共查询到20条相似文献，搜索用时 33 毫秒
1.
Subhasis Pradhan Sujit Kumar Mishra Rakesh Baral Rabindro Nath Samal Pratap Kumar Mohanty 《Marine Geodesy》2017,40(2-3):187-203
ABSTRACTChilika, a lagoon along the east coast of India, is undergoing transformation due to frequent shoreline change near inlet(s). Shoreline change near inlet includes change in position and shape of inlet, inlet channel length, and spit growth/erosion. These variable features of lagoon inlet(s) critically depend on alongshore sediment transport (LST) and discharge (water and sediment) from the lagoon to the sea. The LST and the processes responsible for sand spit growth/erosion, considered as important attributes of inlet stability, are the subject matter of the present investigation and hence the study assumes importance. The study includes integration of observational and modeling framework. Observations include nearshore wave, bathymetry, beach profile, shoreline and sediment grain size of spits while numerical modeling includes simulation of the wave using MIKE 21 Spectral Wave model and LST simulation using LITtoral DRIFT. The results indicate that the predominant wave directions as S and SSE, which induces round the year south to north alongshore transport with significant seasonal variation in magnitude. The estimated LST closely matches with previous studies near Chilika inlet and for other locations along the Odisha coast. Besides temporal variability, the study reveals spatial variability in alongshore transport near Chilika inlet and considers it as one of the important attributes along with northward spit growth for inlet migration/closure/opening. 相似文献
2.
P. Ruggiero D.J.R. Walstra G. Gelfenbaum M. van Ormondt 《Coastal Engineering》2009,56(11-12):1153-1172
A coupled waves–currents-bathymetric evolution model (DELFT-3D) is compared with field measurements to test hypotheses regarding the processes responsible for alongshore varying nearshore morphological changes at seasonal time scales. A 2001 field experiment, along the beaches adjacent to Grays Harbor, Washington, USA, captured the transition between the high-energy erosive conditions of winter and the low-energy beach-building conditions typical of summer. The experiment documented shoreline progradation on the order of 10–20 m and on average approximately 70 m of onshore sandbar migration during a four-month period. Significant alongshore variability was observed in the morphological response of the sandbar over a 4 km reach of coast with sandbar movement ranging from 20 m of offshore migration to over 175 m of onshore bar migration, the largest seasonal-scale onshore migration event observed in a natural setting. Both observations and model results suggest that, in the case investigated here, alongshore variations in initial bathymetry are primarily responsible for the observed alongshore variable morphological changes. Alongshore varying incident hydrodynamic forcing, occasionally significant in this region due to a tidal inlet and associated ebb-tidal delta, was relatively minor during the study period and appears to play an insignificant role in the observed alongshore variability in sandbar behavior at kilometer-scale. The role of fully three-dimensional cell circulation patterns in explaining the observed morphological variability also appears to be minor, at least in the case investigated here. 相似文献
3.
The relative importance of radiation stress gradients and alongshore pressure gradients to surfzone dynamics is investigated using observations of water levels, waves, and flows measured onshore of a large ebb-tidal delta. Incident wave heights measured along the ~ 11-m depth contour varied about 10% over a 1.2-km alongshore transect, resulting in alongshore wave setup differences on the order of 10 cm over the 600-m extent of the surfzone instrument array in 1.5-m depth. Despite the moderate alongshore variability in wave heights, the southerly alongshore pressure gradient, associated with the alongshore variability of wave-driven set-up, was typically twice as large as the northerly radiation stress gradient forcing, consistent with the observed southerly currents during the week-long experiment. The magnitude of the alongshore forcing and resulting alongshore velocity is reproduced by the two-dimensional depth-averaged numerical model of Shi et al. (JGR-Oceans, 2011). These observations, together with the numerical results, indicate that moderate alongshore wave height gradients (O(10− 4)) outside the surfzone owing to alongshore variations in the offshore bathymetry can result in alongshore pressure gradients that are larger than radiation stress gradients. 相似文献
4.
