首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 296 毫秒
1.
The Early Permian Warchha Sandstone is well preserved in subsurface in the Potwar Basin and the Punjab Plain of Pakistan. However, this succession is only exposed in the Salt Range, and within this region, only a modest number of the many outcrops are of sufficient quality to enable the preparation of lateral and vertical log profiles. From the subsurface, data from five wells drilled in the Salt Range and Potwar Basin have been analysed. Although they are of restricted coverage, these subsurface data — which take the form of gamma ray logs and well cuttings — provide a valuable addition to the outcrop dataset of the Warchha Sandstone as they provide useful information about vertical textural changes, type and thickness of bedding and the nature of sandbody contacts with underlying strata. Overall, the Warchha Sandstone succession is composed of repeated fining-upwards cycles indicative of a meandering fluvial succession. Sub-components of each cycle are themselves classified into six subsurface sedimentary facies. Through comparison with outcropping parts of the succession, the origin and significance of these subsurface facies can be related to specific architectural elements within the meandering fluvial system responsible for generating the Warchha Sandstone succession.  相似文献   

2.
The Asmari Formation deposited in the Zagros foreland basin during the OligoceneMiocene. Lithologically, the Asmari Formation consists of limestone, dolomitic limestone, dolomite, argillaceous limestone, some anhydrite(Kalhur Member) and sandstones(Ahwaz Member). This study is based on the analysis of core samples from four subsurface sections(wells Mn-68, Mn-281, Mn-292 and Mn-312) in the Marun Oilfield in the Dezful embayment subzone in order to infer their provenance and tectonic setting of the Ahwaz Sandstone Member. Petrographical data reveal that the Ahwaz Sandstone comprises 97.5% quartz, 1.6% feldspar, and 0.9% rock fragments and all samples are classified as quartz arenites. The provenance and tectonic setting of the Ahwaz Sandstone have been assessed using integrated petrographic and geochemical studies. Petrographic analysis reveals that mono- and poly-crystalline quartz grains from metamorphic and igneous rocks of a craton interior setting were the dominant sources. Chemically, major and trace element concentrations in the rocks of the Ahwaz Sandstone indicate deposition in a passive continental margin setting. As indicated by the CIW′ index(chemical index of weathering) of the Ahwaz Sandstone(average value of 82) their source area underwent "intense" recycling but "moderate to high" degree of chemical weathering. The petrography and geochemistry results are consistent with a tropical, humid climate and low-relief highlands.  相似文献   

3.
The existing stratigraphic nomenclature applied to the Early and Middle Triassic Sherwood Sandstone Group in NW England has resulted from more than 150 years of geological investigation, but is characterized by a lithostratigraphic system that is insufficiently flexible to allow for variations in lithology and sedimentary facies within a continental depositional system. A revised well correlation based on the detrital mineralogical and chemical composition of the Ormskirk Sandstone Formation in four offshore wells, that is then extended to provide near‐basin‐wide well correlations using a regional shale marker, confirms previously suggested but unproven diachroneity at the top of the Sherwood Sandstone Group. It also reveals the presence of incised valleys filled by stacked amalgamated fluvial channel sandstones and cut into previously deposited aeolian and sandflat sequences as well as older fluvial channel sandstones. The combination of well correlations indicates that the valleys were incised by a fluvial system flowing NW from the Cheshire Basin into the East Irish Sea Basin and then west towards the Peel and Kish Bank basins. The stratal geometry of the upper part of the Sherwood Sandstone Group is suggested to conform to models of climatically mediated alternations of fluvial degradation and aggradation in response to changes in the relationship between sediment flux and stream discharge. This model is supported in the Sherwood Sandstone Group by climatically driven variations in the non‐channelized facies which record upward wetting and drying cycles that can be locally tied to fluvial incision surfaces, and suggest a hierarchy of at least three levels of climatic cyclicity recorded within the sedimentary succession. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

4.

