共查询到20条相似文献，搜索用时 47 毫秒
1.
Carbonate drifts have so far not been as intensely investigated as their siliciclastic equivalents, especially from an ichnological perspective. The aim of this work is therefore to provide an overview of the different bioturbation styles in carbonate drifts for ichnologists and sedimentologists working in such deposits. Different types of carbonate drifts from the Maldives were studied to address this objective. The cores recovered during International Ocean Discovery Program Expedition 359 were examined to provide the sedimentological and ichnological data for a detailed analysis of the ichnology of carbonate drifts. The ichnological characteristics of the Maldives drifts are compared to other carbonate drifts in order to discuss similarities and differences, and thus provide an overview of the general characteristics of carbonate drift ichnology. These drifts are located in the Santaren Channel which lines Great Bahama Bank, along the Marion Plateau in Australia, in the Limassol and Larnaca basins in Cyprus and in the Danish Basin in Denmark. The common characteristics of bioturbation in carbonate drifts are: (i) the complete bioturbation of the sediment with bioturbation indexes between four and six; (ii) the occurrence of distinctive trace fossils limited to facies contacts or condensed intervals; (iii) a typical ichnoassemblage consisting of Thalassinoides, Scolicia, Planolites, Zoophycos, Chondrites, Phycosiphon and Palaeophycus; (iv) the contiguous occurrence of ichnogenera from different tiers, with only Zoophycos and Chondrites as deep tiers; and (v) distinct infills of the traces including particulate organic matter, pyrite, silica and celestine. In addition, the main ichnofacies of carbonate drifts is the Zoophycos ichnofacies. Ichnofabrics grade from coarse‐grained and completely bioturbated to ichnofabrics with present to rare trace fossils and preserved sedimentary structures. The type and intensity of the bioturbation is controlled by the amount of organic matter and the oxygenation at the sea floor that is determined by the action of bottom currents and the sea‐level fluctuations affecting the carbonate factory in carbonate platforms bordering the basins where the carbonate drifts form. The study of the bioturbation in core and outcrop provides palaeoenvironmental information about carbonate‐drift deposits that complement the classical sedimentological data. 相似文献
2.
Carbonate environments inhabit the realm of the surface, intermediate and deep currents of the ocean circulation where they produce and continuously deliver material which is potentially deposited into contourite drifts. In the tropical realm, fine‐grained particles produced in shallow water and transported off‐bank by tidal, wind‐driven, and cascading density currents are a major source for transport and deposition by currents. Sediment production is especially high during interglacial times when sea level is high and is greatly reduced during glacial times of sea‐level lowstands. Reduced sedimentation on carbonate contourite drifts leads to early marine cementation and hardened surfaces, which are often reworked when current strength increases. As a result, reworked lithoclasts are a common component in carbonate drifts. In areas of temperate and cool water carbonates, currents are able to flow across carbonate producing areas and incorporate sediment directly to the current. The entrained skeletal carbonate particles have variable bulk density and shapes that lower the prediction of transport rates in energy‐based transport models, as well as prediction of current velocity based on grain size. All types of contourite drifts known in clastic environments are found in carbonate environments, but three additional drift types occur in carbonates because of local sources and current flow diversion in the complicated topography inherent to carbonate systems. The periplatform drift is a carbonate‐specific plastered drift that is nearly exclusively made of periplatform ooze. Its geometry is built by the interaction of along‐slope currents and downslope currents, which deliver sediment from the adjacent shallow‐water carbonate realm to the contour current via a line source. Because the periplatform drift is plastered on the slopes of the platforms it is also subject to mass gravity flow and large slope failures. At platform edges, a special type of patch drift develops. These hemiconal platform‐edge drifts also contain exclusively periplatform ooze but their geometry is controlled by the current around the corner of the platform. At the north‐western end of Little and Great Bahama Bank are platform‐edge drifts that are over 100 km long and up to 600 m thick. A special type of channel‐related drift forms when passages between carbonate buildups or channels within a platform open into deeper water. A current flowing in these channels will entrain material shed from the sediment producing areas. At the channel mouth, the sediment‐charged current deposits its sediment load into the deeper basin. With continuous flow, a submarine delta drift is built that progrades into the deep water. The strongly focused current forming the delta drift, is able to rework coarse skeletal grains and clasts, making this type of carbonate drift the coarsest drift type. 相似文献
3.
