首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 588 毫秒
1.
Arsenic and Sb are common mine-water pollutants and their toxicity and fate are strongly influenced by redox processes. In this study, simultaneous Fe(II), As(III) and Sb(III) oxidation experiments were conducted to obtain rates under laboratory conditions similar to those found in the field for mine waters of both low and circumneutral pH. Additional experiments were performed under abiotic sterile conditions to determine the biotic and abiotic contributions to the oxidation processes. The results showed that under abiotic conditions in aerated Fe(III)–H2SO4 solutions, Sb(III) oxidizes slightly faster than As(III). The oxidation rates of both elements were accelerated by increasing As(III), Sb(III), Fe(III), and Cl− concentrations in the presence of light. For unfiltered circumneutral water from the Giant Mine (Yellowknife, NWT, Canada), As(III) oxidized at 15–78 μmol/L/h whereas Sb(III) oxidized at 0.03–0.05 μmol/L/h during microbial exponential growth. In contrast, As(III) and Sb(III) oxidation rates of 0.01–0.03 and 0.01–0.02 μmol/L/h, respectively, were obtained in experiments performed with acid unfiltered mine waters from the Iberian Pyritic Belt (SW Spain). These results suggest that the Fe(III) formed from microbial oxidation abiotically oxidized As(III) and Sb(III). After sterile filtration of both mine water samples, neither As(III), Sb(III), nor Fe(II) oxidation was observed. Hence, under the experimental conditions, bacteria were catalyzing As and Sb oxidation in the Giant Mine waters and Fe oxidation in the acid waters of the Iberian Pyrite Belt.  相似文献   

2.
Lacustrine sediments, submerged tailings, and their pore waters have been collected at several sites in Yellowknife Bay, Great Slave Lake, Canada, in order to investigate the biogeochemical controls on the remobilization of As from mining-impacted materials under different depositional conditions. Radiometric dating confirms that a mid-core enrichment of Pb, Zn, Cu and Sb corresponds to the opening of a large Au mine 60 a ago. This was evident even in a relatively remote site. Arsenic was enriched at mid-core, coincident with mining activity, but clearly exhibited post-depositional mobility, migrating upwards towards the sediment water interface (SWI) as well as down-core. Deep-water (15 m) Yellowknife Bay sediments that contain buried mine waste are suboxic, relatively organic-rich and abundant in microbes with As in pore waters and sediments reaching 585 μg/L and 1310 mg/kg, respectively. Late summer pore waters show equal proportions of As(III) and As(V) (16–415 μg/L) whereas late winter pore waters are dominated by As(III) (284–947 μg/L). This can be explained by As(III) desorption mechanisms associated with the conversion of FeS to FeS2 and the reduction of As(V) to As(III) through the oxidation of dissolved sulfide, both microbially-mediated processes. Processes affecting As cycling involve the attenuating efficiency of the oxic zone at the SWI, sediment redox heterogeneity and the reductive dissolution of Fe(hydr)oxides by labile organic matter, temporarily and spatially variable.  相似文献   

