共查询到20条相似文献，搜索用时 15 毫秒
1.
In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
2.
We rederive and present the complete closed-form solutions of the displacements and stresses subjected to a point load in a transversely isotropic elastic half-space. The half-space is bounded by a horizontal surface, and the plane of transverse isotropy of the medium is parallel to the horizontal surface. The solutions are obtained by superposing the solutions of two infinite spaces, one acting a point load in its interior and the other being free loading. The Fourier and Hankel transforms in a cylindrical co-ordinate system are employed for deriving the analytical solutions. These solutions are identical with the Mindlin and Boussinesq solutions if the half-space is homogeneous, linear elastic, and isotropic. Also, the Lekhnitskii solution for a transversely isotropic half-space subjected to a vertical point load on its horizontal surface is one of these solutions. Furthermore, an illustrative example is given to show the effect of degree of rock anisotropy on the vertical surface displacement and vertical stress that are induced by a single vertical concentrated force acting on the surface. The results indicate that the displacement and stress accounted for rock anisotropy are quite different for the displacement and stress calculated from isotropic solutions. © 1998 John Wiley & Sons, Ltd. 相似文献
3.
In practical engineering, an applied rectangular area load is not often horizontally or vertically distributed but is frequently inclined at a certain angle with respect to the horizontal and vertical axes. Thus, the solutions of displacements and stresses due to such a load are essential to the design of foundations. This article yields the analytical solutions of displacements and stresses subjected to a uniform rectangular load that inclines with respect to the horizontal and vertical axes, resting on the surface of a cross‐anisotropic geomaterial. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The procedures to derive the solutions can be integrated the modified point load solutions, which are represented by several displacement and stresses elementary functions. Then, upon integrations, the displacement and stress integral functions resulting from a uniform inclined rectangular load for (1) the displacements at any depth, (2) the surface displacements, (3) the average displacements in a given layer, (4) the stresses at any depth, and (5) the average stresses in a given layer are yielded. The proposed solutions are clear and concise, and they can be employed to construct a series of calculation charts. In addition, the present solutions clarify the load inclinations, the dimensions of a loaded rectangle, and the analyzed depths, and the type and degree of geomaterial anisotropy profoundly affect the displacements and stresses in a cross‐anisotropic medium. Parametric results show that the load inclination factor should be considered when an inclined rectangular load uniformly distributed on the cross‐anisotropic material. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
4.
Summary This paper presents a simple graphical method for computing the displacement beneath/at the surface of a transversely isotropic
half-space subjected to surface loads. The surface load can be distributed on an irregularly-shaped area. The planes of transverse
isotropy are assumed to be parallel to the horizontal surface of the half-space. Based on the point load solutions presented
by the authors, four influence charts are constructed for calculating the three displacements at any point in the interior
of the half-space. Then, by setting z=0 of the derived solutions, another four influence charts for computing the surface displacements can also be proposed. These
charts are composed of unit blocks. Each unit block is bounded by two adjacent radii and arcs, and contributes the same level
of influence to the displacement. Following, a theoretical study was performed and the results showed that the charts for
interior displacements are only suitable for transversely isotropic rocks with real roots of the characteristic equation;
however, the charts for surface displacements are suitable for all transversely isotropic rocks. Finally, to demonstrate the
use of the new graphical method, an illustrative example of a layered rock subjected to a uniform, normal circular-shaped
load is given. The results from the new graphical method agree with those of analytical solutions as well. The new influence
charts can be a practical alternative to the existing analytical or numerical solutions, and provide results with reasonable
accuracy. 相似文献
5.