Gregor P. Eberli Daniel Bernoulli Adam Vecsei Rizky Sekti Mark Grasmueck Thomas Lüdmann Flavio S. Anselmetti Maria Mutti Giovanna Della Porta 《Sedimentology》2019,66(4):1266-1301
The Upper Cretaceous (Campanian–Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is compared to newly discovered contourite drifts in the Maldives. Like the drift deposits in the Maldives, the Orfento Formation fills a channel and builds a Miocene delta‐shaped and mounded sedimentary body in the basin that is similar in size to the approximately 350 km2 large coarse‐grained bioclastic Miocene delta drifts in the Maldives. The composition of the bioclastic wedge of the Orfento Formation is also exclusively bioclastic debris sourced from the shallow‐water areas and reworked clasts of the Orfento Formation itself. In the near mud‐free succession, age‐diagnostic fossils are sparse. The depositional textures vary from wackestone to float‐rudstone and breccia/conglomerates, but rocks with grainstone and rudstone textures are the most common facies. In the channel, lensoid convex‐upward breccias, cross‐cutting channelized beds and thick grainstone lobes with abundant scours indicate alternating erosion and deposition from a high‐energy current. In the basin, the mounded sedimentary body contains lobes with a divergent progradational geometry. The lobes are built by decametre thick composite megabeds consisting of sigmoidal clinoforms that typically have a channelized topset, a grainy foreset and a fine‐grained bottomset with abundant irregular angular clasts. Up to 30 m thick channels filled with intraformational breccias and coarse grainstones pinch out downslope between the megabeds. In the distal portion of the wedge, stacked grainstone beds with foresets and reworked intraclasts document continuous sediment reworking and migration. The bioclastic wedge of the Orfento Formation has been variously interpreted as a succession of sea‐level controlled slope deposits, a shoaling shoreface complex, or a carbonate tidal delta. Current‐controlled delta drifts in the Maldives, however, offer a new interpretation because of their similarity in architecture and composition. These similarities include: (i) a feeder channel opening into the basin; (ii) an excavation moat at the exit of the channel; (iii) an overall mounded geometry with an apex that is in shallower water depth than the source channel; (iv) progradation of stacked lobes; (v) channels that pinch out in a basinward direction; and (vi) smaller channelized intervals that are arranged in a radial pattern. As a result, the Upper Cretaceous (Campanian–Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is here interpreted as a carbonate delta drift. 相似文献
4.
Thierry Mulder Emmanuelle Ducassou Vincent Hanquiez Mlanie Principaud Kelly Fauquembergue Elsa Tournadour Ludivine Chabaud John Reijmer Audrey Recouvreur Herv Gillet Jean Borgomano Anais Schmitt Paul Moal 《Sedimentology》2019,66(4):1192-1221
New data collected along the slopes of Little and Great Bahama Bank and the abyssal plain of the Bahama Escarpment provides new insights about contour current‐related erosive structures and associated deposits. The Bahamian slope shows abundant evidence of bottom current activity such as furrows, comet‐like structures, sediment waves and drifts. At a seismic scale, large erosion surfaces and main periods of drift growth resulted from current acceleration related to plate tectonic processes and progressive opening and closure of gateways and long‐term palaeoclimate evolution. At present‐day, erosion features and contourite drifts are either related to relatively shallow currents (<1000 m water depth) or to deep currents (>2500 m water depth). It appears that the carbonate nature of the drifts does not impact the drift morphology at the resolution addressed in the present study. Classical drift morphologies defined in siliciclastic environments are found, such as mounded, plastered and separated drifts. In core, contourite sequences show a bi‐gradational trend that resembles classical contourite sequences in siliciclastic deposits showing a direct relationship with a change in current velocity at the sea floor. However, in a carbonate system the peak in grain size is associated with increased winnowing rather than increased sediment supply as in siliciclastic environments. In addition, the carbonate contourite sequence is usually thinner than in siliciclastics because of lower sediment supply rates. Little Bahama Bank and Great Bahama Bank contourites contain open‐ocean input and slope‐derived debris from glacial episodes. Inner platform, platform edge and open ocean pelagic input characterize the classical periplatform ooze during interglacials. In all studied examples, the drift composition depends on the sea floor topography surrounding the drift location and the type of sediment supply. Carbonate particles are derived from either the slope or the platform in slope and toe of slope drifts, very deep contourites have distant siliciclastic sources of sediment supply. The recent discovery of the importance of a large downslope gravitary system along Bahamian slopes suggests frequent interactions between downslope and along‐slope (contour currents) processes. The interlayering of mass flow deposits and contourites at a seismic scale or the presence of surface structures associated with both contour currents and mass flow processes shows that both processes act at the same location. Finally, contour currents have an important impact on the repartition of deep‐water coral mounds. Currents can actively interact with mounds as a nutrient and oxygen supplier or have a passive interaction, with mounds solely being obstacles orienting erosion and deposition. 相似文献
5.
