首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Cenozoic-age metamorphic structure of the Alps consists of a throughgoing pressure-dominated belt (blueschists and eclogites) that strikes parallel to the orogen and was later truncated by two thermal domes characterised by Barrow-type metamorphism (Lepontine dome and Tauern window). This study documents for the first time that relics of Fe-Mg carpholite occur also within meta-sedimentary units that are part of the north-eastern Lepontine structural and metamorphic dome, where so far exclusively Barrovian assemblages were found. They occur in meta-sediments of both Valais Oceanderived Lower Penninic Bündnerschiefer and structurally lower Europe-derived Sub-Penninic cover nappes and slices. These high-pressure units were subsequently overprinted by a thermal event, as is documented by the growth of new minerals typical for Barrovian metamorphism.We present evidence for a two-stage metamorphic evolution in the northern part of the Lepontine dome: (1) Early subduction-related syn-D1 (Safien phase) HP/LT metamorphism under blueschist facies conditions (350–400 °C and 1.2–1.4 GPa) was immediately followed by “cold” isothermal (or cooling) decompression during D2 nappe-stacking (Ferrera phase). (2) Collisionrelated Barrovian overprint (500–570 °C and 0.5–0.8 GPa) postdates the D3 nappe-refolding event (Domleschg phase) and represents a late heating pulse, separated by D2 and D3 from the D1 high-pressure event. It occurred before and/or during the initial stages of D4 (Chiéra phase) representing a second nappe-refolding event.In discussing possible heat sources for the late Barrow-type heating pulse it is argued that heat release from radioactive decay of accreted material may play an important role in contributing much to heat production. Based on the field evidence, we conclude that heat transfer was essentially conductive during these latest stages of the thermal evolution.  相似文献   

2.
Thermal models for Barrovian metamorphism driven by doubling the thickness of the radiogenic crust typically meet difficulty in accounting for the observed peak metamorphic temperature conditions. This difficulty suggests that there is an additional component in the thermal budget of many collisional orogens. Theoretical and geological considerations suggest that viscous heating is a cumulative process that may explain the heat deficit in collision orogens. The results of 2D numerical modelling of continental collision involving subduction of the lithospheric mantle demonstrate that geologically plausible stresses and strain rates may result in orogen‐scale viscous heat production of 0.1 to >1 μW m?3, which is comparable to or even exceeds bulk radiogenic heat production within the crust. Thermally induced buoyancy is responsible for crustal upwelling in large domes with metamorphic temperatures up to 200 °C higher than regional background temperatures. Heat is mostly generated within the uppermost mantle, because of large stresses in the highly viscous rocks deforming there. This thermal energy may be transferred to the overlying crust either in the form of enhanced heat flow, or through magmatism that brings heat into the crust advectively. The amplitude of orogenic heating varies with time, with both the amplitude and time‐span depending strongly on the coupling between heat production, viscosity and collision strain rate. It is argued that geologically relevant figures are applicable to metamorphic domes such as the Lepontine Dome in the Central Alps. We conclude that deformation‐generated viscous dissipation is an important heat source during collisional orogeny and that high metamorphic temperatures as in Barrovian type metamorphism are inherent to deforming crustal regions.  相似文献   

3.
The Peripheral Schieferhülle of the Tauern Window of the Eastern Alps represents post-Hercynian Penninic cover sequences and preserves a record of metamorphism in the Alpine orogeny, without the inherited remnants of Hercynian events that are retained in basement rocks. The temperature-time-deformation history of rocks at the lower levels of these cover sequences have been investigated by geochronological and petrographic study of units whose P-T evolution and structural setting are already well understood. The Eclogite Zone of the central Tauern formed from protoliths with Penninic cover affinities, and suffered early Alpine eclogite facies metamorphism before tectonic interposition between basement and cover. It then shared a common metamorphic history with these units, experiencing blueschist facies and subsequent greenschist facies conditions in the Alpine orogeny. The greenschist facies phase, associated with penetrative deformation in the cover and the influx of aqueous fluids, reset Sr isotopes in metasediments throughout the eclogite zone and cover schists, recording deformation and peak metamorphism at 28-30 Ma. The Peripheral Schieferhülle of the south-east Tauern Window yields Rb-Sr white mica ages which can be tied to the structural evolution of the metamorphic pile. Early prograde fabrics pre-date 31 Ma, and were reworked by the formation of the large north-east vergent Sonnblick fold structure at 28 Ma. Peak metamorphism post-dated this deformation, but by contrast to the equivalent levels in the central Tauern, peak metamorphic conditions did not lead to widespread homogenization of the Sr isotopes. Localized deformation continued into the cooling path until at least 23 Ma, partially or wholly resetting Sr white mica ages in some samples. These isotopic ages may be integrated with structural data in regional tectonic models, and may constrain changes in the style of crustal deformation and plate interaction. However, such interpretations must accommodate the demonstrable variation in thermal histories over small distances.  相似文献   