利用弹性矩形板与多层地基表面的竖向位移协调条件与光滑接触条件,由横观各向同性多层地基应力与位移非耦合的传递矩阵解,推导出弹性矩形板下竖向应力和位移的解析解。在此基础上,编制了相应的程序,并进行了数值计算。计算结果表明：矩形板刚度对板底竖向位移及板中心下的竖向应力有着较为显著的影响;板底竖向位移及板中心下的竖向应力随着板刚度的增加而减小,相同荷载作用下横观各向同性地基与均匀各向同性地基模型的计算结果差异较大,实际工程中很有必要采用更符合土体性质的横观各向同性地基模型 相似文献
6.
This work presents analytical solutions for displacements caused by three‐dimensional point loads in a transversely isotropic full space, in which transversely isotropic planes are inclined with respect to the horizontal loading surface. In the derivation, the triple Fourier transforms are employed toyield integral expressions of Green's displacement; then, the triple inverse Fourier transforms and residue calculus are performed to integrate the contours. The solutions herein indicate that the displacements are governed by (1) the rotation of the transversely isotropic planes (?), (2) the type and degree of material anisotropy (E/E′, ν/ν′, G/G′), (3) the geometric position (r, φ, ξ) and (4) the types of loading (Px, Py, Pz). The solutions are identical to those of Liao and Wang (Int. J. Numer. Anal. Methods Geomechanics 1998; 22 (6):425–447) if the full space is homogeneous and linearly elastic and the transversely isotropic planes are parallel to the horizontal surface. Additionally, a series of parametric study is conducted to demonstrate the presented solutions, and to elucidate the effect of the aforementioned factors on the displacements. The results demonstrate that the displacements in the infinite isotropic/transversely isotropic rocks, subjected to three‐dimensional point loads could be easily determined using the proposed solutions. Also, these solutions could realistically imitate the actual stratum of loading situations in numerous areas of engineering. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
7.
研究了横观各向同性饱和土地基在地表动力荷载作用下的三维瞬态响应。基于饱和多孔介质的三维Biot波动理论,利用Laplace变换,建立圆柱坐标系下横观各向同性饱和土的波动方程;解耦波动方程后,根据算子理论,并借助Fourier展开和Hankel变换技术,得到瞬态荷载作用下,饱和土介质的土骨架位移和应力、孔隙水相对位移和孔隙水压力的一般解;利用一般解,给出横观各向同性饱和地基在地表集中荷载激励下的瞬态Lamb问题的解答。数值算例结果表明,采用各向同性饱和介质的动力学模型,不能准确描述具有明显各向异性特性的饱和土地基的瞬态动力特性。 相似文献
8.
Cheng‐Der Wang 《国际地质力学数值与分析法杂志》2005,29(14):1341-1361
This study derives analytical solutions for estimating the lateral stress caused by horizontal and vertical surcharge strip loads resting on a cross‐anisotropic backfill. The following loading types are employed in this work: point load, line load, uniform strip load, upward linear‐varying strip load, upward nonlinear‐varying strip load, downward linear‐varying strip load and downward nonlinear‐varying strip load. The cross‐anisotropic planes are assumed to be parallel to the horizontal surface of the backfill. The solutions proposed herein have never been mentioned in previous literature, but can be derived by integrating the point load solution in a Cartesian co‐ordinate system for a cross‐anisotropic medium. The calculations by the presented solutions are quick and accurate since they are concise and systematized. Additionally, the proposed calculations demonstrate that the type and degree of material anisotropy and the horizontal/vertical loading types decisively influence the lateral stress. This investigation presents examples of the proposed horizontal and vertical strip loads acting on the surface of the isotropic and cross‐anisotropic backfills to elucidate their effects on the stress. The analytical results reveal that the stress distributions accounting for soil anisotropy and loading types are quite different from those computed from the available isotropic solutions. Restated, the derived solutions, as well as realistically simulating the actual surcharge loading circumstances, provide a good reference for the design of retaining structures for the backfill materials are cross‐anisotropic. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
9.
