共查询到20条相似文献，搜索用时 46 毫秒
1.
为克服巨大的城市环境干扰,采集高质量的人工地震勘探数据,将大吨位震源车引入到西安地裂缝人工地震勘探中,并在真实城市道路环境下对已知地裂缝进行多项试验,包括抗干扰效果、勘探深度、震源工作参数、垂直叠加次数、不同主频检波器接收、勘探排列长度、最佳反射波接收窗口等,最后将人工地震勘探结果与钻探结果进行验证对比。结果表明,大吨位震源车在实际道路干扰环境下可以得到理想的地震反射剖面,剖面中地裂缝异常明显,推测解释的地裂缝在地面的位置可信。 相似文献
2.
Various exact methods of inverting the complete waveform of vertical seismic reflection data to produce acoustic impedance profiles have been suggested. These inverse methods generally remain valid for nonvertical, plane-wave data, provided total reflection does not occur. Thus, in principle, the “seismogram” at each ray parameter in a slant stack can be interpreted separately. Rather than invert each plane-wave seismogram separately, they can all be interpreted simultaneously and an “average” model thus obtained. Inversion for both the velocity and the density also becomes possible when two or more plane-wave seismograms are simultaneously inverted. The theory for a noniterative inversion method, based on the time-domain Riccati equation, is discussed. Numerical examples of inversions using this technique on synthetic data demonstrate its numerical stability and the advantage of simultaneous inversion of several seismograms to reduce the effect of noise in the data and increase the stability of the inversion process. 相似文献
3.
4.
地震干涉是近几年勘探地球物理领域研究的一个热点方向,它是波场重构的有力工具.然而,地震干涉往往引入虚假同相轴,影响波场重构的质量.为进一步分析虚假同相轴产生的原因并改善波场重构的质量,本文基于稳相分析,详细探讨子波主频、激发炮数、检波器埋深、检波器间距和地层倾角五个因素对波场重构的影响.模型结果表明,震检排列方式和地层倾角等因素通过改变有限震检范围内稳相点的位置来影响波场重构的质量.将垂直地震剖面VSP中的下行直达波与下行反射波进行地震干涉处理,可有效重构来自高陡反射面的下行反射波,将传统的VSP转化为单井地震剖面SWP.直接利用重构SWP波场进行成像,不仅扩大传统VSP的成像范围,而且避免常规勘探面临的静校正和近地表速度建模问题,为高陡构造成像提供一种新方法. 相似文献
5.
We have monitored changes in seismic velocity due to longwall coal-mining in the Selby coalfield, Yorkshire, England by. ten repeated surveys of a surface seismic reflection profile. The direction of face advance in the Barnsley Seam, at 550 m depth, was parallel to the orientation of the profile. The traveltime of a strong reflection event from an anhydrite bed at 150 m depth was measured after processing the data with standard techniques. As the face advanced, the traveltime increased by about 4% overall. In detail, the progressive increase in traveltime correlates well with empirical calculations of differential subsidence between the surface and the anhydrite. However, the magnitude of the change must principally be accounted for by a decrease in seismic velocity, which we attribute to a reduction in the vertical effective stress. 相似文献
6.
平面波偏移是一种面炮偏移方法,相对于常规逐炮偏移,其具有较高的计算效率.然而常规平面波偏移方法成像精度低,且成像时会产生串扰噪音.为此,本文在实现常规平面波偏移算法基础上,引入反演思想实现了基于静态平面波编码的最小二乘偏移理论方法及处理流程,在优化算法基础上对平层模型和复杂砂砾断块模型进行了成像测试并与其他成像策略进行对比.研究结果表明:基于时移编码的平面波最小二乘偏移能有效抑制低频成像噪音和串扰噪音,补偿中深部成像能量,是一种较为有效的保幅成像策略. 相似文献
7.
R.-G. FERBER 《Geophysical Prospecting》1985,33(4):540-542
The time-domain discrete state-space models for lossless layered media, characterized by equal one-way traveltimes and normal-incidence reflection coefficients, can be formulated in a vector-arithmetic notation. This approach allows the computation of the seismic wavefield for arbitrary source and sensor location and is well suited for implementation on modern array processors. Included is an extension to a vector-arithmetic notation for the computation of synthetic vertical seismic profiles. 相似文献
8.
