共查询到20条相似文献，搜索用时 78 毫秒
1.
The characteristics of waves, winds and currents in a tropical cyclone environment differ significantly from those in a winter storm environment, like the North Sea. This can have a significant effect on the reliability of a mooring system that is designed to satisfy 100 yr conditions with specified Factors of Safety in accordance with ISO19901-7 or API RP 2SK. This paper presents reliability analysis of the mooring system of a permanently connected Floating LNG vessel, placed at two locations: (a) a tropical cyclone environment of the North West Shelf of Australia and (b) a winter storm environment of the North Sea. It is demonstrated that as a result of differences in the long term distribution of environmental parameters (waves, winds) between a North Sea environment and a tropical cyclone environment, the long term distribution of the mooring line response differs significantly in these two locations.This paper shows that a mooring system which is designed in accordance with ISO (or API), in these two environments, will achieve very different reliability levels because of the significant differences in environmental characteristics. In order to achieve the same reliability for the mooring system at these two geographical locations, Factors of Safety for use with 100 yr environmental conditions (Ultimate Limit State) were derived to achieve the same target probability of failure of 10−4/annum. It was found that for the North Sea environment, a factor of 1.5 is required for both the mooring chain and the pile, while for the tropical cyclone environment the required Factor of Safety has to be increased to 2.1. These differences are very significant and design standards need to be revised to reflect these findings. 相似文献
2.
随着海底油气资源的不断开发,单点系泊工程在海上的应用越来越广泛,系泊方式也从锚泊为主逐渐转为桩泊,本文以调西南油气开发项目涸州近岸单点系泊工程为例,系统介绍了采用国际常用API－RPZA规范进行锚桩计算分析的步骤与方法。 相似文献
3.
Alberto Omar Vazquez-Hernandez Gilberto Bruno Ellwanger Luís Volnei Sudati Sagrilo 《Applied Ocean Research》2006,28(6):398-406
The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level. 相似文献
4.
5.
The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab 相似文献
6.
从提高锚泊系统收放时效性入手,提出了一种半潜式钻井平台复合式锚泊系统组分配比优化设计方法,旨在尽可能降低复合式锚泊系统的钢链配比长度,提高收放效率。结合锚泊系统设计参数,制定优化设计准则,建立优化分析流程,采用ANSYS-AQWA建立锚泊定位半潜式平台水动力分析模型,获得平台运动参数和锚链动力参数,对平台漂移量、锚链最小安全系数、走锚临界张力、锚链最小卧底长度和起锚力进行无量纲指标分析,并综合考虑张力倾角与预张力对优化结果的影响,获得复合式锚泊系统钢链与钢缆的最优配比关系,确定最优钢链长度为395 m,较原钢链长度缩短225 m,钢链收放时间降低36%,进一步提高锚泊系统收放时效性,并降低平台可变荷载。 相似文献
7.
Jingbo Su Jianfeng Li Ruihu Zhu Wanggen Qin Qiu Zhai 《Marine Georesources & Geotechnology》2016,34(7):689-702
To assess the impact of pile driving on adjacent submarine pipelines during the reconstruction of a pier berth, the local damage model of submarine pipelines is established to explore the safety thresholds of the particle peak velocity and horizontal displacement. The results are analyzed and adjusted by the existing standards and the corresponding literatures. Then, a three-dimensional numerical model is presented to assess the feasibility of the construction of piles by the obtained safety limits, in which the nonlinear behavior of the soil and stress–seepage coupling analysis are considered. After the construction, the safety of submarine pipelines is rechecked by the measured value of the particle peak velocity and horizontal displacement. Meanwhile, the propagation law of vibration, the horizontal displacement of underground soil, and the pore pressure during pile driving are explored. The results indicate that the construction of piles of 2# mooring pier did not cause damage to adjacent submarine pipelines. However, the construction of piles of 1# mooring pier which is nearer may cause damage to submarine pipelines. 相似文献
8.