Late Permian (early Tatarian, 258 Ma) palaeosols exposed near Kiama and Dapto on the south coast of New South Wales can be recognised from their red colour, clayey and massive texture, and clay‐filled root traces. Harvey pedotype palaeosols are within the upper Jamberoo Sandstone Member of the Broughton Formation. Loveleigh pedotype palaeosols are within the basal Kiama Sandstone overlying columnar jointed flows of the Blow Hole Latite Member of the Broughton Formation. Both kinds of palaeosols are strongly ferruginised with little relict bedding, yet they are little weathered and have surprisingly high amounts of feldspar and pyroxene. Both also show deformation of subsurface layers comparable to the active layer of permafrosted soils. Root traces in these palaeosols are sparse and comparable to those of woody gymnosperms, not chambered like the known roots of Glossopteris. Plausible components of the taiga woodland represented by the palaeosols include Gangamopteris, cordaites, seed ferns, and equisetaleans. Frigid palaeoclimatic indications from the palaeosols are compatible with a palaeomagnetically determined palaeolatitude of 57–85°S, and thus indicate an equator‐pole climatic gradient in the Late Permian generally similar to that of today.  相似文献   

5.
The continental Upper Triassic Tadrart Ouadou Sandstone Member was deposited in an extensional setting on the Pangaean continent, strongly influenced by a low‐latitude climatic regime (10° to 20° north). Complex interaction of basin subsidence and climatically driven processes led to high facies variability and a lack of correlatable units across the Argana Valley exposures. A process‐orientated approach integrating detailed facies with architectural element analysis was undertaken, which resulted in a multistage depositional model for the Tadrart Ouadou Sandstone Member. The basin‐scale model shows that basal alluvial fan and braided river systems are confined to the centre of the Argana Valley exposures. Aeolian deposits occur throughout the sequence, but dominate in the north. After a phase of playa deposition, prominent basin‐wide fluvial incision of up to 8 m marks the onset of perennial fluvial flow. These well‐sorted, internally complex and locally highly amalgamated fluvial sandstones are widespread throughout the basin and are focused in a north to south (south‐west) flowing channel system. After a final stage of aeolian sedimentation, sandstone deposition of the Tadrart Ouadou Sandstone Member in the Argana Valley is terminated rapidly by the onlap of lacustrine mudstones of the Sidi Mansour Member. The study revealed that, except for one pronounced period of perennial conditions, sedimentation is controlled largely by ephemeral fluvial flow, alternating ground water tables, deflation processes and periods with limited periodic local run‐off. The study highlights that facies architecture in the basin is the result of complex interaction of local syn‐sedimentary tectonics and the climatic regime within the basin, but also the climate of the catchment area to the east. The data suggest a proximal to mid‐distal basin setting in the rain‐shadow to the west of a mountain range (Massif Ancien), which exerted a strong control on the depositional environments of Triassic deposits exposed in this part of South‐west Morocco.  相似文献   

6.
This study examined the impacts of reservoir properties on carbon dioxide (CO2) migration after subsurface injection and evaluated the possibility of characterizing reservoir properties using CO2 monitoring data such as spatial–temporal distributions of gas pressure, which can be reasonably monitored in practice. The injection reservoir was assumed to be located 1,400–1,500 m below the ground surface such that CO2 remained in the supercritical state. The reservoir was assumed to contain layers with alternating conductive and resistive properties, which is analogous to actual geological formations such as the Mount Simon Sandstone unit. The CO2 injection simulation used a cylindrical grid setting in which the injection well was situated at the center of the domain, which extended out 8,000 m from the injection well. The CO2 migration was simulated using the latest version of the simulator, subsurface transport over multiple phases (the water–salt–CO2–energy module), developed by Pacific Northwest National Laboratory. A nonlinear parameter estimation and optimization modeling software package, Parameter ESTimation (PEST), is adopted for automated reservoir parameter estimation. The effects of data quality, data worth, and data redundancy were explored regarding the detectability of reservoir parameters using gas pressure monitoring data, by comparing PEST inversion results using data with different levels of noises, various numbers of monitoring wells and locations, and different data collection spacing and temporal sampling intervals. This study yielded insight into the use of CO2 monitoring data for reservoir characterization and how to design the monitoring system to optimize data worth and reduce data redundancy. The feasibility of using CO2 saturation data for improving reservoir characterization was also discussed.  相似文献   