Hayfaa Abdul Aziz Enrique Sanz-Rubio† Jose P. Calvo‡ Fredirik J. Hilgen Wout Krijgsman 《Sedimentology》2003,50(2):211-236
ABSTRACT The middle Miocene sedimentary fill of the Calatayud Basin in north‐eastern Spain consists of proximal to distal alluvial fan‐floodplain and shallow lacustrine deposits. Four main facies groups characteristic of different sedimentary environments are recognized: (1) proximal and medial alluvial fan facies that comprise clast‐supported gravel and subordinate sandstone and mudstone, the latter exhibiting incipient pedogenic features; (2) distal alluvial fan facies, formed mainly of massive mudstone, carbonate‐rich palaeosols and local carbonate pond deposits; (3) lake margin facies, which show two distinct lithofacies associations depending on their distribution relative to the alluvial fan system, i.e. front (lithofacies A), comprising massive siliciclastic mudstone and tabular carbonates, or lateral (lithofacies B) showing laminated and/or massive siliciclastic mudstone alternating with tabular and/or laminated carbonate beds; and (4) mudflat–shallow lake facies showing a remarkable cyclical alternation of green‐grey and/or red siliciclastic mudstone units and white dolomitic carbonate beds. The cyclic mudflat–shallow lake succession, as exposed in the Orera composite section (OCS), is dominantly composed of small‐scale mudstone–carbonate/dolomite cycles. The mudstone intervals of the sedimentary cycles are interpreted as a result of sedimentation from suspension by distal sheet floods, the deposits evolving either under subaerial exposure or water‐saturated conditions, depending on their location on the lacustrine mudflat and on climate. The dolomite intervals accumulated during lake‐level highstands with Mg‐rich waters becoming increasingly concentrated. Lowstand to highstand lake‐level changes indicated by the mudstone/dolomite units of the small‐scale cycles reflect a climate control (from dry to wet conditions) on the sedimentation in the area. The spatial distribution of the different lithofacies implies that deposition of the small‐scale cycles took place in a low‐gradient, shallow lake basin located in an interfan zone. The development of the basin was constrained by gradual alluvial fan aggradation. Additional support for the palaeoenvironmental interpretation is derived from the isotopic compositions of carbonates from the various lithofacies that show a wide range of δ18O and δ13C values varying from ?7·9 to 3·0‰ PDB and from ?9·2 to ?1·7‰ PDB respectively. More negative δ18O and δ13C values are from carbonate‐rich palaeosols and lake‐margin carbonates, which extended in front of the alluvial fan systems, whereas more positive values correspond to dolomite beds deposited in the shallow lacustrine environment. The results show a clear trend of δ18O enrichment in the carbonates from lake margin to the centre of the shallow lake basin, thereby also demonstrating that the lake evolved under hydrologically closed conditions. 相似文献
6.
