共查询到20条相似文献，搜索用时 15 毫秒
1.
Cheng‐Der Wang 《国际地质力学数值与分析法杂志》2007,31(13):1443-1475
This work presents analytical solutions for determining lateral force (force per unit length) and centroid location caused by horizontal and vertical surcharge surface loads acting on a cross‐anisotropic backfill. The surcharge loading types are point load, line load, uniform strip load, upward linear‐varying strip load, upward nonlinear‐varying strip load, downward linear‐varying strip load, and downward nonlinear‐varying strip load. The planes of cross‐anisotropy are assumed parallel to the backfill ground surface. The proposed solutions, derived by integrating the lateral stress solutions (Int. J. Numer. Anal. Meth. Geomech. 2005; 29 :1341–1361), do not exist in literature. Clearly, the type and degree of material anisotropy, loading distance from the retaining wall, and loading types markedly impact the proposed solutions. Two examples are utilized to illustrate the type and degree of soil anisotropy, and the loading types on the lateral force and centroid location in the isotropic/cross‐anisotropic backfills generated by the horizontal and vertical uniform, upward linear‐varying and upward nonlinear‐varying strip loads. The parametric study results demonstrate that the lateral force and centroid location accounting for soil anisotropy, loading distance from the retaining wall, dimension of the loading strip, and loading directions and types differ significantly from those estimated using existing isotropic solutions. The derived solutions can be added to other lateral pressures, such as earth pressure or water pressure, required for stability and structural analysis of a retaining wall. Additionally, they can simulate realistically actual surcharge loading problems in geotechnical engineering when backfill materials are cross‐anisotropic. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
2.
This work presents analytical solutions to compute the vertical stresses for a cross‐anisotropic half‐space due to various loading types by batter piles. The loading types are an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The cross‐anisotropic planes are parallel to the horizontal ground surface. The proposed solutions can be obtained by utilizing Wang and Liao's solutions for a horizontal and vertical point load acting in the interior of a cross‐anisotropic medium. The derived cross‐anisotropic solutions using a limiting approach are in perfect agreement with the isotropic solutions of Ramiah and Chickanagappa with the consideration of pile inclination. Additionally, the present solutions are identical to the cross‐anisotropic solutions by Wang for the batter angle equals to 0. The influential factors in yielded solutions include the type and degree of geomaterial anisotropy, pile inclination, and distinct loading types. An example is illustrated to clarify the effect of aforementioned factors on the vertical stresses. The parametric results reveal that the stresses considering the geomaterial anisotropy and pile batter differ from those of previous isotropic and cross‐anisotropic solutions. Hence, it is imperative to take the pile inclination into account when piles are required to transmit both the axial and lateral loads in the cross‐anisotropic media. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
3.
In this article, we present the solutions for the stresses induced by four different loads associated with an axially loaded pile in a continuously inhomogeneous cross‐anisotropic half‐space. The planes of cross‐anisotropy are parallel to the horizontal surface of the half‐space, and the Young's and shear moduli are assumed to vary exponentially with depth. The four loading types are: an embedded point load for an end‐bearing pile, uniform skin friction, linear variation of skin friction, and non‐linear parabolic variation of skin friction for a friction pile. The solutions for the stresses due to the pile load are expressed in terms of the Hankel integral and are obtained from the point load solutions of the same inhomogeneous cross‐anisotropic half‐space which were derived recently by the authors (Int. J. Rock Mech. Min. Sci. 2003; 40 (5):667–685). A numerical procedure is proposed to carry out the integral. For the special case of homogeneous isotropic and cross‐anisotropic half‐space, the stresses predicted by the numerical procedure agree well with the solutions of Geddes and Wang (Geotechnique 1966; 16 (3):231–255; Soils Found. 2003; 43 (5):41–52). An illustrative example is also given to investigate the effect of soil inhomogeneity, the type and degree of soil anisotropy, and the four different loading types on the vertical normal stress. The presented solutions are more realistic in simulating the actual stratum of loading problem in many areas of engineering practice. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
4.
In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
5.
