首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Spectral analysis of surface waves (SASW) is a nondestructive in-situ testing method used for determining the thickness and elastic properties of pavement and soil sites using the dispersion characteristics of surface waves. In previous studies, it has been demonstrated that for some sites errors may arise in experimental dispersion curves when the usual SASW test and data analysis procedures are followed, in particular the phase unwrapping procedure and source-to-near-receiver spacing distance. These errors occur due to the participation of more than one surface wave mode in SASW signals. In this study, the multiple filter/crosscorrelation technique often used in earthquake seismology for the analysis of multi-mode earthquake records is presented and applied for calculating phase velocities from SASW signals. It is demonstrated that this technique produces results that are generally more accurate than those produced by the usual phase unwrapping procedure.  相似文献   

2.
The spectral analysis of surface wave (SASW) developed in the early eighties has opened the way to the use of surface waves for the definition of shear wave velocity profiles in soil deposits or pavement structures without the need of any borings or intrusion. The SASW testing procedure was designed to minimize the contribution of higher modes and thus assumes that the Rayleigh waves which propagate at the surface belong only to the fundamental mode. Several studies have however demonstrated that, in some conditions, higher Rayleigh modes can contribute significantly to the dispersion curve. Different tests configurations exist today to deal with Rayleigh mode problem by the use of an array of receivers. In spite of that, the SASW configuration remains attractive due to the limited number of receivers, as well as, the Rayleigh modes contributing in SASW records configuration can be identified by multiple-filter technique and isolated using time-variable filters. The proposed techniques are first validated by simulated records and then applied to SASW records obtained in the field. The study confirms that higher modes can participate and even dominate in SASW records. An important contribution of higher Rayleigh modes can also exist, even if the shear wave velocity increases regularly with depth. The higher Rayleigh modes can significantly affect the accuracy of the shear wave velocity profile if they are not properly identified and separated. A multi-mode inversion process is shown to be important to have an accurate soil characterization.  相似文献   

3.
The spectral analysis of surface waves (SASW) method is an in situ, seismic method for determining the shear wave velocity (or maximum shear modulus) profile of a site. The SASW test consists of three steps: field testing, evaluation of dispersion curve by phase unwrapping method, and determination of shear modulus profile by inversion process. In general, field testing and dispersion curve evaluation are regarded as simple work. However, because of characteristic of Fourier transform used in the conventional phase unwrapping method, dispersion curve is sensitive to background noise and body waves in the low frequency range. Furthermore, under some field conditions such as pavement site, the usual phase unwrapping method can lead to erroneous dispersion curve. To overcome problem of the usual phase unwrapping method, in this paper, a new method of determining dispersion curve for SASW method was applied using time–frequency analysis based on harmonic wavelet transform as an alternative method of a current phase unwrapping method. To estimate the applicability of proposed method to SASW method, numerical simulations at various layered soil and pavement profiles were performed and the dispersion curves by proposed method are more reliable than those by the usual phase unwrapping method.  相似文献   

4.
Shallow shear wave velocities beneath a rock site are characterized using the refraction microtremor (ReMi) technique developed by Louie [Faster, better: shear-wave velocity to 100 m depth from ReMi arrays. Bull Seism Soc Am 2001; 91: 347–64]. Ground motion from a passing train enabled capture of energy propagating parallel to the recording array. This allowed evaluation of the variation of the minimum phase-velocity of the dispersion curve envelope and better estimation of the true minimum velocity beneath the site. We use a new method to image and evaluate the dispersion curve envelope via power–slowness profiles through the slowness–frequency plots introduced by Louie [Faster, better: shear-wave velocity to 100 m depth from ReMi arrays. Bull Seism Soc Am 2001; 91: 347–64]. Data illustrated the frequency dependency of dispersion curve uncertainties, with greater uncertainty occurring at low frequencies. These uncertainties map directly into uncertainty of the inverted velocity–depth profile. Above 100 m depth velocities are well constrained with 10% variability. Variability is greatly reduced when the energy propagation is along the geophone array. Greater velocity variation is observed below 100 m depth.  相似文献   

5.
The use of MASW method in the assessment of soil liquefaction potential   总被引：4，自引：0，他引：4  
The multi-channel analysis of surface wave (MASW) method is a non-invasive method recently developed to estimate shear wave velocity profile from surface wave energy. Unlike conventional SASW method, multi-station recording permits a single survey of a broad depth range and high levels of redundancy with a single field configuration. An efficient and unified wavefield transform technique is introduced for dispersion analysis and on site data quality control. The technique was demonstrated in the assessment of soil liquefaction potential at a site in Yuan Lin, Taiwan. The shear wave velocity and liquefaction potential assessments based on MASW method compares favorable to that based on SCPT shear wave measurements. Two-dimensional shear wave velocity profiles were estimated by occupying successive geophone spreads at several sites in central western Taiwan, at some of which sand boils or ground cracks occurred during 1999 Chi Chi earthquake. Liquefaction potential analysis based on MASW imaging was shown to be effective for estimating the extent of potential liquefaction hazard.  相似文献   

6.
Spectral analysis of surface waves (SASW) is a nondestructive in-situ testing method that is used to determine stiffness profiles of soil and pavement sites based on dispersion characteristics of Rayleigh-type surface waves.Inversion of the Rayleigh wave dispersion curve of a site provides information on the variation of shear-wave velocity with depth. In the inversion procedures currently used for SASW tests, the field dispersion curve is matched with a theoretical dispersion curve obtained for the fundamental mode of surface wave propagation.In order to overcome difficulties associated with the presence of multi-modes in SASW signals, a new inversion method based on the maximum vertical flexibility coefficient is introduced in this paper. Unlike root-searching methods, the new method easily identifies the predominant propagation modes. In this new approach, the simplex method is used to match field and theoretical dispersion curves automatically. The purpose of this paper is to present the details of the new method and to demonstrate its advantages.  相似文献   

