共查询到20条相似文献，搜索用时 953 毫秒
1.
Emil Blias 《Geophysical Prospecting》2012,60(6):1054-1067
This paper presents a new explicit method for the estimation of layered vertical transverse isotropic (VTI) anisotropic parameters from walkaway VSP data. This method is based on Dix‐type normal moveout (NMO) inversion. To estimate interval anisotropic parameters above a receiver array, the method uses time arrivals of surface‐related double‐reflected downgoing waves. A three‐term NMO approximation function is used to estimate NMO velocity and a non‐hyperbolic parameter. Assuming the vertical velocity is known from zero‐offset VSP data, Dix‐type inversion is applied to estimate the layered Thomsen anisotropic parameters ?, δ above the receivers array. Model results show reasonable accuracy for estimates through Dix‐type inversion. Results also show that in many cases we can neglect the influence of the velocity gradient on anisotropy estimates. First breaks are used to estimate anisotropic parameters within the walkaway receiver interval. Analytical uncertainty analysis is performed to NMO parameter estimates. Its conclusions are confirmed by modelling. 相似文献
2.
在地震勘探中,描述复杂介质的正演和反演问题通常包含许多反映介质不同特性的参数.同时获得这些参数对进行更准确的岩性描述和油藏预测具有重要的理论和现实意义.为了提高频率域黏弹性波动方程的零偏VSP多参数反演的精度,本文对多参数反演的可行性进行分析,明确了目标函数的敏感程度及参数之间的耦合情况,提出了一种基于走时约束的分频分步多参数反演策略.首先利用零偏VSP资料构建先验信息,然后分别利用高、低频数据进行两步反演,也就是"三个参数反演+五个参数反演"的过程,以提高反演的稳健性和精度.利用此方法可同时得到零偏VSP数据可靠的弹性波速度、密度和品质因子,为精确的时-深关系及含油气的解释和预测奠定基础,同时也可以为地面地震叠前反演提供可靠有效的约束,增强地面地震反演精度. 相似文献
3.
Emil Blias 《Geophysical Prospecting》2013,61(3):574-581
I introduce a new explicit form of vertical seismic profile (VSP) traveltime approximation for a 2D model with non‐horizontal boundaries and anisotropic layers. The goal of the new approximation is to dramatically decrease the cost of time calculations by reducing the number of calculated rays in a complex multi‐layered anisotropic model for VSP walkaway data with many sources. This traveltime approximation extends the generalized moveout approximation proposed by Fomel and Stovas. The new equation is designed for borehole seismic geometry where the receivers are placed in a well while the sources are on the surface. For this, the time‐offset function is presented as a sum of odd and even functions. Coefficients in this approximation are determined by calculating the traveltime and its first‐ and second‐order derivatives at five specific rays. Once these coefficients are determined, the traveltimes at other rays are calculated by this approximation. Testing this new approximation on a 2D anisotropic model with dipping boundaries shows its very high accuracy for offsets three times the reflector depths. The new approximation can be used for 2D anisotropic models with tilted symmetry axes for practical VSP geometry calculations. The new explicit approximation eliminates the need of massive ray tracing in a complicated velocity model for multi‐source VSP surveys. This method is designed not for NMO correction but for replacing conventional ray tracing for time calculations. 相似文献
4.
We have developed a straightforward and ray based methodology to estimate both the maximum offset and reflection imaging radius for multi‐layered velocity models, which can be used for a 2D/3D VSP survey design. Through numerical examples, we demonstrate that the presence of a high‐velocity layer above a target zone significantly reduces the maximum offset and reflection imaging radius. Our numerical examples also show that including in a migration VSP data acquired beyond a recommended maximum offset, radically degrades the quality of the final VSP image. In addition, unlike the conventional straight‐line based approximation that often produces an incorrect large reflection imaging radius, our methodology predicts the VSP imaging radius with more accuracy than does the conventional approximation. 相似文献
5.
