共查询到20条相似文献，搜索用时 31 毫秒
1.
Reinforced concrete members subjected to cyclic inelastic deformation may exhibit both stiffness and strength degradation, depending on the maximum amplitude and the number of cycles experienced by the member. Many of the currently available models do not simulate the cycle-dependent stiffness loss often observed during the experiments. An analytical model based on a damage parameter which is a function of the cumulative cyclic inelastic deformation is proposed. A small-scale reinforced concrete beam–column joint was constructed and subjected to cyclic loading to calibrate the damage parameter. The model is able to approximate the complete hysteretic response and is simple to implement. The sensitivity of the analytical model was examined by comparing the model with several experimental results. 相似文献
2.
钢管混凝土边框高强混凝土组合剪力墙抗震性能试验研究 总被引：6，自引：1，他引：5
钢管混凝土边框组合剪力墙是一种新型组合剪力墙。本文进行了2个1/4缩尺的高强混凝土剪力墙模型的低周反复荷载试验,模型1为普通钢筋混凝土剪力墙,模型2为钢管混凝土边框组合剪力墙。在试验研究基础上,对比分析它们的承载力、延性、刚度及其衰减过程、滞回特性、耗能能力及破坏特征,建立了组合剪力墙的承载力计算模型,计算结果与实测结果符合较好。研究表明,钢管混凝土边框高强混凝土组合剪力墙与普通剪力墙相比抗震性能显著提高。 相似文献
3.
The cyclic behaviour of reinforced concrete columns has been the subject of many experimental studies in recent years. However, most of these studies have focused on the unidirectional loading of columns with square cross‐sections under constant axial loading conditions. In the present study, four types of full‐scale quadrangular building columns were tested under different types of loading, including uniaxial and biaxial loading conditions. The first two specimens of each column type were independently cyclically tested in the strong and weak directions. Bidirectional tests using different loading paths were performed on the other column specimens. All columns were tested under constant axial loading conditions. In this paper, the experimental results are presented, and the global behaviour of tested columns is discussed, particularly focusing on the stiffness and strength degradation because of the increasing cyclic demand. Finally, the deformation‐based performance limits proposed in Part 3 of Eurocode 8 were calculated and compared with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
This paper describes a series of experimental investigations on seventeen specimens of steel reinforced concrete special shaped(SRCSS) columns under low cyclic reversed loading using parallel crosshead equipment. Nine T-shaped SRC columns, four L-shaped SRC columns and four +-shaped SRC columns were tested to examine the effects of shape steel confi guration, loading angle, axial compressive ratio and shear-span ratio on the behavior(strength, stiffness, energy dissipation, ductility, etc.) of SRCSS column specimens. The failure modes and hysteretic performance of all the specimens were obtained in the tests. Test results demonstrate that the shear-span ratio is the main parameter affecting the failure modes of SRCSS columns. The specimens with small shear-span ratio are prone to shear failure, and the primary failure planes in SRCSS columns are parallel to the loading direction. As a result, there is a symmetry between positive and negative loading directions in the hysteretic curves of the SRCSS columns. The majority of displacement ductility coeffi cients for all the specimens are over 3.0, so that the SRCSS columns demonstrate a better deformation capacity. In addition, the equivalent viscous damping coeffi cients of all the specimens are greater than 0.2, indicating that the seismic behavior of SRCSS columns is adequate. Finally, the superposition theory was used to calculate the limits of axial compressive ratio for the specimens, and it is found that the test axial compressive ratio is close to or smaller than the calculated axial compressive ratio limit. 相似文献
5.
通过5个高延性混凝土(HDC)加固震损混凝土短柱偏心受压性能试验,研究了HDC对加固震损混凝土短柱的偏压承载能力和变形能力的影响程度.试验结果表明,采用HDC加固震损偏心混凝土短柱,可有效改善小偏心受压构件的脆性破坏,且受压承载能力有明显提高,峰值荷载提高了49％～63％,与峰值荷载对应地位移增大了34％～39％,极限... 相似文献
6.
7.
