共查询到20条相似文献，搜索用时 875 毫秒
1.
Naoki Niwa Takuji Kobori Motoichi Takahashi Hiroshi Midorikawa Narito Kurata Takayuki Mizuno 《地震工程与结构动力学》2000,29(6):789-812
A semi‐active hydraulic damper (SHD) for a semi‐active damper system, which is useful for practical structural control especially for large earthquakes, has been developed. Its maximum damping force is set to 1 or 2 MN, and it is controlled by only 70 W of electric power. An SHD with a maximum damping force of 1 MN was applied to an actual building in 1998. This paper first presents the results of a dynamic loading test to confirm the control performance of the SHD. Next, an analytical model of SHDs (SHD model) is constructed with the same concept for two kinds of SHDs based on the test results. Through simulation analyses of the test results using the proposed SHD model, the dynamic characteristics of the SHD can be well represented within practical conditions. Simulation analyses are also carried out using a simple structure model with the SHD model. It is shown that this SHD model can be used to precisely evaluate the control effect of the semi‐active damper system and is useful in practical SHD design under the applied conditions. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
2.
相邻结构地震反应MR阻尼器控制的仿真分析 总被引：2，自引：0，他引：2
本文仿真分析了应用磁流变(MR)阻尼器对相邻结构地震反应的控制效果,为进一步开展模型试验研究奠定了基础。建立了地震激励下相邻结构MR阻尼器控制系统的运动方程,提出了描述MR阻尼器阻尼力滞回特性的改进S igmoid模型,分别对应用开关控制、半主动控制以及最小或最大电流被动控制的四种控制方法的相邻结构地震反应的控制效果进行了仿真分析。结果表明,在相邻结构间连接安装MR阻尼器可以有效地控制相邻结构的地震反应,且开关控制方法和半主动控制方法的控制效果均好于两种被动控制方法,体现了MR阻尼器阻尼力可调的优点;在四种控制方法中,半主动控制方法的控制效果最好,体现了MR阻尼器阻尼力具有连续调节能力的优点;若能解决MR阻尼器的剩磁问题,半主动控制方法的控制效果会得到进一步的提高。 相似文献
3.
Narito Kurata Takuji Kobori Motoichi Takahashi Toshihisa Ishibashi Naoki Niwa Jun Tagami Hiroshi Midorikawa 《地震工程与结构动力学》2000,29(5):629-645
The authors developed a semi‐active hydraulic damper (SHD) and installed it in an actual building in 1998. This was the first application of a semi‐active structural control system that can control a building's response in a large earthquake by continuously changing the device's damping coefficient. A forced vibration test was carried out by an exciter with a maximum force of 100 kN to investigate the building's vibration characteristics and to determine the system's performance. As a result, the primary resonance frequency and the damping ratio of a building that the SHDs were not jointed to, decreased as the exciting force increased due to the influence of non‐linear members such as PC curtain walls. The equivalent damping ratio was estimated by approximating the resonance curves using the steady‐state response of the SDOF bilinear hysteretic system. After the eight SHDs were jointed to the building, the system's performance was identified by a response control test for steady‐state vibration. The elements that composed the semi‐active damper system demonstrated the specified performance and the whole system operated well. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
4.
Passive supplemental damping in a seismically isolated structure provides the necessary energy dissipation to limit the isolation system displacement. However, damper forces can become quite large as the passive damping level is increased, resulting in the requirement to transfer large forces at the damper connections to the structure which may be particularly difficult to accommodate in retrofit applications. One method to limit the level of damping force while simultaneously controlling the isolation system displacement is to utilize an intelligent hybrid isolation system containing semi-active dampers in which the damping coeffic ient can be modulated. The effectiveness of such a hybrid seismic isolation system for earthquake hazard mitigation is investigated in this paper. The system is examined through an analytical and computational study of the seismic response of a bridge structure containing a hybrid isolation system consisting of elastomeric bearings and semi-active dampers. Control algorithms for operation of the semi-active dampers are developed based on fuzzy logic control theory. Practical limits on the response of the isolation system are considered and utilized in the evaluation of the control algorithms. The results of the study show that both passive and semi-active hybrid seismic isolation systems consisting of combined base isolation bearings and supplemental energy dissipation devices can be beneficial in reducing the seismic response of structures. These hybrid systems may prevent or significantly reduce structural damage during a seismic event. Furthermore, it is shown that intelligent semi-active seismic isolation systems are capable of controlling the peak deck displacement of bridges, and thus reducing the required length of expansion joints, while simultaneously limiting peak damper forces. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
5.
