共查询到20条相似文献，搜索用时 15 毫秒
1.
The paper presents the seismic response analysis of a typical multistoreyed brick building. A number of variables representing the physical properties of the structural system, namely, number of storeys from one to four, wall thickness in various storeys from one to one and a half brick thick and damping from 5 per cent to 15 per cent of critical value are considered. A shear beam type multi-degree-of-freedom oscillator is taken to represent these buildings mathematically in which the masses of the floors and walls are assumed as lumped at the floor levels and the floors are assumed as rigid diaphragms. Koyna and El Centro earthquake accelerograms, representing two seismicity levels, are used for computing dynamic response of the buildings. Overturning and torsional effects have been included in the determination of timewise net stresses in the building elements and their seismic capabilities have been examined. From this study the critical sections for providing reinforcing have been identified and the minimum amount of necessary steel has been estimated. 相似文献
2.
The peak dynamic responses of two mathematical models of a fifteen-storey steel moment resisting frame building subjected to three earthquake excitations are computed by the response spectrum and time history methods. The models examined are: a ‘regular’ building in which the centres of stiffness and mass are coincident resulting in uncoupled modes with well-separated periods in each component direction of response; and an ‘irregular’ building with the mass offset from the stiffness centre of the building causing coupled modes with the translational modes having closely spaced periods. Four response spectrum modal combination rules are discussed and are used to predict the peak responses: (1) the square root of the sum of the squares (SRSS) method; (2) the double sum combination (DSC) method; (3) the complete quadratic combination (CQC) method; and (4) the absolute sum (ABS) method. The response spectrum results are compared to the corresponding peak time history values to evaluate the accuracy of the different combination rules. The DSC and the CQC methods provide good peak response estimates for both the regular and irregular building models. The SRSS method provides good peak response estimates for the regular building, but yields significant errors in the irregular building response estimates. The poor accuracy in the irregular building results is attributable to the effects of coupled modes with closely spaced periods. It is concluded that the DSC and CQC methods produce response estimates of equivalent accuracy. Both methods are recommended for general use. In addition to the DSC and CQC rules, the SRSS method is recommended for systems where coupled modes with closely spaced periods do not dominate the response. 相似文献
3.
Concentrated plasticity (CP) models are frequently used in static and dynamic building analysis and have been implemented in available commercial software. This investigation deals with three different CP‐models, a simplified macroelement model (SEM) for a complete building story, a frame element with elasto‐plastic interaction hinges (PH), and a frame element with fiber hinges (FB). The objectives of this work are to evaluate the quality of the earthquake responses predicted by these models and to identify important aspects of their implementation and limitations for their use in dynamic analysis. The three elements are tested in a single‐story asymmetric plan building and in a three‐story steel building. Results show that base shear and global response values are usually computed with better accuracy than interstory deformations and local responses. Besides, the main limitation of elasto‐plastic CP models is to control the displacement offsets that result from perfect elasto‐plastic behavior. On the other hand, calibration of the SEM‐model shows that global responses in steel structures may be computed within 20% error in the mean at a computational cost two orders of magnitude smaller than that of the other CP elements considered. However, the three element models considered lead to increasing levels of accuracy in the dynamic response and their use depends on the refinement of the analysis performed. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
4.
Discrepancies between the computed and actual values of the structural element stiffness imply that a building with nominally symmetric plan is actually asymmetric to some unknown degree and will undergo torsional vibration when subjected to purely translational ground motion. Such accidental torsion leads to increase in structural element deformations which is shown to be essentially insensitive to the uncoupled lateral vibration period of the system but is affected strongly by the ratio of uncoupled lateral and torsional vibration periods. The structural deformations increase, in the mean, by at most 10 and 5 per cent for R/C and steel buildings, respectively, and by much smaller amounts for a wide range of system parameters. The increase in structural deformations due to stiffness uncertainty is shown to be much smaller than implied by the accidental torsional provisions in the Uniform Building Code and most other building codes. 相似文献
5.
Different modelling aspects of structures isolated using the frictional pendulum system and subjected to earthquake ground motions are studied herein. Although the vertical dynamics of these structures is given special emphasis, other effects such as large isolator deformations and bidirectional input motion are also considered. Different structural models of the FPS are developed and tested for single-storey structures and a real four-storey building frame; among them, an ‘exact’ formulation of the FPS force–deformation constitutive relationship is presented. Results show that global building responses can be computed within 20 per cent error in the mean using a simplified model that ignores the vertical motion of the building; however, structural member deformations and forces need to be computed using a model that considers such motion. This is of particular importance when there exist correlation between the horizontal and vertical components of ground motion. Further, a physical model of the FPS is introduced and used to determine the response of a real four-storey frame, including uplift and downward impact. Results from this analysis show that local column responses may vary substantially depending on the stiffness of the isolation storey and the presence of a mass at the isolation level. Such mass is capable of filtering the large increase in column shear that results from the impact of the structure after uplift. Uplift occurs at several instants of the response of the structure considered, leading to an increase in column base shear as large as 3 times the shear obtained by ignoring the vertical dynamics of the building. © 1998 John Wiley & Sons, Ltd. 相似文献
6.