Past experimental studies have shown that existing precast segmental concrete bridge columns possess unsatisfactory hysteretic energy dissipation capacity, which is an undesirable feature for applications in seismic regions. In this research, we propose new methods of precast segment construction for tall concrete bridge columns to enhance the columns' hysteretic energy dissipation capacity and lateral strength. This is accomplished by adding bonded mild steel reinforcing bars across the segment joints, strengthening the joint at the base of the column and increasing the height of the base segment (hinge segment). Four large‐scale column specimens were fabricated and tested with lateral cyclic loading in the laboratory. Each specimen consisted of a foundation and 9 or 10 precast column segments. Test results of specimens with the proposed design concepts showed ductile behavior and satisfactory hysteretic energy dissipation capacity. In addition to the experimental study, an analytical study using the finite element method was conducted to understand the bond conditions, strain contours and deformation patterns of the specimens tested. Good agreement was found between the experimental observations and the results of the calibrated analytical study. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
8.
Seismic energy dissipation under variable amplitude loading for rectangular RC members in flexure 
下载免费PDF全文
下载免费PDF全文 《地震工程与结构动力学》2018,47(4):831-853
The energy dissipation characteristics of reinforced concrete members that exhibit both strength and stiffness deterioration under imposed displacement reversals were investigated. To do this, 24 symmetrically reinforced concrete rectangular specimens were tested under stable variable and random variable amplitude inelastic displacement cycles. Stable variable amplitude tests were employed to determine the low‐cycle fatigue behavior of specimens where the loading sequence was the major variable. A 2‐parameter fatigue model was developed in order to express the variation of the dissipated energy in displacement cycles with the cumulative hysteretic energy. This model was then used to predict the energy dissipation of test specimens subjected to random variable amplitude displacement cycles simulating severe seismic excitations. It has been demonstrated that the remaining energy dissipation capacity for the next displacement cycle was dependent on the relative relationship between the maximal displacement cycle and the energy dissipated along the completed displacement path. The plastic energy dissipation capacity of reinforced concrete members is both displacement path dependent and cumulative hysteretic energy dependent. 相似文献
9.
H. U?ur Koyliioglu Ahmet ?. Çakmak Søren R.K. Nielsen 《Soil Dynamics and Earthquake Engineering》1997,16(2):95-112
A nonlinear hysteretic model for the response and local damage analyses of reinforced concrete shear frames subject to earthquake excitation is proposed, and, the model is applied to analyse midbroken reinforced concrete (RC) structures due to earthquake loads. Each storey of the shear frame is represented by a Clough and Johnston hysteretic oscillator with degrading elastic fraction of the restoring force. The local damage is numerically quantified in the domain [0,1] using the maximum softening damage indicators which are defined in closed form based on the variation of the eigenfrequency of the local oscillators due to the local stiffness and strength deterioration. The proposed method of response and damage analyses is illustrated using a sample 5 storey shear frame with a weak third storey in stiffness and/or strength subject to sinusoidal and simulated earthquake excitations for which the horizontal component of the ground motion is modeled as a stationary Gaussian stochastic process with Kanai-Tajimi spectrum, multiplied by an envelope function. 相似文献
10.
Kamyar Karbasi Arani Mohammad S. Marefat Marco Di Ludovico Andrea Prota Gaetano Manfredi 《Bulletin of Earthquake Engineering》2013,11(6):2033-2053
The application of smooth (plain) bars in reinforced concrete (RC) construction has been abandoned since the 1970s; however, there are many old reinforced concrete buildings in the world whose construction is based on this old style that are now in need of structural seismic rehabilitation according to the requirements of present day seismic rehabilitation codes. The focus of this study concerns the investigation of the hysteretic cyclic response of RC columns with smooth bars. The results of six column specimens having a variety of details for overlapping splices of longitudinal bars while experiencing two different levels of axial loads under cyclic loading reversals are presented. Through analysis of test observations and the obtained experimental results, it is attempted to clarify major aspects of hysteretic response for RC columns with smooth bars, from a seismic assessment point of view. The hysteretic force–drift responses of columns are deeply investigated and a new concept explaining the flag shape form of the hysteretic response is presented. Furthermore, the rocking response of columns is predicted with a new formulation that assumes an internal compression strut inside the column body as a consequence of rocking that originated from high base rotations. Finally, a simple hysteresis rule is proposed which is the result of considering the combination of two springs in parallel to provide the total hysteretic response as the summation of rocking hysteretic and bottom anchor (smooth bar) hysteretic responses. 相似文献
11.