Anisotropic elastic full‐waveform inversion of walkaway vertical seismic profiling data from the Arabian Gulf 
下载免费PDF全文
下载免费PDF全文 John C Owusu Marwan Charara Scott Leaney Allan Campbell Shujaat Ali Igor Borodin Les Nutt Henry Menkiti 《Geophysical Prospecting》2016,64(1):38-53
Borehole seismic addresses the need for high‐resolution images and elastic parameters of the subsurface. Full‐waveform inversion of vertical seismic profile data is a promising technology with the potential to recover quantitative information about elastic properties of the medium. Full‐waveform inversion has the capability to process the entire wavefield and to address the wave propagation effects contained in the borehole data—multi‐component measurements; anisotropic effects; compressional and shear waves; and transmitted, converted, and reflected waves and multiples. Full‐waveform inversion, therefore, has the potential to provide a more accurate result compared with conventional processing methods. We present a feasibility study with results of the application of high‐frequency (up to 60 Hz) anisotropic elastic full‐waveform inversion to a walkaway vertical seismic profile data from the Arabian Gulf. Full‐waveform inversion has reproduced the majority of the wave events and recovered a geologically plausible layered model with physically meaningful values of the medium. 相似文献
6.
We develop the true‐amplitude prestack migration of multicomponent data based on the use of elastic Gaussian beams for walkaway vertical seismic profile (VSP) acquisition systems. It consists in a weighted summation of multishot data with specific weights, computed by tracing elastic Gaussian beams from each imaging point of the target area towards the sources and receivers. Each pair of beams may be connected with either a pair of P‐rays (PP‐image) or the P‐ray towards sources and the S‐ray to receivers (PS‐image) and is uniquely determined by dip (the angle of the bisector between the rays and the vertical direction) and opening (the angle between the rays) angles. Shooting from the bottom towards the acquisition system helps to avoid well‐known troubles, in particular multipathing for the imaging conditions in complex velocity models. The ability to fix the dip angle and implement summation over opening angles leads to the so‐called selective images that contain mostly interfaces with desired slopes. On the other hand, a set of images computed for a range of opening angles by summation over all available dip angles is used as input of an AVO‐like inversion procedure for the recovery of elastic parameters. The feasibility of this imaging procedure is verified by synthetic data for 2D realistic elastic models. 相似文献
7.
Anisotropic variations in attenuation are of interest since they can give information on the fracture system and may be more amenable to measurement than absolute attenuation values. We examine methods for detecting changes in relative attenuation with azimuth from VSP data, and validate the techniques on synthetic data. Analysis of a multi‐azimuth walkaway VSP data set from a fractured hydrocarbon reservoir indicates that such azimuthal variations in P‐wave attenuation are observable. The effects are localized in the reservoir, and analysis allows the prediction of a fracture strike direction, which agrees with geological information. The observed effects can be modelled under reasonable assumptions, which suggests the validity of the link between the anisotropic attenuation and the fracturing. 相似文献
8.
Fluid flow in many hydrocarbon reservoirs is controlled by aligned fractures which make the medium anisotropic on the scale of seismic wavelength. Applying the linear‐slip theory, we investigate seismic signatures of the effective medium produced by a single set of ‘general’ vertical fractures embedded in a purely isotropic host rock. The generality of our fracture model means the allowance for coupling between the normal (to the fracture plane) stress and the tangential jump in displacement (and vice versa). Despite its low (triclinic) symmetry, the medium is described by just nine independent effective parameters and possesses several distinct features which help to identify the physical model and estimate the fracture compliances and background velocities. For example, the polarization vector of the vertically propagating fast shear wave S1 and the semi‐major axis of the S1‐wave normal‐moveout (NMO) ellipse from a horizontal reflector always point in the direction of the fracture strike. Moreover, for the S1‐wave both the vertical velocity and the NMO velocity along the fractures are equal to the shear‐wave velocity in the host rock. Analysis of seismic signatures in the limit of small fracture weaknesses allows us to select the input data needed for unambiguous fracture characterization. The fracture and background parameters can be estimated using the NMO ellipses from horizontal reflectors and vertical velocities of P‐waves and two split S‐waves, combined with a portion of the P‐wave slowness surface reconstructed from multi‐azimuth walkaway vertical seismic profiling (VSP) data. The stability of the parameter‐estimation procedure is verified by performing non‐linear inversion based on the exact equations. 相似文献
9.