3.
The Bralorne and Pioneer mines, now inactive, produced over 4 million ounces of Au from an orogenic lode Au deposit located on the eastern edge of the Coastal Mountains of SW British Columbia. Between 2007 and 2009, drainage from a recently developed exploration adit was investigated in order to better understand and anticipate potential environmental management issues associated with the development of this type of deposit in the future. Portal discharge rate and specific conductance were monitored continuously over a 14-month period during which 36 water samples were collected. Additional samples were collected from flooded workings within the adit. Concentrations of As and Sb at the portal range as high as 1738 and 316 μg/L, respectively, while those in the mine pool reach 3304 and 349 μg/L, respectively. Effluent chemistry is mildly alkaline (pH = 8.7) and is dominated by Na, Ca, Mg, HCO3 and SO4. Geochemical inverse modeling of effluent composition indicates weathering of albite (2515 kg/a), ferroan dolomite (718 kg/a), pyrite (456 kg/a), arsenopyrite (23 kg/a) and stibnite (2 kg/a). Modeled sulfide reaction coefficients, normalized by their corresponding host rock concentrations, suggest that oxidation of arsenopyrite is 25 times slower than that of pyrite whereas oxidation of stibnite is 1.5 times faster. Oxidative dissolution of arsenopyrite and stibnite releases 10.6 kg/a of As and 1.1 kg/a of Sb of which 57% and 46%, respectively, are sorbed to ferrihydrite and gibbsite on the bed of the shallow channel through which the mine pool drains to the portal. Although mass balance calculations predict the formation of sufficient ferrihydrite to sorb 100% of the As dissolved in the mine pool, this attenuation process was ineffective possibly because the precipitated sorbents settled to the bottom of the water column or because of competition for sorption sites from Ca and HCO3. The dissolved Sb/As molar ratio in portal effluent (0.082) is much greater than the Sb/As ratio of the mineralization (0.002) because of slower arsenopyrite oxidation and somewhat lesser sorption of Sb.  相似文献   

4.
Environmental contamination with As and Sb caused by past mining activities at Sb mines is a significant problem in Slovakia. This study is focused on the environmental effects of the 5 abandoned Sb mines on water, stream sediment and soil since the mines are situated in the close vicinity of residential areas. Samples of mine wastes, various types of waters, stream sediments, soils, and leachates of the mine wastes, stream sediments and selected soils were analyzed for As and Sb to evaluate their geochemical dispersion from the mines. Mine wastes collected at the mine sites contained up to 5166 mg/kg As and 9861 mg/kg Sb. Arsenic in mine wastes was associated mostly with Fe oxides, whereas Sb was present frequently in the form of individual Sb, Sb(Fe) and Fe(Sb) oxides. Waters of different types such as groundwater, surface waters and mine waters, all contained elevated concentrations of As and Sb, reaching up to 2150 μg/L As and 9300 μg/L Sb, and had circum-neutral pH values because of the buffering capacity of abundant Ca- and Mg-carbonates. The concentrations of Sb in several household wells are a cause for concern, exceeding the Sb drinking water limit of 5 μg/L by as much as 25 times. Some attenuation of the As and Sb concentrations in mine and impoundment waters was expected because of the deposition of metalloids onto hydrous ferric oxides built up below adit entrances and impoundment discharges. These HFOs contained >20 wt.% As and 1.5 wt.% Sb. Stream sediments and soils have also been contaminated by As and Sb with the peak concentrations generally found near open adits and mine wastes. In addition to the discharged waters from open adits, the significant source of As and Sb contamination are waste-rock dumps and tailings impoundments. Leachates from mine wastes contained as much as 8400 μg/L As and 4060 μg/L Sb, suggesting that the mine wastes would have a great potential to contaminate the downstream environment. Moreover, the results of water leaching tests showed that Sb was released from the solids more efficiently than As under oxidizing conditions. This might partly explain the predominance of Sb over As in most water samples.  相似文献   

5.
Mining residues from the Sb mine of Bournac in the upper Orb River valley (Southern France), constitute an important source of As and Sb pollution. Arsenic concentrations are as high as 78 μg/L and Sb reaches 32 μg/L in the small creek draining the tailings impoundment. Although both metalloids occur mainly in oxidized form in the creek water, their behaviour differs significantly. Iron oxides are the main carrier phases for both elements in the suspended particulate matter. In oxic conditions the two elements are mainly present in water in oxidised form As(V) and Sb(V) and both field studies and laboratory experiments indicate a higher affinity of As(V) than Sb(V) for the solid phase. In the pool, which receives the water from Bournac Creek, the reductive dissolution of Fe-oxides is linked to the oxidation of small pyrite grains transported from the tailings dump. In oxic conditions Sb is released to solution more efficiently than As. Conversely, in anoxic conditions, mobilisation of As is greater than that of Sb. This is attributed to the reduction of As, which favours its mobility. Whatever the conditions, the activity of bacteria naturally present in the sediments enhances the remobilization of Sb in oxidizing conditions and that of As in reducing conditions.  相似文献   

