首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Twenty-seven dives of the submersible “Nautile” in the subduction zone around Japan conducted in the French-Japanese Project Kaiko proved that fairly luxuriant benthic communities dominated by deep-sea giant clams of the genusCalyptogena (family Vesicomyidae) were consistently present on the accretionary prism at abyssal depths.Benthic communities characterized by three hitherto undescribed bivalves of the genusCalyptogena were found between depths of about 3800 and 4020 m at the mouth of Tenryu Canyon and at the top of basement swell of the Zenisu Ridge, both situated in the eastern Nankai subduction zone. Sporadic but discrete patches of organisms characterized by one more undescribed bivalve belonging to the genusCalyptogena were observed and collected between depths of 5130 and 5960 m on the landward wall of the Japan and Kouriles Trenches.Photographic inventories were prepared semiquantitatively using each series of bottom photographs taken in these areas with bow cameras of the submersible “Nautile”.Observations on the sporadic but dense distribution of the clams and other characteristic associated organisms match well with the scheme that communities sustained by chemosynthetic energy sources can be present at connate water seepages in subduction zones. These are to date the deepest record of benthic communities supposedly associated with chemosynthetic processes.  相似文献   

2.
Kyoko  Okino Yukihiro  Kato 《Island Arc》1995,4(3):182-198
Abstract The Nankai Trough, off southwest Japan, is one of the best sites for the study of geomorphic characteristics of a clastic accretionary prism. A recent multibeam survey over the central and eastern parts of the Nankai accretionary prism has revealed a large variation of the topography along the trough axis. Analysis of the bathymetric data suggests the existence of prism deformational features of different scales, such as depressions, embayment structures and cusps. These structures are the results of slope instability caused by basement relief of subducted oceanic plate. Unstable slopes recover by new accretion and development of a low angle thrust. Small-scale deformation due to the subduction of a small isolated seamount is then adjusted to the regional trend. By contrast, a 30 km indentation of the wedge observed in the eastern part of the Nankai Trough, the Tenryu Cusp, has seemed to retain its geometry. The subducted Philippine Sea plate has deformed greatly near the eastern end of the Nankai Trough, because of the collision between the Izu-Ogasawara (Bonin) arc and central Japan. Therefore, the indentation may be the result of the continuous subduction of a basement high, such as the Zenisu Ridge, which has been formed under north-south compression due to the arc-arc collision.  相似文献   

3.
Seabeam mapping and detailed geophysical surveying have been conducted over the Nankai Trough where the fossil Shikoku Ridge is subducted below southwest Japan. The geometry of the oceanic lithosphere bending under the margin as well as the three-dimensional structure of the accretionary prism have thus been determined in detail. Three 350° trending, probably transform faults have been identified in the area of the survey. They do not extend further south and appear to be limited to the last phase of spreading within the Shikoku Basin, probably between 15 and 12 Ma; this last phase of spreading would then have been accompanied by a sharp change in spreading direction from east-west to N 350°. The two eastern transform faults limit a zone of reduced Nankai trench fill of turbidites opposite to the Tosa Bae Embayment. This observation suggests that the Tosa Bae Embayment actually results from this reduced supply of trench fill to the imbricate thrusting process. The accretionary prism can be divided into three different tectonic provinces separated by continuous mappable thrusts, the Lower and Upper Main Thrusts. Surface shortening is limited to the lower accretionary prism south of the Upper Main Thrust (UMT) whereas uplift with possible extension characterizes the prism above the UMT. Deformation, due to the relative plate motion, mostly affects the lower accretionary prism south of the UMT.  相似文献   

