共查询到20条相似文献，搜索用时 31 毫秒
1.
Sixteen bottled waters of various Sicilian brands, 11 natural mineral waters and five normal drinking waters, were analyzed for major and trace inorganic components by ion chromatography (IC) and inductively coupled plasma-mass spectrometry (ICP-MS), respectively. The bottled waters represent a variety of water types with significantly different compositions in terms of salinity, major components and trace elements. Chemically, they range from Ca–HCO3 and Ca–SO4 to Na–HCO3 types. Total dissolved solids ranges from 54 to 433 mg/L, total hardness from 25 to 238 mg/L CaCO3, and measured Na content from 5.7 to 57 mg/L. According to total dissolved ions, all the bottled waters were classified as oligomineral (50 < TDS < 500 mg/L). All the bottled waters analyzed here had elemental concentrations which did not exceed the guideline and directive values, although a high concentration of Al was noted for one bottled water (O7, central Sicily) and high Rb and V in a bottled water (O1) from the Etna volcanic area. With regard to trace elements, the chemical quality of bottled waters was assessed by a metal index (MI). Chemical characteristics were compared with 10 tap water samples from private houses or public places, representative of the public water supply in Palermo, the largest and most densely populated city in Sicily. The municipal waters analyzed, belonging to HCO3-alkaline earth and Cl–SO4-alkaline earth waters, showed concentrations of chemical inorganic components well within drinking water limits. The data also indicated that the water supplied by the municipal authority is of fair quality, although fairly hard and high in Na concentration. Several considerations indicate that there is no sufficient reason to prefer bottled waters to tap waters. 相似文献
2.
The Imphal valley is an intramontane basin confined within an anticlinorium of several anticlines and synclines in the Disang Group of rocks of Tertiary age. This valley of more than 2 million people is occupied by fluvio-lacustrine deposits of Quaternary age and is located in the central part of the Indo-Myanmar range of Northeast India. The hydrogeochemical parameters of temperature, pH, ORP, TDS, Na, Cl, Br, Ba, B, Sr, Li, δ18O, HCO3, K, Mg, Ca, NO3, PO4, SO4 in 173 samples using ion-chromatograph, ICP (AES), ICP (OES), ICP (MS) and 37 dugwells were studied to understand the occurrence and origin of salinization process for the first time. The order of abundance of ions is identified as HCO3 > Na > Cl > Ca > Mg > K > NO3 > PO4 > Sr > Br > B>Ba > Li > SO4. Five hydrochemical facies (Na–Cl, Ca–Mg–HCO3, Na–HCO3, Ca–Mg–HCO3–Cl and Ca–Mg–Cl) represent the types of waters. The saline-dominated water types (Na–Cl and Na–HCO3) represent piedmont and the rest of the facies represent alluvial plain and flood plain groundwaters. Durov’s diagram reveales initial and intermediate stages of groundwater evolution. Isotope δ18O, Gibbs diagram and ions scatter plots suggest evaporation and crystallization processes leading to halite encrustation in the Disang shales. Negative Eh, low NO3 and the absence of SO4 indicates reduced condition coupled with rich dissolve organic matters leading to elevation of salts in soils around piedmont where the rock type is exclusively of the Disang shales. Trilinear plot, correlation matrix and water table flow analysis suggest salinization of groundwater originates in piedmont groundwater and disseminates towards alluvial plain and flood plain along the flow path. 相似文献
3.