6.
Waters from abandoned Sb-Au mining areas have higher Sb (up to 2138 μg L−1), As (up to 1252 μg L−1) and lower Al, Zn, Li, Ni and Co concentrations than those of waters from the As-Au mining area of Banjas, which only contain up to 64 μg L−1 As. In general, Sb occurs mainly as SbO3− and As H2AsO4−. In general, waters from old Sb-Au mining areas are contaminated in Sb, As, Al, Fe, Cd, Mn, Ni and NO2−, whereas those from the abandoned As-Au mining area are contaminated in Al, Fe, Mn, Ni, Cd and rarely in NO2−. Waters from the latter area, immediately downstream of mine dumps are also contaminated in As. In stream sediments from Sb-Au and As-Au mining areas, Sb (up to 5488 mg kg−1) and As (up to 235 mg kg−1) show a similar behaviour and are mainly associated with the residual fraction. In most stream sediments, the As and Sb are not associated with the oxidizable fraction, while Fe is associated with organic matter, indicating that sulphides (mainly arsenopyrite and pyrite) and sulphosalts containing those metalloids and metal are weathered. Arsenic and Sb are mainly associated with clay minerals (chlorite and mica; vermiculite in stream sediments from old Sb-Au mining areas) and probably also with insoluble Sb phases of stream sediments. In the most contaminated stream sediments, metalloids are also associated with Fe phases (hematite and goethite, and also lepidocrocite in stream sediments from Banjas). Moreover, the most contaminated stream sediments correspond to the most contaminated waters, reflecting the limited capacity of stream sediments to retain metals and metalloids.  相似文献   

7.
Naturally occurring pyrite commonly contains minor substituted metals and metalloids (As, Se, Hg, Cu, Ni, etc.) that can be released to the environment as a result of its weathering. Arsenic, often the most abundant minor constituent in pyrite, is a sensitive monitor of progressive pyrite oxidation in coal. To test the effect of pyrite composition and environmental parameters on the rate and extent of pyrite oxidation in coal, splits of five bituminous coal samples having differing amounts of pyrite and extents of As substitution in the pyrite, were exposed to a range of simulated weathering conditions over a period of 17 months. Samples investigated include a Springfield coal from Indiana (whole coal pyritic S = 2.13 wt.%; As in pyrite = detection limit (d.l.) to 0.06 wt.%), two Pittsburgh coal samples from West Virginia (pyritic S = 1.32–1.58 wt.%; As in pyrite = d.l. to 0.34 wt.%), and two samples from the Warrior Basin, Alabama (pyritic S = 0.26–0.27 wt.%; As in pyrite = d.l. to 2.72 wt.%). Samples were collected from active mine faces, and expected differences in the concentration of As in pyrite were confirmed by electron microprobe analysis. Experimental weathering conditions in test chambers were maintained as follows: (1) dry Ar atmosphere; (2) dry O2 atmosphere; (3) room atmosphere (relative humidity ∼20–60%); and (4) room atmosphere with samples wetted periodically with double-distilled water. Sample splits were removed after one month, nine months, and 17 months to monitor the extent of As and Fe oxidation using As X-ray absorption near-edge structure (XANES) spectroscopy and 57Fe Mössbauer spectroscopy, respectively. Arsenic XANES spectroscopy shows progressive oxidation of pyritic As to arsenate, with wetted samples showing the most rapid oxidation. 57Fe Mössbauer spectroscopy also shows a much greater proportion of Fe3+ forms (jarosite, Fe3+ sulfate, FeOOH) for samples stored under wet conditions, but much less difference among samples stored under dry conditions in different atmospheres. The air-wet experiments show evidence of pyrite re-precipitation from soluble ferric sulfates, with As retention in the jarosite phase. Extents of As and Fe oxidation were similar for samples having differing As substitution in pyrite, suggesting that environmental conditions outweigh the composition and amount of pyrite as factors influencing the oxidation rate of Fe sulfides in coal.  相似文献   