Cheng‐Der Wang 《国际地质力学数值与分析法杂志》2007,31(13):1443-1475
This work presents analytical solutions for determining lateral force (force per unit length) and centroid location caused by horizontal and vertical surcharge surface loads acting on a cross‐anisotropic backfill. The surcharge loading types are point load, line load, uniform strip load, upward linear‐varying strip load, upward nonlinear‐varying strip load, downward linear‐varying strip load, and downward nonlinear‐varying strip load. The planes of cross‐anisotropy are assumed parallel to the backfill ground surface. The proposed solutions, derived by integrating the lateral stress solutions (Int. J. Numer. Anal. Meth. Geomech. 2005; 29 :1341–1361), do not exist in literature. Clearly, the type and degree of material anisotropy, loading distance from the retaining wall, and loading types markedly impact the proposed solutions. Two examples are utilized to illustrate the type and degree of soil anisotropy, and the loading types on the lateral force and centroid location in the isotropic/cross‐anisotropic backfills generated by the horizontal and vertical uniform, upward linear‐varying and upward nonlinear‐varying strip loads. The parametric study results demonstrate that the lateral force and centroid location accounting for soil anisotropy, loading distance from the retaining wall, dimension of the loading strip, and loading directions and types differ significantly from those estimated using existing isotropic solutions. The derived solutions can be added to other lateral pressures, such as earth pressure or water pressure, required for stability and structural analysis of a retaining wall. Additionally, they can simulate realistically actual surcharge loading problems in geotechnical engineering when backfill materials are cross‐anisotropic. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
10.
This paper presents the closed‐form solutions for the elastic fields in two bonded rocks induced by rectangular loadings. Each of the two bonded rocks behaves as a transversely isotropic linear elastic solid of semi‐infinite extent. They are completely bonded together at a horizontal surface. The rectangular loadings are body forces along either vertical or horizontal directions and are uniformly applied on a rectangular area. The rectangular area is embedded in the two bonded rocks and is parallel to the horizontal interface. The classical integral transforms are used in the solution formulation, and the elastic solutions are expressed in the forms of elementary harmonic functions for the rectangular loadings. The stresses and displacements in the rocks induced by both the horizontal and vertical body forces are also presented. The numerical results illustrate the important effect of the anisotropic bimaterial properties on the stress and displacement fields. The solutions can be easily implemented for numerical calculations and applied to problems encountered in rock mechanics and engineering. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
11.
对横观各向同性地基上刚性矩形板进行了求解。首先,利用表面受矩形均布荷载作用下的层状横观各向同性地基的位移解答,获得地基的柔度矩阵;然后,通过刚性矩形基础与层状横观各向同性地基的协调条件,建立刚性矩形基础与横观各向同性地基共同作用的方程,进而求得基础的地基反力。通过编制相应的程序,确定了合理的网格划分值;最后,进行算例分析,分析了地基横观各向同性性质、矩形刚性基础的长宽比以及地基分层性对地基反力的影响。分析表明：以上3种因素对地基反力有重要影响。 相似文献
12.
This paper treats the dynamic response of a multilayered transversely isotropic fluid saturated poroelastic half-space under surface time-harmonic traction. The governing system of partial differential equations is uncoupled with the use of a set of physically meaningful and complete potential functions that decompose different body waves in a saturated poroelastic transversely isotropic medium. After expressing the equations in the Hankel-Fourier domain, a proper algebraic factorization is applied to generate reflection and transmission matrices for decomposed waves. All responses including displacements, stresses, and pore fluid pressure for both general patch load and point load are presented in the form of semi-infinite line integrals. The verification of the method is confirmed with the degeneration of the solutions presented here to the existing solutions for dried both homogeneous and multilayered elastic half-spaces as well as poroelastic half-space. Selected numerical results are depicted to investigate the effects of layering and pore pressure on responses of a transversely isotropic poroelastic medium. The load distribution effects are studied by comparison of the patch and point load responses. Also, resonance notion and effective parameters on this phenomenon such as layering system and anisotropy contrast are discussed. Significant influence of materials and layering configuration on number and amplitude of resonances depicted through the numerical evaluation. 相似文献
13.