JOS A. INAUDI 《地震工程与结构动力学》1997,26(3):361-376
A control strategy for semi-active friction devices leading to efficient hysteretic dissipaters is proposed. The control algorithm makes the contact force between the sliding surfaces of the damper proportional to the absolute value of the prior local peak of the damper deformation. This control logic leads to a non-linear force–deformation relation that satisfies homogeneity of degree one; this means that, like in a linear viscoelastic damping model, when the deformation is scaled by a constant, the force results are scaled by the same constant. The closed-loop system shows rectangular hysteresis loops which enclose an area proportional to the square of the deformation of the damper. Some characteristics of the dynamic response of structures incorporating this type of semi-active damper are investigated. It is demonstrated that in the case of single-degree-of-freedom models, the period of vibration and decay ratio are independent of the amplitude of vibration. In the case of multi-degree-of-freedom models with this type of nonlinearity, the free-vibration response can exhibit natural modes of vibration. A linearization method is proposed and modelling tools for the delay associated with actuator dynamics and for the flexibility of the brace connecting the damper to the structure are presented. © 1997 by John Wiley & Sons, Ltd. 相似文献
6.
基于AFSMC算法的结构非线性振动MR控制与仿真分析 总被引：2，自引：0，他引：2
作为最近发展起来的高性能半主动控制装置,磁流变阻尼器通过改变磁场强度来调节控制力,可靠度高,体积小,出力大,并且具有Fail-Safe的特点,是一种具有广泛应用前景的新型结构控制装置。本文主要研究结构非线性振动的磁流变阻尼半主动控制。首先采用我们提出的自适应模糊滑模控制(AFSMC)算法得到了结构非线性振动的主动控制力,然后参照主动控制力,提出和仿真实现了结构非线性振动的磁流变阻尼半主动控制。最后,针对3层和20层benchm ark非线性模型,每层均设置一个磁流变阻尼器,对在给定的地震动下的结构响应进行了计算,分析了半主动控制跟踪主动控制的效果,并且对于半主动控制下的结构位移响应、加速度响应等各项指标也进行了对比分析。仿真结果表明,由于自适应模糊滑模控制算法与半主动控制算法相结合可以很好地实现结构非线性振动的半主动控制,所以能够得到令人满意的控制结果。 相似文献
7.
半主动磁流变阻尼控制结构的地震反应分析 总被引：35，自引：6，他引：29
本文对磁流变阻尼器的性能及恢复力模型进行了介绍,并对其参数进行了设计,提出了基于现代最优控制理论的半主动控制方法．计算实例分析结果表明,采用磁流变阻尼器对结构进行半主动控制能够有效地减小结构的地震反应． 相似文献
8.
变阻尼半主动结构控制振动台试验 总被引：5，自引：1，他引：4
在一个１：４的五层模型刚架结构上进行了变阻尼半主动结构控制振动台试验．在结构的底层安装了一个溢流阀式变阻尼控制器,输入几种不同的地震动并采用几种不同的控制算法对结构进行了变阻尼半主动控制。振动台试验结果表明,受阻尼半主动结构控制仅需要很少的电能,就可以达到较好的控制效果,是一种很有应用前景的结构振动控制方案。结合溢流阀式变阻尼控制器的特点,分析了一些因素对控制效果的影响． 相似文献
9.
带裙房高层建筑地震反应控制振动台试验研究 总被引：1，自引：1，他引：0
2002年9月在香港理工大学成功地进行了带裙房高层建筑地震反应控制试验研究。设计和制作的结构模型是带3层裙房的12层高楼剪切模型,在裙房顶层与主楼之间安装单MR阻尼器形成MR阻尼器耦联结构模型。MR阻尼器采用美国LORD公司摩擦型MR阻尼器,并且选用其配套产品计算机电流控制器对其进行控制,控制系统采用德国dSPACE公司实时控制系统。对独立主楼、独立裙房和原结构模型的动力特性进行了辨识;对结构模型进行了El Centro地震动作用下的地震反应振动台试验;以作者提出的MR阻尼器半主动逻辑控制算法,对MR阻尼器耦联的结构模型进行了地震反应振动台试验。试验结果表明：用MR阻尼器耦联主楼与裙房,采用半主动逻辑控制方法进行控制,能有效抑制主楼的鞭梢效应并使主楼和裙房的地震反应减小。 相似文献
10.