8.
Weathering of mine tailings have resulted in high As concentrations in water (up to 2900 μg l− 1) and sediment (up to 900 mg kg− 1) samples around the Adak mine. Notably, As occurs as As(III) species (15–85%) in the oxic surface and ground water samples, which is not common. Time-series based sediment incubations were set up in the laboratory with contaminated sediments to study the microbial processes involved in transformation and remobilization of As across the sediment–water interface. The microcosm experiments indicate that microorganisms are capable of surviving in As-rich sediments and reduce As(V) to As(III). A decrease in total As concentration in sediments is coupled to an increase in As(III) concentration in the aqueous media. In contrast, the controls (treated with HgCl2 and formaldehyde) did not show growth, and As(V) concentrations increased steadily in the sediments and aqueous medium. The results imply that active metabolism is necessary for As(V) reduction. These microorganisms possess reduction mechanisms that are not necessarily coupled to respiration, but most likely impart resistance to As toxicity.  相似文献   

9.
The oxidation of sulfide-rich rocks, mostly leftover debris from Cu mining in the early 20th century, is contributing to metal contamination of local coastal environments in Prince William Sound, Alaska. Analyses of sulfide, water, sediment, precipitate and biological samples from the Beatson, Ellamar, and Threeman mine sites show that acidic surface waters generated from sulfide weathering are pathways for redistribution of environmentally important elements into and beyond the intertidal zone at each site. Volcanogenic massive sulfide deposits composed of pyrrhotite and (or) pyrite + chalcopyrite + sphalerite with subordinate galena, arsenopyrite, and cobaltite represent potent sources of Cu, Zn, Pb, As, Co, Cd, and Hg. The resistance to oxidation among the major sulfides increases in the order pyrrhotite ? sphalerite < chalcopyrite ? pyrite; thus, pyrrhotite-rich rocks are typically more oxidized than those dominated by pyrite. The pervasive alteration of pyrrhotite begins with rim replacement by marcasite followed by replacement of the core by sulfur, Fe sulfate, and Fe–Al sulfate. The oxi dation of chalcopyrite and pyrite involves an encroachment by colloform Fe oxyhydroxides at grain margins and along crosscutting cracks that gradually consumes the entire grain. The complete oxidation of sulfide-rich samples results in a porous aggregate of goethite, lepidocrocite and amorphous Fe-oxyhydroxide enclosing hydrothermal and sedimentary silicates. An inverse correlation between pH and metal concentrations is evident in water data from all three sites. Among all waters sampled, pore waters from Ellamar beach gravels have the lowest pH (∼3) and highest concentrations of base metals (to ∼25,000 μg/L), which result from oxidation of abundant sulfide-rich debris in the sediment. High levels of dissolved Hg (to 4100 ng/L) in the pore waters probably result from oxidation of sphalerite-rich rocks. The low-pH and high concentrations of dissolved Fe, Al, and SO4 are conducive to precipitation of interstitial jarosite in the intertidal gravels. Although pore waters from the intertidal zone at the Threeman mine site have circumneutral pH values, small amounts of dissolved Fe2+ in the pore waters are oxidized during mixing with seawater, resulting in precipitation of Fe-oxyhydroxide flocs along the beach–seawater interface. At the Beatson site, surface waters funneled through the underground mine workings and discharged across the waste dumps have near-neutral pH (6.7–7.3) and a relatively small base-metal load; however, these streams probably play a role in the physical transport of metalliferous particulates into intertidal and offshore areas during storm events. Somewhat more acidic fluids, to pH 5.3, occur in stagnant seeps and small streams emerging from the Beatson waste dumps. Amorphous Fe precipitates in stagnant waters at Beatson have high Cu (5.2 wt%) and Zn (2.3 wt%) concentrations that probably reflect adsorption onto the extremely high surface area of colloidal particles. Conversely, crystalline precipitates composed of ferrihydrite and schwertmannite that formed in the active flow of small streams have lower metal contents, which are attributed to their smaller surface area and, therefore, fewer reactive sorption sites. Seeps containing precipitates with high metal contents may contribute contaminants to the marine environment during storm-induced periods of high runoff. Preliminary chemical data for mussels (Mytilus edulis) collected from Beatson, Ellamar, and Threeman indicate that bioaccumulation of base metals is occurring in the marine environment at all three sites.  相似文献   