4.
关于巴罗式变质带的最新研究及其对研究秦岭杂岩的意义   总被引：1，自引：1，他引：0  
任留东  李崇  王彦斌  李淼 《岩石学报》2018,34(4):913-924
本文对苏格兰高地Grampian造山运动中产生的经典巴罗变质带进行了讨论,重点介绍了近年来关于其变质作用的特征及发生机制认识方面的重大变化。强调巴罗变质作用仅发生在整个造山运动过程中的部分时段,纪录了短暂的加热过程,时空上与区域内大规模的双峰式岩浆活动有关。经典的巴罗变质系列并非形成于地壳增厚及其热弛豫,而是代表了中地壳内大规模的接触变质作用。参考经典地区的变质特征,对发育巴罗式变质作用的秦岭杂岩进行了初步对比分析,指出其中与夕线石有关的变质P-T-t轨迹可能是等压冷却过程,而不是等温降压的顺时针演化模式。秦岭杂岩的变质作用时间仍需要进一步准确厘定。结合其它相关地质特征的分析和对比,得出如下推论:巴罗式变质带发育地区的变质作用、混合岩与花岗岩均属于同一动力系统作用的结果,花岗质岩体不是变质作用的原因;基性岩浆可能提供了巴罗式变质作用发生所需要的热能,但不是必要条件;巴罗式变质作用可以发生在正常地壳厚度情况下,不是碰撞构造的标志;伴随热异常的变形过程中产生了变质带的梯度分布(巴罗式变质带)和一些花岗岩,形成类似于底辟的冲起构造。  相似文献   

5.
Metamorphic terranes comprised of blueschist facies and regional metamorphic (Barrovian) rocks in apparent structural continuity may represent subduction complexes that were partially overprinted during syn‐ to post‐subduction heating or may be comprised of unrelated tectonic slices. An excellent example of a composite blueschist‐to‐Barrovian terrane is the southern Sivrihisar Massif, Turkey. Late Cretaceous blueschist facies rocks are dominated by marble characterized by rod‐shaped calcite pseudomorphs after aragonite and interlayered with blueschist that contains eclogite and quartzite pods. Barrovian rocks, which have 40Ar/39Ar white mica ages that are >20 Myr younger than those of the blueschists, are also dominated by marble, but rod‐shaped calcite has been progressively recrystallized into massive marble within a ～200‐m transition zone. Barrovian marble is interlayered with quartzite and schist in which isograds are closely spaced and metamorphic conditions range from chlorite to sillimanite zone over ～1 km present‐day structural thickness. Andalusite, kyanite and prismatic sillimanite are present in muscovite‐rich quartzite; in one location, all three are in the same rock. Andalusite pre‐dates Barrovian metamorphism, kyanite is both pre‐ and syn‐Barrovian and sillimanite is entirely Barrovian. Muscovite with phengitic cores and relict kyanite in quartzite below the staurolite‐in isograd are evidence for pre‐Barrovian subduction metamorphism preserved at the low‐T end of the Barrovian domain; above the staurolite isograd, all evidence for subduction metamorphism has been erased. Some regional metamorphism may have occurred during exhumation, as indicated by syn‐kinematic high‐T minerals defining the fabric of L‐tectonite. Quartz microstructures in lineated quartzite reveal a strong constrictional fabric that may have formed in a transtensional bend in the plate boundary. Transtension accounts for the closely spaced isograds and development of a strong constrictional fabric during exhumation.  相似文献   