Xu Mingcai 《中国地震研究》2005,19(3):240-248
INTRODUCTIONLarge earthquake and ground surface dislocation produced by the sudden slip of an active faulthidden belowa city can result in serious disaster,bring about huge losses of people’s life and stateproperty,or even make a city destroyed instantly… 相似文献
9.
在地震勘探资料处理中,子波的零相位化有助于提高地震资料的分辨率、改善叠加剖面的质量.常规的相位校正方法是利用测井合成记录对井旁地震记录进行相位估计,然后对整条剖面进行常相位校正,该方法没有考虑地震子波相位的非稳态性（相位随时间和空间变化）.虽然通过局部相似度方法利用最大方差模准则或包络最大相似度准则可以估计出随时间和空间变化的相位属性,但是由于零相位判别准则本身具有一定的局限性,因此精度有限.针对这一问题,本文在局部地震属性和局部平面波模型下,提出了一种井约束的非稳态相位校正方法,该方法不仅考虑了子波相位的非稳态性,而且充分利用了测井合成地震记录进行相位校正精度高的优点.理论模型和实际资料处理表明,本文方法可以有效实现信号的零相位化,有利于改善叠加效果,提高资料的分辨率. 相似文献
10.
用平面波延拓方程进行地震数据的叠前速度反演 总被引：1，自引：1，他引：1
本文讨论地震勘探数据的叠前速度反演方法及其在海洋地震勘探数据上的反演试验.反演主要的计算步骤是:1.采用Fourier-Hankel变换把球面波分解为平面谐波;2.用平面谐波的延拓方程将上行波与下行波同时向下延拓,并计算每一层底部的反射系数和下一层的波阻抗;3.用最小二乘法从波阻抗中确定该层的声波速度.重复第2步与第3步,直到某一预定深度时结束.通过反演试验,对地震振幅比例的改变,子波变形,以及第1层速度和密度的误差对反演方法的稳定性及其精度的影响进行了分析.还通过实际海洋地震勘探数据的反演试验,对这一方法在地震勘探中的应用前景作了论述. 相似文献
11.
A local plane-wave approach of generalized diffraction tomography in heterogeneous backgrounds, equivalent to Kirchhoff summation techniques when applied in seismic reflection, is re-programmed to act as repeated synthetic aperture radar (SAR) imaging for seismic prestack depth migration. Spotlight-mode SAR imaging quickly provides good images of the electromagnetic reflectivity of the ground via fast Fourier transform (FFT)-based signal processing. By calculating only the Green's functions connecting the aircraft to the centre of the illuminated patch, scattering structures around that centre are also recovered. SAR technology requires us to examine seismic imaging from the local point of view, where the quantity and quality of the available information at each image point are what are important, regardless of the survey geometry. When adapted to seismics, a local image of arbitrary size and sampling is obtained by FFT of seismic energy maps in the scattering wavenumber domain around each node of a pre-calculated grid of Green's functions. These local images can be used to generate a classic prestack depth-migrated section by collecting only their centres. However, the local images also provide valuable information around the centre, as in SAR. They can therefore help to pre-analyse prestack depth migration efficiently, and to perform velocity analysis at a very low cost. The FFT-based signal-processing approach allows local, efficient and automatic control of anti-aliasing, noise and resolution, including optimized Jacobian weights. Repeated local imaging could also be used to speed up migration, with interpolation between local images associated with a coarse grid of Green's functions, as an alternative to interpolation of Green's functions. The local images may, however, show distortions due to the local plane-wave approximation, and the velocity variations across their frame. Such effects, which are not necessarily a problem in SAR, should be controlled and corrected to further enhance seismic imaging. Applications to realistic models and to real data show that, despite the distortion effects, the local images can yield similar information to prestack depth migration, including common-image-point gathers for velocity analyses and AVO/AVA effects, at a much lower cost when a small target is considered. 相似文献
12.