10.
We present first data on the geochemistry, mineralogy and morphology of near-vent sediments (35 and 200 m from active vent) and ridge flank sediments (approximately 3 km from the vent field) as well as oxyhydroxide deposits from the Endeavour segment, Juan de Fuca Ridge. The purpose of the study was to understand better the origin and characteristic features of metalliferous sediments associated with base and precious metal massive sulfides in volcanic terrains. Hydrothermal components in sediments are Fe-Si ± S-rich and Mn-Fe-Si-rich phases, sulfides and barite, which were exclusively derived from plume fallout. Sulfides are only a minor constituent of near-vent sediments (2-4 wt%) and were not detected in ridge flank sediments. The study suggests that the distribution of hydrothermal phases and associated elements in near-vent and ridge flank sediments is affected mainly by processes of agglomeration, dissolution, absorption and settling that take place within a plume and to a lesser extent post-depositional processes. Rapid deposition of sulfides in the vicinity of the vents is reflected in a sharp drop of the Cu concentrations in sediments with increasing distance from the vents. Besides sulfides, important carriers of Pb, Cu, Zn and Co in near-vent sediments are Fe-Mn oxyhydroxides that occur together with silica as aggregates of gel-like material and flaky particles and as coatings on filaments. Away from the vents, trace metals are mostly in Fe-Mn oxyhydroxides and authigenic Fe-rich montmorillonite. Oxyhydroxides at the Main Endeavour field are interpreted to have originated from oxidation of mound sulfides accompanied by precipitation of primary Fe-oxyhydroxide + silica from low-temperature fluids. At the Mothra field, seafloor deposits and chimney crusts composed of Fe-oxyhydroxide ± Mn + silica are considered to be direct precipitates from hydrothermal fluids that have been less diluted with seawater. Oxyhydroxide deposits exhibit unique microtextures that resemble mineralized microorganisms and may indicate existence of diverse microbial communities.  相似文献   

11.
Oxidation of sulfides at the Leona Heights Sulfur Mine has resulted in the liberation of acid, SO4 and metals to Leona Creek. Previous research at the site has indicated Fe(II) oxidation at rates faster than would be predicted by abiotic oxidation alone, particularly in the segment of stream between the Adit and Leona Street sample stations. In order to assess the mechanisms responsible for sulfide oxidation, samples were collected for isotopic analysis of water and SO4, the results of which were used to develop a stoichiometric isotope-balance model. This exercise indicated that the percentage of water-derived oxygen in SO4 increased spatially from between 56% and 64% at the Adit to between 71% and 72% at Leona Street, illustrating that increased sulfide oxidation via Fe(III) was occurring within, or as water flows over, the waste rock, relative to water emanating directly from the former mine. The incorporation of water-derived oxygen in SO4 during pyrite oxidation is a process controlled by Fe oxidizing bacteria such as A. ferrooxidans at low pH. The role of bacteria was further supported by estimates of the rate constant for Fe oxidation between sampling stations, yielding values that were approximately 106 faster than abiotic Fe oxidation alone. Stable isotopic analysis of water further indicates a close correlation of adit spring water to the local meteoric water line, while 3H data indicate a groundwater apparent age, or time of travel from its primary zone of recharge, of <5–18 a. Additionally, the δ34S data, in conjunction with reported albitized feldspars within the Leona Rhyolite host rock, indicate a magmatic origin of ore sulfur, contrary to previous interpretations at the site.  相似文献   