6.
桐柏-大别山区高压变质相的构造配置   总被引：18，自引：3，他引：15  
作为华北和扬子陆块间的碰撞造山带桐柏大别山区以发育高压、超高压变质带为特征,从南到北变质相从低级到高级,代表俯冲带深度不同的变质产物,整体形成高压变质相系列。不过现今各变质相岩石的分布极受后期地壳规模的伸展构造控制,大别杂岩的穹隆作用更使高压变质相带的空间分布复杂化。超高压变质岩今日多呈大小不等的块体嵌布于相对低压的大别杂岩之内,造山带根部物质的热软化,使许多深层地幔物质得以像挤牙膏一样挤出于大别杂岩内。它们之中广泛发育着减压退变质的显微结构,与大别杂岩内一些麻粒岩相表壳岩所保存的减压退变质证迹一样,同是挤出作用和碰撞后隆升的构造证迹。高压相系的发育使南桐柏山和大别山迥然不同于桐商（ 商丹） 断裂以北的北秦岭北淮阳变质带。新近发表的同位素年代学（４０Ａｒ ３９ Ａｒ） 资料：３１６ ～４３４ Ｍａ ,已证明北秦岭是古生代变质带,它与桐柏－ 大别印支期碰撞造山带差异甚大。这两个变质地温梯度差异甚大的变质地体的拼合,说明华北和扬子陆块碰撞的主缝合带是商丹－ 桐商断裂带  相似文献   

7.
Abstract

The western margin of the Tauera Window (Eastern Alps) is defined by a low angle westward dipping fault zone of potently We disp lacement. Ductile deformation of the fault rocks results in a carpet of mylonites up to 400 metres thick. Evidence from shear criteria and the excision of part of the Cretaceous-Tertiary metamorphic edifice both indicate normal displacements, and relative movement of Austroalpine nappe complex towards the west. The Sterzing-Steinach mylonite zone overprints the Alpine nappe edifice. Movements occurred on the cooling path of the Tauern metamorphism, and may be as recent as Middle Miocene.

The Kinematics and geometry of the mylonite zone constrain two likely t ectonic explanations that are both compatible with secondary thining of a thick orogenic wedge. (1) Ute the Austroalpine nappe pile due to tectonic unroofing of the Tauern window. (2) Continental escape by east-west stretching of the Alpine orogenic wedge in response to continental collision.  相似文献   

8.
The Western Sonobari Complex in northwestern Mexico consists of metamorphosed rocks mostly derived from Palaeozoic (?) sedimentary and Mesozoic igneous protoliths. Rocks of this complex display amphibolite facies orogenic metamorphism, pervasive foliation, migmatization, and four folding phases. These features are ascribed to a contractional tectonic event with NNW–SSE shortening direction, which caused thrusting, thickening of the crust, and sinking of the lithological units. U–Pb geochronology of migmatitic leucosome bands indicates that peak metamorphic conditions were reached between ~93 and 89 Ma. Post-tectonic Late Cretaceous peraluminous aplite-pegmatite dikes transect the metamorphic foliation. Traditional thermobarometry in the metamorphic rocks yields average pressures and temperatures of 9.0–7.1 kbar and 745–663°C, typical of intermediate P/T Barrovian metamorphism. On the basis of its age and contractional character, the thickening event originating the metamorphism may be related to collision of the Alisitos island arc against crustal blocks of Mexico. Thermobarometric data of post-tectonic intrusives including Late Cretaceous granodiorite and Eocene gabbro indicate emplacement within an overthickened crust, while P-T conditions of post-tectonic dikes point towards an almost isothermal decompression path along the amphibolite facies field. Rock units of similar age and metamorphic character are discontinuously exposed from the Islas Marias offshore the Nayarit coast to the Peninsular Ranges batholith of Baja California, and even extend north into the Sierra Nevada batholith and the Sevier hinterland. This extensive belt of Barrovian metamorphic rocks thus provides a record of middle Cretaceous shortening and crustal thickening related to arc-continent collision followed by subduction resuming.  相似文献   