7.
The Denizli Basin is a fault‐bounded Neogene–Quaternary depression located in the Western Anatolian Extensional Province, Western Turkey. The basin is a unique geological site with abundant active and fossil (Quaternary) travertine and tufa deposits. Fluid inclusion microthermometry and isotopic analysis were applied to study the genesis of the Ball?k fossil travertine deposits, located in the south‐eastern part of the basin. Microthermometry on fluid inclusions indicates that the main travertine precipitating and cementing fluids are characterized by low salinity (<0·7 wt% NaCl equivalent) and variable temperatures that cluster at <50°C and ca 100°C. Fluids of meteoric origin have been heated by migration to the deeper subsurface, possibly in a local high geothermal gradient setting. A later uncommon cementation phase is related to a fluid with a significantly higher salinity (25·5 to 26·0 wt% bulk). The fluid obtained its salinity by interaction with Late Triassic evaporite layers. Strontium isotopes indicate that the parent carbonate source rock of the different travertine precipitates is very likely to be the Triassic limestone of the Lycian Nappes. Carbon isotopes suggest that the parent CO2 gas originated from thermal decarbonation of the Lycian limestones with minor contributions of magmatic degassing and organic soil CO2. Oxygen isotopes confirm the meteoric origin of the fluids and indicate disequilibrium precipitation because of evaporation and degassing. Results were integrated within the available geological data of the Denizli Basin in a generalized travertine precipitation model, which enhanced the understanding of fossil travertine systems. The study highlights the novel application of fluid inclusion research in unravelling the genesis of continental carbonates and provides several recommendations for hydrocarbon exploration in travertine‐bearing sedimentary basins. The findings suggest that travertine bodies and their parent carbonate source rocks have the potential to constitute interesting subsurface hydrocarbon reservoirs.  相似文献   

8.
Marginal aeolian successions contain different lithological units with variable geometries, dimensions and spatial distributions. Such variations may result in considerable heterogeneity within hydrocarbon reservoirs developed in successions of this type, which poses a high risk to their efficient development. Here, such heterogeneity is described and characterized at inter‐well (<1 km) scales using two well‐exposed outcrop analogues of ‘end member’ marginal aeolian deposits from the Permian Cedar Mesa Sandstone and Jurassic Page Sandstone of south‐central Utah, USA. The sedimentology and stratigraphic architecture of the Cedar Mesa Sandstone was studied in a 1·2 km2 area in the Indian Creek region of southern Utah, where the interval consists of interbedded fluvial and aeolian deposits representative of a fluvial‐dominated erg margin. The Page Sandstone was studied in a 4·3 km2 area near Escalante, close to the Utah‐Arizona border, where it consists of interbedded sabkha and aeolian deposits representative of a transitional‐marine erg margin. The three‐dimensional stratigraphic architectures of both reservoir analogues have been characterized, in order to establish the dimensions, geometries and connectivity of high‐permeability aeolian sandstones. Facies architecture of the aeolian‐sabkha deposits is characterized by laterally continuous aeolian sandstone layers of relatively uniform thickness that alternate with layers of heterolithic sabkha deposits. Aeolian sandstones are thus likely to form vertically unconnected but laterally widespread flow units in analogous reservoirs. Facies architecture in the aeolian‐fluvial deposits is more complex, because it contains alternating intervals of aeolian sandstone and fluvial heterolithic strata, both of which may be laterally discontinuous at the studied length‐scales. Aeolian sandstones encased by fluvial heterolithic strata may form small, isolated flow units in analogous reservoirs, although the limited continuity of fluvial heterolithic strata results in vertical connectivity between successive aeolian sandstones in other locations. These architectural templates may be used to condition zonation schemes in models of marginal aeolian reservoirs.  相似文献   