Elastic full waveform inversion of seismic reflection data represents a data‐driven form of analysis leading to quantification of sub‐surface parameters in depth. In previous studies attention has been given to P‐wave data recorded in the marine environment, using either acoustic or elastic inversion schemes. In this paper we exploit both P‐waves and mode‐converted S‐waves in the marine environment in the inversion for both P‐ and S‐wave velocities by using wide‐angle, multi‐component, ocean‐bottom cable seismic data. An elastic waveform inversion scheme operating in the time domain was used, allowing accurate modelling of the full wavefield, including the elastic amplitude variation with offset response of reflected arrivals and mode‐converted events. A series of one‐ and two‐dimensional synthetic examples are presented, demonstrating the ability to invert for and thereby to quantify both P‐ and S‐wave velocities for different velocity models. In particular, for more realistic low velocity models, including a typically soft seabed, an effective strategy for inversion is proposed to exploit both P‐ and mode‐converted PS‐waves. Whilst P‐wave events are exploited for inversion for P‐wave velocity, examples show the contribution of both P‐ and PS‐waves to the successful recovery of S‐wave velocity. 相似文献
10.
Fredy A.V. Artola Ricardo Leiderman Sergio A.B. Fontoura 《Geophysical Prospecting》2005,53(5):717-721
The existence of non‐zero reflectivity for zero‐offset PS waves in horizontally layered media is discussed. Field measurements have suggested the occurrence of this phenomenon. We show that, in some cases, if anisotropy is considered in the problem, this reflectivity can be predicted. By using an approximated formulation to determine the coefficient of reflection in arbitrarily anisotropic media, it is clear that, for some elastic arrangements of the subsurface, reflected energy is associated with the converted wave resulting from normal P‐wave incidence. 相似文献
11.
12.
Ho Seuk Bae Changsoo Shin Young Ho Cha Yunseok Choi Dong‐Joo Min 《Geophysical Prospecting》2010,58(6):997-1010
Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models. 相似文献
13.
14.
非零偏VSP地震资料是一种多分量资料,处理非零偏VSP资料,弹性波叠前逆时深度偏移技术无疑是最适合的处理技术.本文从二维各向同性介质的弹性波波动方程出发,研究了对非零偏VSP资料进行叠前逆时深度偏移的偏移算法,讨论了逆时传播过程中的边值问题和数值频散问题及其相应的解决方案;采用求解程函方程计算得到地下各点的地震波初至时间作为成像时间,实现了非零偏VSP资料的叠前逆时深度偏移.最后进行了模型试算和非零偏VSP地震资料的试处理,结果表明该方法不受地层倾角限制,较适用于高陡构造地区或介质横向速度变化较大地区的非零偏VSP地震资料处理. 相似文献
15.
Leonardo Azevedo Rúben Nunes Amílcar Soares Guenther Schwedersky Neto Teresa S. Martins 《Geophysical Prospecting》2018,66(Z1):116-131
Seismic inversion plays an important role in reservoir modelling and characterisation due to its potential for assessing the spatial distribution of the sub‐surface petro‐elastic properties. Seismic amplitude‐versus‐angle inversion methodologies allow to retrieve P‐wave and S‐wave velocities and density individually allowing a better characterisation of existing litho‐fluid facies. We present an iterative geostatistical seismic amplitude‐versus‐angle inversion algorithm that inverts pre‐stack seismic data, sorted by angle gather, directly for: density; P‐wave; and S‐wave velocity models. The proposed iterative geostatistical inverse procedure is based on the use of stochastic sequential simulation and co‐simulation algorithms as the perturbation technique of the model parametre space; and the use of a genetic algorithm as a global optimiser to make the simulated elastic models converge from iteration to iteration. All the elastic models simulated during the iterative procedure honour the marginal prior distributions of P‐wave velocity, S‐wave velocity and density estimated from the available well‐log data, and the corresponding joint distributions between density versus P‐wave velocity and P‐wave versus S‐wave velocity. We successfully tested and implemented the proposed inversion procedure on a pre‐stack synthetic dataset, built from a real reservoir, and on a real pre‐stack seismic dataset acquired over a deep‐water gas reservoir. In both cases the results show a good convergence between real and synthetic seismic and reliable high‐resolution elastic sub‐surface Earth models. 相似文献
16.