12.
Groundwater and sediment samples (∼ 1 m depth) at sites representative of different groundwater pathways were collected to determine the aqueous speciation of sulfur and the fractionation of sulfur isotopes in aqueous and solid phases. In addition, selected sediment samples at 5 depths (from oxic to anoxic layers) were collected to investigate the processes controlling sulfur biogeochemistry in sedimentary layers. Pyrite was the dominant sulfur-bearing phase in the capillary fringe and groundwater zones where anoxic conditions are found. Low concentrations of pyrite (< 5.9 g kg− 1) coupled with high concentrations of dissolved sulfide (4.81 to 134.7 mg L− 1) and low concentrations of dissolved Fe (generally < 1 mg L− 1) and reducible solid-phase Fe indicate that availability of reactive Fe limits pyrite formation. The relative uniformity of down-core isotopic trends for sulfur-bearing mineral phases in the sedimentary layers suggests that sulfate reduction does not result in significant sulfate depletion in the sediment. Sulfate availability in the deeper sediments may be enhanced by convective vertical mixing between upper and lower sedimentary layers due to evaporative concentration. The large isotope fractionation between dissolved sulfate and sedimentary sulfides at Owens Lake provides evidence for initial fractionation from bacterial sulfate reduction and additional fractionation generated by sulfide oxidation followed by disproportionation of intermediate oxidation state sulfur compounds. The high salinity in the Owens Lake brines may be a factor controlling sulfate reduction and disproportionation in hypersaline conditions and results in relatively constant values for isotope fractionation between dissolved sulfate and total reduced sulfur.  相似文献   

13.
In order to better understand P cycling and bioavailability in the intertidal system of the Yangtze Estuary, both surface (0–5 cm) and core (30 cm long) sediments were collected and sequentially extracted to analyze the solid-phase reservoirs of sedimentary P: loosely sorbed P; Fe-bound P; authigenic P; detrital P; and organic P. The total sedimentary P in surface and core sediments ranged from 14.58–36.81 μmol g−1 and 17.11–24.55 μmol g−1, respectively, and was dominated by inorganic P. The average percentage of each fraction of P in surface sediments followed the sequence: detrital P (54.9%) > Fe-bound P (23.7%) > organic P (14.3%) > authigenic P (6.3%) > loosely sorbed P (0.8%), whereas in core sediments it followed the sequence: detrital P (61.7%) > Fe-bound P (17.0%) > authigenic P (13.1%) > organic P (7.5%) > loosely sorbed P (0.7%). Post-depositional reorganization of P was observed in both surface and core sediments, converting organic P and Fe-bound P to authigenic P. The accumulation rates and burial efficiencies of the total P in the intertidal area ranged from 118.70–904.98 μmol cm−2 a−1 and 80.29–88.11%, respectively. High burial efficiency of the total P is likely related to the high percentage of detrital P and the high sediment accumulation rate. In addition, the bioavailable P represented a significant proportion of the sedimentary P pool, which on average accounted for 37.4% and 25.1% of the total P in surface and core sediments, respectively. This result indicates that the tidal sediment is a potential internal source of P for this P-limiting estuarine ecosystem.  相似文献   

14.
There are increasing concerns with elevated levels of Cr(VI) in the environment because it is a strong oxidant, corrosive, and carcinogenic. The concerns extend to the presence of Cr(VI) in many aquifers in California and elsewhere, where relatively high levels have been attributed to both industrial pollution and natural processes. The authors have, therefore, determined if natural redox processes contribute to the presence of high Cr(VI) concentrations (6–36 μg L−1) in an aquifer in central California relative to non-detectable concentrations (<0.1 μg L−1) in an adjacent aquifer. Specifically, the distribution and the redox speciation of dissolved (<0.45 μm) Cr have been compared with those of particulate Mn and Fe oxy-hydroxides in sediments, using X-ray absorption spectroscopy at the Mn and Fe L-edges. The analyses show a correlation between the presence of dissolved Cr(VI) and Mn (hydr)oxide minerals, which are the only common, naturally occurring minerals known to oxidize Cr(III) in laboratory experiments. This covariance substantiates the results of those experiments and previous field studies that indicate natural oxidation mechanisms might account for the relatively high levels of Cr(VI) in the study site, as well as for elevated concentrations in other aquifers with similar biogeochemical conditions.  相似文献   