4.
Leg 2 of the French-Japanese 1984 Kaiko cruise has surveyed the Suruga and the Sagami Troughs, which lie on both sides of the northwestward moving and colliding Izu-Bonin Ridge, the northernmost part of the Philippine Sea plate. The transition from the Nankai Trough to the Suruga Trough is characterized by northward decrease in width of the accretionary prism, in good agreement with the increasing obliquity between the through axis and the direction of the convergence, as the strike of the convergent boundary changes from ENE-NNE to south-north. South of the area, the southern margin of the Zenisu Ridge shows contractional deformations. This supports the interpretation made by the team of Leg 1 who studied the western extension of the area we studied, that it is an intra-oceanic thrusting of the ridge over the Shikoku Basin. In the Sagami Trough, where the relative motion is highly oblique to the plate boundary, active subduction is mostly confined in the east-west trending portions of the trough located south of the Boso Peninsula and along the lower Boso Canyon, near the TTT triple junction. In between, the present motion is mainly right-lateral along the northwest trending Boso escarpment. However, an inactive but recent (Pliocene to lower Pleistocene) accretionary prism exists south of the Boso escarpment, which suggests that the relative motion was more northerly than at present before about 1 Ma ago.  相似文献   

5.
Abstract We present data showing that the intra-oceanic shortening now occurring south of the eastern Nankai Trough that has produced the Zenisu Ridge has also been responsible for the formation of a previous ridge now buried below the continental margin. This ridge, that we refer to as Paleo-Zenisu, is presently adjacent to the backstop and its location coincides with the outer limit of the seismogenic decollement. The subduction of the paleo-Zenisu ridge below the wedge has led to its complete reorganization and has given its identity to the Great Tokai earthquake rupture zone. The formation of paleo-Zenisu and its consequent subduction has induced the tilting of the backstop toward the northwest since ca 2 Ma. This model suggests that the backstop and possibly the wedge are dextrally sheared because they are extruded southwestward in relation to the collision of the Izu-Bonin Ridge with Japan. We use the finite motion from Zenisu to paleo-Zenisu to derive both the subduction vectors along the Nankai Trough and the shortening vectors within Zenisu-Izu. The amount of shortening absorbed within Zenisu-Izu increases toward the northeast. The corresponding subduction vectors of the Zenisu platelet below the wedge decrease accordingly to the northeast from 50 to less than 20 mm/year and the Zenisu body rotates clockwise with a pole near 36° North, 139° East. This might explain the apparent longer repetition time of great earthquakes in the Tokai area. On the other hand, the 25-35 mm/year obtained for the rate of shortening along the Zenisu thrust indicates a high seismic potential there.  相似文献   

6.
Helmut  Beiersdorf 《Island Arc》1993,2(3):116-125
Abstract Numerous Neogene/Quaternary marl outcrops of the submarine Antique Ridge and southern Negros accretionary complexes (Sulu Sea, Philippines) were formed by an oversteepen-ing of the slope by the collision with the Cagayan Ridge and Cuyo Platform and also by erosion.
The outcrops exhibit distinct joint systems that were developed under compressional stress parallel to an east-northeast subduction of the southeast Sulu Basin complex under the Panay-Negros Fore-Arc and Arc Complexes during the Late Miocene/earliest Pliocene. Typical bc-(longitudinal) joints following the axial trend of the subduction zone, hkO (diagonal) shear joints, and ac-(transverse) joints were formed. The regional stress in south-southeast, which has changed to northeast since the Early Pliocene, has caused an uplift of the accretionary complexes and a clockwise rotation of the subduction/collision zone axis of the Antique Ridge complex from a more northern direction to NNE. Consequently the pre-existing joint system has also rotated for 10° to 20°. A strike-slip motion parallel to this axis as a consequence of the NE collision may have been accommodated within the accretionary complex by the bc-joints.
Some bedding-plane parallel white veins or layers may be related to calcium carbonate precipitation via oxidation of methane which was probably carried by migrating fluids along shear zones.
Downslope, sediment transport as well as trench-parallel sediment transport in southerly directions is still going on, indicating active tectonic oversteepening of the slopes of the accretionary complexes as well as flowing water, possibly of intermediate water from the Northwest Sulu Basin into the Southeast Sulu Basin via the Panay Canyon.  相似文献   