南黄海海相地层的地震波场特征和层位标定一直是困扰地震勘探的重要问题.为了近距离、高精度和高分辨率地观测井周围构造特征和岩石性质引起的波场变化,为地震资料的采集、处理与解释提供地震波衰减规律、速度与层位标定等信息,对大陆架科学钻探CSDP-2井实施了近零偏移距垂直地震剖面（VSP）观测.针对海相地层顶部强反射界面地震波穿透难的问题,采用了大容量气枪震源并设计了气枪阵列组合方式,提高了激发地震波的能量,获得了强反射界面之下清晰的PP、PS下行波和上行波信号.采用了三分量偏振合成、组合滤波和波场分离等处理方法,对VSP观测数据进行处理,获得了海相三叠系—志留系的精细的纵波、横波速度结构和地层吸收因子等物性数据,建立了钻井地层、测井、VSP上行波和多道地震剖面对应关系,实现了不同尺度的地质和地球物理属性资料的有效衔接,标定了钻井地质剖面上各深度地质体的地震反射特性,厘定了过井地震剖面上反射同相轴的地质属性.此次观测取得的纵波、横波速度信息,成为建立南黄海海相地层速度模型主要的资料来源,也是地震资料的岩性反演处理不可缺少的信息. 相似文献
17.
The main objective of this work is to establish the applicability of shallow surface‐seismic traveltime tomography in basalt‐covered areas. A densely sampled ～1300‐m long surface seismic profile, acquired as part of the SeiFaBa project in 2003 ( Japsen et al. 2006 ) at Glyvursnes in the Faroe Islands, served as the basis to evaluate the performance of the tomographic method in basalt‐covered areas. The profile is centred at a ～700‐m deep well. VP, VS and density logs, a zero‐offset VSP, downhole‐geophone recordings and geological mapping in the area provided good means of control. The inversion was performed with facilities of the Wide Angle Reflection/Refraction Profiling program package ( Ditmar et al. 1999 ). We tested many inversion sequences while varying the inversion parameters. Modelled traveltimes were verified by full‐waveform modelling. Typically an inversion sequence consists in several iterations that proceed until a satisfactory solution is reached. However, in the present case with high velocity contrasts in the subsurface we obtained the best result with two iterations: first obtaining a smooth starting model with small traveltime residuals by inverting with a high smoothing constraint and then inverting with the lowest possible smoothing constraint to allow the inversion to have the full benefit of the traveltime residuals. The tomogram gives usable velocity information for the near‐surface geology in the area but fails to reproduce the expected velocity distribution of the layered basalt flows. Based on the analysis of the tomogram and geological mapping in the area, a model was defined that correctly models first arrivals from both surface seismic data and downhole‐geophone data. 相似文献
18.