平面波分解方法是地震资料处理中的一项关键技术,它广泛地运用在平面波偏移、各类Beam偏移等成像方法中.平面波分解不仅可以提高偏移成像的效率,而且可以压制地震资料中的随机噪音,提高地震数据的信噪比.线性Radon变换（LRT）是一种常见的实现平面波分解的方法,但常规的LRT存在以下两个缺点：（1）分辨率受测不准原理限制;（2）变换结果存在很多噪音和空间假频.为了克服LRT的上述缺点,本文提出一种基于压缩感知的高分辨率平面波分解方法,并利用加权匹配追踪（WMP）技术实现了该方法.该方法将LRT视为一个参数估计问题,并将LRT结果的稀疏性作为约束条件,在压缩感知理论的指导下利用WMP方法得到高分辨率、高信噪比的平面波分解结果.另外,该方法还可以用于提取地震数据的线性信号、压制随机噪音、实现高维地震数据规则化等地震资料处理技术.数值实验结果证明：WMP方法可以有效地提取地震数据中的线性信号,提高LRT的分辨率和信噪比,从而改善平面波分解的质量. 相似文献
13.
云南思茅—中甸宽角反射/折射地震剖面切割松潘—甘孜、扬子和华南三个构造单元的部分区域. 我们利用初至波和壳内反射波走时层析成像获得地壳纵波速度结构. 在获得新的地壳速度结构模型基础上，利用地震散射成像思想和低叠加次数的叠前深度偏移方法重建了研究区的地壳、上地幔反射结构. 综合分析研究区地壳P波速度模型和壳内地震反射剖面发现：沿测线从北至南地壳厚度从约50 km减薄至35 km左右，地壳厚度的减薄量主要体现在下地壳，剖面北段下地壳厚度约为30 km，剖面南段下地壳厚度仅为15 km左右；上地幔顶部局部位置P波速度值偏低，一般为76～78 km/s，反映出云南地区是典型的构造活动区的特点.剖面沿线地壳内地震反射发育，其中莫霍强反射出现在景云桥下方；在景云桥弧形断裂带8～10 km深处出现宽约50 km的强反射带. 相似文献
14.
本文提出了一套叠前地震数据稀疏表达(特征波场合成)、深度偏移成像和层析成像的处理流程.不同于传统的变换域中的数据稀疏表达理论,本文利用局部平面波的传播方向(慢度矢量),在中心炮检点处同时进行波束合成,从而将地震数据投影到局部平面波域(高维空间)中.由于波束合成后的地震数据描述了局部平面波的方向特征,因此称之为特征波场.然而波束合成算法需要估计局部平面波的慢度矢量.当地震数据受噪声干扰时,难以在常规τ-p谱中自动估计局部平面波的射线参数(慢度矢量).本文提出了基于反演理论的特征波场合成方法,可以同时反演局部平面波及其传播方向,从而提高特征波合成的自动化程度并保持方法的稳健性.通过特征波场合成,可以将地震数据分解为单独的震相(波形).这样的数据可以直接用来成像及反演.在局部平面波域中,由于局部平面波的入射与出射射线参数已知,传统的Kirchhoff叠前深度偏移(PSDM)和高斯束/控制束PSDM可以实现从"沿等时面的画弧"到"向反射点(段)的直接投影"的转变,叠前偏移的效率以及成像质量可以同时提高.此外,特征波场与地下反射点(段)的一对一映射关系使得叠前深度偏移与层析成像融为一体,可以极大地提高速度反演的效率.数值试验证明了特征波场合成、叠前深度成像以及层析反演的有效性. 相似文献
15.
We consider a layered heterogeneous viscoelastic transversely isotropic medium with a vertical symmetry axis (a viscoelastic TIV medium) and parameters that depend on depth only. This takes into account intrinsic attenuation, anisotropy and thin layering. The seismic wavefield is decomposed into up- and downgoing waves scaled by the vertical energy flux. This scaling gives important symmetry relationships for both reflection and transmission (R/T) responses. For a stack of homogeneous layers, the exact reflection response can be computed in a numerically stable way by a simple layer-recursive algorithm. We derive exact plane-wave R/T coefficients and several linear and quadratic approximations between two viscoelastic TIV media, as functions of the real-valued horizontal slowness. The approximations are valid for pre- and post-critical values of horizontal slowness provided that the proper complex square roots are used when computing the vertical slowness. Numerical examples demonstrate that the quadratic approximations can be used for large differences in medium parameters, while the linear approximations can be used for small differences. For weak anisotropy it is sufficient to use an isotropic background medium, while for strong anisotropy it is necessary to use a weak TIV or TIV background medium. We also extend the O'Doherty–Anstey formula to the P- and SV-wave transmission responses of a stack of viscoelastic TIV layers, taking into account intrinsic attenuation, anisotropy and thin layering. 相似文献
16.