在热带地区开展水运工程设计施工项目，经常会遇到珊瑚砂地质，其力学特性较为特别，强度低、易碎、黏性低，力学指标变异性较大，国内现有设计规范对珊瑚砂地质条件特殊性考虑不足，设计人员在相关设计参数选取时经常忽略采用可靠度理论进行结构安全复核。以马尔代夫机场扩建项目为案例，运用可靠度理论分析了珊瑚砂力学指标的高变异性对钢板桩结构稳定可靠度的影响。根据分析，在珊瑚砂地质条件下，按照《码头结构设计规范》（JTS167-2018）进行稳定性计算，得出的结果偏于危险，应引起结构设计人员的重视。在进行结构设计时，应同时按照《港口工程结构可靠性设计统一标准》（GB50158-2010）复核板桩结构可靠度。同时，珊瑚砂较小的黏性，在进行结构可靠度计算时可以忽略。 相似文献
9.
Fish cages in the open sea are exposed to cycle loads due to irregular wave climate during their service life, and thus the fatigue reliability assessment of mooring system should be conducted to ensure the safe operation. The aim of this study is to evaluate the fatigue failure probability of mooring system for fish cage. Numerical simulation of net cage in random waves is performed and the time dependent approach is applied to conduct the fatigue reliability analysis of shackle chains based on S-N curve method. The sensitivity analysis of fatigue reliability of mooring line to the uncertainty of random variables in the fatigue limit state is conducted. In addition, the system reliability for mooring system is analyzed and the effect of the initial pretension and safety factor on system reliability is investigated. The results indicate that a case without the initial pretension on anchor lines is helpful to decrease the failure probability of mooring system and the safety factor of mooring lines in the current regulation is conservative for the system reliability against fatigue damage. 相似文献
10.
近年来,国内兴起了大力发展半潜式起重平台的势头,系泊系统的设计与优化是该类型平台开发中的关键问题之一。采用时域方法对半潜式起重平台系泊系统进行耦合动力分析,研究系泊系统主要参数对其动力响应特性的影响,并给出主要参数的设计优化流程,在此基础上,以能够满足安全校核且性能较优的系泊方案为目标,对该半潜式起重平台的系泊系统进行优化设计,并研究单根系泊缆发生破断对整个系泊系统的影响。结果表明:基于主要参数对系泊性能的影响规律,经优化设计得到的系泊方案,预留的安全欲度适中,能够保障半潜式起重平台在恶劣海况下的生存能力,同时具备较好的经济性。 相似文献
11.
12.
Mooring systems typically consist of an anchor and a mooring line and chain that connect the anchor to the floating infrastructure. When the anchor connection point (the ‘padeye’) is below the seabed surface, the interaction between the chain and the seabed will affect the amount of load transferred to the anchor and the load angle at the padeye. Reliable methods are needed therefore to assess these aspects in order to determine appropriate anchor design.Available solutions for the interaction between soil and chain generally ignore any reduction in the undrained shear strength of the soil as it is remoulded under the large strains associated with tensioning of the anchor chain. This is an unconservative assumption for anchor design, hence providing motivation for the study presented here. The system behaviour and the interaction of short chain segments with the seabed have been studied using a coupled Eulerian-Lagrangian (CEL) approach. The findings have led to two new design approaches that encapsulate how remoulding of the soil (which affects sliding resistance more than bearing resistance) affects the chain system response. Calculations using these methods captured the modelled chain system response well. Both the global chain analyses and the proposed design approaches suggest that approximately the entire chain load at the seabed surface (the ‘mudline’) is likely to be transferred to the anchor padeye, challenging conventional design practice. 相似文献
13.
波浪能是一种清洁、可再生的新型能源，波浪能发电装置在海上作业时会受到变化的风、浪、流载荷作用，需要系泊系统保证其稳性和安全性。以适用于中国南海500 m水深的振荡双浮体式波浪能发电装置为研究对象，运用频域计算与时域计算结合的方法对双浮体及其系泊系统的运动响应和动力载荷进行计算，获取极端海况与工作海况下浮体运动和系泊缆索张力的时历数据。参照BV船级社NR-493规定的海上浮式结构物系泊安全系数规范，对3种系泊方案进行安全校核和对比分析。选定其中一种系泊方案，通过改变系泊系统以及能量转换器（PTO）的参数，探究参数变化对双体波浪能装置运动响应以及系泊系统特性的影响，为类似应用于深水的双体波浪能装置系泊系统的设计提供参考。 相似文献
14.