Nathaniel G. Plant Kacey L. Edwards James M. Kaihatu Jayaram Veeramony Larry Hsu K. Todd Holland 《Coastal Engineering》2009
Nearshore wave and flow model results are shown to exhibit a strong sensitivity to the resolution of the input bathymetry. In this analysis, bathymetric resolution was varied by applying smoothing filters to high-resolution survey data to produce a number of bathymetric grid surfaces. We demonstrate that the sensitivity of model-predicted wave height and flow to variations in bathymetric resolution had different characteristics. Wave height predictions were most sensitive to resolution of cross-shore variability associated with the structure of nearshore sandbars. Flow predictions were most sensitive to the resolution of intermediate scale alongshore variability associated with the prominent sandbar rhythmicity. Flow sensitivity increased in cases where a sandbar was closer to shore and shallower. Perhaps the most surprising implication of these results is that the interpolation and smoothing of bathymetric data could be optimized differently for the wave and flow models. We show that errors between observed and modeled flow and wave heights are well predicted by comparing model simulation results using progressively filtered bathymetry to results from the highest resolution simulation. The damage done by over smoothing or inadequate sampling can therefore be estimated using model simulations. We conclude that the ability to quantify prediction errors will be useful for supporting future data assimilation efforts that require this information. 相似文献
5.
Idealized computational simulations with the nearshore model XBeach were carried out for a series of barred beach configurations in order to quantify the impact of nearshore bars on infragravity swash. Results show that nearshore bar systems reduce infragravity swash energy at the shoreline. The amount of swash reduction was found to correlate with both bar depth and rip width, when a rip channel is present. In order to develop a generalized empirical model for significant infragravity swash for barred beaches, the simulations were used to extend the empirical swash model of Stockdon et al. (2006) to include bar characteristics. The developed empirical model relates significant infragravity swash to incident wave conditions and nearshore bar depth. With respect to Stockdon et al. (2006), this new model improves predictive skill by reducing root-mean-square error by 50% for the computational simulations and by 15% when applied to a range of field data. 相似文献
6.
In this paper, infragravity (IG) waves, forced by normally and obliquely incident wave groups, are studied using the quasi-3D (Q3D) nearshore circulation model SHORECIRC [Van Dongeren, A.R., I.A. Svendsen, 1997b. Quasi 3-D modeling of nearshore hydrodynamics. Research report CACR-97-04. Center for Applied Coastal Research, University of Delaware, Newark, 243 pp.], which includes the Q3D effects. The governing equations that form the basis of the model, as well as the numerical model and the boundary conditions, are described. The model is applied to the case of leaky IG waves. It is shown that the Q3D terms have a significant effect on the cross-shore variation of the surface elevation envelope, especially around the breakpoint and in the inner surf zone. The effect of wave groupiness on the temporal and spatial variation of all Q3D terms is shown after which their contribution to the momentum equations is analyzed. This reveals that only those Q3D coefficients, which appear in combination with the largest horizontal velocity shears make a significant contribution to the momentum equations. As a result of the calculation of the Q3D coefficients, the IG wave velocity profiles can be determined. This shows that in the surf zone, the velocity profiles exhibit a large curvature and time variation in the cross-shore direction, and a small — but essential — depth variation in the longshore direction. 相似文献
7.
A laboratory experiment on alongshore currents is conducted for two plane beaches with slopes 1:40 and 1:100 to investigate the instability of alongshore currents.The dye release experiment is also performed synchronously in surf zone.Complicated and strongly unstable motions of alongshore currents are observed in the experiment.To examine the spatial and temporal variations of the shear instabilities of longshore clearly,dye batches are released in surf zone.The deformation of the dye patch is observed efficiently and effectively with charge coupled device(CCD) system.Some essential characteristics of the shear instability are validated from the results of image analyses of the temporal variation of the dye patch.The influences of alongshore currents,Stokes drift,large-scale vorticity and the shear instabilities on the transport of dye are analyzed using the collected images.The spatial structure of the instabilities of longshore currents is studied by analyzing collected images of the dye patch.And the phase velocity of the meandering movements is obtained through measuring the movement distances of the oscillations of dye patch in alongshore direction with time.The results suggest that the propagation speed of the shear instability is approximately 50%-75% of maximum of mean alongshore currents for irregular and regular waves.The calculated propagation speed using a linear instability analysis theory is compared with the experimental results.The comparison shows agreements between them. 相似文献
8.