9.
大别地区的变质作用及与碰撞造山过程的关系   总被引：3，自引：0，他引：3  
大别造山带从南到北可分为５个变质构造单元：扬子北缘蓝片岩带、突松变质杂岩带、南大虽碰撞杂岩带、北大别变质杂岩带和北淮阳变质带。各个变质构造单元中不同岩石的变质作用可划分为３种类型：（１）超高压型。以含柯石英（及金刚石）的榴辉岩为代表,仅见于南大别碰撞杂岩带中,这类岩石的ＰＴ轨迹反映洋壳Ｂ型俯冲的特点。（２）高压型。见于大别山南部的蓝片岩带、宿松变质杂岩带和南大别杂岩中的变质沉积岩及部分片麻岩中,与  相似文献   

10.
The transfer of fluid and elements from subducting crust to the overlying mantle wedge is a fundamental process affecting arc magmatism and the chemical differentiation of the Earth. While the production of fluid by breakdown of hydrous minerals is well understood, the liberation of trace elements remains generally unconstrained. In this paper, we evaluate the behaviour of trace elements during prograde metamorphism and dehydration using samples of high-pressure, low-temperature metamorphic rocks from New Caledonia. Samples examined include mafic and pelitic rock-types that range in grade from lawsonite blueschist to eclogite facies, and represent typical lithologies of subducting crust. Under lawsonite blueschist facies conditions, the low temperatures of metamorphism inhibit equilibrium partitioning between metamorphic minerals and allow for the persistence of igneous and detrital minerals. Despite this, the most important hosts for trace-elements include lawsonite, (REE, Pb, Sr), titanite (REE, Nb, Ta), allanite (LREE, U, Th), phengite (LILE) and zircon (Zr, Hf). At epidote blueschist to eclogite facies conditions, trace-element equilibrium may be attained and epidote (REE, Sr, Th, U, Pb), garnet (HREE), rutile (Nb, Ta), phengite (LILE) and zircon (Zr, Hf) are the major trace-element hosts. Chlorite, albite, amphibole and omphacite contain very low concentrations of the investigated trace elements. The comparison of mineral trace-element data and bulk-rock data at different metamorphic grades indicates that trace elements are not liberated in significant quantities by prograde metamorphism up to eclogite facies. Combining our mineral trace-element data with established phase equilibria, we show that the trace elements considered are retained by newly-formed major and accessory minerals during mineral breakdown reactions to depths of up to 150 km. In contrast, significant volumes of fluid are released by dehydration reactions. Therefore, there is a decoupling of fluid release and trace element release in subducting slabs. We suggest that the flux of trace elements from the slab is not simply linked to mineral breakdown, but results from complex fluid-rock interactions and fluid-assisted partial melting in the slab.Electronic Supplementary Material Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00410-003-0495-5.Editorial responsibility: J. Hoefs  相似文献   

11.
During Hercynian low-pressure/high-temperature metamorphism of Palaeozoic metasediments of the southern Aspromonte (Calabria), a sequence of metamorphic zones at chlorite, biotite, garnet, staurolite–andalusite and sillimanite–muscovite grade was developed. These metasediments represent the upper part of an exposed tilted cross-section through the Hercynian continental crust. P–T information on their metamorphism supplements that already known for the granulite facies lower crust of the section and allows reconstruction of the thermal conditions in the Calabrian crust during the late Hercynian orogenic event. Three foliations formed during deformation of the metasediments. The peak metamorphic assemblages grew mainly syntectonically (S2) during regional metamorphism, but mineral growth outlasted the deformation. This is in accordance with the textural relationships found in the lower part of the same crustal section exposed in the northern Serre. Pressure conditions recorded for the base of the upper crustal metasediments are c. 2.5 kbar and estimated temperatures range from <350 °C in the chlorite zone, increasing to 500 °C in the lower garnet zone, and reaching 620 °C in the sillimanite–muscovite zone. Geothermal gradients for the peak of metamorphism indicate a much higher value for the upper crust (c. 60 °C km?1) than for the granulite facies lower crust (30–35 °C km?1). The small temperature difference between the base of the upper crust (620 °C at c. 2.5 kbar) and the top of the lower crust (690 °C at 5.5 kbar) can be explained by intrusions of granitoids into the middle crust, which, in this crustal section, took place synchronously with the regional metamorphism at c. 310– 295 Ma. It is concluded that the thermal structure of the Calabrian crust during the Hercynian orogeny – as it is reflected by peak metamorphic assemblages – was mainly controlled by advective heat input through magmatic intrusions into all levels of the crust.  相似文献   

