共查询到20条相似文献，搜索用时 250 毫秒
1.
地下水数值模拟是目前定量研究地下水水量和水质的重要手段。使用基于随机理论的MonteCarlo方法来进行地下水数值模拟。这种方法能较好地考虑水文地质参数的空间变异性。主要将MonteCarlo方法和确定性模型模拟方法的模拟结果在渗透系数场、水头场、速度场和浓度场等方面进行了比较。结果表明:在模拟三维非均质含水层中的溶质运移问题时,充分考虑了含水层渗透系数空间变异性的MonteCarlo法比确定性方法更为有效,模拟精度提高了很多,且对模拟误差及误差来源有合理的数学解释。 相似文献
2.
Wang Mingyu The University of Arizona Tucson Arizona USA Department of Water Resources Environmental Engineering China University of Geosciences Beijing Chen Jinsong Wan Li Department of Water Resources Environmental Engineering 《中国地质大学学报(英文版)》2001,12(3)
ＩＮＴＲＯＤＵＣＴＩＯＮＧｒｏｕｎｄｗａｔｅｒｏｒｆｌｕｉｄｆｌｏｗｍｏｄｅｌｉｎｇｉｎｆｒａｃｔｕｒｅｄｒｏｃｋｓｉｓａｃｏｍｐｌｉｃａｔｅｄｔｈｅｏｒｅｔｉｃａｌａｎｄａｐｐｌｉｅｄｔｏｐｉｃ.Ｂｏｔｈｔｈｅｏｒｅｔｉｃａｌｌｙａｎｄｏｐｅｒａｔｉｏｎａｌｌｙ ,ｉｔｉｓｉｍｐｏｒｔａｎｔｉｎｍａｎｙｆｉｅｌｄｓｓｕｃｈａｓｇｅｏｌｏｇｉｃａｌａｎｄｈｙｄｒｏｇｅｏｌｏｇｉｃａｌｅｎｇｉｎｅｅｒｉｎｇ ,ｅｎｖｉｒｏｎｍｅｎｔａｌｅｎｇｉｎｅｅｒｉｎｇａｎｄｐｅｔｒｏｌｅｕｍｅｎｇｉｎｅｅｒｉｎ… 相似文献
3.
A numerical representation that explicitly represents the generalized three-dimensional anisotropy of folded fractured-sedimentary rocks in a groundwater model best reproduces the salient features of the flow system in the Shenandoah Valley, USA. This conclusion results from a comparison of four alternative representations of anisotropy in which the hydraulic-conductivity tensor represents the bedrock structure as (model A) anisotropic with variable strikes and dips, (model B) horizontally anisotropic with a uniform strike, (model C) horizontally anisotropic with variable strikes, and (model D) isotropic. Simulations using the US Geological Survey groundwater flow and transport model SUTRA are based on a representation of hydraulic conductivity that conforms to bedding planes in a three-dimensional structural model of the valley that duplicates the pattern of folded sedimentary rocks. In the most general representation, (model A), the directions of maximum and medium hydraulic conductivity conform to the strike and dip of bedding, respectively, while the minimum hydraulic-conductivity direction is perpendicular to bedding. Model A produced a physically realistic flow system that reflects the underlying bedrock structure, with a flow field that is significantly different from those produced by the other three models. 相似文献
4.
5.
为深入探究含水层中多孔介质的不规则形态和分布对于地下水流场及溶质运移的作用,根据沉积环境中已被发现的倾斜交叉分层地质单元结构,人为构造多孔介质双层交叉鱼骨结构,使其形成宏观各向异性水力传导特征,通过数值模拟研究该结构及其空间位置对于流场和溶质运移的影响。研究发现:宏观各向异性多孔介质引发了螺旋状流动,导致流线的拉伸和折叠,使得溶质羽发生不规则变形,显著提升了非反应性溶质的稀释程度;宏观各向异性结构和溶质羽在三维空间中的垂向相对位置对于溶质运移具有显著影响。 相似文献
6.