Spatial variation of acceleration response spectra is examined using strong motion records for a large number of events from dense accelerometer arrays at Chiba in Japan and SMART-1 in Lotung, Taiwan. The effects of earthquake component, structural damping, earthquake magnitude, focal depth, epicentral distance, structural time period, and station separation on the intra-event variation of response spectra are examined first through an empirical analysis and then through a least-square regression fit for parametric study. A very large scatter of the response spectra ratio is observed for both arrays, especially for SMART-1 array. The mean values of the ratio vary from 10 to 20 per cent for Chiba array while they vary from 25 to 50 per cent for SMART-1 array. The coefficients of variation of the ratio range from 5 to 25 per cent for Chiba array and 30 to 50 per cent for SMART-1 array. The correlation among response spectra is found to be inversely proportional to station separation and shows frequency dependence. For larger time periods, the correlation is lower and not higher. The correlation is also lower for UD earthquake component as compared to the two horizontal components. For higher damping ratio, the correlation among spectra is higher. The effect of the earthquake magnitude, focal depth and epicentral distance on the spatial variation is complex. The three parameters having implicit interdependence, considering their combined effect, a positive contribution to the value of ratio of response spectra is observed in the case of larger earthquake events. Furthermore, as mentioned above, the spatial variation for SMART-1 array is much larger than that for Chiba array. This difference can be attributed mainly to the difference in distance between the instruments in the two arrays. However, some of the difference is considered to be due to site specific characteristics. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
7.
Earthquake‐induced loss assessment of steel frame buildings with special moment frames designed in highly seismic regions 
下载免费PDF全文
下载免费PDF全文 This paper discusses an analytical study that quantifies the expected earthquake‐induced losses in typical office steel frame buildings designed with perimeter special moment frames in highly seismic regions. It is shown that for seismic events associated with low probabilities of occurrence, losses due to demolition and collapse may be significantly overestimated when the expected loss computations are based on analytical models that ignore the composite beam effects and the interior gravity framing system of a steel frame building. For frequently occurring seismic events building losses are dominated by non‐structural content repairs. In this case, the choice of the analytical model representation of the steel frame building becomes less important. Losses due to demolition and collapse in steel frame buildings with special moment frames designed with strong‐column/weak‐beam ratio larger than 2.0 are reduced by a factor of two compared with those in the same frames designed with a strong‐column/weak‐beam ratio larger than 1.0 as recommended in ANSI/AISC‐341‐10. The expected annual losses (EALs) of steel frame buildings with SMFs vary from 0.38% to 0.74% over the building life expectancy. The EALs are dominated by repairs of acceleration‐sensitive non‐structural content followed by repairs of drift‐sensitive non‐structural components. It is found that the effect of strong‐column/weak‐beam ratio on EALs is negligible. This is not the case when the present value of life‐cycle costs is selected as a loss‐metric. It is advisable to employ a combination of loss‐metrics to assess the earthquake‐induced losses in steel frame buildings with special moment frames depending on the seismic performance level of interest. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
8.
During a severe earthquake, steel moment resisting frames are expected to experience significant inelastic deformation in their members and joints. This behaviour is dependent upon several design parameters such as member sizes, frame's overstrength, member deformation capacities and the detailing of components. In this study, the influence of such aspects on the inelastic response of frames is investigated. Inelastic static and dynamic analyses were performed on four frames of different designs for a typical six-storey building. The frames were designed and detailed in accordance with current North American code requirements. The computed response of each frame was compared with the behaviour expected by the codes. Recommendations for a design procedure are suggested for improving the structural performance of low-rise steel frames subjected to strong earthquake excitation. 相似文献
9.
Stavros A. Anagnostopoulos 《地震工程与结构动力学》1981,9(5):459-476
An evaluation is made of response spectrum techniques as applied to seismic analysis and design of steel template offshore platforms. Such structures are designed as braced space frames for several loading conditions, including the simultaneous action of three earthquake components. Base shears as well as gross forces and combined stresses in members of three different platforms are computed for 30 real, three-component earthquakes and response spectrum predictions, obtained by several modal-spatial combination methods, are compared to time history solutions. Results are presented in the form of error statistics. The three approximations examined are: (a) combination of modes for one component input, (b) combination of the three partial responses to obtain estimates of total response and (c) combination of gross forces to derive maximum design stresses at a section. Attention is focused on corner piles because these are among the most heavily penalized members by three-component excitations. It is shown that commonly used spatial combination rules may underestimate gross forces in design controlling corner members by 15–30 per cent on the average. This is attributed to correlations between motion components that create additive effects along certain directions. Typical estimates of combined stresses, however, are found to be slightly conservative. 相似文献
10.