12.
Effect of metamorphic reactions on thermal evolution in collisional orogens   总被引：1，自引：0，他引：1  
The effects of metamorphic reactions on the thermal structure of a collisional overthrust setting are examined via forward numerical modelling. The 2D model is used to explore feedbacks between the thermal structure and exhumation history of a collisional terrane and the metamorphic reaction progress. The results for average values of crustal and mantle heat production in a model with metapelitic crust composition predict a 25–40 °C decrease in metamorphic peak temperatures due to dehydration reactions; the maximum difference between the P–T–t paths of reacting and non‐reacting rocks is 35–45 °C. The timing of the thermal peak is delayed by 2–4 Myr, whereas pressure at peak temperature conditions is decreased by more than 0.2 GPa. The changes in temperature and pressure caused by reaction may lead to considerable differences in prograde reaction pathways; the consumption of heat during dehydration may produce greenschist facies mineral assemblages in rocks that would have otherwise attained amphibolite facies conditions in the absence of reaction enthalpy. The above effects, although significant, are produced by relatively limited metamorphic reaction which liberates only half of the water available for dehydration over the lifetime of the prograde metamorphism. The limited reaction is due to the lack of heat in a model with the average thermal structure and relatively fast erosion, a common outcome in the numerical modelling of Barrovian metamorphism. This problem is typically resolved by invoking additional heat sources, such as high radiogenic heat production, elevated mantle heating or magmatism. Several models are tested that incorporate additional radiogenic heat sources; the elevated heating rates lead to stronger reaction and correspondingly larger thermal effects of metamorphism. The drop in peak temperatures may exceed 45 °C, the maximum temperature differences between the reacting and non‐reacting P–T–t paths may reach 60 °C, and pressure at peak temperature conditions is decreased by more than 0.2 GPa. Field observations suggest that devolatilization of metacarbonate rocks can also exert controls on metamorphic temperatures. Enthalpies were calculated for the reaction progress recorded by metacarbonate rocks in Vermont, and were used in models that include a layer of mixed metapelite–metacarbonate composition. A model with the average thermal structure and erosion rate of 1 mm year?1 can provide only half of the heat required to drive decarbonation reactions in a 10 km thick mid‐crustal layer containing 50 wt% of metacarbonate rock. Models with elevated heating rates, on the other hand, facilitated intensive devolatilization of the metacarbonate‐bearing layer. The reactions resulted in considerable changes in the model P–T–t paths and ～60 °C drop in metamorphic peak temperatures. Our results suggest that metamorphic reactions can play an important role in the thermal evolution of collisional settings and are likely to noticeably affect metamorphic P–T–t paths, peak metamorphic conditions and crustal geotherms. Decarbonation reactions in metacarbonate rocks may lead to even larger effects than those observed for metapelitic rocks. Endothermic effects of prograde reactions may be especially important in collisional settings containing additional heat sources and thus may pose further challenges for the ‘missing heat’ problem of Barrovian metamorphism.  相似文献   