15.
The hydrogeochemical processes that took place during an aquifer storage and recovery (ASR) trial in a confined anoxic sandy aquifer (Herten, the Netherlands) were identified and quantified, using observation wells at 0.1, 8 and 25 m distance from the ASR well. Oxic drinking water was injected in 14 ASR cycles in the period 2000–2009. The main reactions consisted of the oxidation of pyrite, sedimentary organic matter, and (adsorbed) Fe(II) and Mn(II) in all aquifer layers (A–D), whereas the dissolution of carbonates (Mg-calcite and Mn-siderite) occurred mainly in aquifer layer D. Extinction of the mobilization of SO4, Fe(II), Mn(II), As, Co, Ni, Ca and total inorganic C pointed at pyrite and calcite leaching in layer A, whereas reactions with Mn-siderite in layer D did not show a significant extinction over time. Iron(II) and Mn(II) removal during recovery was demonstrated by particle tracking and pointed at sorption to neoformed ferrihydrite. Part of the oxidants was removed by neoformed organic material in the ASR proximal zone (0 – ca. 5 m) where micro-organisms grow during injection and die away when storage exceeds about 1 month. Anoxic conditions during storage led to increased concentrations for a.o. Fe(II), Mn(II) and NH4 as noted for the first 50–200 m3 of abstracted water during the recovery phase. With a mass balance approach the water–sediment reactions and leaching rate of the reactive solid phases were quantified. Leaching of pyrite and calcite reached completion at up to 8 m distance in layer A, but not in layer D. The mass balance approach moreover showed that Mn-siderite in layer D was probably responsible for the Mn(II) exceedances of the drinking water standard (0.9 μmol/L) in the recovered water. Leaching of the Mn-siderite up to 8 m from the ASR well would take 1600 more pore volumes of drinking water injection (on top of the realized 460).  相似文献   

16.
  相似文献   

17.
The Haast and Clutha rivers drain opposing flanks of New Zealand’s Southern Alps. Major element analyses of grain size fractions (2–1 mm, 1 mm–355 μm, 355–63 μm, and <63 μm) from bedload sediments collected throughout the reach of each river suggest that weathering is strongly partitioned between the chemical weathering of carbonates and the physical weathering of silicates. Sand size fractions from both rivers are depleted in CaO (∼0.2–2.1 wt%) relative to source schists (∼3 wt% CaO), while silt fraction CaO concentrations range from 2–5 wt%. The depletion of CaO in the sediments is interpreted to be due at least in part to removal of carbonate during chemical weathering of the schist protolith in the soil zone. The observed covariance of CaO and P2O5 concentrations in all river sediment suggests that most CaO is bound in a combination of phosphate-bearing minerals such as apatite along with other heavy mineral phases with similar hydrodynamic properties (e.g. epidote). Chemical index of alteration (CIA) values for grain size fractions from both rivers are similar (Haast: 54–63, Clutha: 49–61) and do not systematically vary with grain size or sample location. Al2O3–CaO∗ + Na2O–K2O (A–CN–K) relationships suggest that CIA values are controlled by albite–muscovite mixing rather than feldspar weathering. Both A–CN–K relationships and modal mineralogical calculations from Clutha river samples indicate progressive downstream attrition of muscovite from coarser to finer grain size fractions. In contrast, Haast river sediments display less variable normative muscovite concentrations and no downstream enrichment/depletion trends.  相似文献   