A.J.H.M. Reniers M.J. Groenewegen K.C. Ewans S. Masterton G.S. Stelling J. Meek 《Coastal Engineering》2010
The accuracy of nearshore infragravity wave height model predictions has been investigated using a combination of the spectral short wave evolution model SWAN and a linear 1D SurfBeat model (IDSB). Data recorded by a wave rider located approximately 3.5 km from the coast at 18 m water depth have been used to construct the short wave frequency-directional spectra that are subsequently translated to approximately 8 m water depth with the third generation short wave model SWAN. Next the SWAN-computed frequency-directional spectra are used as input for IDSB to compute the infragravity response in the 0.01 Hz–0.05 Hz frequency range, generated by the transformation of the grouped short waves through the surf zone including bound long waves, leaky waves and edge waves at this depth. Comparison of the computed and measured infragravity waves in 8 m water depth shows an average skill of approximately 80%. Using data from a directional buoy located approximately 70 km offshore as input for the SWAN model results in an average infragravity prediction skill of 47%. This difference in skill is in a large part related to the under prediction of the short wave directional spreading by SWAN. Accounting for the spreading mismatch increases the skill to 70%. Directional analyses of the infragravity waves shows that outgoing infragravity wave heights at 8 m depth are generally over predicted during storm conditions suggesting that dissipation mechanisms in addition to bottom friction such as non-linear energy transfer and long wave breaking may be important. Provided that the infragravity wave reflection at the beach is close to unity and tidal water level modulations are modest, a relatively small computational effort allows for the generation of long-term infragravity data sets at intermediate water depths. These data can subsequently be analyzed to establish infragravity wave height design criteria for engineering facilities exposed to the open ocean, such as nearshore tanker offloading terminals at coastal locations. 相似文献
9.
An offshore shoal or bar refracts ocean surface waves and causes wave focusing/defocusing on the adjacent beach.Wave focal patterns characterized by alongshore variations in wave height, wave angle, and breaking location induce alongshore non-uniformities of wave setup and nearshore circulation, e.g., rip currents and alongshore currents, in the surfzone. A simplified analytic model for nearshore circulation generated by focused/defocused waves on a planar beach is developed and theoretical solutions are obtained using transport stream function and perturbations in alongshore distributions of wave height and wave angle at the breaker line. The analytic model suggests that alongshore currents are strongly affected by a pair of counter-rotating vortices generated shoreward of the wave focal zone. The vortices are persistent, and their strengths depend on the amplitudes of alongshore variations in wave height and wave angle. The alongshore gradient in wave height tends to intensify the vortices while the convergence of wave angle tends to weaken the vortices. Divergent flows associated with the vortices in the surfzone are intense,strengthening alongshore currents in the downstream of the wave focal zone and weakening alongshore currents or causing flows reversal in the upstream. Alongshore currents are modulated by rip currents associated with the wave focusing/defocusing patterns. 相似文献
10.
Beach Wizard: Nearshore bathymetry estimation through assimilation of model computations and remote observations 总被引：3，自引：0，他引：3
Ap van Dongeren Nathaniel Plant Anna Cohen Dano Roelvink Merrick C. Haller Patricio Cataln 《Coastal Engineering》2008,55(12):1016-1027
A data–model assimilation method (called “Beach Wizard”) is presented with which the nearshore subtidal bathymetry can be accurately estimated based on video-derived observations of wave roller dissipation and variation of the intertidal shoreline, and/or radar-derived observations of wave celerity. Using many consecutive images, these observed properties are compared with numerical model results, and through a simple, optimal least-squares estimator approach the estimated bathymetry is adjusted gradually for each image in order to improve the fit between model output and observations. The key advantages of the technique are that it is based on multiple sources of information (i.e., different remote sensors and/or data products), depends on only a few free parameters (to which the model results are insensitive), and shows good skill. Herein, the technique is applied to a synthetic case and two sets of field data from sites at Duck, NC (USA) and Egmond (The Netherlands). The method, which may be extended with observations of other properties from other sources than the three described in this paper, can deliver coastal state information (i.e., simultaneous updates of bathymetry, waves, and currents) with high temporal and spatial resolution and can be used in conjunction with or instead of in-situ measured data. 相似文献
11.
The measurements by using ADCP (500 KH) and CTD were made during August 2000 in the south (37°55''N, 120°25''E) of the Bohai Sea, where the water depth was about 16.5m. The data of horizontal velocity with sampling interval of 2 min in 7 layers were obtained. The power spec-trum analysis of these data indicates that there are very energetic infragrvity waves with a period of about 6 min. The coherence spetrum analysis and the analysis of temporal variation of shear show that these infragravity waves are mainly the free wave model (properties of edge waves), in the meantimethey possess some characteristics of internal waves, which are likely due to the distinctive marine environment in this area. It is speculated on that the instability processes (chiefly shear instability) of sheared stratified tidal flow owing to the effect of sea-floor slope in the coastal area might be the main mechanism generating these infragravity waves. 相似文献
12.