This article derives the closed‐form solutions for estimating the vertical surface displacements of cross‐anisotropic media due to various loading types of batter piles. The loading types include an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The proposed solutions are never mentioned in literature and can be developed from Wang and Liao's solutions for a horizontal and vertical point load embedded in the cross‐anisotropic half‐space. The present solutions are identical with Wang's solutions when batter angle equals to 0°. In addition, the solutions indicate that the surface displacements in cross‐anisotropic media are influenced by the type and degree of material anisotropy, angle of inclination, and loading types. An illustrative example is given at the end of this article to investigate the effect of the type and degree of soil anisotropy (E/E′, G′/E′, and ν/ν′), pile inclination (α), and different loading types (a point load, a uniform skin friction, and a linear variation of skin friction) on vertical surface displacements. Results show that the displacements accounted for pile batter are quite different from those estimated from plumb piles, both driven in cross‐anisotropic media. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
6.
Elastic closed-form solutions for the displacements and stresses in a transversely isotropic half-space subjected to various buried loading types are presented. The loading types include finite line loads and asymmetric loads (such as uniform and linearly varying rectangular loads, or trapezoidal loads). The planes of transverse isotropy are assumed to be parallel to its horizontal surface. These solutions are directly obtained from integrating the point load solutions in a transversely isotropic half-space, which were derived using the principle of superposition, Fourier and Hankel transformation techniques. The solutions for the displacements and stresses in transversely isotropic half-spaces subjected to linearly variable loads on a rectangular region are never mentioned in literature. These exact solutions indicate that the displacements and stresses are influenced by several factors, such as the buried depth, the loading types, and the degree and type of rock anisotropy. Two illustrative examples, a vertical uniform and a vertical linearly varying rectangular load acting on the surface of transversely isotropic rock masses, are presented to show the effect of various parameters on the vertical surface displacement and vertical stress. The results indicate that the displacement and stress distributions accounted for rock anisotropy are quite different for those calculated from isotropic solutions. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
7.
In practical engineering, an applied rectangular area load is not often horizontally or vertically distributed but is frequently inclined at a certain angle with respect to the horizontal and vertical axes. Thus, the solutions of displacements and stresses due to such a load are essential to the design of foundations. This article yields the analytical solutions of displacements and stresses subjected to a uniform rectangular load that inclines with respect to the horizontal and vertical axes, resting on the surface of a cross‐anisotropic geomaterial. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The procedures to derive the solutions can be integrated the modified point load solutions, which are represented by several displacement and stresses elementary functions. Then, upon integrations, the displacement and stress integral functions resulting from a uniform inclined rectangular load for (1) the displacements at any depth, (2) the surface displacements, (3) the average displacements in a given layer, (4) the stresses at any depth, and (5) the average stresses in a given layer are yielded. The proposed solutions are clear and concise, and they can be employed to construct a series of calculation charts. In addition, the present solutions clarify the load inclinations, the dimensions of a loaded rectangle, and the analyzed depths, and the type and degree of geomaterial anisotropy profoundly affect the displacements and stresses in a cross‐anisotropic medium. Parametric results show that the load inclination factor should be considered when an inclined rectangular load uniformly distributed on the cross‐anisotropic material. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
8.
We rederive and present the complete closed-form solutions of the displacements and stresses subjected to a point load in a transversely isotropic elastic half-space. The half-space is bounded by a horizontal surface, and the plane of transverse isotropy of the medium is parallel to the horizontal surface. The solutions are obtained by superposing the solutions of two infinite spaces, one acting a point load in its interior and the other being free loading. The Fourier and Hankel transforms in a cylindrical co-ordinate system are employed for deriving the analytical solutions. These solutions are identical with the Mindlin and Boussinesq solutions if the half-space is homogeneous, linear elastic, and isotropic. Also, the Lekhnitskii solution for a transversely isotropic half-space subjected to a vertical point load on its horizontal surface is one of these solutions. Furthermore, an illustrative example is given to show the effect of degree of rock anisotropy on the vertical surface displacement and vertical stress that are induced by a single vertical concentrated force acting on the surface. The results indicate that the displacement and stress accounted for rock anisotropy are quite different for the displacement and stress calculated from isotropic solutions. © 1998 John Wiley & Sons, Ltd. 相似文献
9.
Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
10.
Existing solutions to Mandel's problem focus on isotropic, transversely isotropic, and orthotropic materials, the last two of which have one of the material symmetry axes coincide with the vertical loading direction. The classical plane strain condition holds for all these cases. In this work, analytical solution to Mandel's problem with the most general matrix anisotropy is presented. This newly derived analytical solution for fully anisotropic materials has all the three nonzero shear strains. Warping occurs in the cross sections, and a generalized plane strain condition is fulfilled. This solution can be applied to transversely isotropic and orthotropic materials whose material symmetry axes are not aligned with the vertical loading direction. It is the first analytical poroelastic solution considering mechanical general anisotropy of elasticity. The solution captures the effects of material anisotropy and the deviation of the material symmetry axes from the vertical loading direction on the responses of pore pressure, stress, strain, and displacement. It can be used to match, calibrate, and simulate experimental results to estimate anisotropic poromechanical parameters. This generalized solution is capable of reproducing the existing solutions as special cases. As an application, the solution is used to study the responses of transversely isotropic and orthotropic materials whose symmetry axes are not aligned with the vertical loading direction. Examples on anisotropic shale rocks show that the effects of material anisotropy are significant. Mandel-Cryer's effects are highly impacted by the degree of material anisotropy and the deviation of the material symmetry axes from the vertical loading direction. 相似文献
11.
An anisotropic geomechanical model for jointed rock mass is presented. Simultaneously with deriving the orthotropic anisotropy elastic parameters along the positive axis, the equivalent compliance matrix for the deflection axis orthotropic anisotropy was derived through a three-dimensional coordinate transformation. In addition, Singh’s analysis of the stress concentration effects of intermittent joints was adopted, based on two groups of intermittent joints and a set of cross-cutting joints in the jointed rock mass. The stress concentration effects caused by intermittent joints and the coupling effect of cross-cutting joints along the deflection-axis are also considered. The proposed anisotropic mechanics parameters method is applied to determine the deformation parameters of jointed granite at the Taishan Nuclear Power Station. Combined with the deterministic mechanical parameters of rock blocks and joints, the deformation parameters and their variability in jointed rock masses are estimated quantitatively. The computed results show that jointed granite at the Taishan Nuclear Power Station exhibits typical anisotropic mechanical characteristics; the elastic moduli in the two horizontal directions were similar, but the elastic modulus in the vertical direction was much greater. Jointed rock elastic moduli in the two horizontal and vertical directions were respectively about 24% and 37% of the core of rock, showing weakly orthotropic anisotropy; the ratio of elastic moduli in the vertical and horizontal directions was 1.53, clearly indicating the transversely isotropic rock mass mechanical characteristics. The method can be popularized to solve other rock mechanics problems in nuclear power engineering. 相似文献
12.
The effect of inclined loading on the bearing capacity of foundations on horizontal ground surface is well established and both the exact solution and simpler empirical equations are available for the calculation of the failure loads. However, for footings on or near slopes complete solutions are available only for vertical loading. This paper investigates the influence of inclined loading on the horizontal and vertical failure loads. The finite element, upper bound plasticity and stress field methods are used to examine a wide range of geometries and soil properties. The methods are first validated against known solutions for two special cases and are subsequently employed to investigate the effect of the geometrical and material properties on the failure loads and the bearing capacity load interaction diagram. Based on this investigation an empirical equation is proposed for the load interaction diagram for undrained inclined loading of footings on or near slopes. 相似文献
13.