Exploration of unconventional natural gas reservoirs such as impermeable shale basins through the use of horizontal drilling and hydraulic fracturing has changed the energy landscape in the USA providing a vast new energy source. The accelerated production of natural gas has triggered a debate concerning the safety and possible environmental impacts of these operations. This study investigates one of the critical aspects of the environmental effects; the possible degradation of water quality in shallow aquifers overlying producing shale formations. The geochemistry of domestic groundwater wells was investigated in aquifers overlying the Fayetteville Shale in north-central Arkansas, where approximately 4000 wells have been drilled since 2004 to extract unconventional natural gas. Monitoring was performed on 127 drinking water wells and the geochemistry of major ions, trace metals, CH4 gas content and its C isotopes (δ13CCH4), and select isotope tracers (δ11B, 87Sr/86Sr, δ2H, δ18O, δ13CDIC) compared to the composition of flowback-water samples directly from Fayetteville Shale gas wells. Dissolved CH4 was detected in 63% of the drinking-water wells (32 of 51 samples), but only six wells exceeded concentrations of 0.5 mg CH4/L. The δ13CCH4 of dissolved CH4 ranged from −42.3‰ to −74.7‰, with the most negative values characteristic of a biogenic source also associated with the highest observed CH4 concentrations, with a possible minor contribution of trace amounts of thermogenic CH4. The majority of these values are distinct from the reported thermogenic composition of the Fayetteville Shale gas (δ13CCH4 = −35.4‰ to −41.9‰). Based on major element chemistry, four shallow groundwater types were identified: (1) low (<100 mg/L) total dissolved solids (TDS), (2) TDS > 100 mg/L and Ca–HCO3 dominated, (3) TDS > 100 mg/L and Na–HCO3 dominated, and (4) slightly saline groundwater with TDS > 100 mg/L and Cl > 20 mg/L with elevated Br/Cl ratios (>0.001). The Sr (87Sr/86Sr = 0.7097–0.7166), C (δ13CDIC = −21.3‰ to −4.7‰), and B (δ11B = 3.9–32.9‰) isotopes clearly reflect water–rock interactions within the aquifer rocks, while the stable O and H isotopic composition mimics the local meteoric water composition. Overall, there was a geochemical gradient from low-mineralized recharge water to more evolved Ca–HCO3, and higher-mineralized Na–HCO3 composition generated by a combination of carbonate dissolution, silicate weathering, and reverse base-exchange reactions. The chemical and isotopic compositions of the bulk shallow groundwater samples were distinct from the Na–Cl type Fayetteville flowback/produced waters (TDS ∼10,000–20,000 mg/L). Yet, the high Br/Cl variations in a small subset of saline shallow groundwater suggest that they were derived from dilution of saline water similar to the brine in the Fayetteville Shale. Nonetheless, no spatial relationship was found between CH4 and salinity occurrences in shallow drinking water wells with proximity to shale-gas drilling sites. The integration of multiple geochemical and isotopic proxies shows no direct evidence of contamination in shallow drinking-water aquifers associated with natural gas extraction from the Fayetteville Shale. 相似文献
4.
《Chemie der Erde / Geochemistry》2016,76(1):63-75
Geothermal resources are very rich in Yunnan, China. However, source of dissolved solutes in geothermal water and chemical evolution processes remain unclear. Geochemical and isotopic studies on geothermal springs and river waters were conducted in different petrological-tectonic units of western Yunnan, China. Geothermal waters contain Ca–HCO3, Na–HCO3, and Na (Ca)–SO4 type, and demonstrate strong rock-related trace elemental distributions. Enhanced water–rock interaction increases the concentration of major and trace elements of geothermal waters. The chemical compositions of geothermal waters in the Rehai geothermal field are very complicated and different because of the magma chamber developed at the shallow depth in this area. In this geothermal field, neutral-alkaline geothermal waters with high Cl, B, Li, Rb Cs, As, Sb, and Tl contents and acid–sulfate waters with high Al, Mn, Fe, and Pb contents are both controlled by magma degassing and water–rock interaction. Geothermal waters from metamorphic, granite, and sedimentary regions (except in the Rehai area) exhibit varying B contents ranging from 3.31 mg/L to 4.49 mg/L, 0.23 mg/L to 1.24 mg/L, and <0.07 mg/L, respectively, and their corresponding δ11B values range from −4.95‰ to −9.45‰, −2.57‰ to −8.85‰, and −4.02‰ to +0.06‰. The B contents of these geothermal waters are mainly controlled by leaching host rocks in the reservoir, and their δ11B values usually decrease and achieve further equilibrium with its surrounding rocks, which can also be proven by the positive δ18O-shift. In addition to fluid–rock reactions, the geothermal waters from Rehai hot springs exhibit higher δ11B values (−3.43‰ to +1.54‰) than those yielded from other areas because mixing with the magmatic fluids from the shallow magma. The highest δ11B of steam–heated waters (pH 3.25) from the Zhenzhu spring in Rehai is caused by the fractionation induced by pH and the phase separation of coexisting steam and fluids. Given the strong water–rock interaction, some geothermal springs in western Yunnan show reservoir temperatures higher than 180 °C, which demonstrate potential for electricity generation and direct-use applications. The most potential geothermal field in western Yunnan is located in the Rehai area because of the heat transfer from the shallow magma chamber. 相似文献
5.