9.
The Tawil Sandstone (Lower Devonian) in Central Saudi Arabia overlies the Sharwara Member of the Tayyarat Formation (Silurian) and succeeded conformly by the Shaiba Member of the Jauf Formation. Petrographical data reveal that the Tawil Sandstone comprises 96% quartz, 3% feldspar, and 1% rock fragments and all samples are classified as quartz arenites. The presence of well sorted, altered to fresh feldspar, and discriminate function analysis suggests that the sediments have been subjected to substartial reworking resulting in a high level of maturity. Modal analysis data (Q–F–L) suggest a stable cratonic provenance for the sediments and accumulation in a passive margin basin is indicated (binary plot of SiO2 vs K2O/Na2O). Diagenetic features include dissolution of feldspar and rock fragments, compaction, reduction of the existing pore space through rearrangements, and rotation and fragmentation of grains resulting in dissolution of quartz grains and cementation.  相似文献   

10.
The age of formation of the Lapstone Monocline has been long considered to be late Pliocene/early Pleistocene (the Kosciusko Uplift) but it is now generally thought to be much older. Palaeomagnetic data from haematite‐rich beds within the Hawkesbury Sandstone on and about the monocline indicate that it formed before the oldest haematite was introduced to these beds. The age of this oldest haematite is 15 ± 7 Ma. On the basis of these data, the age of the monocline is unlikely to be less than 8 Ma, probably exceeds 15 Ma, and could be older than 22 Ma.  相似文献   

11.
The Djado Basin (Niger) was located beneath the inner part of the Late Ordovician ice sheet. The Felar‐Felar Formation consists mainly of glaciomarine deposits, associated with the major ice sheet recession within the glaciation, and is bounded by two glacial unconformities. Structures corresponding to sandstone ridges are found within the Felar‐Felar Formation. Sandstone ridges are several metres high, about 10 m wide and hundreds of metres long. These structures are organized in extensive anastomosed to sub‐polygonal networks. The association of sandstone ridge networks with the later glacial unconformity and with other glacial evidence suggests sub‐glacial conditions for their origin. Sandstone ridge sedimentological characteristics indicate that sandstone ridges result from the scouring of the Felar‐Felar Formation by sub‐glacial, turbulent and pressurized meltwater; then sub‐glacial cavities were infilled with sand derived from glacial abrasion. Sandstone ridge networks are comparable with tunnel channels and document unusual drainage structures of the inner part of the palaeo‐ice sheet.  相似文献   

12.
Efforts to map the lithology and geometry of sand and gravel channel‐belts and valley‐fills are limited by an inability to easily obtain information about the shallow subsurface. Until recently, boreholes were the only method available to obtain this information; however, borehole programmes are costly, time consuming and always leave in doubt the stratigraphic connection between and beyond the boreholes. Although standard shallow geophysical techniques such as ground‐penetrating radar (GPR) and shallow seismic can rapidly obtain subsurface data with high horizontal resolution, they only function well under select conditions. Electrical resistivity ground imaging (ERGI) is a recently developed shallow geophysical technique that rapidly produces high‐resolution profiles of the shallow subsurface under most field conditions. ERGI uses measurements of the ground's resistance to an electrical current to develop a two‐dimensional model of the shallow subsurface (<200 m) called an ERGI profile. ERGI measurements work equally well in resistive sediments (‘clean’ sand and gravel) and in conductive sediments (silt and clay). This paper tests the effectiveness of ERGI in mapping the lithology and geometry of buried fluvial deposits. ERGI surveys are presented from two channel‐fills and two valley‐fills. ERGI profiles are compared with lithostratigraphic profiles from borehole logs, sediment cores, wireline logs or GPR. Depth, width and lithology of sand and gravel channel‐fills and adjacent sediments can be accurately detected and delineated from the ERGI profiles, even when buried beneath 1–20 m of silt/clay.  相似文献   

13.