7.
Abstract Seismic reflections across the accretionary prism of the North Sulawesi provide excellent images of the various structural domains landward of the frontal thrust. The structural domain in the accretionary prism area of the North Sulawesi Trench can be divided into four zones: (i) trench area; (ii) Zone A; (iii) Zone B; and (iv) Zone C. Zone A is an active imbrication zone where a decollement is well imaged. Zone B is dominated by out‐of‐sequence thrusts and small slope basins. Zone C is structurally high in the forearc basin, overlain by a thick sedimentary sequence. The subducted and accreted sedimentary packages are separated by the decollement. Topography of the oceanic basement is rough, both in the basin and beneath the wedge. The accretionary prism along the North Sulawesi Trench grew because of the collision between eastern Sulawesi and the Bangai–Sula microcontinent along the Sorong Fault in the middle Miocene. This collision produced a large rotation of the north arm of Sulawesi Island. Rotation and northward movement of the north arm of Sulawesi may have resulted in southward subduction and development of the accretionary wedge along North Sulawesi. Lateral variations are wider in the western areas relative to the eastern areas. This is due to greater convergence rates in the western area: 5 km/My for the west and 1.5 km/My for the east. An accretionary prism model indicates that the initiation of growth of the accretionary prism in the North Sulawesi Trench occurred approximately 5 Ma. A comparison between the North Sulawesi accretionary prism and the Nankai accretionary prism of Japan reveals similar internal structures, suggesting similar mechanical processes and structural evolution.  相似文献   

8.
Three thousand kilometres of multichannel (MCS) and wide-angle seismic profiles, gravity and magnetic, multibeam bathymetry and backscatter data were recorded in the offshore area of the west coast of Mexico and the Gulf of California during the spring 1996 (CORTES survey). The seismic images obtained off Puerto Vallarta, Mexico, in the Jalisco subduction zone extend from the oceanic domain up to the continental shelf, and significantly improve the knowledge of the internal crustal structure of the subduction zone between the Rivera and North American (NA) Plates. Analyzing the crustal images, we differentiate: (1) An oceanic domain with an important variation in sediment thickness ranging from 2.5 to 1 km southwards; (2) an accretionary prism comprised of highly deformed sediments, extending for a maximum width of 15 km; (3) a deformed forearc basin domain which is 25 km wide in the northern section, and is not seen towards the south where the continental slope connects directly with the accretionary prism and trench, thus suggesting a different deformational process; and (4) a continental domain consisting of a continental slope and a mid slope terrace, with a bottom simulating reflector (BSR) identified in the first second of the MCS profiles. The existence of a developed accretionary prism suggests a subduction–accretion type tectonic regime. Detailed analysis of the seismic reflection data in the oceanic domain reveals high amplitude reflections at around 6 s [two way travel time (twtt)] that clearly define the subduction plane. At 2 s (twtt) depth we identify a strong reflection which we interpret as the Moho discontinuity. We have measured a mean dip angle of 7° ± 1° at the subduction zone where the Rivera Plate begins to subduct, with the dip angle gently increasing towards the south. The oceanic crust has a mean crustal thickness of 6.0–6.5 km. We also find evidence indicating that the Rivera Plate possibly subducts at very low angles beneath the Tres Marias Islands.  相似文献   

9.
Abstract To the northeast of Taiwan, northwestward subduction of the Philippine Sea plate is occurring beneath the Eurasian plate along the Ryukyu Trench. The Ryukyu Trench, which is well defined along the northeastern part of the Ryukyu arc, cannot be easily defined west of 123° east. This is an area where the Gagua Ridge (whose origin is controversial) enters the trench from the south. On the basis of the marine geophysical survey data the following results have been obtained. The structural elements associated with the Ryukyu subduction system deform and partially disappear west of 123° east. Among other things the Ryukyu Trench terminates close to the western slope of the Gagua Ridge. The Gagua Ridge is the result of tectonic heaping and is likely to be an uplifted sliver of oceanic crust. The interaction between the Ryukyu subduction system and the Taiwan collision zone encompasses a wide region from Taiwan to the longitude 124.5° east. The Gagua Ridge is a boundary between the active deformation zone related to the collision in Taiwan and the West Philippine Basin. It is proposed that there is a tectonic zone that can be traced from the Okinawa Trough on the north to the southern termination of the Gagua Ridge on the south.  相似文献   