13.
Exposed cross‐sections of the continental crust are a unique geological situation for crustal evolution studies, providing the possibility of deciphering the time relationships between magmatic and metamorphic events at all levels of the crust. In the cross‐section of southern and northern Calabria, U–Pb, Rb–Sr and K–Ar mineral ages of granulite facies metapelitic migmatites, peraluminous granites and amphibolite facies upper crustal gneisses provide constraints on the late‐Hercynian peak metamorphism and granitoid magmatism as well as on the post‐metamorphic cooling. Monazite from upper crustal amphibolite facies paragneisses from southern Calabria yields similar U–Pb ages (295–293±4 Ma) to those of granulite facies metamorphism in the lower crust and of intrusions of calcalkaline and metaluminous granitoids in the middle crust (300±10 Ma). Monazite and xenotime from peraluminous granites in the middle to upper crust of the same crustal section provide slightly older intrusion ages of 303–302±0.6 Ma. Zircon from a mafic to intermediate sill in the lower crust yields a lower concordia intercept age of 290±2 Ma, which may be interpreted as the minimum age for metamorphism or intrusion. U–Pb monazite ages from granulite facies migmatites and peraluminous granites of the lower and middle crust from northern Calabria (Sila) also point to a near‐synchronism of peak metamorphism and intrusion at 304–300±0.4 Ma. At the end of the granulite facies metamorphism, the lower crustal rocks were uplifted into mid‐crustal levels (10–15 km) followed by nearly isobaric slow cooling (c. 3 °C Ma?1) as indicated by muscovite and biotite K–Ar and Rb–Sr data between 210±4 and 123±1 Ma. The thermal history is therefore similar to that of the lower crust of southern Calabria. In combination with previous petrological studies addressing metamorphic textures and P–T conditions of rocks from all crustal levels, the new geochronological results are used to suggest that the thermal evolution and heat distribution in the Calabrian crust were mainly controlled by advective heat input through magmatic intrusions into all crustal levels during the late‐Hercynian orogeny.  相似文献   

14.
New 40Ar/39Ar geochronology places time constraints on several stages of the evolution of the Penninic realm in the Eastern Alps. A 186±2 Ma age for seafloor hydrothermal metamorphic biotite from the Reckner Ophiolite Complex of the Pennine–Austroalpine transition suggests that Penninic ocean spreading occurred in the Eastern Alps as early as the Toarcian (late Early Jurassic). A 57±3 Ma amphibole from the Penninic subduction–accretion Rechnitz Complex dates high-pressure metamorphism and records a snapshot in the evolution of the Penninic accretionary wedge. High-pressure amphibole, phengite, and phengite+paragonite mixtures from the Penninic Eclogite Zone of the Tauern Window document exhumation through ≤15 kbar and >500 °C at 42 Ma to 10 kbar and 400 °C at 39 Ma. The Tauern Eclogite Zone pressure–temperature path shows isothermal decompression at mantle depths and rapid cooling in the crust, suggesting rapid exhumation. Assuming exhumation rates slower or equal to high-pressure–ultrahigh-pressure terrains in the Western Alps, Tauern Eclogite Zone peak pressures were reached not long before our high-pressure amphibole age, probably at ≤45 Ma, in accordance with dates from the Western Alps. A late-stage thermal overprint, common to the entire Penninic thrust system, occurred within the Tauern Eclogite Zone rocks at 35 Ma. The high-pressure peak and switch from burial to exhumation of the Tauern Eclogite Zone is likely to date slab breakoff in the Alpine orogen. This is in contrast to the long-lasting and foreland-propagating Franciscan-style subduction–accretion processes that are recorded in the Rechnitz Complex.  相似文献   

15.
 The highest grade of metamorphism and associated structural elements in orogenic belts may be inherited from earlier orogenic events. We illustrate this point using magmatic and metamorphic rocks from the southern steep belt of the Lepontine Gneiss Dome (Central Alps). The U-Pb zircon ages from an anatectic granite at Verampio and migmatites at Corcapolo and Lavertezzo yield 280–290 Ma, i.e., Hercynian ages. These ages indicate that the highest grade of metamorphism in several crystalline nappes of the Lepontine Gneiss Dome is pre-Alpine. Alpine metamorphism reached sufficiently high grade to reset the Rb-Sr and K-Ar systematics of mica and amphibole, but generally did not result in crustal melting, except in the steep belt to the north of the Insubric Line, where numerous 29 to 26 Ma old pegmatites and aplites had intruded syn- and post-kinematically into gneisses of the ductile Simplon Shear Zone. The emplacement age of these pegmatites gives a minimum estimate for the age of the Alpine metamorphic peak in the Monte Rosa nappe. The U-Pb titanite ages of 33 to 31 Ma from felsic porphyritic veins represent a minimum-age estimate for Alpine metamorphism in the Sesia Zone. A porphyric vein emplaced at 448±5 Ma (U-Pb monazite) demonstrates that there existed a consolidated Caledonian basement in the Sesia Zone. Received: 23 May 1995/Accepted: 12 October 1995  相似文献   