The Savory Basin in central Western Australia was recognized in the mid‐1980s during regional mapping of very poorly exposed Proterozoic rocks previously assigned to the Bangemall Basin. All of the sedimentary rock units in the Savory Basin have been included in the Savory Group, which unconformably overlies the Mesoproterozoic Yeneena and Bangemall Groups. Correlation with adjacent basins is impeded by poor outcrop and the lack of subsurface information. Possible correlations have been investigated with the much better known Amadeus Basin to the east, and with the Officer Basin. Two correlations now clarify the age and relationships of the Savory Group. First, the Skates Hills Formation contains distinctive stromatolites previously recorded from the Bitter Springs Formation of the Amadeus Basin. In addition, the Skates Hills and Bitter Springs Formations have many lithological features in common. This correlation is strengthened by comparison with surface and subsurface units in the northern Officer Basin. Second, the intergrading sandstone‐diamictite of the Boondawari Formation is very similar to the intergrading Pioneer Sandstone‐Olympic Formation of the Amadeus Basin, and the overlying siltstone closely resembles the Pertatataka Formation and its correlative the Winnall beds. The stromatolitic and oolitic carbonates at the top of the Boondawari Formation are broadly comparable with those of the Julie Formation (which grades down into the Pertatataka Formation). Support for this set of correlations comes from carbon isotope chemostratigraphy. The stromatolites include two new forms described herein, Eleonora boondawarica and Acaciella savoryensis, together with a third form too poorly preserved to be formally defined. The age of the upper sandstones is unknown. The McFadden Formation seems to have its provenance in the Paterson Orogen. The southeastern extension of this orogen is the Musgrave Block, where compression followed by uplift at about 560–530 Ma (Peterman Ranges Orogeny) led to the formation of large amounts of conglomerate (Mt Currie Conglomerate) and sandstone (Arumbera Sandstone). If tectonic events in the Paterson Orogen were contemporaneous with those in the Musgrave Block, the McFadden Formation would correlate with the Arumbera Sandstone.  相似文献   

14.
The subsurface of the Irish Sea contains one of the United Kingdom's most important gas fields, the Morecambe Field, owned by British Gas. Approximately 10% of the UK's daily consumption of natural gas will be supplied by this giant accumulation trapped within fluvial deposits of the Lower Triassic Sherwood Sandstone Formation.  相似文献   

15.
Turbidite bed thickness distributions are often interpreted in terms of power laws, even when there are significant departures from a single straight line on a log–log exceedence probability plot. Alternatively, these distributions have been described by a lognormal mixture model. Statistical methods used to analyse and distinguish the two models (power law and lognormal mixture) are presented here. In addition, the shortcomings of some frequently applied techniques are discussed, using a new data set from the Tarcău Sandstone of the East Carpathians, Romania, and published data from the Marnoso‐Arenacea Formation of Italy. Log–log exceedence plots and least squares fitting by themselves are inappropriate tools for the analysis of bed thickness distributions; they must be accompanied by the assessment of other types of diagrams (cumulative probability, histogram of log‐transformed values, q–q plots) and the use of a measure of goodness‐of‐fit other than R2, such as the chi‐square or the Kolmogorov–Smirnov statistics. When interpreting data that do not follow a single straight line on a log–log exceedence plot, it is important to take into account that ‘segmented’ power laws are not simple mixtures of power law populations with arbitrary parameters. Although a simple model of flow confinement does result in segmented plots at the centre of a basin, the segmented shape of the exceedence curve breaks down as the sampling location moves away from the basin centre. The lognormal mixture model is a sedimentologically intuitive alternative to the power law distribution. The expectation–maximization algorithm can be used to estimate the parameters and thus to model lognormal bed thickness mixtures. Taking into account these observations, the bed thickness data from the Tarcău Sandstone are best described by a lognormal mixture model with two components. Compared with the Marnoso‐Arenacea Formation, in which bed thicknesses of thin beds have a larger variability than thicknesses of the thicker beds, the thinner‐bedded population of the Tarcău Sandstone has a lower variability than the thicker‐bedded population. Such differences might reflect contrasting depositional settings, such as the difference between channel levées and basin plains.  相似文献   