10.
The Nankai Trough, Japan, is a subduction zone characterized by the recurrence of disastrous earthquakes and tsunamis. Slow earthquakes and associated tremor also occur intermittently and locally in the Nankai Trough and the causal relationship between slow earthquakes and large earthquakes is important to understanding subduction zone dynamics. The Nankai Trough off Muroto, Shikoku Island, near the southeast margin of the rupture segment of the 1946 Nankai earthquake, is one of three regions where slow earthquakes and tremor cluster in the Nankai Trough. On the Philippine Sea plate, the rifting of the central domain of the Shikoku Basin was aborted at ~15 Ma and underthrust the Nankai forearc off Muroto. Here, the Tosa-Bae seamount and other high-relief features, which are northern extension of the Kinan Seamount chain, have collided with and indented the forearc wedge. In this study, we analyzed seismic reflection profiles around the deformation front of accretionary wedge and stratigraphically correlated them to drilling sites off Muroto. Our results show that the previously aborted horst-and-graben structures, which were formed around the spreading center of the Shikoku Basin at ~15 Ma, were rejuvenated locally at ~6 Ma and more regionally at ~3.3 Ma and have remained active since. The reactivated normal faulting has enhanced seafloor roughness and appears to affect the locations of slow earthquakes and tremors. Rejuvenated normal faulting is not limited to areas near the Nankai Trough, and extends more than 200 km into the Shikoku Basin to the south. This extension might be due to extensional forces applied to the Philippine Sea plate, which appear to be driven by slab-pull in the Ryukyu and Philippine trenches along the western margin of the Philippine Sea plate.  相似文献   

11.
We take a fresh look at the topography, structure and seismicity of the Ganges–Brahmaputra Delta (GBD)–Burma Arc collision zone in order to reevaluate the nature of the accretionary prism and its seismic potential. The GBD, the world's largest delta, has been built from sediments eroded from the Himalayan collision. These sediments prograded the continental margin of the Indian subcontinent by  400 km, forming a huge sediment pile that is now entering the Burma Arc subduction zone. Subduction of oceanic lithosphere with > 20 km sediment thickness is fueling the growth of an active accretionary prism exposed on land. The prism starts at an apex south of the GBD shelf edge at  18°N and widens northwards to form a broad triangle that may be up to 300 km wide at its northern limit. The front of the prism is blind, buried by the GBD sediments. Thus, the deformation front extends 100 km west of the surface fold belt beneath the Comilla Tract, which is uplifted by 3–4 m relative to the delta. This accretionary prism has the lowest surface slope of any active subduction zone. The gradient of the prism is only  0.1°, rising to  0.5° in the forearc region to the east. This low slope is consistent with the high level of overpressure found in the subsurface, and indicates a very weak detachment. Since its onset, the collision of the GBD and Burma Arc has expanded westward at  2 cm/yr, and propagated southwards at  5 cm/yr. Seismic hazard in the GBD is largely unknown. Intermediate-size earthquakes are associated with surface ruptures and fold growth in the external part of the prism. However, the possibility of large subduction ruptures has not been accounted for, and may be higher than generally believed. Although sediment-clogged systems are thought to not be able to sustain the stresses and strain-weakening behavior required for great earthquakes, some of the largest known earthquakes have occurred in heavily-sedimented subduction zones. A large earthquake in 1762 ruptured  250 km of the southern part of the GBD, suggesting large earthquakes are possible there. A large, but poorly documented earthquake in 1548 damaged population centers at the northern and southern ends of the onshore prism, and is the only known candidate for a rupture of the plate boundary along the subaerial part of the GBD–Burma Arc collision zone.  相似文献   