Giovanni Angelo Meles Lele Zhang Jan Thorbecke Kees Wapenaar Evert Slob 《Geophysical Prospecting》2020,68(6):1834-1846
Seismic images provided by reverse time migration can be contaminated by artefacts associated with the migration of multiples. Multiples can corrupt seismic images, producing both false positives, that is by focusing energy at unphysical interfaces, and false negatives, that is by destructively interfering with primaries. Multiple prediction/primary synthesis methods are usually designed to operate on point source gathers and can therefore be computationally demanding when large problems are considered. A computationally attractive scheme that operates on plane-wave datasets is derived by adapting a data-driven point source gathers method, based on convolutions and cross-correlations of the reflection response with itself, to include plane-wave concepts. As a result, the presented algorithm allows fully data-driven synthesis of primary reflections associated with plane-wave source responses. Once primary plane-wave responses are estimated, they are used for multiple-free imaging via plane-wave reverse time migration. Numerical tests of increasing complexity demonstrate the potential of the proposed algorithm to produce multiple-free images from only a small number of plane-wave datasets. 相似文献
17.
基于微动技术探测盆地浅部地层速度结构1 总被引：1，自引：0，他引：1
本文介绍了利用微动技术探测地表浅层速度结构的方法,并在江苏常州地区一个凹陷盆地内进行了一次野外台阵观测试验,采集场地数据的质量良好.利用空间自相关法得到了不同半径下的自相关函数曲线,该场地的自相关函数显示,对于半径较大的台阵,其自相关系数较好;根据自相关函数提取了场地的频散曲线.通过设定初始模型,利用邻域反演算法得到了该场地的基本速度结构和各层深度分布范围;最后通过与场地附近的人工地震剖面进行对比分析表明,试验结果所揭示的土层结构与浅层人工地震勘探解释结果接近. 相似文献
18.
To better understand (and correct for) the factors affecting the estimation of attenuation (Q), we simulate subsurface wave propagation with the Weyl/Sommerfeld integral. The complete spherical wavefield emanating from a P‐wave point source surrounded by a homogeneous, isotropic and attenuative medium is thus computed. In a resulting synthetic vertical seismic profile, we observe near‐field and far‐field responses and a 90° phase rotation between them. Depth dependence of the magnitude spectra in these two depth regions is distinctly different. The logarithm of the magnitude spectra shows a linear dependence on frequency in the far‐field but not in those depth regions where the near‐field becomes significant. Near‐field effects are one possible explanation for large positive and even negative Q‐factors in the shallow section that may be estimated from real vertical seismic profile data when applying the spectral ratio method. We outline a near‐field compensation technique that can reduce errors in the resultant Q estimates. 相似文献
19.
20.
复杂地表条件下高斯波束叠前深度偏移(英文) 总被引：6，自引：0，他引：6
在复杂地表条件的区域,地震数据的采集和处理是一项极大的挑战。虽然可以通过静校正来消除起伏地表的影响,然而当地表高程以及近地表速度剧烈变化时,简单的垂直时移对地震波场造成的畸变会严重降低偏移成像的质量。基于射线的偏移方法可以直接在起伏地表面进行波场的延拓成像,是解决上述问题的有效手段。本文针对复杂地表条件下的高斯波束叠前深度偏移进行研究,对倾斜叠加公式进行修改,使之包含地表高程以及速度的信息,通过直接在复杂地表面进行平面波的合成,得到了一种具有更高成像精度的改进方法。首先简单介绍常规高斯波束偏移的基本原理和计算流程,并以此为基础,给出复杂地表条件下高斯波束偏移原有的实现方法以及本文的改进方法,最后通过模型和实际资料的试算验证本文方法的有效性。 相似文献