横观各向同性饱和土体三维粘弹性动力分析 总被引：2，自引：2，他引：0
采用针对横观各向同性饱和土体u-w形式三维粘弹性动力方程,考虑土骨架的粘弹性性质且基于粘弹性理论,通过运用Fourier 展开、Laplace 和Hankel 积分变换方法和引入中间变量,将含有粘弹性参数的六元二阶偏微分运动控制方程组,化为2组各含4个未知变量的常微分方程组,从而给出了柱坐标系下粘弹性横观各向同性饱和土体在非轴对称动力荷载作用下的瞬态反应的土骨架位移分量、孔隙流体相对于土骨架的位移分量瞬态反应一般解。在此基础上,引入初始条件和边界条件,对垂直向和水平向动力荷载作用下半空间边值问题进行了求解。根据动力时域解答的一般解,利用Laplace和Hankel 数值逆变换技术,编制了相应的数值计算程序。并进行了实例验证和弹性、粘弹性解的对比分析。结果表明,在进行横观各向同性饱和土体动力分析时,考虑土骨架的粘弹性是必要的。 相似文献
14.
埋置简谐扭转荷载作用下广义Gibson饱和地基动力响应 总被引：1，自引：0，他引：1
考虑地基为饱和半空间,研究了广义Gibson饱和地基内作用简谐扭转动荷载时地基的动力响应问题。从Biot饱和地基固结理论出发,结合扭转振动的特点,建立了剪切模量随深度线性变化的饱和地基扭转振动的动力微分方程,通过Hankel变换求解此微分方程,给出了Hankel变换域内的切向位移和剪应力关于待定系数的表达式。根据饱和地基表面为自由表面,荷载作用面位移连续、剪应力差等于动荷载大小,波的辐射条件等边界条件求解出待定系数,借助Hankel逆变换给出地基内的位移和应力的表达式。通过数值算例研究发现:在同一水平面内,地基内的切向位移和剪应力曲线的实部和虚部都呈现出非常明显的波动变化规律;在竖向平面内,动荷载作用面上部区域内随深度逐渐增大时,地基内切向位移和剪应力曲线的实部逐渐增大,而在动荷载作用面下部区域则正好相反;扭转动荷载的影响范围主要是荷载作用面上下2倍半径区域。 相似文献
15.
This work presents analytical solutions to compute the vertical stresses for a cross‐anisotropic half‐space due to various loading types by batter piles. The loading types are an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The cross‐anisotropic planes are parallel to the horizontal ground surface. The proposed solutions can be obtained by utilizing Wang and Liao's solutions for a horizontal and vertical point load acting in the interior of a cross‐anisotropic medium. The derived cross‐anisotropic solutions using a limiting approach are in perfect agreement with the isotropic solutions of Ramiah and Chickanagappa with the consideration of pile inclination. Additionally, the present solutions are identical to the cross‐anisotropic solutions by Wang for the batter angle equals to 0. The influential factors in yielded solutions include the type and degree of geomaterial anisotropy, pile inclination, and distinct loading types. An example is illustrated to clarify the effect of aforementioned factors on the vertical stresses. The parametric results reveal that the stresses considering the geomaterial anisotropy and pile batter differ from those of previous isotropic and cross‐anisotropic solutions. Hence, it is imperative to take the pile inclination into account when piles are required to transmit both the axial and lateral loads in the cross‐anisotropic media. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
16.