16.
《Sedimentology》2018,65(2):597-619
Fluvial channel‐belt clustering has recently been documented using quantitative metrics for systems dominated by autogenic controls. It has long been recognized that allogenic forcing (tectonic and eustatic controls) can lead to confinement of fluvial systems, resulting in clustering of channel belts. To date, no study has quantitatively documented the differences in channel‐belt clustering, compensational stacking of channel belts and interchannel‐belt connectivity in unconfined and confined systems. This study quantitatively compares world‐class outcrops of an unconfined fluvial system (Palaeocene lower Wasatch Formation) with outcrops of a confined fluvial system (Cretaceous Dakota Sandstone). Two new methods have been developed to quantitatively document channel‐belt clustering and intrachannel‐belt connectivity. These new methods, and other previously developed methods, are used to document an increase in channel‐belt clustering and intrachannel‐belt connectivity downdip in both systems. Additionally, it was found that channel belts within the unconfined system stack more compensationally than those in the confined system. These new methods and empirical relationships can be used for predicting intrachannel‐belt connectivity, and accurately modelling unconfined and confined fluvial systems in the subsurface.  相似文献   

17.
A petrographic investigation revealed polyphase quartz cementation in the Finefrau Sandstone (Upper Carboniferous, Western Germany) and the Solling Sandstone (Lower Triassic, Central Germany). Three different cements could be distinguished in each sandstone based on their cathodoluminescence and trace element composition. The first quartz generation is suggested to have been formed during eogenesis due to dissolution and replacement of feldspar. The mesogenetic paragenesis comprises two generations of quartz and illite, which are accompanied by albite in the Solling Sandstone. Sharp luminescence zoning in quartz overgrowths points to distinct episodes of cementation in both sandstones. Significant amounts of Al, Li and H and traces of Ge and B have been detected in the quartz overgrowths. The Al‐content of the quartz cements in the Finefrau Sandstones exceeds that in the quartz cements in the Solling Sandstone by a factor of five. It is suggested that this compositional variation reflects the conditions in the pore‐water, such as temperature and pH. The Al‐concentration is generally correlated to the Li‐content with the exception of the latest quartz generation in the Finefrau Sandstones which is also most enriched in trace elements. The ratio of Li/Al varies between 0·11 and 0·25 in the two sandstones. The Li/H‐ratio, which ranges from 0·12 to 0·3, is controlled by the activity ratio of Li and H in the pore fluid. Clay minerals are the most important source for Li and high salinities favour the mobilization of Li during diagenesis. Thus, a relatively low salinity and low pH are responsible for the low Li/H‐ratio in the Finefrau Sandstone, while high salinity and neutral to alkaline pH results in a high Li/H‐ratio for the Solling Sandstone. The Ge‐contents are generally near the average of detrital quartz and indicate that pressure dissolution is a major source for quartz cementation. Different chemical compositions of distinct quartz generations indicate changes in the physico‐chemical conditions and point to mobilization of silica from different sources (for example, pressure solution and clay mineral transformations).  相似文献   

18.
The Lefroy Goldfield in eastern Tasmania is anomalous in southeastern Australia because mineralised fault reefs (i.e. reefs that are also faults) strike in an easterly direction at a high angle to the predominantly northwest strike of bedding and folds. Gold mineralisation is of Early to Middle Devonian age, with reef formation coinciding with a third regionally compressive deformation event (D3), and a second phase of Tabberabberan orogenesis. Mineralised reefs are hosted by Mathinna Supergroup turbidites of Cambrian to Ordovician age and extend for up to 2 km across the boundary between the sandstone‐dominated Stony Head Sandstone and the shale‐dominated Turquoise Bluff Slate. Ore shoots in the reefs plunge moderately west and, in the Volunteer Mine, coincide with the intersection of the reef and a D1/D2 thrust contact. The subvertical orientation and discordant relationship of the mineralised reefs to bedding, as well as the lack of gold mineralisation along bedding and pre‐D3 structures, indicate that the reefs formed during a period of wrench faulting. In contrast to lode‐style deposits in Victoria, the far‐field minimum compressive stress at Lefroy during reef formation was not vertical but, rather, occupied a subhorizontal orientation.  相似文献   