11.
在不同频率特征的地震动作用下,三维隔震单层球面网壳结构隔震层最优阻尼设计不同.文中基于单自由度体系加速度传递率函数,提出一种地震动主频相关的加速度阈值变阻尼半主动控制方法以及地震动主频分区识别方法.基于ABAQUS软件的DLOAD子程序,开展了三维隔震单层球面网壳被动控制与半主动控制有限元计算,对节点加速度、杆件轴力进... 相似文献
12.
神经网络半主动TLCD对偏心结构的减震控制 总被引：5，自引：0，他引：5
本文采用在结构水平双向设置TLCD半主动控制装置的方法，对偏心结构在多维地震作用下的振动控制问题进行研究。首先利用多层前向神经网络，对偏心结构在双向地震输入下的两个平动方向的反应进行预测，然后在建立起半主动控制策略的基础上，利用神经网络根据控制准则调整TLCD的开孔率，实现以结构的半主动控制，数值结构表明，这种方法能对结构的平动反应和扭转反应都能起到的较好的减震效果。 相似文献
13.
磁流变阻尼器作为一种比较典型的半主动控制元件,具有构造简单、响应速度快、耐久性好、阻尼力大且连续可调等优点。即使地震中能源中断,磁流变阻尼器仍可以作为被动耗能装置继续工作发挥作用,可靠性高。设计合理有效的磁流变阻尼器半主动控制方法,对于整体结构的减震效果尤其重要。提出一种改进的磁流变阻尼器的半主动控制策略-改进的Bang-Bang控制策略,对装有磁流变阻尼器的减震控制3层框架结构进行了一系列的实时混合模拟试验,对多种半主动控制方法下的振动控制效果进行试验分析。试验结果表明:磁流变阻尼器对框架结构的减震效果显著,并验证了提出的磁流变阻尼器半主动控制策略的有效性。 相似文献
14.
磁流变液是一种性能优良的智能材料,用其制成的MR阻尼器是一种理想的半主动控制装置。本文提出了一种新型MR阻尼器——逆变型MR阻尼器,给出了逆变型MR阻尼器的设计方法,并设计了一个足尺的阀式逆变型MR阻尼器。实验证明逆变型MR阻尼器阻尼力可调,在电源失效或无电源时能够在大阻尼状态工作,这提高了半主动控制装置在地震中的使用安全性。逆变型MR阻尼器具有良好的可靠性、实用性和经济性。本文最后针对试验中阻尼器出力的可调范围比较小的问题给出了几种改进的思路。 相似文献
15.
基于H∞理论的磁流变阻尼器半主动容错控制 总被引：1，自引：0，他引：1
建筑结构的半主动控制系统中的传感器,在强震作用下可能因出现故障而影响控制效果。以磁流变阻尼器为例,研究半主动容错控制系统的设计方法。首先,研究了基于状态观测器的半主动H∞控制器设计方法,并将之应用到建筑结构采用磁流变阻尼器的减振控制中;运用改进Bouc-Wen模型,计算磁流变阻尼器的阻尼力,通过求解一个代数Riccati方程和一个状态观测方程,得出了基于状态观测器的H∞主动控制律;再对其采用Clipped-optimal方法实施半主动控制策略。然后,针对传感器故障,利用观测器组的输出残差对故障进行在线诊断,并通过几个观测器状态值的比较得到故障的大小,并据此对传感器的测量值进行修正,从而消除故障对闭环系统的影响,最终实现半主动H∞容错控制。仿真结果表明,该方法具有很好的容错控制效果。 相似文献
16.