12.
We conducted a 3‐D seismic inversion study to investigate spatial variations of physical properties of the décollement zone (DZ) and protodécollement zone (PDZ) under the northern Barbados accretionary prism. Significant spatial variations of physical properties were observed in the PDZ seaward of the thrust front from the inversion data. The density generally increases southward with a few localized low‐density patches. A lower density commonly corresponds to a thicker PDZ, suggesting that the paleomorphology may at least partially control the variations of the physical properties. Similar low‐density patches were also found in the DZ. These features may be inherited from those of the PDZ and enhanced after subduction through localized arrested consolidation. Under the prism toe, the density of the DZ increases landward. This trend may mainly result from shear‐induced consolidation of the DZ but may also be related to landward increasing tectonic loading. Significant north–south differences in density and, thus, porosity and strength of the PDZ, are observed and these differences may continue into the DZ. A stronger DZ is likely responsible for a larger prism taper observed in the southern area of the prism toe. The larger taper, thus more horizontal shortening, coupled with a thinner sediment sheet above the PDZ in the southern area, may cause a relative retreat of the thrust front and a pronounced change in strike of the sequence thrusts south of seismic Line 690. The north–south differences may ultimately have originated in the approach of a structurally higher segment of the Tiburon Rise. The Tiburon Rise affects regional morphology and, thus, it controls the sedimentation and physical properties of the PDZ. It may also control sediment accumulation above the PDZ. Therefore, the sedimentational change induced by the structural high of the Tiburon Rise, in turn, resulted in structural change of the prism in the southern area.  相似文献   

13.
Jonathan C.  Lewis  Tim  Byrne David J.  Prior 《Island Arc》1997,6(2):183-196
Abstract We present backscattered scanning electron microscope and petrographic microscope observations of deformed sediments from Ocean Drilling Program (ODP) Site 808 in order to better understand the dewatering and deformation history of the Nankai accretionary complex. This synthesis of deformation textures has three implications. First, the early structures that dominate the Nankai prism, small faults and kink bands, have very different electron microscope versus optical microscopic expressions. This observation is important to investigations of fine-grained sediment in both stable and active tectonic settings, in part, because these materials have often been studied almost exclusively by electron microscope methods. In sediments of this type, investigators often forego petrographic analysis because of the relative opacity of samples at normal (i.e. 30 pm) thin section thicknesses. Second, the textural observations we have compiled suggest that these deformation structures acted as 'single-event' pathways that contributed to diffusive dewatering of the prism. Third, our observations serve as a reference frame for the early tectonic structures that are important to the dewatering history of a 'sandy' accretionary prism.  相似文献   

14.
The Andaman–Sumatra margin displays a unique set‐up of extensional subduction–accretion complexes, which are the Java Trench, a tectonic (outer arc) prism, a sliver plate, a forearc, oceanic rises, inner‐arc volcanoes, and an extensional back‐arc with active spreading. Existing knowledge is reviewed in this paper, and some new data on the surface and subsurface signatures for operative geotectonics of this margin is analyzed. Subduction‐related deformation along the trench has been operating either continuously or intermittently since the Cretaceous. The oblique subduction has initiated strike–slip motion in the northern Sumatra–Andaman sector, and has formed a sliver plate between the subduction zone and a complex, right‐lateral fault system. The sliver fault, initiated in the Eocene, extended through the outer‐arc ridge offshore from Sumatra, and continued through the Andaman Sea connecting the Sagaing Fault in the north. Dominance of regional plate dynamics over simple subduction‐related accretionary processes led to the development and evolution of sedimentary basins of widely varied tectonic character along this margin. A number of north–south‐trending dismembered ophiolite slices of Cretaceous age, occurring at different structural levels with Eocene trench‐slope sediments, were uplifted and emplaced by a series of east‐dipping thrusts to shape the outer‐arc prism. North–south and east–west strike–slip faults controlled the subsidence, resulting in the development of a forearc basins and record Oligocene to Miocene–Pliocene sedimentation within mixed siliciclastic–carbonate systems. The opening of the Andaman Sea back‐arc occurred in two phases: an early (～11 Ma) stretching and rifting, followed by spreading since 4–5 Ma. The history of inner‐arc volcanic activity in the Andaman region extends to the early Miocene, and since the Miocene arc volcanism has been associated with an evolution from felsic to basaltic composition.  相似文献   