16.
文飞  田忠华 《岩石学报》2021,37(2):619-635
前寒武纪造山带解析是地球科学研究的重点。胶-辽-吉造山带作为华北克拉通最具代表性的造山带之一,是研究前寒武纪造山过程和物质折返的理想场所。本文以辽东半岛辽河群为研究对象,以变质变形为研究手段,系统解析胶-辽-吉造山带的造山及折返过程。含夕线石榴黑云片麻岩(样品18TZH49)位于造山带核心部分,其岩相学观察和相平衡模拟表明,其峰期和峰后变质阶段矿物组合分别为Sil+Grt+Pl+Bi+Qz+Ilm+Melt和St+Grt+Pl+Bi+Chl+Qz+Ilm,变质温压条件为720~780℃/5.9~6.9kbar和540~565℃/3~4.1kbar,从峰期到峰后记录了一个降温降压的顺时针P-T演化轨迹。锆石UPb年代学研究表明其退变质年龄为1851Ma。结合南、北辽河群其他变泥质岩研究工作,提出造山带北部北辽河群泥质岩经历低角闪岩相变质作用,以典型的巴罗式变质带为特征;造山带南部南辽河群经历角闪岩相至麻粒岩相变质作用,退变质特征明显。从构造角度来说,北辽河群受向北逆冲推覆构造影响,显示向龙岗基底的运动学特征;造山带核心部位的南、北辽河群直立褶皱发育,指示地壳强烈收缩过程;南辽河群受向南逆冲推覆构造影响,显示向南侧狼林陆块的运动学特征。变质变形及年代学共同指示,辽河群经历1.95~1.90Ga造山作用,构造增厚作用使不同类型岩石相互叠置并发生不同程度变质作用。随后,~1.85Ga发生造山后伸展作用,不同变质等级岩片剥露于地表。  相似文献   

17.
The exhumation of metamorphic domes within orogenic belts is exemplified by the Tauern window in the Eastern Alps. There, the exhumation is related to partitioning of final orogenic shortening into deep-seated thrusts, near-surface antiformal bending forming brachyanticlines, and almost orogen-parallel strike-slip faults due to oblique continental plate collision. Crustal thickening by formation of an antiformal stack within upper to middle crustal portions of the lower lithosphere is a prerequisite of late-stage orogenic window formation. Low-angle normal faults at releasing steps of crustal-scale strike-slip faults accomodate tectonic unloading of synchronously thickened crust and extension along strike of the orogen, forming pull-apart metamorphic domes. Initiation of low-angle normal faults is largely controlled by rock rheology, especially at the brittle-ductile transitional level within the lithosphere. Several mechanisms may contribute to uplift and exhumation of previously buried crust within such a setting: (1) Shortening along deep-seated blind thrusts results in the formation of brachyanticlines and bending of metamorphic isograds; (2) oversteps of strike-slip faults within the wrench zone control the final geometry of the window; (3) unloading by tectonic unroofing and erosional denudation; and (4) vertical extrusion of crustal scale wedges. Rapid decompression of previously buried crust results in nearly isothermal exhumation paths, and enhanced fluid circulation along subvertical tensile fractures (hydrothermal ore and silicate veins) that formed due to overall coaxial stretching of lower plate crust.  相似文献   

18.
《Tectonophysics》2001,330(1-2):1-23
The denudation budget of the Alps is quantified for the main period of lateral extrusion between 22 and 12 Ma. The relative importance of tectonic denudation increases from W to E from ∼70% in the Lepontine window in the Swiss Alps to ∼80% in the Tauern window and to more than 95% in the Rechnitz window. The driving mechanism of tectonic denudation was eastward extrusion due to an unconstrained orogenic margin in the Pannonian basin. Tectonic denudation in the Alps was responsible for about 30% of the total exhumation between 22 and 12 Ma.  相似文献   