This article derives the closed‐form solutions for estimating the vertical surface displacements of cross‐anisotropic media due to various loading types of batter piles. The loading types include an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The proposed solutions are never mentioned in literature and can be developed from Wang and Liao's solutions for a horizontal and vertical point load embedded in the cross‐anisotropic half‐space. The present solutions are identical with Wang's solutions when batter angle equals to 0°. In addition, the solutions indicate that the surface displacements in cross‐anisotropic media are influenced by the type and degree of material anisotropy, angle of inclination, and loading types. An illustrative example is given at the end of this article to investigate the effect of the type and degree of soil anisotropy (E/E′, G′/E′, and ν/ν′), pile inclination (α), and different loading types (a point load, a uniform skin friction, and a linear variation of skin friction) on vertical surface displacements. Results show that the displacements accounted for pile batter are quite different from those estimated from plumb piles, both driven in cross‐anisotropic media. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
17.
三维横观各向同性成层地基的传递矩阵解 总被引：1，自引：0，他引：1
通过解耦变换推导出三维直角坐标系下横观各向同性地基的非耦合状态方程;利用双重Fourier变换以及Cayley-Hamilton定理得到了单层地基的传递矩阵;结合边界条件和层间连续条件进而得其传递矩阵解。编制了相应程序并进行了数值计算与分析,结果表明：数值结果与已有文献结果十分吻合,地基的横观各向同性性质与成层性质对受荷地基中竖向位移和应力的影响较为显著。 相似文献
18.
Antonio Bobet 《Rock Mechanics and Rock Engineering》2011,44(2):149-167
Closed-form solutions for displacements and stresses of both the liner and the rock are presented for a deep circular tunnel
excavated in transversely anisotropic rock above or below the water table subjected to static or seismic loading. The solutions
are obtained with the assumption of elastic response of rock and liner, tied contact between rock and liner, impermeable liner,
plane strain conditions along the tunnel axis and simultaneous excavation, and liner installation. The liner of a tunnel placed
below the water table must support, in addition to the rock stresses, the full water pressure, while a tunnel located above
the water table must support only the rock pressures. The solutions presented for static loading show, however, that displacements
and stresses of the liner and rock are the same when the tunnel is placed above or below the water table as long as the total
far-field stresses are the same. With rapid loading, e.g. seismic loading, excess pore pressures may be generated in saturated
rock, which induce a different response than that of a tunnel excavated in dry rock. The analyses indicate that stresses and
displacements are more uniform when excess pore pressures are produced, which seems to indicate that pore pressure generation
tends to reduce non-uniform response in anisotropic rock. 相似文献
19.
Stresses and displacements in an elastic mass due to distributed loading by discretization technique
Numerical solutions have been obtained for stresses and displacements in a linear elastic half space due to distributed loads of circular, rectangular and elliptical shapes. The technique primarily involves use of a multi-dimensional numerical integration technique to integrate point load solutions over the distributed loading after discretizing the area into a finite number of elements. Both uniform vertical and shear loads have been considered as well as vertical conical loads and inward shear loads. The technique evolved facilitates the determination of stresses and displacements by the use of mini-computers and is neither as tedious and cumbersome as the use of tables and charts nor as costly as FEM solutions. A detailed comparison has been presented between the results obtained by the numerical solutions and those of the existing analytical solutions wherever they are available. It is found that the agreement between the two is within one per cent for displacements at all depths for the different cases studied. The matching is also good in the case of stresses, except at shallow depths. 相似文献
20.
在考虑横观各向同性含液饱和多孔介质固体骨架和流体可压缩性以及固体骨架的黏弹性特征下,基于横观各向同性含液饱和多孔介质u-w形式的三维动力控制方程,以固相位移u、液相相对位移w为基本未知量,综合运用Laplace变换、双重Fourier变换等方法,在直角坐标系下通过引入中间变量,将六元2阶动力控制方程组化为两组各含4个未知变量的常微分方程组,给出了直角坐标系下横观各向同性含液饱和多孔介质三维黏弹性动力反应的积分形式一般解;作为理论推导的验证,通过引入初始条件和边界条件,对横观各向同性含液饱和多孔介质半空间黏弹性瞬态反应问题进行了求解。解答的退化验证表明,所推导的理论解是正确的。 相似文献