Cyclothemic sedimentary rocks of the Plio-Pleistocene Petane Group outcrop extensively in the Tangoio block of central Hawke's Bay, New Zealand. They are products of inner to mid-shelf sedimentation and were deposited during glacio-eustatic sea level fluctuations along the western margin of a shallow, pericontinental seaway located in a forearc setting. The succession consists of five laterally continuous cyclothems, each containing a fine grained interval of silt and a coarse grained interval of siliciclastic sand ± gravel or limestone. Five sedimentary facies assemblages comprising 20 separate facies have been recognized. Coarse grained intervals of cyclothems were deposited mostly during relative sea level lowstands and contain up to four facies assemblages: (1) a non-marine assemblage (with three component facies, representing braided river and overbank environments); (2) an estuarine assemblage (with three component facies, representing tidal flat and mud-dominated estuarine environments); (3) a siliciclastic shoreline assemblage (with six component facies, representing greywacke pebble beach, shoreface and inner shelf environments); and (4) a carbonate shelf assemblage (with four component facies, representing tide-dominated, inshore and shallow marine environments). Fine grained intervals of cyclothems were deposited during sea level highstands when the Tangoio area was generally experiencing mid-shelf sedimentation. This produced an offshore assemblage consisting of four component facies. The distribution of facies assemblages during relative sea level lowstands was dependent upon proximity to the shoreline, the type and rate of sediment supply to the basin, and shelf hydrodynamics. Carbonate shelf facies dominate coarse grained intervals in Cyclothems 3–5, but siliciclastic shoreline and non-marine facies dominate in Cyclothems 1 and 2. The abrupt change from siliciclastic to carbonate sedimentation during relative sea level lowstand deposition is thought to have been induced by rapidly falling interglacial to glacial sea level accentuated by regional tectonic shoaling. This caused most of the terrigenous sediment supply to bypass the Tangoio area. Consequently, carbonate sediment accumulated in inshore and shallow marine settings. Facies assemblages rarely show lateral interdigitation, but are vertically stratified over the entire Tangoio block. Facies successions in each cyclothem preserve a record of relative sea level change during deposition of the Petane Group and are consistent with a Plio-Pleistocene sea level change in eastern New Zealand of c. 75–150 m, i.e. approximately the magnitude suggested for Late Quaternary glacio-eustatic sea level changes. 相似文献
7.
《Sedimentology》2018,65(5):1558-1589
Most of the present knowledge of shallow‐marine, mixed carbonate–siliciclastic systems relies on examples from the carbonate‐dominated end of the carbonate–siliciclastic spectrum. This contribution provides a detailed reconstruction of a siliciclastic‐dominated mixed system (Pilmatué Member of the Agrio Formation, Neuquén Basin, Argentina) that explores the variability of depositional models and resulting stratigraphic units within these systems. The Pilmatué Member regressive system comprises a storm‐dominated, shoreface to basinal setting with three subparallel zones: a distal mixed zone, a middle siliciclastic zone and a proximal mixed zone. In the latter, a significant proportion of ooids and bioclasts were mixed with terrigenous sediment, supplied mostly via along‐shore currents. Storm‐generated flows were the primary processes exporting fine sand and mud to the middle zone, but were ineffective to remove coarser sediment. The distal zone received low volumes of siliciclastic mud, which mixed with planktonic‐derived carbonate material. Successive events of shoreline progradation and retrogradation of the Pilmatué system generated up to 17 parasequences, which are bounded by shell beds associated with transgressive surfaces. The facies distribution and resulting genetic units of this siliciclastic‐dominated mixed system are markedly different to the ones observed in present and ancient carbonate‐dominated mixed systems, but they show strong similarities with the products of storm‐dominated, pure siliciclastic shoreface–shelf systems. Basin‐scale depositional controls, such as arid climatic conditions and shallow epeiric seas might aid in the development of mixed systems across the full spectrum (i.e. from carbonate‐dominated to siliciclastic‐dominated end members), but the interplay of processes supplying sand to the system, as well as processes transporting sediment across the marine environment, are key controls in shaping the tridimensional facies distribution and the genetic units of siliciclastic‐dominated mixed systems. Thus, the identification of different combinations of basin‐scale factors and depositional processes is key for a better prediction of conventional and unconventional reservoirs within mixed, carbonate–siliciclastic successions worldwide. 相似文献
8.