M. AB 《地震工程与结构动力学》1996,25(7):743-749
A semi-active tuned mass damper (TMD) which is capable of adjusting initial displacement and damping is applied to seismic protection of structures. Control algorithms are derived in closed forms using perturbation analysis on modal properties of the single degree of freedom (SDOF) structure/TMD system. Because perturbation solutions are given in a relatively simple form, the control algorithms are developed in a physically intuitive manner. In the first half of the paper, the control algorithms are introduced using numerical simulations of the impulse response. Then the algorithms are applied to seismic protection of civil structures using the strategy of multiple releasing and capturing of TMDs. The control strategy for seismic control is summarized in a flow chart. Numerical studies with the El Centro earthquake record show that the proposed semi-active method has higher performance than conventional passive TMDs. 相似文献
17.
为了研究新型电磁惯性质量阻尼器(Electromagnetic Inertial Mass Damper,EIMD)应用于偏心高层结构振动控制工程的可行性,鉴于半主动控制技术的优点,基于LQR主动控制算法,提出一种可行的EIMD-偏心高层结构半主动控制策略,同时研究EIMD在结构每层中安装位置不同对于控制偏心高层结构扭转反应的影响。以一个实体24层偏心高层结构作为研究对象验证地震作用下所提控制策略的有效性,仿真结果表明:(1)所提半主动控制策略基本能够达到主动控制对于结构振动反应分量的控制效果;(2)当采用半主动控制策略时,调整EIMD的安装位置对于偏心高层结构转角和转角加速度反应有着较好的控制效果。 相似文献
18.
本文研究半主动控制系统中磁流变(MR)阻尼器的控制力优化问题,从而提高MR阻尼器的半主动控制效果。文中首先建立了多自由度结构MR阻尼器控制系统的运动方程;然后根据MR阻尼器的出力特性提出了结构控制的半主动控制律,并对控制率中MR阻尼器的最大控制力设计值提出了不同的优化取值方法;最后仿真分析了MR阻尼器的不同最大控制力设计值对不同自由度结构的控制效果。研究表明,当设计值取最优控制力的平均绝对值或均方根值时,MR阻尼器的最大控制力比最优控制力的最大值降低了85%,而控制效果降低不多,可以满足对结构的控制要求;降低最大控制力设计值后,不但可以充分发挥MR阻尼器的出力性能,而且可以缩小MR阻尼器的设计尺寸,便于工程应用。 相似文献
19.
Trust-region based instantaneous optimal semi-active control of long-span spatially extended structures with MRF-04K damper 总被引：1，自引：0，他引：1
In the field of civil engineering, magnetorheological fluid （MRF） damper-based semi-active control systems have received considerable attention for use in protecting structures from natural hazards such as strong earthquakes and high winds. In this paper, the MRF damper-based semi-active control system is applied to a long-span spatially extended structure and its feasibility is discussed. Meanwhile, a _trust-region method based instantaneous optimal semi-active control algorithm （TIOC） is proposed to improve the performance of the semi-active control system in a multiple damper situation. The proposed TIOC describes the control process as a bounded constraint optimization problem, in which an optimal semi- active control force vector is solved by the trust-region method in every control step to minimize the structural responses. A numerical example of a railway station roof structure installed with MRF-04K dampers is presented. First, a modified Bouc- Wen model is utilized to describe the behavior of the selected MRF-04K damper. Then, two semi-active control systems, including the well-known clipped-optimal controller and the proposed TIOC controller, are considered. Based on the characteristics of the long-span spatially extended structure, the performance of the control system is evaluated under uniform earthquake excitation and travelling-wave excitation with different apparent velocities. The simulation results indicate that the MR fluid damper-based semi-active control systems have the potential to mitigate the responses of full-scale long-span spatially extended structures under earthquake hazards. The superiority of the proposed TIOC controller is demonstrated by comparing its control effectiveness with the clipped-optimal controller for several different cases. 相似文献
20.
基于能量方程的建筑结构半主动控制 总被引：4，自引：2，他引：2
基于地震作用下结构的能量响应方程,本文提出根据结构吸收能量、相对动能和变形能的变化(对时间的一次导数)进行结构的“开-关”半主动减震的控制律;在物理坐标系中对这3种控制律的动力特征和控制效果,以及作动器参数的选取进行了分析。本文针对建筑结构进行了数值仿真。计算结果表明,本文提出的控制律可以有效地减小了结构的位移响应,对随机不确定的地震波均具有良好的减震效果,适应性强,而且控制器参数合理。其中根据结构变形能推导的控制律的半主动控制效果优于其它2种控制律。 相似文献