19.
Examination with scanning electron microscopy (SEM) and scanning force microscopy (SFM) revealed etch pits, layers and islands on dolomite crystal faces synthesized from calcite in Ca‐Mg‐Cl solutions at 200 °C and a wide variety of natural dolomites. Layers are broad, flat structures bounded by steps less than 100 nm high and greater than 1 μm wide. Islands are rounded topographic highs <20 nm high and <200 nm wide. The nanotopography of synthetic dolomite changed from islands throughout most of the reaction to layers at 100% dolomite. Island nanotopography formed on both Ca‐rich and near‐stoichiometric dolomite. Analyses of reaction products from dolomite synthesis indicates that there are no SFM‐detectable products formed in <10 h. SEM‐detectable products formed in 15 h. X‐ray diffraction (XRD)‐detectable products formed in ≈18 h, and the reaction went to completion in ≈40 h. Based on SFM analyses, the induction period for dolomitization in these experiments accounts for ≈20% of the total reaction time necessary to dolomitize CaCO3 completely under the experimental conditions used here. Island nano‐ topography is inferred to occur at higher degrees of supersaturation than layer nanotopography for three reasons. First, island nanotopography on synthetic calcite and gypsum forms at higher supersaturations than layer nanotopography. Secondly, island nanotopography formed in solutions with higher degrees of supersaturation with respect to dolomite. Thirdly, the greater surface roughness of a crystal face composed of islands compared with layers indicates that island surfaces have higher surface energy than layer surfaces. Therefore, the stability of island surfaces requires a higher degree of supersaturation. Because islands and layers form under a wide range of conditions, their presence provides broadly applicable criteria for evaluating relative degrees of supersaturation under which ancient dolomite formed. Comparison of synthetic dolomites with natural dolomites demonstrates (1) similar nanotopography on natural and synthetic dolomites and (2) both natural planar and non‐planar dolomite may have island nanotopography.  相似文献   

20.

Lithofacies in the mid‐Permian Nowra Sandstone indicate a middle/upper shoreface to foreshore environment of deposition under the influence of storm‐generated waves and north‐northeasterly directed longshore currents. Palaeogeographic reconstruction for the Nowra Sandstone portrays a sand‐dominated high energy shelf and offshore shoal forming a sequence thickening seaward away from the western shore of the Sydney Basin. The shoal‐crest at the outer edge of the shelf trends north‐northeast. It is characterized by fine‐ to medium‐grained sandstone with upper flow regime structures and a high proportion of conglomerate, whereas coarser sandstone with lower energy bedforms occurs along the seaward side of the shoal. In the deeper water to the east, the lower Nowra Sandstone becomes rapidly thinner as it passes seaward, via bioturbated storm redeposited sandstone beds, into the shelf deposits of the Wandrawandian Siltstone. This sequence accumulated during a regressive event and the base of the formation becomes progressively younger eastward. The sand may have been supplied by rivers along the western coast but the major source was south of the study area. The lower Nowra Sandstone is separated from the upper part of the formation by an extensive ravinement surface overlain by the Purnoo Conglomerate Member. In contrast to the lower unit, the upper Nowra Sandstone forms a westward thickening wedge that represents a backstepping nearshore sand facies that accumulated during a transgression. The upper Nowra Sandstone passes vertically and laterally eastward into the Berry Siltstone. Thus both boundaries of the Nowra Sandstone are diachronous, first younging eastward and then westward as a response to a regressive‐transgressive episode.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号