18.
Oxic limestone beds are commonly used for the passive removal of Mn(II) from coal mine drainage (CMD). Aqueous Mn(II) is removed via oxidative precipitation of Mn(III/IV) oxides catalyzed by Mn(II)-oxidizing microbes and Mn oxide (MnOx) surfaces. The relative importance of these two processes for Mn removal was examined in laboratory experiments conducted with sediments and CMD collected from eight Mn(II)-removal beds in Pennsylvania and Tennessee, USA. Sterile and non-sterile sediments were incubated in the presence/absence of air and presence/absence of fungicides to operationally define the relative contributions of Mn removal processes. Relatively fast rates of Mn removal were measured in four of the eight sediments where 63–99% of Mn removal was due to biological oxidation. In contrast, in the four sediments with slow rates of Mn(II) removal, 25–63% was due to biological oxidation. Laboratory rates of Mn(II) removal were correlated (R2 = 0.62) to bacterial biomass concentration (measured by phospholipid fatty acids (PLFA)). Furthermore, laboratory rates of Mn(II) removal were correlated (R2 = 0.87) to field-scale performance of the Mn(II)-removal beds. A practical recommendation from this study is to include MnOx-coated limestone (and associated biomass) from an operating bed as “seed” material when constructing new Mn(II)-removal beds.  相似文献   

19.
This study is one of very few dealing with mining waste contamination in high altitude, tropical-latitude areas exploited during the last century. Geochemical, mineralogical and hydrological characterizations of potentially harmful elements (PHEs) in surface waters and sediments were performed in the Milluni Valley (main reservoir of water supply of La Paz, Bolivia, 4000 m a.s.l.), throughout different seasons during 2002–2004 to identify contamination sources and sinks, and contamination control parameters. PHE concentrations greatly exceeded the World Health Organization water guidelines for human consumption. The very acidic conditions, which resulted from the oxidation of sulfide minerals in mining waste, favoured the enrichment of dissolved PHEs (Cd > Zn ? As ? Cu ∼ Ni > Pb > Sn) in surface waters downstream from the mine. Stream and lake sediments, mining waste and bedrock showed the highest PHE content in the mining area. With the exception of Fe, the PHEs were derived from specific minerals (Fe, pyrite; Zn, Cd, sphalerite, As, Fe, arsenopyrite, Cu, Fe, chalcopyrite, Pb, galena, Sn, cassiterite), but the mining was responsible for PHEs availability. Most of the PHEs were extremely mobile (As > Fe > Pb > Cd > Zn ∼ Cu > Sn) in the mining wastes and the sediments downstream from the mine. pH and oxyhydroxides mainly explained the contrasted availability of Zn (mostly in labile fractions) and As (associated with Fe-oxyhydroxides). Unexpectedly, Pb, Zn, As, and Fe were significantly attenuated by organic matter in acidic lake sediments.  相似文献   

20.
Sixty five urban road dust samples were collected from different land use areas of ∼240 km2 in Xi’an, China. The concentrations of Ag, As, Cr, Cu, Hg, Pb, Sb and Zn were determined to investigate potentially harmful element (PHE) contamination, distribution and possible sources. In addition, the concentrations in different size fractions were measured to assess their potential impact on human health. The highest concentrations were found in the fraction with particle diameters between 80 μm and 101 μm, the finest particles (<63 μm) were not the most important carriers for Ag, As, Cd, Cr, Cu, Hg, Pb and Zn. The percentages of these elements in particles with diameters less than 63 μm (PM63) and less than 101 μm (PM101) were in the range of 7–15%, and 30–55%, respectively. Three main factors influencing element distributions have been identified: (a) industrial activities; (b) prior agricultural land use; and (c) other activities commonly found in urban areas, such as traffic, coal combustion, waste dumping, and building construction/renovation. The highest concentrations were found in industrial areas for As (20 mg kg−1), Cr (853 mg kg−1), Cu (1071 mg kg−1), Pb (3060 mg kg−1) and Zn (2112 mg kg−1), and in previous agricultural areas for Ag and Hg, indicating significant contributions from industrial activities and prior agricultural activities.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号