15.
Toshihiro  Ike  Gregory F.  Moore  Shin'ichi  Kuramoto  Jin-Oh  Park  Yoshiyuki  Kaneda  Asahiko  Taira 《Island Arc》2008,17(3):358-375
Abstract   When seamounts and other topographic highs on an oceanic plate are subducted, they cause significant deformation of the overriding plate and may act as asperities deeper in the seismogenic zone. Kashinosaki Knoll (KK) is an isolated basement high of volcanic origin on the subducting Philippine Sea Plate that will soon be subducted at the eastern Nankai Trough. Seismic reflection imaging reveals a thick accumulation of sediments (∼1200 m) over and around the knoll. The lower portion of the sedimentary section has a package of high-amplitude, continuous reflections, interpreted as turbidites, that lap onto steep basement slopes but are parallel to the gentler basement slopes. Total sediment thickness on the western and northern slopes is approximately 40–50% more than on the summit and southeastern slopes of KK. These characteristics imply that the basal sedimentary section northwest of KK was deposited by infrequent high-energy turbidity currents, whereas the area southeast of KK was dominated by hemipelagic sedimentation over asymmetric basement relief. From the sediment structure and magnetic anomalies, we estimate that the knoll likely formed near the spreading center of the Shikoku Basin in the early Miocene. Its origin differs from that of nearby Zenisu Ridge, which is a piece of the Shikoku Basin crust uplifted along a thrust fault related to the collision of the Izu–Bonin arc and Honshu. KK has been carried into the margin of the Nankai Trough, and its high topography is deflecting Quaternary trench turbidites to the south. When KK collides with the accretionary prism in about 1 My, the associated variations in sediment type and thickness around the knoll will likely result in complex local variations in prism deformation.  相似文献   

16.
Study of focal mechanisms of earthquakes in the Near and Komandorsky Islands indicate that there are several distinct zones of tectonic activity. South of the Near Islands, normal faulting occurs in the trench east of 172°E and low-angle thrusting dominates the Aleutian ridge. Mechanisms indicate underthrusting as far west as Mednyy Island with strike-slip faulting restricted to the south and west of Beringa Island. A zone of northeast striking left-lateral faulting near 1645.°E is proposed to separate the Aleutian Ridge from Kamchatka Peninsula. This motion, as well as faulting north of the Komandorsky Islands, may be related to the existance of a buffer plate comprising the Aleutian Ridge in the Komandorsky Islands. Active subduction terminates near 173°E and the faulting north of the Komandorsky Islands may, in part, be due to the bouyancy of a remnant slab. Depth phase modelling indicates bulletin-reported depths are overestimated due to a misidentification of depth phases.  相似文献   

17.
A rapid reduction in sediment porosity from 60 to 70 % at seafloor to less than 10 % at several kilometers depth can play an important role in deformation and seismicity in the shallow portion of subduction zones. We conducted deformation experiments on rocks from an ancient accretionary complex, the Shimanto Belt, across the Nobeoka Thrust to understand the deformation behaviors of rocks along plate boundary faults at seismogenic depth. Our experimental results for phyllites in the hanging wall and shale‐tuff mélanges in the footwall of the Nobeoka Thrust indicate that the Shimanto Belt rocks fail brittlely accompanied by a stress drop at effective pressures < 80 MPa, whereas they exhibit strain hardening at higher effective pressures. The transition from brittle to ductile behavior in the shale–tuff mélanges lies on the same trend in effective stress–porosity space as that for clay‐rich and tuffaceous sediments subducting into the modern Nankai subduction zone. Both the absolute yield strength and the effective pressure at the brittle–ductile transition for the phyllosilicate‐rich materials are much lower than for sandstones. These results suggest that as the clay‐rich or tuffaceous sediments subduct and their porosities are reduced, their deformation behavior gradually transitions from ductile to brittle and their yield strength increases. Our results also suggest that samples of the ancient Shimanto accretionary prism can serve as an analog for underthrust rocks at seismogenic depth in the modern Nankai Trough.  相似文献   