Palaeogene passive margin sediments on the US mid‐Atlantic coastal plain provide valuable insight into facies interaction and distribution on mixed carbonate–siliciclastic shelves. This study utilizes well cuttings, outcrop, core, and seismic data to document temporal and spatial variations in admixed bryozoan‐rich skeletal carbonates and sandy siliciclastic units that were deposited on a humid passive margin located in the vicinity of a major marine transition zone. This zone was situated between north‐flowing, warm waters of the ancestral Gulf Stream (carbonate dominated settings) and south‐flowing, cold waters of the ancestral Labrador Current (siliciclastic dominated settings). Some degree of mixing of carbonates and siliciclastics occurs in all facies; however, siliciclastic‐prone sediments predominate in nearshore settings, while carbonate‐prone sediments are more common in more open marine settings of the inner shelf break and deep shelf. A distinctive dual‐break shelf depositional profile originated following a major Late Cretaceous to Palaeocene transgression that drowned the earlier shallow platform. This profile was characterized by prominent mid‐shelf break dividing the shallow shelf from the deep shelf and a major continental shelf/slope break. Incomplete filling of available accommodation space during successive buildup of the shallow shelf preserved the topographic break on this passive margin. Storm wave base also contributed to the preservation of the dual‐break shelf geometry by beveling shallow shelf sediments and transporting them onto and seaward of the mid‐shelf break. Sediment fines in deep shelf facies were produced in place, transported downdip from the shallow shelf by storm ebb currents and boundary currents, and reworked from adjacent areas of the deep shelf by strike‐parallel boundary currents. Regional climate and boundary currents controlled whether carbonate or siliciclastic material was deposited on the shelf, with warmer waters and more humid climates favouring carbonate deposition and cooler, more arid conditions favouring glaucony and siliciclastic dominated deposition. Continuous wave and current sweeping of the shallow shelf favoured deposition of mud‐lean facies across much of the shallow shelf. Skeletal components in much of the carbonate‐rich strata formed in warm, nutrient‐rich subtropical waters, as indicated by widespread occurrences of larger benthic foraminifera and molluscan assemblages. These indicators of warm water deposition within the bryozoan‐mollusk‐rich carbonate assemblage on this shelf provide an example of a warm water bryomol assemblage; such facies generally are associated with cooler water depositional settings. 相似文献
9.
Siliciclastic intervals in Lower Permian carbonate–siliciclastic cyclothems in western Kansas record climate control on facies progression, deposition and preservation. The 26 000 km2 study area comprises seven marine‐continental (carbonate–siliciclastic) cyclothems caused by glacioeustasy. Core data and a three‐dimensional geological model provide a detailed view of the sub‐surface on a gently sloping ramp. Siliciclastic intervals in the cyclothems are fine‐grained red beds with extensive pedogenic features, indicating a continental origin. Bed geometry (sheet‐like deposits that thin to the east), lateral grading, grain size (very fine‐grained sand to silt) and grain angularity (sub‐angular to angular) suggest that the sediment is loess sourced from the west, probably the Ancestral Rocky Mountains. There is a repeated record of glacial‐cycle‐scale, climate‐controlled cyclicity within siliciclastic intervals that has not been recognized previously. Aeolian silt grain size coarsens upward towards the middle, then fines upward in each siliciclastic interval. When sea‐level was high (interglacial) and carbonate production flourished, aeolian sedimentation nearly ceased, suggesting increased vegetation and rainfall at the source. As sea‐level fell, fine‐grained siliciclastic sediments were deposited under relatively dry, but seasonally wet conditions on an exposed ramp. Laterally graded coarser grained siliciclastic sediments with diagnostic fabrics indicate drier conditions with seasonal rainfall during a continued relative fall in sea‐level. The coarsest siliciclastic sediments were deposited during the lowest sea‐level and driest conditions, but still with sufficient seasonal moisture to allow vegetative cover and bioturbation. Subsequent upward fining is correlated with sedimentological indications of wetter conditions during relative sea‐level rise. Unlike common sequence stratigraphic models that relate siliciclastic sediment accumulation to base‐level rise, continental deposits were preserved because plants and pedogenesis stabilized aeolian sediment. The aggradational landscape formed by this process had several metres of positive relief that reduced accommodation for overlying marine carbonate strata. Thus, this mechanism for continental siliciclastic aggradation has a significant effect on sequence stratigraphic architecture. 相似文献
10.
《Australian Journal of Earth Sciences》2013,60(5):665-683
The Great Barrier Reef represents the largest modern example of a mixed siliciclastic‐carbonate system. The Burdekin River is the largest source of terrigenous sediment to the lagoon and is therefore an ideal location to investigate regional patterns of mixed sedimentation. Sediments become coarser grained and more poorly sorted away from the protection of eastern headlands, with mud accumulation focused in localised ‘hot spots‘ in the eastern portion of embayments protected from southeast trade winds. The middle shelf has a variable facies distribution but is dominated by coarse carbonate sand. North of Bowling Green Bay, modern coarse carbonate sand and relict quartzose sand occur. Shore‐normal compositional changes show Ca‐enrichment and Al‐dilution seawards towards the reef, and shore‐parallel trends show Al‐dilution westwards (across bays) along a Ca‐depleted mixing line. Intermediate siliciclastic‐carbonate sediment compositions occur on the middle shelf due to the abundance of relict terrigenous sand, a pattern that is less developed on the narrow northern Great Barrier Reef shelf. Rates of sediment deposition from seismic evidence and radiochemical tracers suggest that despite the magnitude of riverine input, 80–90% of the Burdekin‐derived sediment is effectively captured in Bowling Green Bay. Over millennial time‐scales, stratigraphic controls suggest that sediment is being preferentially accreted back to the coast. 相似文献
11.