The present work was carried out in Nalbari district of Assam (India) with an objective to assess the quality of groundwater and to check its suitability for drinking and irrigation purposes. Groundwater samples were collected from 50 different locations during pre- and post-monsoon seasons of 2016. Results of chemical analysis revealed that mean concentration of cations varied in the order Ca2+?>?Na+?>?Mg2+?>?K+, while for anions the order was HCO3 ??>?Cl??>?SO42??>?NO32??>?F? during both pre- and post-monsoon seasons. The suitability of groundwater samples for drinking purpose was assessed by comparing the results of physico-chemical analysis of groundwater with Indian Standards. Further, its suitability for irrigation purpose was assessed by evaluating several parameters like sodium adsorption ratio (SAR), sodium percentage (Na%), magnesium ratio, Kelly’s ratio and residual sodium carbonate (RSC). The SAR values obtained for all the samples were plotted against EC values in the US Salinity Laboratory diagram, and it was revealed that the most of the samples fall under water type C2-S1 indicating medium salinity and low SAR. Further, it was found that the majority of the samples belong to Ca–Mg–HCO3 hydrochemical facies followed by Ca–Mg–Cl–SO4, whereas only a few samples belong to Na–K–HCO3 hydrochemical facies. 相似文献
6.
The near-surface water cycle in a geologically complex area comprises very different sources including meteoric, metamorphic and magmatic ones. Fluids from these sources can react with sedimentary, magmatic and/or metamorphic rocks at various depths. The current study reports a large number of major, minor and trace element analyses of meteoric, mineral, thermal and mine waters from a geologically well-known and variable area of about 200 × 150 km in SW Germany. The geology of this area comprises a Variscan granitic and gneissic basement overlain in parts by Triassic and Jurassic shales, sandstones and limestones. In both the basement and the sedimentary rocks, hydrothermal mineralization occurs (including Pb, Cu, As, Zn, U, Co and many others) which were mined in former times. Mineral waters, thermal waters and meteoric waters flowing through abandoned mines (mine waters) are distributed throughout the area, although the mine waters concentrate in and around the Schwarzwald.The present analyses show, that the major element composition of a particular water is determined by the type of surrounding rock (e.g., crystalline or sedimentary rocks) and the depth from which the water originates. For waters from crystalline rocks it is the origin of the water that determines whether the sample is Na–Cl dominant (deeper origin) or Ca–HCO3 dominant (shallow origin). In contrast, compositions of waters from sedimentary rocks are determined by the availability of easily soluble minerals like calcite (Ca–HCO3 dominant), halite (Na–Cl dominant) or gypsum (Ca–SO4 dominant). Major element data alone cannot, therefore, be used to trace the origin of a water. However, the combination of major element composition with trace element data can provide further information with respect to flow paths and fluid–rock interaction processes. Accordingly, trace element analyses showed, that:
- −Ce anomalies can be used as an indicator for the origin of a water. Whereas surface waters have negative or strongly negative Ce anomalies, waters originating from greater depths show no or only weak negative Ce anomalies.
- −Eu anomalies can be used to differentiate between host rocks. Waters from gneisses display positive Eu anomalies, whereas waters from granites have negative ones. Waters from sedimentary rocks do not display any Eu anomalies.
- −Rb and Cs can also be indicators for the rock with which the fluid interacted: Rb and Cs correlate positively in most waters with Rb/Cs ratios of ∼2, which suggests that these waters are in equilibrium with the clay minerals in the rocks. Rb/Cs ratios >5 indicate reaction of a water with existing clay minerals, whereas Rb/Cs ratios <2 are probably related to host rock alteration and clay mineral formation.
7.
Assessment of groundwater quality and hydrochemical characteristics in Farashband plain,Iran 总被引：1，自引：0，他引：1
Groundwater in Farashband plain, Southern Iran, is the main source of water for domestic and agricultural uses. This study was carried out to assess the overall water quality and identify major variables affecting the groundwater quality in Farashband plain. The hydrochemical study was undertaken by randomly collecting 84 groundwater samples from observation wells located in 13 different stations covering the entire plain in order to assess the quality of the groundwater through analysis of major ions. The water samples were analyzed for various physicochemical attributes. Groundwater is slightly alkaline and largely varies in chemical composition; e.g., electrical conductivity (EC) ranges from 2314 to 12,678 μS/cm. All the samples have total dissolved solid values above the desirable limit and belong to a very hard type. The abundance of the major ions is as follows: Na+ > Ca2+ > Ma2+ > K+ and Cl? > SO4 2– > HCO3 ?. Interpretation of analytical data shows three major hydrochemical facies (Ca–Cl, Na–Cl, and mixed Ca–Mg–Cl) in the study area. Salinity, total dissolved solids, total hardness, and sodium percentage (Na%) indicate that most of the groundwater samples are not suitable for irrigation as well as for domestic purposes and far from drinking water standard. A comparison of groundwater quality in relation to drinking water standards showed that most of the water samples are not suitable for drinking purposes. Based on the US salinity diagram, most of samples belong to high salinity and low to very high sodium type. 相似文献
8.