18.
Morphologic and geologic observations suggest that subduction of bathymetric highs, such as aseismic ridges, chains of seamounts, and fracture zones, are important in the development of many forearc features and that those features form during relatively brief episodes of intense tectonism. A bathymetric high obliquely entering a subduction zone tends to compress sediments along its leading edge, resulting in arcward compression of the accretionary wedge. A landward deflection of the trench axis and a steepened inner wall result from this deformation. If a significant component of oblique slip occurs along the subduction zone, then along-strike movement of the accretionary wedge may also occur. Stresses resulting from subduction of bathymetric features with sufficient buoyancy or high relief extend farther landward than in the case of smaller, less buoyant features, inducing uplift of the leading edge of the overriding plate. Tectonic erosion of the base of the overriding plate and along-strike transport of are material may also occur. The accelerated tectonism observed along several convergent margins can be attributed to the consumption of bathymetric irregularities on the seafloor rather than temporally abrupt changes in rates and directions of plate motions or other episodic events in the accretionary prism.  相似文献   

19.
We reanalyzed 3D seismic reflection and logging‐while‐drilling data from the toe of the northern Barbados accretionary prism to interpret structure, deformation, and fluid flow related to subduction processes. The seafloor amplitude and coherence reveal an abrupt change in the thrust orientation from NNE at the thrust front and north and NNW about 5 km west of the thrust front. These thrust sets are separated by a triangular‐shaped quiet area, which may represent a zone of low strength. The northeast‐trending band of strong negative amplitude and high coherence in the décollement, known to be an interval of arrested consolidation, overlaps the quiet area, suggesting that the arrested consolidation may be related to the lack of thrust imbrication, and thus, vertical drainage for fluid in the accretionary prism. Fractal analysis of the décollement and top of the subducting oceanic basement indicates that the relief of the décollement correlates with the topography of the oceanic basement. Differential compaction of the underthrust sediment overlying the rugged oceanic basement, together with the basement faults that penetrate into the décollement probably caused relief or even faulting in the décollement.  相似文献   

20.
Abstract   The Oka Belt, composed of clastic rocks and greenschists, extends for approximately 600 km in the South-Siberian Sayan region and adjacent northern Mongolia. For a long time the Oka Belt's age and tectonic setting were the most controversial problem in the region. We argue that the belt was formed in Late Neoproterozoic as an accretionary prism. The Oka Belt shows imbricated thrust structure, which had originally seaward vergence and reflected the Neoproterozoic accretion process. The Early Paleozoic orogeny had minor effect on its structural style. The belt contains tectonic slivers of mid-ocean ridge basalts, some oceanic-island basalts and possible pelagic sediments. In several localities they are associated with gabbro and serpentinite. All these rocks represent the oceanic lithosphere subducting beneath the Oka prism and trapped within it. In the inner zone of the Oka Belt are the blueschists exhumed from the deeper prism level. The northern Oka Belt includes mafic intrusions geochemically similar to normal mid-oceanic ridge basalt and felsic volcaniclastic rocks. This segment of the belt is very similar to the Tertiary portion of northern Shimanto Belt, in Japan, and has also experienced the subduction of orthogonal oceanic ridge beneath the prism. This event dates back to 753 ± 16 Ma (the U-Pb zircon discordia). The Oka prism started accreting in Mid-Neoproterozoic after the subduction had initiated under the Japan-like South-Siberian continental terrain. The prism existed through the second half of Neoproterozoic and accumulated a huge volume of sialic material to enlarge the nearby continent. Currently, the Oka Belt remains poorly studied and is very promising for further investigation and discoveries.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号