为了进一步探讨复杂加载路径下钢筋混凝土L形柱的受力性能,采用基于有限单元柔度法纤维模型梁柱单元,对忽略剪切和扭转影响的钢筋混凝土L形柱在不同加载路径下的抗震性能进行了计算机模拟分析,研究了不同加载路径对钢筋混凝土L形柱承载力、延性、累积滞回耗能等的影响。结果表明,现有钢筋混凝土L形柱抗震性能评定方法应作适当调整,以考虑加载路径对评定结果的影响。 相似文献
12.
This paper presents general composed analytical models to predict the behavior of reinforced concrete (RC) bridge columns. The analytical models were developed in OpenSees to represent the common hysteretic behavior of RC bridge columns. The proposed composed models can accommodate flexure failure, flexure‐shear failure, and pure shear failure, which are observed in existing RC bridge piers. The accuracy of the models was verified using data from the static cyclic‐loading experiments of 16 single columns and one multi‐column bent and dynamical experiment from two pseudo‐dynamic tests. The results showed that the analytical models could simulate the nonlinear behavior until the post‐failure behavior, including the strength degradation, the buckling of the reinforcement, and the pinching effect. Therefore, a global view of the behavior of reinforcement concrete is prescribed as simply as possible from the academic perspective, and these models are expected to provide sufficient accuracy when applied in engineering practice. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
13.
高轴压比下钢管混凝土边框组合剪力墙抗震性能试验研究 总被引：8，自引：1，他引：7
钢管混凝土边框组合剪力墙是一种适用于高层及超高层建筑的新型组合剪力墙。轴压比是影响剪力墙抗震性能的一个主要因素,高层建筑底部轴压比较大。本文进行了1/4缩尺的1个普通钢筋混凝土剪力墙模型和1个钢管混凝土边框组合剪力墙模型在高轴压比下的低周反复荷载试验。在试验研究基础上,对比分析了剪力墙的承载力、延性、刚度及其衰减过程、滞回特性、耗能能力及破坏特征,建立了钢管混凝土边框组合剪力墙的承载力计算模型,计算结果与实测结果符合较好。研究表明:在高轴压比下钢管混凝土边框组合剪力墙与普通剪力墙相比抗震性能显著提高。 相似文献
14.
通过2根圆钢管普通混凝土柱与5根圆钢管钢渣混凝土柱在高轴压比下的水平低周反复加载试验,研究圆钢管钢渣混凝土柱的轴压比、钢管壁厚、钢渣砂替代率和长细比对其破坏形态、滞回耗能能力、骨架曲线、延性及耗能、刚度退化的影响规律。研究结果表明:钢渣混凝土试件破坏过程和破坏形态与普通混凝土试件基本相同,主要表现为钢管底部鼓曲的压弯破坏;所有试件滞回曲线饱满,无明显“捏缩”现象;高轴压比试件存在明显承载力突降现象,合理的径厚比（钢管直径/钢管壁厚）对高轴压比试件承载力突降有明显改善作用;低轴压比试件延性系数大于4.0,高轴压比试件延性系数介于1.57～3.76之间,轴压比增大,试件延性下降;试件破坏时等效粘滞阻尼系数ξeq介于0.259～0.437之间;建议采用《钢管混凝土混合结构技术标准》（GB/T51446－2021）或《钢管混凝土结构技术规程》（DBJ/T13－51－2010）计算地震作用下钢管钢渣混凝土柱压弯承载力,但高轴压比钢管钢渣混凝土柱计算结果需乘以折减系数0.8。 相似文献
15.
再生混凝土框架抗震性能试验研究 总被引：1，自引：0，他引：1
通过2榀再生骨料掺量分别为25%、50%的再生混凝土框架和1榀普通对比混凝土框架的低周反复加载试验,研究了再生混凝土框架的受力全过程、开裂荷载和极限承载力、破坏形态,分析了再生混凝土框架的滞回曲线、骨架曲线、变形性能、耗能能力等抗震性能,并和普通混凝土框架进行了对比分析。研究结果表明,随着再生骨料掺量的增加,再生混凝土框架的极限承载力、变形能力、耗能能力等抗震性能没有明显降低,再生混凝土框架具有较好的抗震性能,再生混凝土框架应用于实际工程是可行的。文中研究成果可为再生混凝土框架结构的工程应用提供依据。 相似文献
16.