D.V. Reddy P. Nagabhushanam B.S. Sukhija A.G.S. Reddy P.L. Smedley 《Chemical Geology》2010,269(3-4):278-289
High concentrations of fluoride (up to 7.6 mg/L) are a recognized feature of the Wailapally granitic aquifer of Nalgonda District, Andhra Pradesh, India. The basement rocks provide abundant sources of F in the form of amphibole, biotite, fluorite and apatite. The whole-rock concentrations of F in the aquifer are in the range 240–990 mg/kg. Calcretes from the shallow weathered horizons also contain comparably high concentrations of F (635–950 mg/kg). The concentrations of water-soluble F in the granitic rocks and the calcretes are usually low (1% of the total or less) but broadly correlate with the concentrations observed in groundwaters in the local vicinity. The water-soluble fraction of fluoride is relatively high in weathered calcretes compared to fresh calcretes.Groundwater major-ion composition shows a well-defined trend with flow downgradient in the Wailapally aquifer, from Na–Ca–HCO3-dominated waters in the recharge area at the upper part of the catchment, through to Na–Mg–HCO3 and ultimately to Na–HCO3 and Na–HCO3–Cl types in the discharge area in the lowest part. The evolution occurs over a reach spanning some 17 km. Groundwater chemistry evolves by silicate weathering reactions, although groundwaters rapidly reach equilibrium with carbonate minerals, favouring precipitation of calcite, and ultimately dolomite in the lower parts of the watershed. This precipitation is also aided by evapotranspiration. Decreasing Ca activity downgradient leads to a dominance of fluorite-undersaturated conditions and consequently to mobilisation of F. Despite the clear downgradient evolution of major-ion chemistry, concentrations of F remain relatively uniform in the fluorite-undersaturated groundwaters, most being in the range 3.0–7.6 mg/L. The rather narrow range is attributed to a mechanism of co-precipitation with and/or adsorption to calcrete in the lower sections of the aquifer. The model may find application in other high-F groundwaters from granitic aquifers of semi-arid regions. 相似文献
9.
M. V. Prasanna S. Chidambaram G. Senthil Kumar AL Ramanathan H. C. Nainwal 《Arabian Journal of Geosciences》2011,4(1-2):319-330
In the light of progressive depletion of groundwater reservoir and water quality deterioration of the Neyveli basin, an investigation on dissolved major constituents in 25 groundwater samples was performed. The main objective was detection of processes for the geochemical assessment throughout the area. Neyveli aquifer is intensively inhabited during the last decenniums, leading to expansion of the residential and agricultural area. Besides semi-aridity, rapid social and economic development stimulates greater demand for water, which is gradually fulfilled by groundwater extraction. Groundwaters of the study area are characterized by the dominance of Na?+?K over Ca?+?Mg. HCO3 was found to be the dominant anion followed by Cl and SO4. High positive correlation was obtained among the following ions: Ca–Mg, Cl–Ca,Mg, Na–K, HCO3–H4SiO4, and F–K. The hydrochemical types in the area can be divided into two major groups: the first group includes mixed Ca–Mg–Cl and Ca–Cl types. The second group comprises mixed Ca–Na–HCO3 and Ca–HCO3 types. Most of the groundwater samples are within the permissible limit of WHO standard. Interpretation of data suggests that weathering, ion exchange reactions, and evaporation to some extent are the dominant factors that determine the major ionic composition in the study area. 相似文献
10.
《Chemie der Erde / Geochemistry》2016,76(2):243-255
A detail investigation was carried out to improve the current knowledge of groundwater salinisation processes in coastal aquifers using hydrochemical and isotopic parameters. Data of major ions for 40 wells located in the Salalah plain aquifer, Sultanate of Oman, were collected during pre-monsoon 2004 and analysed. The groundwater changes along the general flow path towards the coast from fresh (EC < 1500 μS/cm), brackish (EC: 1500–3000 μS/cm) and saline (EC > 3000 μS/cm). Results of inverse modeling simulations using PHREEQC show that dissolution of halite may be the main source of Cl and Na in the study area. Ionic delta calculation indicates that the depletion of Na and K and enrichment of Ca and Mg in groundwater were probably attributed to reverse ion exchange reactions. During a sampling campaign conducted in October 2015, 11 groundwater samples were collected for Cl, Br and isotopic analysis (2H/18O). Molar Cl/Br ratios in fresh groundwater were higher than those of seawater, indicating the impact of halite dissolution on the groundwater quality. For saline groundwater, these ratios were less than those of seawater, showing the influence of anthropogenic input from agriculture on the same. Relatively depleted isotopic signature of all groundwater samples show that the monsoon precipitation is the main source of groundwater recharge in the study area. 相似文献
11.