This investigation is concerned with accidental torsion in buildings resulting from rotational excitation (about a vertical axis) of the building foundations as a result of spatially non-uniform ground motions. Because of this accidental torsion, the displacements and deformations in the structural elements of the building are likely to increase. This increase in response is evaluated using actual base rotational excitations derived from ground motions recorded at the base of 30 buildings during recent California earthquakes. Accidental torsion has the effect of increasing the building displacements, in the mean, by less than 5 per cent for systems that are torsionally stiff or have lateral vibration periods longer than half a second. On the other hand, short period (less than half a second) and torsionally flexible systems may experience significant increases in response due to accidental torsion. Since the dependence between this increase in response and the system parameters is complex, two simplified methods are developed for conveniently estimating this effect of accidental torsion. They are the ‘accidental eccentricity’ and the ‘response spectrum’ method. The computed accidental eccentricities are much smaller than the typical code values, 0.05bb or 0.1b, except for buildings with very long plan dimensions (b ≥ 50 m). Alternatively, by using the response spectrum method the increase in response can be estimated by computing the peak response to each base motion independently and combining the peak values using the SRSS rule. 相似文献
11.
It is demonstrated that the addition of a tuned mass-spring-dashpot system with a relatively small mass and a high damping ratio can be an effective way to increase the inherent damping characteristics of buildings and reduce, thus, their response to earthquake excitations. The demonstration is based on a theoretical formulation and on numerical and experimental studies that confirm this formulation. In the theoretical formulation, it is shown first that, if certain conditions are satisfied, the damping ratios in two of the modes of the system that is formed by a building and an appendage in resonance are approximately equal to the average of the corresponding damping ratios of the building and the appendage. Based on this finding, it is then shown that an attached appendage with a high damping ratio and tuned to the fundamental frequency of a building may increase the damping ratio in the fundamental mode of the building to a value close to half the damping ratio of the appendage. In the numerical study, the response of a ten-storey shear building is analysed under two different earthquake ground motions with and without the proposed resonant appendages. Appendages with damping ratios of 20 and 30 per cent are considered. In this study, it is found that under one of the ground motions the maximum displacement of the building's roof is reduced 30 per cent with the appendage with 20 per cent damping and 39 per cent with the one with 30 per cent damping. Similarly, with these two appendages the building's base shear is reduced 31 and 41 per cent, respectively. In the experimental study, a wooden three-storey structural model is tested in a shaking table with and without an appendage designed and constructed to have a damping ratio of 53-5 per cent. The test is conducted under random and sinusoidal base excitations. In the shaking table test under random excitation, the attached appendage reduces the response of the model 38-6 per cent, while in that under sinusoidal vibration 45-2 per cent. 相似文献
12.
A study is made of the dynamic behaviour of multistorey steel rigid-frame buildings with set-back towers. The effects of set-backs upon the building frequencies and mode shapes are examined. Then the effects of set-backs on seismic response are investigated by analysing the response of a series of set-back building frame models to the El Centro ground motion. Finally, the computed responses to the El Centro earthquake are compared with some code provisions dealing with the seismic design of set-back buildings. The conclusions derived from the study include the following:
- 1. The higher modes of vibration of a set-back building can make a very substantial contribution to its total seismic response; this contribution increases with the slenderness of the tower.
- 2. Some of the important response parameters for the tower portion of a set-back building are substantially larger than for a related uniform building.
- 3. For very slender towers, the transition region between the tower and the base may be subjected to very large storey shears.
13.
针对当前钢筋混凝土震后存活预测相关方法存在预测值与实际值拟合度低的问题,提出基于有限元的钢筋混凝土框架结构震后可存活概率预测方法。利用混凝土本构模型关联数值和钢筋本构模型数值计算,实现钢筋混凝土框架材料本构模型关联数值分析。结合建筑和结构施工图实现钢筋混凝土有限元模拟,将钢筋混凝土框架有限元模型的最大竖向荷载作为结构整体构造竖向极限承载力,并引入随机Pushdown方法及随机竖向IDA法得到钢筋混凝土框架震后可存活概率。经实验证明,将有限元应用至钢筋混凝土框架结构震后可存活概率预测中切实可行;预测值与实际值拟合度高于目前常用方法。所提方法的性能完善,可为该领域发展提供可借鉴的信息。 相似文献
14.