Regional Ocean Modeling System (ROMS v 3.0), a three-dimensional numerical ocean model, was previously enhanced for shallow water applications by including wave-induced radiation stress forcing provided through coupling to wave propagation models (SWAN, REF/DIF). This enhancement made it suitable for surf zone applications as demonstrated using examples of obliquely incident waves on a planar beach and rip current formation in longshore bar trough morphology (Haas and Warner, 2009). In this contribution, we present an update to the coupled model which implements a wave roller model and also a modified method of the radiation stress term based on Mellor (2008, 2011a,b,in press) that includes a vertical distribution which better simulates non-conservative (i.e., wave breaking) processes and appears to be more appropriate for sigma coordinates in very shallow waters where wave breaking conditions dominate. The improvements of the modified model are shown through simulations of several cases that include: (a) obliquely incident spectral waves on a planar beach; (b) obliquely incident spectral waves on a natural barred beach (DUCK'94 experiment); (c) alongshore variable offshore wave forcing on a planar beach; (d) alongshore varying bathymetry with constant offshore wave forcing; and (e) nearshore barred morphology with rip-channels. Quantitative and qualitative comparisons to previous analytical, numerical, laboratory studies and field measurements show that the modified model replicates surf zone recirculation patterns (onshore drift at the surface and undertow at the bottom) more accurately than previous formulations based on radiation stress (Haas and Warner, 2009). The results of the model and test cases are further explored for identifying the forces operating in rip current development and the potential implication for sediment transport and rip channel development. Also, model analysis showed that rip current strength is higher when waves approach at angles of 5° to 10° in comparison to normally incident waves. 相似文献
13.
The formation time of alongshore morphological variability in surf zone sand bars has long been known to differ from one beach to the other and from one post-storm period to another. Here we investigate whether the type of sea state, i.e. distant swell waves or locally generated short period wind sea, affects the formation time of the emerging alongshore topographic variability.A numerical modeling approach is used to examine the emergence of alongshore variability under different shore-normal wave forcing. A research version of Delft3D, operating on the time-scale of wave groups, is applied to a schematised bathymetry with a single bar. The model is then used to investigate several wave scenarios, examining the impact of peak period, frequency spread and directional spread on the formation time of alongshore variability.Results show that an increase in wave period has a large effect, changing the formation time up to O (250%) in case the wave period is changed from a representative value for the Dutch coast (Tp ~ 5–6 s) to an Australian South East coast value (Tp ~ 10–12 s). In contrast, modifications in the directional and frequency spread of the wave field result only in a minor change in the formation time.Examination of hydrodynamics and potential sediment transport shows that the variations in formation time are primarily related to changes in the magnitude of the time-averaged flow conditions. Variations in the magnitude of very low frequency (f < 0.004 Hz) or infragravity (0.004 < f < 0.04 Hz) surf zone flow velocities do not affect the mean sediment transport capacity. Consequently the formation speed of patterns is primarily governed by positive feedback between mean flow and morphology, and low frequency flow fluctuations are of minor importance.These findings indicate that the development of alongshore topographic variability may be faster at swell dominated open coasts, primarily due to the occurrence of longer period swell. Also, at a given site, the arrival of a long wave period swell after a storm can accelerate the emergence of variability. 相似文献
14.
15.
Modelling storm impacts on beaches, dunes and barrier islands 总被引：10，自引：0，他引：10
Dano Roelvink Ad Reniers Ap van Dongeren Jaap van Thiel de Vries Robert McCall Jamie Lescinski 《Coastal Engineering》2009,56(11-12):1133-1152
A new nearshore numerical model approach to assess the natural coastal response during time-varying storm and hurricane conditions, including dune erosion, overwash and breaching, is validated with a series of analytical, laboratory and field test cases. Innovations include a non-stationary wave driver with directional spreading to account for wave-group generated surf and swash motions and an avalanching mechanism providing a smooth and robust solution for slumping of sand during dune erosion. The model performs well in different situations including dune erosion, overwash and breaching with specific emphasis on swash dynamics, avalanching and 2DH effects; these situations are all modelled using a standard set of parameter settings. The results show the importance of infragravity waves in extending the reach of the resolved processes to the dune front. The simple approach to account for slumping of the dune face by avalanching makes the model easily applicable in two dimensions and applying the same settings good results are obtained both for dune erosion and breaching. 相似文献
16.