《Applied Geochemistry》2005,20(9):1658-1676
Geochemical and environmental isotope data were used to gain the first regional picture of groundwater recharge, circulation and its hydrochemical evolution in the upper Blue Nile River basin of Ethiopia. Q-mode statistical cluster analysis (HCA) was used to classify water into objective groups and to conduct inverse geochemical modeling among the groups. Two major structurally deformed regions with distinct groundwater circulation and evolution history were identified. These are the Lake Tana Graben (LTG) and the Yerer Tullu Wellel Volcanic Lineament Zone (YTVL). Silicate hydrolysis accompanied by CO2 influx from deeper sources plays a major role in groundwater chemical evolution of the high TDS Na–HCO3 type thermal groundwaters of these two regions. In the basaltic plateau outside these two zones, groundwater recharge takes place rapidly through fractured basalts, groundwater flow paths are short and they are characterized by low TDS and are Ca–Mg–HCO3 type waters. Despite the high altitude (mean altitude ∼2500 masl) and the relatively low mean annual air temperature (18 °C) of the region compared to Sahelian Africa, there is no commensurate depletion in δ18O compositions of groundwaters of the Ethiopian Plateau. Generally the highland areas north and east of the basin are characterized by relatively depleted δ18O groundwaters. Altitudinal depletion of δ18O is 0.1‰/100 m. The meteoric waters of the Blue Nile River basin have higher d-excess compared to the meteoric waters of the Ethiopian Rift and that of its White Nile sister basin which emerges from the equatorial lakes region. The geochemically evolved groundwaters of the YTVL and LTG are relatively isotopically depleted when compared to the present day meteoric waters reflecting recharge under colder climate and their high altitude. 相似文献
12.
A study was conducted by collecting eight seepage water samples that drain through the sedimentary rocks, mainly sandstone and shale, to evaluate the hydrogeochemical characteristics. The collected samples were analyzed for physico-chemical parameters using standard procedures. Three water types were identified in the Piper plot and the hydrogeochemical evolution starts from a Ca–Cl facies (type 1) via mixed Ca–Mg–Cl and Ca–Na–HCO3 facies (type 2) to Na–Cl facies (type 3). Increasing trend of electrical conductivity (EC) values were observed from type 1 water to type 3 water. Lower ionic concentrations with an average EC value of 35.7 µs/cm in Ca–Cl facies indicate the recharge water by monsoonal rainfall, and ion exchange/weathering process is reflected in the mixing zone. Higher ionic concentration with an average EC value of 399 µs/cm is noted in Na–Cl facies, which indicates the ion exchange during water–rock interaction. Higher log pCO2 values are also found in this facies, revealing the longer residence time of seepage water in the rock matrix, which release more ions into the water. The relative mobility of elements during weathering suggest that the order of mobility in both sandstone and shale is Na > Ca > Mg > K. It was observed that the hydrogeochemistry of seepage water is mainly controlled by the bedrock geology. 相似文献
13.
N. Chandrasekar S. Selvakumar Y. Srinivas J. S. John Wilson T. Simon Peter N. S. Magesh 《Environmental Earth Sciences》2014,71(11):4739-4750
Hydrogeochemical investigation of groundwater has been carried out in the coastal aquifers of southern Tamil Nadu, India. Seventy-nine dug well samples were collected and analyzed for various physicochemical parameters. The result of the geochemical analysis indicates the groundwater in the study area is slightly alkaline with moderate saline water. The cation and anion concentrations confirm most of the groundwater samples belong to the order of Na+ > Mg2+ > Ca2+ > K+ and Cl? > SO4 2? > HCO3 ?. Thereby three major hydrochemical facies (Ca–Cl, mixed Ca–Mg–Cl and Na–Cl) were identified. Based on the US Salinity diagram, majority of the samples fall under medium to very high salinity with low to high sodium hazard. The cross plot of Ca2+ + Mg2+ versus chloride shows 61 % of the samples fall under saline water category. Higher EC, TDS and Cl concentrations were observed from Tiruchendur to Koodankulam coastal zone. It indicates that these regions are significantly affected by saltwater contamination due to seawater intrusion, saltpan deposits, and beach placer mining activities. 相似文献
14.
《Applied Geochemistry》2006,21(9):1522-1538
Factors controlling the chemical composition of water interacting with finely-crushed kimberlite have been investigated by sampling pore waters from processed kimberlite fines stored in a containment facility. Discharge water from the diamond recovery plant and surface water from the containment facility, which acts as plant intake water, were also sampled. All waters sampled are pH-neutral, enriched in SO4, Mg, Ca, and K, and low in Fe. Pore-water samples, representing the most concentrated waters, are characterized by the highest SO4 (up to 4080 mg l−1), Mg (up to 870 mg l−1), and Ca (up to 473 mg l−1). The water discharged from the processing plant has higher concentrations of all major dissolved constituents than the intake water. The dominant minerals present in the processed fines and the kimberlite ore are serpentine and olivine, with small amounts of Ca sulphate and Fe sulphide restricted to mud xenoclasts. Reaction and inverse modeling suggest that much of the water-rock interaction takes place within the plant and involves the dissolution of chrysotile and Ca sulphate, and precipitation of silica and Mg carbonate. Evapoconcentration also appears to be a significant process affecting pore water composition in the containment facility. The reaction proposed to be occurring during ore processing involves the dissolution of CO2(g) and may represent an opportunity to sequester atmospheric CO2 through mineral carbonation. 相似文献
15.
