the wave frequency increases. With the increasing of wave incident angle, the horizontal displacement of the float collar increases. 相似文献
15.
《中国海洋工程》2021,(3)
The fish cage design requires accurate predictions of long-term extreme loads and responses. Compared with the time-consuming full long-term analysis method integrating all the probability distribution of the short-term extremes,the environmental contour method gains much attention in predicting the long-term extreme values due to the less computational effort. This paper investigates the long-term extreme response of a fish cage using the environmental contour method. The fish cage is numerically simulated based on the lumped-mass method and the curved beam theory. Based on the one-dimensional(1D) and two-dimensional(2D) environmental contour, the extreme responses,including the surge and heave motions, mooring force, and vertical bending of the floater, are predicted for different return periods and compared with the full long-term analysis results. Results indicate that the 1D method greatly underestimates the extreme values. The 2D environmental contour method with a higher percentile level, namely90%, provides reasonable estimations and seems to be suitable for the long-term value analysis. Sensitivity studies show that the mooring arrangement and the bending stiffness have great effects on the bending moment and the mooring force and the mooring line pre-tension has minor effects on the fish cage response. 相似文献
16.
17.
18.
The construction of a suspension bridge with floating pylons or a submerged floating tunnel requires the installation of a mooring system. The option of taut vertical tethers, similar to those used in tension-leg platforms, has been suggested in preliminary designs. The environmental loading on the tether, mainly due to wind waves and swell, results in a parametrically excited system. Certain loading conditions develop instabilities that translate into large horizontal motion. However, the effects of parametric resonance on the tension values have rarely been investigated. This paper aims to clarify the relation between lateral displacement and tether tension and to quantify the extreme tension values in the event of parametric resonance. The presented analysis is based on a full numerical model of the tether that includes geometric and hydrodynamic nonlinear effects. This model is used to investigate a representative example that illustrates parametric resonance and multiple parametric studies to assess the effects of the excitation frequency, amplitude, initial pretension, tether length and inclination angle on the tether’s response. The results reported here provide the basis for a recommendation on designing a tether under parametric resonance regarding the ultimate extreme values and fatigue life. 相似文献
19.
A numerical model of flatfish cage is built based on the lumped mass method and the principle of rigid body kinematics. To validate the numerical model, a series of physical model tests are conducted in the wave flume. The numerical results correspond well with the data sets from physical model test. The effect of weight of bottom frame, height of fish net and net shape on motion responses of fish cage and tension force on mooring lines is then analyzed. The results indicate that the vertical displacements of float collar and bottom frame decrease with the increase in the weight of bottom frame; the maximum tension force on mooring lines increases with the increasing weight of bottom frame. The inclination angles of float collar and bottom frame decrease with the increasing net height; the maximum tension force increases obviously with the increase of net height. 相似文献
20.
Alberto Omar Vazquez-Hernandez Gilberto Bruno Ellwanger Luís Volnei Sudati Sagrilo 《Applied Ocean Research》2006,28(6):398-406
The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level. 相似文献