Several reinforced concrete frames with different dissipator distributions, and a conventional moment-resisting frame, are compared in order to select the best dissipator distribution from the point of view of seismic response and structural design. The structures with dissipators are designed according to a criterion proposed in the present paper. Each frame is excited with a set of eleven simulated accelerograms. The choice of the best dissipation distribution is based mainly on the differences between the mean of the maximum overturning moments developed at the base of the frames and between the weights of steel reinforcement and concrete resulting from the structural design of each frame. A comparison of initial construction costs of a building with dissipators and a conventional building shows that the former is 3·5 per cent more expensive. 相似文献
15.
In an effort to determine the nature and size of the response of unusually shaped power station buildings, an investigation of one power station building has been made, both theoretically and experimentally. The dynamic response of the structure to wind excitation has been monitored, analysed and compared with theoretical values obtained from an analysis of a simplified structure. The shapes of pure modes of vibration are consistent with the predicted shapes, and correlation between measured and predicted frequency is better than 10 per cent. Damping measurements from the experimental study are included where the signal/noise ratio permitted, and these were found to be in a range that is consistent with values found in other types of steel construction. 相似文献
16.
基于Benchmark模型的抑制屈曲支撑耗能减振作用分析 总被引：2，自引：0，他引：2
抑制屈曲支撑可在拉压循环荷载作用下均达到屈服,拉压承载力基本一致,滞回曲线稳定饱满,耗能能力强。基于Benchmark模型对安装抑制屈曲支撑的钢框架结构基于ANSYS的数值分析表明,抑制屈曲支撑不仅可使结构在小震时的抗侧刚度有所提高,同时在大震时通过其往复滞回变形发挥耗能减振作用,大大地降低了结构的地震响应,提高了结构的抗震性能。同时分析表明考虑高阶振型影响的能力谱分析方法是一种更为精确的分析方法。 相似文献
17.
Dougla S. A. Foutch 《地震工程与结构动力学》1978,6(3):265-294
The Ralph M. Parsons World Headquarters building, a twelve-storey steel frame structure, was subjected to a series of forced vibration tests. The natural frequencies, three-dimensional mode shapes and damping coefficients of nine modes of vibration were determined. Other features of this investigation included the study of non-linearities associated with increasing levels of response, detailed measurements of the deformation of the first floor and the ground surrounding the structure, and measurements of strain in one of the columns of the structure during forced excitation. The dynamic characteristics of the building determined by these tests are compared to those predicted by a finite element model of the structure. The properties of primarily translational modes are predicted reasonably well, but adequate prediction of torsional motions is not obtained. The comparison between measured and predicted strains suggests that estimates of stress determined from finite element analyses of buildings might be within 25 per cent of those experienced by the structure for a known excitation. 相似文献
18.
The purpose of this research is to use data from experiments to formulate a mathematical model that will predict the non-linear response of a single-storey steel frame to an earthquake input. The process used in this formulation is system identification. In experiments performed on a shaking table, the frame was subjected to two earthquake motions at several intensities. In each case the frame underwent severe inelastic deformation. A computer program which incorporates the concepts of system identification makes use of the recorded data to establish four parameters in a non-linear mathematical model. When different amounts of data are used in the program, parameter sets are established which give the best model response for that amount of test data. The resulting sets of parameters reflect the way in which the properties of the structure change during the excitation. However, when the full durations of the different excitations are used, the sets of parameters are almost identical. For each of these sets of parameters, the correlation of the computed accelerations with the measured is excellent, and the shape of the computed displacement response compares very well with the measured response, although the permanent offset of the displacements is not computed exactly. Suggestions are given on how to overcome this deficiency in the mathematical model. 相似文献
19.
结构地震倒塌判别准则是工程结构强震分析的关键问题。在层损伤模型的基础上,建立了基于推覆分析的建筑结构整体损伤模型,并以国内某2层2跨平面钢框架结构拟静力试验为背景,应用有限元程序ABAQUS对平面钢框架进行了强震倒塌数值模拟。分析了钢框架结构的倒塌破坏过程,基于建议地震倒塌判别准则研究了钢框架结构的损伤演化规律。结果表明:钢框架结构在强震作用下的损伤发展顺序与塑性发展顺序一致;基于推覆分析的结构整体损伤模型能较好的体现强震作用下钢框架结构的损伤演化规律,且在上下界处收敛;强震作用下,钢框架结构的初始损伤主要由结构的残余侧移引起,而后期损伤主要由结构的承载力和刚度退化引起。 相似文献