The Neoproterozoic (593–532 Ma) Dahongliutan banded iron formation (BIF), located in the Tianshuihai terrane (Western Kunlun orogenic belt), is hosted in the Tianshuihai Group, a dominantly submarine siliciclastic and carbonate sedimentary succession that generally has been metamorphosed to greenschist facies. Iron oxide (hematite), carbonate (siderite, ankerite, dolomite and calcite) and silicate (muscovite) facies are all present within the iron-rich layers. There are three distinctive sedimentary facies BIFs, the oxide, silicate–carbonate–oxide and carbonate (being subdivided into ankerite and siderite facies BIFs) in the Dahongliutan BIF. They demonstrate lateral and vertical zonation from south to north and from bottom to top: the carbonate facies BIF through a majority of the oxide facies BIF into the silicate–carbonate–oxide facies BIF and a small proportion of the oxide facies BIF.The positive correlations between Al2O3 and TiO2, Sc, V, Cr, Rb, Cs, Th and ∑REE (total rare earth element) for various facies of BIFs indicate these chemical sediments incorporate terrigenous detrital components. Low contents of Al2O3 (<3 wt%), TiO2 (<0.15 wt%), ∑REE (5.06–39.6 ppm) and incompatible HFSEs (high field strength elements, e.g., Zr, Hf, Th and Sc) (<10 ppm), and high Fe/Ti ratios (254–4115) for a majority of the oxide and carbonate facies BIFs suggest a small clastic input (<20% clastic materials) admixtured with their original chemical precipitates. The higher abundances of Al2O3 (>3 wt%), TiO2, Zr, Th, Cs, Sc, Cr and ∑REE (31.2–62.9 ppm), and low Fe/Ti ratios (95.2–236) of the silicate–carbonate–oxide facies BIF are consistent with incorporation of higher amounts of clastic components (20%–40% clastic materials). The HREE (heavy rare earth element) enrichment pattern in PAAS-normalized REE diagrams exhibited by a majority of the oxide and carbonate facies BIFs shows a modern seawater REE signature overprinted by high-T (temperature) hydrothermal fluids marked by strong positive Eu anomalies (Eu/Eu1PAAS = 2.37–5.23). The low Eu/Sm ratios, small positive Eu anomaly (Eu/Eu1PAAS = 1.10–1.58) and slightly MREE (middle rare earth element) enrichment relative to HREE in the silicate–carbonate–oxide facies BIF and some oxide and carbonate facies BIFs indicate higher contributions from low-T hydrothermal sources. The absence of negative Ce anomalies and the high Fe3+/(Fe3+/Fe2+) ratios (0.98–1.00) for the oxide and silicate–carbonate–oxide BIFs do not support ocean anoxia. The δ13CV-PDB (−4.0‰ to −6.6‰) and δ18OV-PDB (−14.0‰ to −11.5‰) values for siderite and ankerite in the carbonate facies BIF are, on average, ∼6‰ and ∼5‰ lower than those (δ13CV-PDB = −0.8‰ to + 3.1‰ and δ18OV-PDB = −8.2‰ to −6.3‰) of Ca–Mg carbonates from the silicate–carbonate–oxide facies BIF. This feature, coupled with the negative correlations between FeO, Eu/Eu1PAAS and δ13CV-PDB, imply that a water column stratified with regard to the isotopic omposition of total dissolved CO2, with the deeper water, from which the carbonate facies BIF formed, depleted in δ13C that may have been derive from hydrothermal activity.Integration of petrographic, geochemical, and isotopic data indicates that the silicate–carbonate–oxide facies BIF and part of the oxide facies BIF precipitated in a near-shore, oxic and shallow water environment, whereas a majority of the oxide and carbonate facies BIFs deposited in anoxic but Fe2+-rich deeper waters, closer to submarine hydrothermal vents. High-T hydrothermal solutions, with infusions of some low-T hydrothermal fluids, brought Fe and Si onto a shallow marine, variably mixed with detrital components from seawaters and fresh waters carrying continental landmass and finally led to the alternating deposition of the Dahongliutan BIF during regression–transgression cycles.The Dahongliutan BIF is more akin to Superior-type rather than Algoma-type and Rapitan-type BIF, and constitutes an additional line of evidence for the widespread return of BIFs in the Cryogenian and Ediacaran reflecting the recurrence of anoxic ferruginous deep sea and anoxia/reoxygenation cycles in the Neoproterozoic. In combination with previous studies on other Fe deposits in the Tianshuihai terrane, we propose that a Fe2+-rich anoxic basin or deep sea probably existed from the Neoproterozoic to the Early Cambrian in this area. 相似文献
16.