深入探究孔隙尺度下的流体流动特性和溶质运移规律对石油开采、农田养分管理、地下水污染修复有着重要意义。以人工构建的多孔介质结构和同步辐射X射线显微CT扫描的土壤团聚体(分辨率3.7μm)为研究对象,在空间节点数多达64 000 000的情况下,基于格子Boltzmann模型和GPU并行技术计算得到多孔介质流体运动和溶质运移过程的关键参数,并据此探究多孔介质空间异质性对水力学特性的影响。通过对3组不同结构的多孔介质比较发现,结构复杂程度最高的土壤样品和不规则堆叠的圆球结构的渗透率在100 mD(即10^-13m^2)量级,远低于规则堆叠的圆球结构(>20 000 mD);土壤的迂曲度为1.40~1.60,明显高于规则堆叠的圆球结构。研究结果表明,渗透率大的样品具有较小的迂曲度,这与结构的空间异质性有较强的关系;土壤的渗透率和迂曲度呈现各向异性;在水力梯度一定的前提下,渗透率较大的样品,纵向弥散系数也较大;同时,结构的异质性也会影响溶质的穿透曲线。本研究提出的模拟方法可在土壤结构中进行高效的水流运动和溶质运移模拟,可用于土壤多孔介质在孔隙尺度下的水力学特性研究。 相似文献
7.
A hydrogeological study was conducted in northwestern New Brunswick, Canada, to improve the predictability of fracture-dominated groundwater flow within folded bedrock composed of fine-grained turbidites. Borehole televiewer logging and outcrop mapping, integrated with hydraulic packer tests revealed enhanced hydraulic conductivity associated with northeasterly striking bedding-plane fractures formed during folding and flexural slip. These fractures impart azimuthal anisotropy to the aquifer because of moderately dipping fold limbs. High-angle fractures form a well-developed non-stratabound network, comprising two open fracture sets striking NNE parallel to the current direction of principal stress, and WNW parallel to the direction of principal stress that dominated during the Acadian orogeny. The subset of fractures showing significant oxidation, deemed most important to the groundwater flow system, is dominated by bedding-plane and high-angle fractures striking near-parallel to the maximum principal stress direction, resulting in extensional opening and enhanced hydraulic conductivities. An equivalent porous media model, incorporating anisotropy and varying hydraulic conductivity with depth, indicates that horizontal flow dominates the aquifer with relatively minor exchange between different model layers. These findings have implications for understanding flow directions in the Black Brook Watershed and elsewhere in the Matapédia Basin where fractures formed under similar stress conditions. 相似文献
8.
为了准确模拟由地下水开采导致渗流场和应力场发生变化而引起的地面沉降问题,根据Terzaghi有效应力原理,建立了地下水三维渗流与一维垂向固结的地下水渗流与地面沉降耦合数值模拟模型和以比奥固结理论为基础,并结合土体非线性流变理论,将土体本构关系推广到粘弹塑性,同时考虑土体力学参数及水力参数的动态变化关系的地下水渗流与地面沉降三维全耦合数值模拟模型.通过对比分析,结果表明:基于Terzaghi有效应力原理建立的地下水三维渗流与一维垂向固结地下水渗流与地面沉降耦合数值模拟模型模拟所得地面沉降与地下水位呈现出同步变化的趋势,并且当地下水位逐步回升至初始水位时,地面沉降也逐步回升到初始的零沉降状态.而以比奥固结为基础建立的地下水渗流与地面沉降三维全耦合数值模拟模型模拟所得的地面沉降变化趋势滞后于地下水位的变化趋势,并且当地下水位逐步回升至初始水位时,地面沉降虽也逐步得到回升,但回不到初始的零沉降状态,存在一个永久的残余沉降量.在土体参数变化方面,土体的孔隙度、渗透系数及泊松比均呈现先减小后增大的变化趋势,而弹性模量则呈现先增大后减小的变化趋势,与地面沉降的变化相对应. 相似文献
9.
深入探究孔隙尺度下的流体流动特性和溶质运移规律对石油开采、农田养分管理、地下水污染修复有着重要意义。以人工构建的多孔介质结构和同步辐射X射线显微CT扫描的土壤团聚体（分辨率3.7 μm）为研究对象，在空间节点数多达64 000 000的情况下，基于格子Boltzmann模型和GPU并行技术计算得到多孔介质流体运动和溶质运移过程的关键参数，并据此探究多孔介质空间异质性对水力学特性的影响。通过对3组不同结构的多孔介质比较发现，结构复杂程度最高的土壤样品和不规则堆叠的圆球结构的渗透率在100 mD（即10-13m2）量级，远低于规则堆叠的圆球结构（>20 000 mD）；土壤的迂曲度为1.40~1.60，明显高于规则堆叠的圆球结构。研究结果表明，渗透率大的样品具有较小的迂曲度，这与结构的空间异质性有较强的关系；土壤的渗透率和迂曲度呈现各向异性；在水力梯度一定的前提下，渗透率较大的样品，纵向弥散系数也较大；同时，结构的异质性也会影响溶质的穿透曲线。本研究提出的模拟方法可在土壤结构中进行高效的水流运动和溶质运移模拟，可用于土壤多孔介质在孔隙尺度下的水力学特性研究。 相似文献
10.