19.
Abstract The Hercynian granitic basement which forms the Tenda Massif in NE Corsica represents part of the leading edge of the European Plate during middle-to-late Cretaceous (Eoalpine) high P metamorphism. The metamorphism of this basement, induced by the overthrusting of a blueschist facies (schistes lustrés) nappe, was confined to a major ductile shear zone (c. 1000m thick) within which deformation increases upwards towards the overlying nappe. Metamorphism within the basement mostly records lower blueschist facies conditions (crossite + epidote) except near the base of the shear zone where the greenschist facies assemblage albite + actinolitic amphibole has developed instead of crossite. Study of the primary mafic phase breakdown reactions within hornblende granodiorite reveals the following metamorphic zonation. Zone 1: biotite to chlorite. Towards zone 2: biotite to phengite. Zone 2: Hornblende to actinolitic Ca-amphibole + albite + sphene, and biotite to actinolitic Ca-amphibole + albite + phengite + Ti-ore + epidote. Zone 3: Hornblende to crossite + low Ti-biotite + phengite + sphene, and biotite to crossite + low Ti-biotite + phengite + Ti-ore + sphene ± epidote. P-T conditions at the base of the shear zone are estimated to have been 390-490°C at 600-900 M Pa (6-9kbar) and the Corsican basement is therefore deduced to have been buried to 20-30 km during metamorphism. This relatively shallow metamorphism contrasts with some other areas in the Western Alps where the Eoalpine event apparently buried the European continental crust to depths of 80 km or more. As there is no evidence for a long history of blueschist facies metamorphism prior to the involvement of the European continent, it is deduced that the Eoalpine blueschists were produced during the collision of the Insubric plate with Europe, rather than during Tethyan intraoceanic subduction. Coherent blueschist terrains such as the schistes lustres probably record buovant feature collision and obduction tectonics rather than any preceding oceanic subduction.  相似文献   

20.
The evolution of an active continental margin is simulated in two dimensions, using a finite difference thermomechanical code with half-staggered grid and marker-in-cell technique. The effect of mechanical properties, changing as a function of P and T, assigned to different crustal layers and mantle materials in the simple starting structure is discussed for a set of numerical models. For each model, representative P–T paths are displayed for selected markers. Both the intensity of subduction erosion and the size of the frontal accretionary wedge are strongly dependent on the rheology chosen for the overriding continental crust. Tectonically eroded upper and lower continental crust is carried down to form a broad orogenic wedge, intermingling with detached oceanic crust and sediments from the subducted plate and hydrated mantle material from the overriding plate. A small portion of the continental crust and trench sediments is carried further down into a narrow subduction channel, intermingling with oceanic crust and hydrated mantle material, and to some extent extruded to the rear of the orogenic wedge underplating the overriding continental crust. The exhumation rates for (ultra)high pressure rocks can exceed subduction and burial rates by a factor of 1.5–3, when forced return flow in the hanging wall portion of the self-organizing subduction channel is focused. The simulations suggest that a minimum rate of subduction is required for the formation of a subduction channel, because buoyancy forces may outweigh drag forces for slow subduction. For a weak upper continental crust, simulated by a high pore pressure coefficient in the brittle regime, the orogenic wedge and megascale melange reach a mid- to upper-crustal position within 10–20 Myr (after 400–600 km of subduction). For a strong upper crust, a continental lid persists over the entire time span covered by the simulation. The structural pattern is similar in all cases, with four zones from trench toward arc: (a) an accretionary complex of low-grade metamorphic sedimentary material; (b) a wedge of mainly continental crust, with medium-grade HP metamorphic overprint, wound up and stretched in a marble cake fashion to appear as nappes with alternating upper and lower crustal provenance, and minor oceanic or hydrated mantle interleaved material; (c) a megascale melange composed of high-pressure and ultrahigh-pressure metamorphic oceanic and continental crust, and hydrated mantle, all extruded from the subduction channel; (d) zone represents the upward tilted frontal part of the remaining upper plate lid in the case of a weak upper crust. The shape of the P–T paths and the time scales correspond to those typically recorded in orogenic belts. Comparison of the numerical results with the European Alps reveals some similarities in their gross structural and metamorphic pattern exposed after collision. A similar structure may be developed at depth beneath the forearc of the Andes, where the importance of subduction erosion is well documented, and where a strong upper crust forms a stable lid.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号