17.
A laboratory experiment on alongshore currents was conducted for two plane beaches, with gradients 1:40 and 1:100, to investigate the instability of alongshore currents. Complicated and strongly unstable alongshore current motions were observed. In order to clearly examine the spatial and temporal variations of the shear instability of the currents, digital images from a charge-coupled device (CCD) recorded the deformations of dye batches released in the surf zone. Some essential characteristics of the shear instability were obtained from analyses of images showing the temporal variation of the dye patches.A high-resolution spectral analysis technique (the maximum entropy method, or MEM) was used to analyze the dominant frequency of the observed oscillation, along with the trigonometric regression method for determining the variations of the oscillation strength in the cross-shore direction. The propagation speed of the dye patch was obtained by tracking the movement over time of fixed locations in the dye patch, such as its peak, in the longshore direction. This data was then fitted linearly.Alongshore and cross-shore velocity time series acquired from sensors showed clearly that large-amplitude, long-period (about 50 s or 100 s) oscillations were present for all sensors deployed in the cross-shore direction under regular and irregular wave conditions. The analysis found that the maximum shear wave amplitude was approximately one-sixth of the maximum for the mean alongshore current, and occurred approximately at the position of the maximum of the mean alongshore current for irregular waves. The spatial structure of the shear waves was studied by analyzing collected images of the dye patches. The phase velocity of the meandering movements was obtained by measuring the magnitude of the oscillations of the dye patches in the alongshore direction with respect to time. The results suggest that the propagation speed of the shear instability was approximately one-half to three-quarters of the maximum mean longshore current for both regular and irregular waves.Linear instability analysis theory was applied to the characteristics of alongshore current instability, which suggested that there are two instability modes related to the observed oscillations: the frontshear mode observed for the 1:100 slope, and the backshear mode observed for the 1:40 slope. Theoretical analyses agreed with the experimental results in both cases. The velocity profile of the mean longshore current was found to affect the instability mode significantly, leading to further investigations on the influence of the velocity profiles and to provide support for the above conclusions. 相似文献
18.
In order to investigate surf zone hydrodynamics through two-dimensional numerical simulations of nearshore circulation under random wave environment, a nearshore circulation model, SHORECIRC, and a random wave model, SWAN, were combined and utilized. Using this combined model, a numerical simulation of the October 2, 1997 SandyDuck field experiment was performed. For this simulation, field topography and an input offshore spectrum were constructed using observed data sets synchronized with the experiment. The wave-breaking model in SWAN was modified by using breaker parameters varied according to bottom slope. The simulation results were compared with the experimental data, which revealed a well-developed longshore current, as well as with results using other combinations which were SHORECIRC and its original monochromatic wave-driver, and SHORECIRC and the default of SWAN. The results from the novel combined model agreed well with the experimental data. The results of the present simulation also indicate that alongshore field topography influences shear fluctuation of longshore currents. 相似文献
19.
20.
Environment predictions for locations for which bathymetric data is missing, poor or outdated requires the use of some sort of representative bathymetric form, usually one that is concave up but monotonic. We propose and test a parametric form that superimposes realistic sand bars (Ruessink et al., 2003b) on a background profile that mixes a concave up nearshore with a planar far field behavior. Implementation at any new site involves estimation of five parameters, three that can be found from approximate information from climatology or old offshore charts, one that can be estimated by almost any remote sensing modality and one, hsea that is less well understood but mostly affects deeper bathymetry that has little impact on the resulting surf zone hydrodynamics. Tests against several hundred surveys at three diverse locations show that bathymetry is better estimated by the new barred form than with a previous monotonic profiles in about 80% of cases. The remaining cases are usually associated with the parametric prediction of bars that look realistic but are out of phase. The presence of parametric bars has an even greater impact on predicted hydrodynamics since wave breaking is concentrated at sand bar locations. Modeled cross-shore transects of alongshore current and wave height over the measured survey profile are well represented by modeled transects over the barred parametric form but not for results over a Dean profile. The peak alongshore current strength and location are particularly sensitive to the presence of a sand bar. 相似文献