P. H. Morris 《国际地质力学数值与分析法杂志》2005,29(2):127-140
Analytical solutions are presented for linear finite‐strain one‐dimensional consolidation of initially unconsolidated soil layers with surcharge loading for both one‐ and two‐way drainage. These solutions complement earlier solutions for initially unconsolidated soil layers without surcharge and initially normally consolidated soil layers with surcharge. Small‐strain solutions for the consolidation of initially unconsolidated soil layers with surcharge loading are also presented, and the relationship between the earlier solutions for initially unconsolidated soil without surcharge and the corresponding small‐strain solutions, which was not addressed in the earlier work, is clarified. The new solutions for initially unconsolidated soil with surcharge loading can be applied to the analysis of low stress consolidation tests and to the partial validation of numerical solutions of non‐linear finite‐strain consolidation. They also clarify a formerly perplexing aspect of finite‐strain solution charts first noted in numerical solutions. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
14.
A rotational kinematic hardening constitutive model with the capability of predicting the behavior of soil during three‐dimensional stress reversals has been developed. An existing elasto‐plastic constitutive model, the Single Hardening Model, utilizing isotropic hardening serves as the basic framework in these formulations. The framework of the kinematic hardening model was discussed in a companion paper. The previously proposed cross‐anisotropic Single Hardening Model is added to the present kinematic hardening mechanism to capture inherent anisotropy of sands in addition to the stress reversals. This model involves 13 parameters, which can be determined from simple laboratory experiments, such as isotropic compression, drained triaxial compression and triaxial extension tests. The results from a series of true triaxial tests with large three‐dimensional stress reversals performed on medium dense cross‐anisotropic Santa Monica Beach sand are employed for comparison with predictions. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
Abderrahim Houmat 《国际地质力学数值与分析法杂志》2013,37(11):1552-1573
A method is presented for coupling cubic‐order quadrilateral finite elements with the finite side of a new coordinate ascent hierarchical infinite element. At a common side shared by a hierarchical infinite element and an arbitrary number of finite elements, the displacements are minimized in the least square sense with respect to the degrees‐of‐freedom of the finite elements. This leads to a set of equations that relate the degrees‐of‐freedom of the finite and hierarchical infinite elements on the shared side. The method is applied to a non‐homogeneous cross‐anisotropic half‐space subjected to a non‐uniform circular loading with Young's and shear moduli varying with depth according to the power law. A constant mesh constructed from coupled finite and hierarchical infinite elements is used and convergence is sought simply by increasing the degree of the interpolating polynomial. The displacements and stresses produced by conical and parabolic circular loads applied on the surface are obtained. The efficiency of the proposed method is demonstrated through convergence and comparison studies. New results produced by a frusto‐conical circular load applied on the surface of a half‐space made up of heavily consolidated London clay are provided. The non‐homogeneity parameter and degree of anisotropy are shown to influence the soil response. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
16.
Egor V. Dontsov 《国际地质力学数值与分析法杂志》2019,43(2):519-529
This study investigates parametric space of solutions for a planar hydraulic fracture propagating in a homogeneous anisotropic rock. It is assumed that the fracture has an elliptical shape and is driven by a power-law fluid. The purpose of this study is to investigate the influence of anisotropy and power-law fluid rheology on the parametric space of solutions. Rock anisotropy is represented by having two values of fracture toughness, one in the vertical direction and another one in the horizontal direction. Similarly, the effect of elastic anisotropy is approximated by using two different effective elastic moduli in the vertical and horizontal directions. In contrast to the isotropic case, for which there are four limiting solutions, the problem for anisotropic rocks features six different limiting cases. These cases represent competition between toughness and viscosity in the vertical and horizontal directions and competition between fluid storage inside the fracture and fluid leak-off into formation. Approximate expressions for the limiting solutions are obtained using global volume balance and tip asymptotic solutions. Despite the developed solutions rely on a series of approximations, they precisely capture all the scaling laws associated with the problem. Zones of applicability of these limiting solutions are calculated, and their dependence on the problem parameters is investigated. 相似文献
17.