为研究巨型SRC柱抗震性能的数值模拟方法,本文基于有限元分析软件OpenSees,采用纤维单元模拟5根具有不同复杂截面型钢形式的巨型SRC柱试件的低周反复加载试验,并与试验滞回曲线以及骨架曲线进行对比分析。结果表明,该基于纤维单元的有限元模型能够较好模拟巨型SRC柱试件的滞回反应,具有一定的合理性和可靠性。同时采用一种新型高性能分层壳单元对其中一根巨型SRC柱试件进行精细有限元建模分析,分析结果与试验结果对比表明分层壳能够较好地模拟试件的初始刚度和峰值承载力;与纤维单元模拟结果对比表明纤维单元能够更好地模拟试件承载力的下降,结果更加精确,且计算效率更高;新型高性能壳单元DKGQ能够弥补原有壳单元的不足,更好地模拟构件因混凝土大量开裂剥落导致的承载力下降。 相似文献
17.
The effect of stiffness degradation in reinforced concrete structural members on the inelastic response of multistorey buildings to earthquakes is investigated. In particular, the following question is examined. How do the ductility requirements for multistorey systems with degrading stiffness behaviour compare with those for structures with ordinary bilinear hysteretic property? Inelastic dynamic responses of two idealized multistorey buildings, one having a long and the other a relatively short fundamental period, to an ensemble of twenty simulated earthquakes representative of moderately intense ground motions in California at moderate epicentral distances on firm ground, are analysed for ordinary bilinear hysteretic behaviour and for bilinear hysteretic behaviour with stiffness degradation property. The conclusions deduced from the results of this investigation include the following (1) It is, in general, not possible to predict the maximum response of a degrading stiffness system from results for the corresponding ordinary bilinear system (2) The differences in ductility requirements due to stiffness degradation are generally smaller than those associated with probabilistic variability from one ground motion to another (3) Stiffness degradation has little influence on the ductility requirements for flexible buildings, but it leads to increased ductility requirements for stiff buildings. 相似文献
18.
提出了连排钢管混凝土柱带钢板耗能键组合剪力墙,它由钢管混凝土连排柱、柱间钢板耗能键、钢板耗能键外包混凝土条带三种单元组合而成。进行了4个不同设计参数试件的低周反复荷载试验研究。分析了各试件的承载力、刚度及其退化过程、滞回特性、延性和破坏特征,探讨了分灾耗能机制。研究表明:连排钢管混凝土柱带钢板耗能键组合剪力墙,承载力较大,后期刚度较稳定;混凝土条带在开裂与闭合过程中消耗地震能量,钢板耗能键通过弯剪变形消耗地震能量,钢管与混凝土条带共同工作协同耗能,具有良好的抗震耗能机制;这种新型组合剪力墙具有较强综合抗震耗能能力。 相似文献
19.
高强混凝土框架柱的地震损伤模型 总被引：3，自引：1，他引：2
本文首先讨论了现有的几种地震损伤模型及其特点,然后计算出试验框架柱累积滞回耗能随加载循环水平的变化,分析和讨论了轴压比、箍筋形式、配箍率、纵向配筋率、混凝土强度等级以及剪跨比对累积滞回耗能的影响。根据现有的损伤模型,对试验框架柱的损伤指数进行了分析比较,给出了符合高强混凝土框架柱和普通混凝土框架柱的地震损伤模型。根据损伤指数随加载循环水平的变化规律,分析和讨论了剪跨比、轴压比以及配箍率对损伤的影响。最后通过对各地震损伤模型的比较分析,提出了高强混凝土框架柱的地震损伤模型。 相似文献
20.
Norio Hori Norio Inoue Dangol Purushotam Tetsuya Nishida Jun Kobayashi 《地震工程与结构动力学》2006,35(13):1699-1719
To improve the seismic performance of masonry structures, confined masonry that improves the seismic resistance of masonry structures by the confining effect of surrounding bond beams and tie columns is constructed. This study investigated the earthquake resisting behaviour of confined masonry structures that are being studied and constructed in China. The structural system consists of unreinforced block masonry walls with surrounding reinforced concrete bond beams and tie columns. The characteristics of the structure include: (1) damage to blocks is reduced and brittle failure is avoided by the comparatively lower strength of the joint mortar than that of the blocks, (2) the masonry walls and surrounding reinforced concrete bond beams and tie columns are securely jointed by the shear keys of the tie columns. In this study, wall specimens made of concrete blocks were tested under a cyclic lateral load and simulated by a rigid body spring model that models non‐linear behaviour by rigid bodies and boundary springs. The results of studies outline the resisting mechanism, indicating that a rigid body spring model is considered appropriate for analysing this type of structure. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献