利用渤海湾盆地冀中坳陷饶阳凹陷留西油田留18断块内岩心、录井、测井、三维地震以及生产动态资料,应用层次分析的方法,对远源浅水辫状河三角洲前缘进行了相带划分,对砂体构型进行了解剖,明确了各相带内沉积构型样式的特征,建立了远源浅水辫状河三角洲前缘精细的沉积构型模式。研究表明: (1)研究区水体整体较浅,远源浅水辫状河三角洲前缘亚相广泛发育,并进一步分为前缘近端、前缘中端和前缘远端3个相带,不同相带在砂体厚度、岩性组合特征和砂体横向连通性等方面存在差异。(2)前缘远端水下分流河道水动力较弱,所携带沉积物较少,形成横向连通性较差的小规模河口坝,河口坝之间的厚层泥质披覆夹层为主要的夹层类型。(3)前缘中端分流河道水动力强度中等,形成串珠状或分叉树枝状的河口坝,单一河口坝由2~4期前积增生体构成,前积倾角约2.2°,增生体间的泥质披覆夹层为主要的夹层类型。(4)前缘近端分流河道水流强度较大,下切作用较强,所携带沉积物较多;下伏河口坝互相叠置切割,形成连片分布的复合体;单个河口坝由多个前积增生体构成,前积倾角约3.5°,增生体内的漫溢夹层及增生体间的泥质披覆夹层为主要夹层类型。 相似文献
12.
Noel P. James Yvonne Bone† T. Kurtis Kyser George R. Dix‡ Lindsay B. Collins§ 《Sedimentology》2004,51(6):1179-1205
The North West Shelf is an ocean‐facing carbonate ramp that lies in a warm‐water setting adjacent to an arid hinterland of moderate to low relief. The sea floor is strongly affected by cyclonic storms, long‐period swells and large internal tides, resulting in preferentially accumulating coarse‐grained sediments. Circulation is dominated by the south‐flowing, low‐salinity Leeuwin Current, upwelling associated with the Indian Ocean Gyre, seaward‐flowing saline bottom waters generated by seasonal evaporation, and flashy fluvial discharge. Sediments are palimpsest, a variable mixture of relict, stranded and Holocene grains. Relict intraclasts, both skeletal and lithic, interpreted as having formed during sea‐level highstands of Marine Isotope Stages (MIS) 3 and 4, are now localized to the mid‐ramp. The most conspicuous stranded particles are ooids and peloids, which 14C dating shows formed at 15·4–12·7 Ka, in somewhat saline waters during initial stages of post‐Last Glacial Maximum (LGM) sea‐level rise. It appears that initiation of Leeuwin Current flow with its relatively less saline, but oceanic waters arrested ooid formation such that subsequent benthic Holocene sediment is principally biofragmental, with sedimentation localized to the inner ramp and a ridge of planktic foraminifera offshore. Inner‐ramp deposits are a mixture of heterozoan and photozoan elements. Depositional facies reflect episodic environmental perturbation by riverine‐derived sediments and nutrients, resulting in a mixed habitat of oligotrophic (coral reefs and large benthic foraminifera) and mesotrophic (macroalgae and bryozoans) indicators. Holocene mid‐ramp sediment is heterozoan in character, but sparse, most probably because of the periodic seaward flow of saline bottom waters generated by coastal evaporation. Holocene outer‐ramp sediment is mainly pelagic, veneering shallow‐water sediments of Marine Isotope Stage 2, including LGM deposits. Phosphate accumulations at ≈ 200 m water depth suggest periodic upwelling or Fe‐redox pumping, whereas enhanced near‐surface productivity, probably associated with the interaction between the Leeuwin Current and Indian Ocean surface water, results in a linear ridge of pelagic sediment at ≈ 140 m water depth. This ramp depositional system in an arid climate has important applications for the geological record: inner‐ramp sediments can contain important heterozoan elements, mid‐ramp sediments with bedforms created by internal tides can form in water depths exceeding 50 m, saline outflow can arrest or dramatically slow mid‐ramp sedimentation mimicking maximum flooding intervals, and outer‐ramp planktic productivity can generate locally important fine‐grained carbonate sediment bodies. Changing oceanography during sea‐level rise can profoundly affect sediment composition, sedimentation rate and packaging. 相似文献
13.