山东淄博市大武水源地裂隙岩溶水中污染物运移的数值研究 总被引：11，自引：0，他引：11
在分析研究淄博市大武水源地裂隙岩溶含水层的水力性质和污染物运移特征的基础上 ,对裂隙岩溶水的水头和污染物运移进行数值研究。目前国内外对裂隙岩溶水进行数值计算时 ,通常用等价多孔介质模型 ,但裂隙岩溶介质和多孔介质有很大不同。裂隙岩溶介质的储水和导水空间为裂隙网络 ,导水系数大 ,地下水的实际平均流速比孔隙水大得多 ,但给水度和贮水系数小。当用等价多孔介质模型进行模拟时应考虑这些特点。对于污染物运移的模拟 ,要同时求解水头方程和对流弥散方程 ,可采用MODFLOW和MT3D软件进行模拟。研究区裂隙岩溶水水头的数值计算表明 ,等效多孔介质模型水头的拟合误差能满足国标GB/T144 97- 93的要求。各时段地下水水量均衡计算的精度也满足要求。对流弥散方程的数值计算 ,由于Peclet数高达 95 .6 7,对流占绝对优势 ,可能存在数值弥散和数值振荡 ,因而采用多种方法进行了比较。对于同一问题 ,同时采用上游有限差分法 (UFDM) ,混合的欧拉拉格朗日方法 (特征线法MOC、改进特征线法MMOC和混合特征线法HMOC) ,总变异消减法(TVD)进行计算 ,并比较其结果。结果表明 ,混合特征线法 (HMOC)和总变异消减法 (TVD)比较适合于对流占优势的运移问题计算。由于渗透系数K和有效孔隙度θ对溶质运移结果的影响很大 ,? 相似文献
11.
Application of MODFLOW for simulating groundwater flow in the Trifilia karst aquifer, Greece 总被引：8，自引：1，他引：7
Georgios Panagopoulos 《Environmental Earth Sciences》2012,67(7):1877-1889
Karst aquifers can have a complex flow as a result of the formation of large conduits from dissolution features. As a result, a three-dimensional finite-difference groundwater flow model (equivalent porous media) may not apply as the dual porosity nature of karst features and the effects of turbulent flow cannot be directly simulated. Statistical analysis of karst hydrographs of the Trifilia aquifer in Greece showed the existence of a slightly karstified mass with high primary porosity that regulates the flow. An equivalent porous media model was developed to simulate the Trifilia karst aquifer using MODFLOW. Steady state and transient state calibration gave encouraging results for the equivalent porous media approach, which does not consider pipe flow or turbulence. Detailed hydrogeological research conducted in the area helped define the aquifer hydraulic conductivity zones and extent; and flux to/from the aquifer. Only hydraulic conductivity and specific yield were adjusted during calibration, as the flux to/from the system was considered known and applied as boundary conditions. Small mean absolute and RMS piezometric head error of the model under both steady and transient state conditions were achieved. 相似文献
12.
裂隙岩体中的渗流规律与传统多孔介质渗流规律存在本质的区别,裂隙岩体渗流具有不均匀性、各向异性和非连续性等特点,如何更好地刻画裂隙水渗流的这种特点是当前裂隙水数值模拟的热点与难点。介绍了裂隙岩体地下水渗流特性,对目前裂隙水渗流模型及其优缺点进行比较、分析,同时对主流数值计算方法和数值模拟软件进行概括介绍。 相似文献
13.
This work presents the application of a Monte Carlo simulation method to perform an statistical analysis of transient variably saturated flow in an hypothetical random porous media. For each realization of the stochastic soil parameters entering as coefficients in Richards' flow equation, the pressure head and the flow field are computed using a mixed finite element procedure for the spatial discretization combined with a backward Euler and a modified Picard iteration in time. The hybridization of the mixed method provides a novel way for evaluating hydraulic conductivity on interelement boundaries. The proposed methodology can handle both large variability and fractal structure in the hydraulic parameters. The saturated conductivity K
s and the shape parameter vg in the van Genuchten model are treated as stochastic fractal functions known as fractional Brownian motion (fBm) or fractional Gaussian noise (fGn). The statistical moments of the pressure head, water content, and flow components are obtained by averaging realizations of the fractal parameters in Monte Carlo fashion. A numerical example showing the application of the proposed methodology to characterize groundwater flow in highly heterogeneous soils is presented. 相似文献
14.