15.
AbstractPile foundation is the most popular option for the foundation of offshore wind turbines. The degradation of stiffness and bearing capacity of pile foundation induced by cyclic loading will be harmful for structure safety. In this article, a modified undrained elastic–plastic model considering the cyclic degradation of clay soil is proposed, and a simplified calculation method (SCM) based on shear displacement method is presented to calculate the axial degradated capacity of a single pile foundation for offshore wind turbines resisting cyclic loadings. The conception of plastic zone thickness Rp is introduced to obtain the function between accumulated plastic strain and displacement of soil around pile side. The axial ultimate capacity of single piles under axial cyclic loading calculated by this simplified analysis have a good consistency with the results from the finite element analysis, which verifies the accuracy and reliability of this method. As an instance, the behavior of pile foundation of an offshore wind farm under cyclic load is studied using the proposed numerical method and SCM. This simplified method may provide valuable reference for engineering design. 相似文献
16.
参考英国的Kincardine风机采用的新式的Semi-Spar概念,结合spar式基础和半潜式基础的特点,提出了一种新式海上浮式风机平台模型,并基于三维势流理论,利用AQWA软件进行水动力计算,验证新式平台可靠性。分析了在风、浪、流荷载联合作用下,锚链竖向夹角、系缆数量对风机浮式平台运动性能和系泊张力的影响,对系泊系统进行优化,并验证极端工况下的可靠性。结果证明风机平台水平运动和纵摇运动幅值较小,但垂荡幅值略大,而通过减小锚链竖向夹角可以控制平台运动响应幅值,增加系缆数量可以同时减小系泊张力大小。计算结果证明了新型Semi-Spar式海上风机平台可行性,为浮式风机平台及系泊系统的设计提供参考。 相似文献
17.
考虑软土蠕变导致的土体抗剪强度的衰减效应,建立了软土长期强度模型,用以量化由于土体蠕变导致的土体抗剪强度参数随时间的变化规律。将时变可靠度理论结合有限元强度折减法,提出了考虑软土蠕变对强度影响的高桩码头岸坡时变可靠度算法。采用拉丁超立方抽样方法来改进传统蒙特卡罗法的随机抽样过程,提高计算效率。针对某一岸坡实例,将采用本文算法计算得到的可靠度结果与其他算法评估的结果进行对比分析,验证本文算法的可靠性。最后以我国沿海某高桩码头岸坡为例,基于本文算法评估了该码头岸坡的时变可靠度,分析了岸坡稳定性的时变规律。文中提出的时变可靠度分析方法不仅可以为在役高桩码头岸坡的安全评估提供强有力的技术支撑,同时也能为一些新建工程项目提供一定的参考应用价值。 相似文献
18.
1.IntroductionLoad and Resistance Factor Design(LRFD)isthe commonly adoptedreliability-based designfor-mat for structural design(CNE,1990;AAHTO,1994;OMTC,1983;CMC,1984).Code calibra-tionforthe LRFDformat is a processto determinethetarget reliability by de… 相似文献
19.
20.
Xie Wei Tang Xinming Engineer China Offshore Oil Development & Engineering Corporation Tianjin 《中国海洋工程》1993,(3)
The quasi-static analysis method introduced by API RP 2P is well known and accepted as a very useful mooring analysis method. In the early design stage, this method is widely used for preliminary analysis and mooring parameter selection. However, the quasi-static method of API RP 2P is developed for single-floating-body condition, i. e., only one floating body is considered in the computation procedure. Difficulties arise when it is used for the analysis of a CALM system, which is comprised of two floating bodies (tanker and buoy). This paper presents an analysis procedure for a two-floating-body system based on the quasi-static procedure of API RP 2P with some modifications reflecting special characteristics of the CALM system. Finally, the analysis results of a CALM system are given to illustrate the use of this procedure. 相似文献