P. T. Harris 《Australian Journal of Earth Sciences》2013,60(3):241-254
Surficial deposits of the tidally influenced Australian shelf seas exhibit a variation in fades related to energy gradient. These deposits comprise a high energy gravelly facies, a mobile sand sheet facies and a low energy muddy sand facies. Such a facies distribution conforms generally with the existing model of continental shelf tidal sedimentation, derived for the west European tidal seas. However, the carbonate rich and mainly warm water deposits of the Australian shelf differ from the mainly quartzose and temperate cold‐water deposits of the European type case in terms of: (i) the role of seagrasses in trapping fine‐grained sediment; and (ii) the relative importance of the production of carbonate mud by mechanical erosion of carbonate grains. Seagrasses in Spencer Gulf, Gulf of St Vincent and Torres Strait are located in regions of strong tidal currents, associated with bedforms and gravel lag deposits. Thus, in the case of tropical carbonate shelves, seagrass deposits containing fine‐grained and poorly sorted sediments are located in close proximity to high energy gravel and mobile sand facies. In contrast, the European model (for temperate, siliciclastic shelves) places facies in a regional gradient with a wide separation (in the order of 50–100 km). Of the locations reviewed, the Gulf of St Vincent, Bass Strait, southern Great Barrier Reef, Torres Strait and Gulf of Carpentaria exhibit zones of carbonate mud accumulation. The production and winnowing of carbonate mud from the mobile sand facies is a factor that must be taken into account in the assessment of a sediment budget for this facies, and which is of relatively greater importance for carbonate shelves. Insufficient data are presently available from the macrotidal North West Shelf to test the applicability of the model to this region. 相似文献
14.
Siliciclastic and volcaniclastic influences on equatorial carbonates: insights from the Neogene of Indonesia 总被引：5，自引：0，他引：5
ABSTRACT In active tectonic areas of humid equatorial regions, nearshore shallow‐water environments are commonly sites of near‐continuous siliciclastic influx and/or punctuated volcaniclastic input. Despite significant clastic influence, Neogene carbonates developed in SE Asia adjacent to major deltas or volcanic arcs, and are comparable with modern mixed carbonate–clastic deposits in the region. Research into delta‐front patch reefs from Borneo and fore‐arc carbonate platform development from Java is described and used to evaluate the effects of siliciclastic and volcaniclastic influx on regional carbonate sedimentation, local changes in carbonate‐producing biota and sequence development. Regional carbonate development in areas of high siliciclastic or volcaniclastic input was influenced by the presence of antecedent highs, changes in the amounts or rates of clastic input, delta lobe switching or variations in volcanic activity, energy regimes and relative sea‐level change. A variety of carbonate‐producing organisms, including larger benthic foraminifera, some corals, coralline algae, echinoderms and molluscs could tolerate near‐continuous siliciclastic or volcaniclastic influx approximately equal to their own production rates. These organisms adopted various ‘strategies’ for coping with clastic input, including a degree of mobility, morphologies adapted to unstable substrate inhabitation or shedding sediment, and shapes adapted to low light levels. Local carbonate production was also affected by energy regime, clastic grain sizes and associated nutrient input. Clastic input influenced the inhabitable depth range for photoautotrophs, the zonation of light‐dependent assemblages and the morphology and sequence development of mixed carbonate–clastic successions. This study provides data on the dynamic interactions between carbonate and non‐carbonate clastic sediments and, when combined with information from comparable modern environments, allows a better understanding of the effects of siliciclastic and volcaniclastic influx on carbonate production. 相似文献
15.
16.