The Diyadin Geothermal area, located in the eastern part of Anatolia (Turkey) where there has been recent volcanic activity, is favorable for the formation of geothermal systems. Indeed, the Diyadin geothermal system is located in an active geodynamic zone, where strike-slip faults and tensional cracks have developed due to N–S regional compression. The area is characterized by closely spaced thermal and mineralized springs, with temperatures in the range 30–64 °C, and flowrates 0.5–10 L/s. Thermal spring waters are mainly of Ca(Na)-HCO3 and Ca(Mg)-SO4 types, with high salinity, while cold groundwater is mostly of Ca(Na, Mg)-HCO3 type, with lower salinity. High contents of some minor elements in thermal waters, such as F, B, Li, Rb, Sr and Cs probably derive from enhanced water–rock interaction.Thermal water samples collected from Diyadin are far from chemical equilibrium as the waters flow upward from reservoirs towards spring vents and possibly mix with cooler waters. The temperatures of the deep geothermal reservoirs are estimated to be between 92 and 156 °C in Diyadin field, based on quartz geothermometry, while slightly lower estimates are obtained using chalcedony geothermometers. The isotopic composition of thermal water (δ18O, δ2H, δ3H) indicates their deep-circulating meteoric origin. The waters are likely to have originated from the percolation of rainwater along fractures and faults to the deep hot reservoir. Subsequent heating by conduction due to the presence of an intrusive cupola associated with the Tendurek volcano, is followed by the ascent of deep waters to the surface along faults and fractures that act as hydrothermal conduits.Modeling of the geothermal fluids indicates that the fluid is oversaturated with calcite, aragonite and dolomite, which matches travertine precipitation in the discharge area. Likewise, the fluid is oversaturated with respect to quartz, and chalcedony indicating the possibility of siliceous precipitation near the discharge areas. A conceptual hydro-geochemical model of the Diyadin thermal waters based on the isotope and chemical analytical results, has been constructed. 相似文献
17.
Samuel Y. Ganyaglo Shiloh Osae Samuel B. Dampare Joseph R. Fianko Mohammad A. H. Bhuiyan Abass Gibrilla Edward Bam Elikem Ahialey Juliet Osei 《Environmental Earth Sciences》2012,66(2):573-587
Insufficient knowledge of the hydrogeochemistry of aquifers in the Central Region of Ghana has necessitated a preliminary water quality assessment in some parts of the region. Major and minor ions, and trace metal compositions of groundwater have been studied with the aim of evaluating hydrogeochemical processes that are likely to impair the quality of water in the study area. The results show that groundwater in the area is weakly acidic with mean acidity being 5.83 pH units. The dominant cation in the area is Na, followed by K, Ca, and Mg, and the dominant anion is Cl?, followed by HCO3 ? and SO4 2?. Two major hydrochemical facies have been identified as Na–Cl and Na–HCO3, water types. Multivariate statistical techniques such as cluster analysis (CA) and factor analysis/principal component analysis (PCA), in R mode, were employed to examine the chemical compositions of groundwater and to identify factors that influenced each. Q-mode CA analysis resulted in two distinct water types as established by the hydrochemical facies. Cluster 1 waters contain predominantly Na–Cl. Cluster 2 waters contain Na–HCO3 and Na–Cl. Cluster 2 waters are fresher and of good quality than cluster 1. Factor analysis yielded five significant factors, explaining 86.56% of the total variance. PC1 explains 41.95% of the variance and is contributed by temperature, electrical conductivity, TDS, turbidity, SO4 2?, Cl?, Na, K, Ca, Mg, and Mn and influenced by geochemical processes such as weathering, mineral dissolution, cation exchange, and oxidation–reduction reactions. PC2 explains 16.43% of the total variance and is characterized by high positive loadings of pH and HCO3 ?. This results from biogenic activities taking place to generate gaseous carbon dioxide that reacts with infiltrating water to generate HCO3 ?, which intend affect the pH. PC3 explains 11.17% of the total variance and is negatively loaded on PO4 3? and NO3 ? indicating anthropogenic influence. The R-mode PCA, supported by R-mode CA, have revealed hydrogeochemical processes as the major sources of ions in the groundwater. Factor score plot revealed a possible flow direction from the northern sections of the study area, marked by higher topography, to the south. Compositional relations confirmed the predominant geochemical process responsible for the various ions in the groundwater as mineral dissolution and thus agree with the multivariate analysis. 相似文献
18.