多孔介质渗透系数的空间尺度效应研究进展 总被引：6，自引：1，他引：5
多孔介质渗透系数的空间尺度问题是一个与地下流体运动和溶质运移的数值模拟密切相关的应用性课题,广泛的应用需求和新的计算方法使其成为近年的热门课题之一。它涉及到相互联系的两个方面：①非均质介质场渗透系数空间尺度行为的分析与模拟;②将局部测量尺度下的试验参数转化为数值模拟网格尺度下的参数输入值的升尺度（ｕｐｓｃａｌｉｎｇ）方法和计算模型。首先介绍了该课题在概念上的拓展及其物理含义,进而以方法为主线,对这一领域具有代表性的研究成果进行了分类和评述,讨论了该课题的研究对地下水流和溶质运移的模拟分析乃至整个多孔介质流体运动研究的意义。 相似文献
15.
离散裂隙渗流方法与裂隙化渗透介质建模 总被引：4，自引：1，他引：4
流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。 相似文献
16.
Application of multiple-point geostatistics on modelling groundwater flow and transport in a cross-bedded aquifer (Belgium) 总被引：3，自引：1，他引：2
Sedimentological processes often result in complex three-dimensional subsurface heterogeneity of hydrogeological parameter values. Variogram-based stochastic approaches are often not able to describe heterogeneity in such complex geological environments. This work shows how multiple-point geostatistics can be applied in a realistic hydrogeological application to determine the impact of complex geological heterogeneity on groundwater flow and transport. The approach is applied to a real aquifer in Belgium that exhibits a complex sedimentary heterogeneity and anisotropy. A training image is constructed based on geological and hydrogeological field data. Multiple-point statistics are borrowed from this training image to simulate hydrofacies occurrence, while intrafacies permeability variability is simulated using conventional variogram-based geostatistical methods. The simulated hydraulic conductivity realizations are used as input to a groundwater flow and transport model to investigate the effect of small-scale sedimentary heterogeneity on contaminant plume migration. Results show that small-scale sedimentary heterogeneity has a significant effect on contaminant transport in the studied aquifer. The uncertainty on the spatial facies distribution and intrafacies hydraulic conductivity distribution results in a significant uncertainty on the calculated concentration distribution. Comparison with standard variogram-based techniques shows that multiple-point geostatistics allow better reproduction of irregularly shaped low-permeability clay drapes that influence solute transport. 相似文献
17.
18.
Anisotropy and bedding effects on the hydro geological regime in a confined aquifer to design an appropriate dewatering system 总被引：1，自引：1，他引：0
A. Aryafar F. Doulati Ardejani Ph.D. 《International Journal of Environmental Science and Technology》2009,6(4):563-570
Prediction of groundwater inflow into mining excavations is very important in order to design an effective dewatering system to keep the mine workings dry and create prolonged cone of depression. The effects of anisotropy ratio and bedding on the hydraulic head and drawdown curves of a dewatering test carried out in a fully penetrating well in a confined aquifer have been investigated. An existing numerical finite element model has been used to perform the simulations. The results of the numerical model are compared to those from analytical Jacob and Lohman solution for estimating hydraulic heads and drawdown curves. It was found that the anisotropy ratio and bedding should not have a significant effect on drawdown and the quantity of inflow into a confined aquifer. It was further found that taking the simultaneous effects of anisotropy and bedding into account reduces the differences in the results of analytical and numerical methods. Comparison of the field data and model predictions showed that, the modelling results for a three layer anisotropic aquifer fit well to the field data than those results obtained for a single layer aquifer and the relative error decreased from 4.81 % to 2.98 %. 相似文献
19.
20.
多孔介质中的流动问题,与孔隙介质的特性,含水量状态以及含水量的变化历史密切相关。基于毛细循环滞回理论模型,考虑含水量变化历史对土水特征关系的影响,在开发的U-DYSAC2有限元程序中进行了相应的数值实施。在试验给定的初边值条件下进行了非饱和渗流模拟分析,并将模拟结果与实测数据比较,表明在压力边界条件反复变化下,考虑滞回效应能获得更接近实测的结果,证实该模型在模拟各种循环变化条件下非饱和土渗流初边值问题的适用性与必要性。对入渗重分布反复变化条件下非饱和土柱流动的数值模拟表明,考虑滞回与不考虑滞回条件下,含水量、孔隙水压力和湿峰的迁移的预测在入渗后的重分布过程差异较大。考虑滞回效应时,土柱上部的脱湿速率、下部的吸湿速率比不考虑滞回时要低。从而证实了非饱和多孔介质中的土水状态依赖于含水量变化,而且强烈依赖于土体的水力路径变化。因此,循环边界条件变化下,毛细滞回效应在非饱和渗流模拟中的影响显著,必须加以考虑。 相似文献