Claire E. Reymond Konny‐Sebastian Zihrul Jochen Halfar Bernhard Riegl Alexander Humphreys Hildegard Westphal 《Sedimentology》2016,63(4):940-958
Strongly influenced by seasonal and interannual (i.e. El Niño‐Southern Oscillation) upwelling, the equatorial setting of the Galápagos Archipelago is divided into well‐defined temperature, nutrient and calcium carbonate saturation (Ωaragonite) regions. To understand the relationship between oceanographic properties and sediment grain associations, grain size, carbonate content and components from sea floor surface samples were analysed, representing the main geographical regions of the Galápagos Archipelago. The shallow‐water rocky reefs of the Galápagos Archipelago are characterized by mixed carbonate–siliciclastic slightly gravelly sands. Despite minor differences in carbonate content, major differences exist in the distribution and composition of key carbonate producing biota. Halimeda is absent and benthic foraminifera occur in extremely low abundance. The western side of the Galápagos Archipelago is strongly influenced by nutrient‐rich, low‐Ωaragonite, subtropical water, which generates a heterozoan carbonate biofacies in a tropical realm resembling cold‐water counterparts (i.e. serpulid, echinoderm, gastropod, barnacle and bryozoan‐rich facies). The Central East region is composed of a transitional‐heterozoan biofacies. Biofacies observed in the northern region have an increased occurrence of tropical corals, albeit with a minor overall contribution to the carbonate components. Although the temperature gradient would allow for a broader distribution of photozoan biofacies, the increased nutrient concentration and related reduced light penetration from the upwelled waters favour heterozoan carbonate factories, mimicking cool‐water, deeper or higher latitude environments. The recent sedimentary record of the Galápagos Archipelago presents a range of tropical heterozoan carbonate communities, responding to more than simply latitude or temperature but a much more complex mixture of physical, evolutionary and geological processes. 相似文献
17.
根据岩石沉积类型、物源供给、成因机制和沉积序列 ,结合区域地质特征 ,将兰坪盆地三叠系划分为陆相火山泥石流、河流相、三角洲相、潮坪相、浅海陆棚相、碳酸盐台地相和深水盆地相7种主要沉积类型。通过对沉积相的详细分析 ,恢复其古地理格架和面貌 ,探讨岩相古地理的变迁历史 ,从而表明三叠纪早期到晚期 ,其古地理经历了陆相环境→碎屑海盆→碳酸盐海盆到碎屑海盆的转换 ,即两次海侵 海退旋回。早期的海域分布范围较小 ,晚期的海域分布范围较宽 ,并成为统一的海盆。 相似文献
18.
Duncan M. Fitzgerald Mark Kulp† Shea Penland† James Flocks‡ Jack Kindinger‡ 《Sedimentology》2004,51(6):1157-1178
The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea‐level rise (1·03 cm year?1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km2 since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross‐sections and prograding ebb‐tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2·2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb‐tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey‐brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75–100%) compared with the distal delta sediments (60–80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb‐tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb‐tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb‐tidal delta lithosome is presently no more than 5 m thick and is generally only 2–3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine‐grained sedimentation seaward of the inlets and the encasement of the ebb‐tidal delta lithosome in mud. The ebb‐tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand‐rich coasts by their muddy content and lack of large‐scale stratification produced by channel cut‐and‐fills and bar migration. 相似文献
19.
The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence. 相似文献
20.
The Feos Formation of the Nijar Basin comprises sediments deposited during the final stage of the Messinian salinity crisis when the Mediterranean was almost totally isolated. Levels of soft‐sediment deformation structures occur in both conglomeratic alluvial sediments deposited close to faults and the hyposaline Lago Mare facies, a laminated and thin‐bedded succession of whitish chalky marls and intercalated sands alternating with non‐marine coastal plain deposits. Deformation structures in the coarse clastics include funnel‐shaped depressions filled with conglomerate, liquefaction dykes terminating downwards in gravel pockets, soft‐sediment mixing bodies, chaotic intervals and flame structures. Evidence for soft‐sediment deformation in the fine‐grained Lago Mare facies comprises syndepositional faulting and fault‐grading, sandstone dykes, mixed layers, slumping and sliding of sandstone beds, convolute bedding, and pillar and flame structures. The soft‐sediment deformed intervals resemble those ascribed elsewhere to seismic shaking. Moreover, the study area provides the appropriate conditions for the preservation of deformation structures induced by seismicity; such as location in a tectonically active area, variable sediment input to produce heterolithic deposits and an absence of bioturbation. The vertical distribution of soft‐sediment deformation implies frequent seismic shocks, underlining the importance of seismicity in the Betic region during the Late Messinian when the Nijar Basin became separated from the Sorbas Basin to the north. The presence of liquefied gravel injections in the marginal facies indicates strong earthquakes (M ≥ 7). The identification of at least four separate fissured levels within a single Lago Mare interval suggests a recurrence interval for large magnitude earthquakes of the order of millennia, assuming that the cyclicity of the alternating Lago Mare and continental intervals was precession‐controlled. This suggestion is consistent with the present‐day seismic activity in SE Spain. 相似文献