K. Srinivasamoorthy C. Nanthakumar M. Vasanthavigar K. Vijayaraghavan R. Rajivgandhi S. Chidambaram P. Anandhan R. Manivannan S. Vasudevan 《Arabian Journal of Geosciences》2011,4(1-2):91-102
A total of 162 groundwater samples for three representative seasons were collected from Salem district of Tamilnadu, India to decipher hydrogeochemistry and groundwater quality for determining its suitability for drinking and agricultural proposes. The water is neutral to alkaline in nature with pH ranging from 6.6 to 8.6 with an average of 8.0. Higher electrical conductivity was observed during post-monsoon season. The abundance of major ions in the groundwater was in the order of $ {\text{Na} > \text{Ca} > \text{Mg} > \text{K} = \text{Cl} > \text{HC}}{{\text{O}}_3}\; > \;{\text{S}}{{\text{O}}_4}\; > \;{\text{N}}{{\text{O}}_3} $ . Piper plot reveals the dominance of geochemical facies as mixed Ca–Mg–Cl, Na–Cl, Ca–HCO3, Ca–Na–HCO3, and Ca–Cl type. NO3, Cl, SO4, and F exceed the permissible limit during summer and post-monsoon seasons. Sodium adsorption ratio was higher during post-monsoon and southwest monsoon season indicating high and low salinity, satisfactory for plants having moderate salt tolerance on soils. Permeability index of water irrespective of season falls in class I and class II indicating water is moderate to good for irrigation purposes. As per the classification of water for irrigation purpose, water is fit for domestic and agricultural purposes with minor exceptions irrespective of seasons. 相似文献
19.
《Applied Geochemistry》2006,21(2):289-304
Mineral springs from Daylesford, Australia discharge at ambient temperatures, have high CO2 contents, and effervesce naturally. Mineral waters have high HCO3 and Na concentrations (up to 4110 and 750 mg/L, respectively) and CO2 concentrations of 620–2520 mg/L. Calcium and Mg concentrations are 61–250 and 44–215 mg/L, respectively, and Si, Sr, Ba, and Li are the most abundant minor and trace elements. The high PCO2 of these waters promotes mineral dissolution, while maintaining low pH values, and geochemical modelling indicates that the CO2-rich mineral water must have interacted with both sediments and basalts. Amorphous silica concentrations and silica geothermometry indicate that these waters are unlikely to have been heated above ambient temperatures and therefore reflect shallow circulation on the order of several hundreds of metres. Variations in minor and trace element composition from closely adjacent spring discharges indicate that groundwater flows within relatively isolated fracture networks. The chemical consistency of individual spring discharges over at least 20 a indicates that flow within these fracture networks has remained isolated over long periods. The mineral water resource is at risk from mixing with potentially contaminated surface water and shallow groundwater in the discharge areas. Increased δ2H values and Cl concentrations, and lower Na concentrations indicate those springs that are most at risk from surface contamination and overpumping. Elevated NO3 concentrations in a few springs indicate that these springs have already been contaminated during discharge. 相似文献
20.
The Vaal River Basin is an economically significant area situated in the interior of South Africa (SA), where mining, industrial, domestic and agricultural activities are very intense. The purpose of the study was to assess the influence of geology and anthropogenic activities on groundwater chemistry, and identify the predominant hydrochemical processes in the basin. Data from seventy groundwater sites were retrieved from the national database, and attention was paid to fifteen water quality parameters. Groundwater samples were clustered into seven hydrochemically distinct groups using Hierarchical Cluster Analysis (HCA), and three samples treated independently. A Piper plot revealed two major water types, Ca–Mg–HCO3 and Ca–Mg–SO4-Cl, which were linked to dissolution of the underlying geology and mine pollution. The Ca?+?Mg vs HCO3?+?SO4 plot indicated that reverse ion exchange is an active process than cation exchange in the area. Principal component analysis (PCA) was used to identify the main natural and anthropogenic processes causing variation in groundwater chemistry. Four principal components were extracted using PCA that explains 82% of the total variance in the chemical parameters. The PCA results can be categorized by four components: (1) evaporites and silicates weathering enrichment of Na, K, Cl, SO4 and F, and anthropogenic Cl; (2) dissolution of dolomite, limestone and gypsum; (3) agricultural fertilizers (4) wastewater treatment. This study reveals that both natural and anthropogenic activities are the cause of groundwater variation in the basin. 相似文献