A major complication caused by anisotropy in velocity analysis and imaging is the uncertainty in estimating the vertical velocity and depth scale of the model from surface data. For laterally homogeneous VTI (transversely isotropic with a vertical symmetry axis) media above the target reflector, P‐wave moveout has to be combined with other information (e.g. borehole data or converted waves) to build velocity models for depth imaging. The presence of lateral heterogeneity in the overburden creates the dependence of P‐wave reflection data on all three relevant parameters (the vertical velocity VP0 and the Thomsen coefficients ε and δ) and, therefore, may help to determine the depth scale of the velocity field. Here, we propose a tomographic algorithm designed to invert NMO ellipses (obtained from azimuthally varying stacking velocities) and zero‐offset traveltimes of P‐waves for the parameters of homogeneous VTI layers separated by either plane dipping or curved interfaces. For plane non‐intersecting layer boundaries, the interval parameters cannot be recovered from P‐wave moveout in a unique way. Nonetheless, if the reflectors have sufficiently different azimuths, a priori knowledge of any single interval parameter makes it possible to reconstruct the whole model in depth. For example, the parameter estimation becomes unique if the subsurface layer is known to be isotropic. In the case of 2D inversion on the dip line of co‐orientated reflectors, it is necessary to specify one parameter (e.g. the vertical velocity) per layer. Despite the higher complexity of models with curved interfaces, the increased angle coverage of reflected rays helps to resolve the trade‐offs between the medium parameters. Singular value decomposition (SVD) shows that in the presence of sufficient interface curvature all parameters needed for anisotropic depth processing can be obtained solely from conventional‐spread P‐wave moveout. By performing tests on noise‐contaminated data we demonstrate that the tomographic inversion procedure reconstructs both the interfaces and the VTI parameters with high accuracy. Both SVD analysis and moveout inversion are implemented using an efficient modelling technique based on the theory of NMO‐velocity surfaces generalized for wave propagation through curved interfaces. 相似文献
19.
Sensitivity of time-lapse seismic to reservoir stress path 总被引：1，自引：1，他引：1
Colin M. Sayers 《Geophysical Prospecting》2006,54(3):369-380
The change in reservoir pore pressure due to the production of hydrocarbons leads to anisotropic changes in the stress field acting on the reservoir. Reservoir stress path is defined as the ratio of the change in effective horizontal stress to the change in effective vertical stress from the initial reservoir conditions, and strongly influences the depletion‐induced compaction behaviour of the reservoir. Seismic velocities in sandstones vary with stress due to the presence of stress‐sensitive regions within the rock, such as grain boundaries, microcracks, fractures, etc. Since the response of any microcracks and grain boundaries to a change in stress depends on their orientation relative to the principal stress axes, elastic‐wave velocities are sensitive to reservoir stress path. The vertical P‐ and S‐wave velocities, the small‐offset P‐ and SV‐wave normal‐moveout (NMO) velocities, and the P‐wave amplitude‐versus‐offset (AVO) are sensitive to different combinations of vertical and horizontal stress. The relationships between these quantities and the change in stress can be calibrated using a repeat seismic, sonic log, checkshot or vertical seismic profile (VSP) at the location of a well at which the change in reservoir pressure has been measured. Alternatively, the variation of velocity with azimuth and distance from the borehole, obtained by dipole radial profiling, can be used. Having calibrated these relationships, the theory allows the reservoir stress path to be monitored using time‐lapse seismic by combining changes in the vertical P‐wave impedance, changes in the P‐wave NMO and AVO behaviour, and changes in the S‐wave impedance. 相似文献
20.
描述地震波衰减特征的品质因子Q对地震数据处理和油藏描述非常重要,在地震勘探领域,Q值一般通过垂直地震剖面(VSP)数据或地面地震数据得到.由于叠前地面地震数据具有复杂的射线路径且存在噪声、调谐干涉效应等影响,从叠前地震数据中准确估计Q值相对困难.本文以地震波射线传播为基础,根据同相轴局部斜率和射线参数的映射关系,将多射线波形频谱同时带入谱比法联合反演估计Q值,提出了基于多射线联合反演的速度无关叠前Q值估计方法.该方法通过局部斜率属性避开了速度对Q值估计的影响,局部斜率携带地震波传播的速度信息,具有相同局部斜率的地震反射波具有相同的传播射线参数.同相轴局部斜率是地震数据域的属性,而速度是模型域的参数,在估计Q值中采用数据域的属性参数可以直接应用于数据的联合反演,而不需要通过速度对其做进一步的转化,从而提高了Q值估计的精度.同时,本方法采用预测映射(predictive mapping)技术将非零炮检距反射信息映射到零炮检距处,从而获得零偏移距走时对应的Q值.模拟和实际算例验证了本文方法的有效性. 相似文献