Gravity-induced stresses in stratified rock masses 总被引：1，自引：1，他引：1
Bernard Amadei Henri S. Swolfs William Z. Savage 《Rock Mechanics and Rock Engineering》1988,21(1):1-20
Summary This paper presents closed-form solutions for the stress field induced by gravity in anisotropic and stratified rock masses. These rocks are assumed to be laterally restrained. The rock mass consists of finite mechanical units, each unit being modeled as a homogeneous, transversely isotropic or isotropic linearly elastic material. The following results are found. The nature of the gravity induced stress field in a stratified rock mass depends on the elastic properties of each rock unit and how these properties vary with depth. It is thermodynamically admissible for the induced horizontal stress component in a given stratified rock mass to exceed the vertical stress component in certain units and to be smaller in other units; this is not possible for the classical unstratified isotropic solution. Examples are presented to explore the nature of the gravity induced stress field in stratified rock masses. It is found that a decrease in rock mass anisotropy and a stiffening of rock masses with depth can generate stress distributions comparable to empirical hyperbolic distributions previously proposed in the literature. 相似文献
18.
This work presents analytical solutions for displacements caused by three‐dimensional point loads in a transversely isotropic full space, in which transversely isotropic planes are inclined with respect to the horizontal loading surface. In the derivation, the triple Fourier transforms are employed toyield integral expressions of Green's displacement; then, the triple inverse Fourier transforms and residue calculus are performed to integrate the contours. The solutions herein indicate that the displacements are governed by (1) the rotation of the transversely isotropic planes (?), (2) the type and degree of material anisotropy (E/E′, ν/ν′, G/G′), (3) the geometric position (r, φ, ξ) and (4) the types of loading (Px, Py, Pz). The solutions are identical to those of Liao and Wang (Int. J. Numer. Anal. Methods Geomechanics 1998; 22 (6):425–447) if the full space is homogeneous and linearly elastic and the transversely isotropic planes are parallel to the horizontal surface. Additionally, a series of parametric study is conducted to demonstrate the presented solutions, and to elucidate the effect of the aforementioned factors on the displacements. The results demonstrate that the displacements in the infinite isotropic/transversely isotropic rocks, subjected to three‐dimensional point loads could be easily determined using the proposed solutions. Also, these solutions could realistically imitate the actual stratum of loading situations in numerous areas of engineering. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
19.
A closed form analytical solution for two‐dimensional plane strain consolidation of unsaturated soil stratum 
下载免费PDF全文
下载免费PDF全文 This paper discusses the excess pore‐air and pore‐water pressure dissipations and the average degree of consolidation in the 2D plane strain consolidation of an unsaturated soil stratum using eigenfunction expansion and Laplace transformation techniques. In this study, the application of a constant external loading on a soil surface is assumed to immediately generate uniformly or linearly distributed initial excess pore pressures. The general solutions consisting of eigenfunctions and eigenvalues are first proposed. The Laplace transform is then applied to convert the time variable t in partial differential equations into the Laplace complex argument s. Once the domain is obtained, a simplified set of equations with variable s can be achieved. The final analytical solutions can be computed by taking a Laplace inverse. The proposed equations predict the two‐dimensional consolidation behaviour of an unsaturated soil stratum capturing the uniformly and linearly distributed initial excess pore pressures. This study investigates the effects of isotropic and anisotropic permeability conditions on variations of excess pore pressures and the average degree of consolidation. Additionally, isochrones of excess pore pressures along vertical and horizontal directions are presented. It is found that the initial distribution of pore pressures, varying with depth, results in considerable effects on the pore‐water pressure dissipation rate whilst it has insignificant effects on the excess pore‐air pressure dissipation rate. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
20.
This paper presents the closed‐form solutions for the elastic fields in two bonded rocks induced by rectangular loadings. Each of the two bonded rocks behaves as a transversely isotropic linear elastic solid of semi‐infinite extent. They are completely bonded together at a horizontal surface. The rectangular loadings are body forces along either vertical or horizontal directions and are uniformly applied on a rectangular area. The rectangular area is embedded in the two bonded rocks and is parallel to the horizontal interface. The classical integral transforms are used in the solution formulation, and the elastic solutions are expressed in the forms of elementary harmonic functions for the rectangular loadings. The stresses and displacements in the rocks induced by both the horizontal and vertical body forces are also presented. The numerical results illustrate the important effect of the anisotropic bimaterial properties on the stress and displacement fields. The solutions can be easily implemented for numerical calculations and applied to problems encountered in rock mechanics and engineering. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献