7.
This study investigates the effects of underground obstacles on a Rayleigh Wave dispersion curve obtained by spectral analysis of surface waves (SASW) testing. The SASW test is simulated by a transient response analysis of an axisymmetric finite element method. Both rigid obstacles and cavities with a variety of shapes and embedment depths are considered. Results show strong fluctuations in the dispersion curve obtained from the signals recorded by receivers in the vicinity of an obstacle. The fluctuations are primarily a result of wave reflections from the near and far faces of an obstacle. Results obtained from a finite element model are explained through a comparison with a simple theoretical model and experimental results are published. Fluctuations shown in the dispersion curve can result in misinterpretation of the shear wave velocity profile. Wherever obstacles are known to exist, an SASW test should be performed in a way that minimizes these effects. The parameters that will reduce or aggravate these effects were studied and are discussed.  相似文献   

8.
Damage of embankments during earthquakes is widely attributed to the liquefaction of foundation soil. Previous studies have investigated the dynamic response of embankments by mainly considering uniform sand foundation and a single earthquake event. However, the foundation of an embankment consists of many sublayers of soil from liquefiable sand to relatively impermeable layer, and during earthquakes a mainshock may trigger numerous aftershocks within a short time which may have the potential to cause additional damage to soil structures. Accordingly, the investigation of liquefaction-induced deformation of earthen embankments on various liquefiable foundation conditions under mainshock–aftershock sequential ground motions is carried out by a series of dynamic centrifuge tests in this study. The liquefiable foundation includes uniform sand profile, continuous layered soil profile, and non-homogeneous soil profiles. Effects of various foundation conditions on embankment deformations are compared and analyzed. From the test results, it is found that the embankment resting on non-homogeneous soil deposits suffer more damage compared to the uniform sand foundation of same relative density. The test results also suggest that the sequential ground motions have a significant effect on the accumulated deformation of embankment.  相似文献   

9.
Soft ground improvement using piles has increasingly been used as a rapid construction technique for railway and highway embankments over soft soil areas. While most studies conducted so far have addressed only issues of stability and settlement of pile-supported embankments under static loading, very limited attention has been paid to understanding their behaviors under transient loading of moving vehicles. In this study, vibration behaviors of this embankment system under high-speed train passage are investigated through three-dimensional finite element simulation. They include (1) characteristics of the surface wave field at high train speeds, (2) the dependence of vibration amplitude on the train speed and the phenomenon of critical speed, and (3) response at some typical locations in the system when the train moves at the critical speed. The study shows that there are breaks in the simulated wave fronts as transiting between different materials due to the difference in the Rayleigh wave speed among the materials relative to the train speed, and that the increase in train speed is accompanied by the increase in phase shift between the train load and the displacement pattern beneath the load. It is shown that the critical speed of the system is governed by the embankment, instead of the soft soil as commonly observed in previous studies in which the ground is not improved. Namely the vibration amplitude is maximally amplified when the train speed approaches the characteristic Rayleigh wave speed of the embankment material. In addition, the results also suggest that the sloping surfaces on the ballast and embankment along with the piles form a ‘trapping’ effect by which most of the train-induced waves, especially higher-frequency waves, incident to the sloping surfaces are trapped and dissipated within the pile-supported embankment system, and thus significantly reducing vibration amplitudes outside the embankment.  相似文献   

10.
The air flow and heat transfer in gravel embankment in permafrost areas   总被引：3，自引：0，他引：3  
A comparative numerical investigation of transient temperature profile and pore-air velocities in horizontal rock block embankments are conducted using the "gravels model", in which the embankment is composed of stones and air, and the "porous media model" respectively. As the velocities from the "gravels model" directly reflect the true flow of air and winter-time convection, in this paper it can be concluded that computational results from the "gravels model"are superior to the "porous media model". In addition, the "gravels model" has the advantages of reflecting the effect of the dimensions and collocation of gravels upon the temperature fields.Therefore, the computation of the gravels embankment is mainly based on the gravels model.Simulation results show that in summer, a clockwise circulation of the pore-air extends throughout most of the embankment. However its motion is very weak that results in relatively straight horizontal isotherm lines. And heat transfer is mainly maintained through conduction. But in winter, the pore-air velocities are higher and multiple vortexes are formed in the embankment.Natural convection then becomes the dominant influence on the isotherm shapes within the embankment. The isotherms are complex and alternative upward and downward flowing plumes exist. The winter-time convection can further reduce the temperature of the foundation soil beneath the gravel embankment. In addition, the effects of the gravel dimensions within the embankment have been analyzed and compared in the gravels model. It shows that in winter, large stones, e.g. 200 mm, lead to stronger vortexes than those of small stones, say 60 mm. Consequently, the zone of low-temperature beneath the large-stone embankment extends deeper into the ground.  相似文献   

11.
A comparative numerical investigation of transient temperature profile and pore-air velocities in horizontal rock block embankments are conducted using the “gravels model”, in which the embankment is composed of stones and air, and the “porous media model” respectively. As the velocities from the “gravels model” directly reflect the true flow of air and winter-time convection, in this paper it can be concluded that computational results from the “gravels model” are superior to the “porous media model”. In addition, the “gravels model” has the advantages of reflecting the effect of the dimensions and collocation of gravels upon the temperature fields. Therefore, the computation of the gravels embankment is mainly based on the gravels model. Simulation results show that in summer, a clockwise circulation of the pore-air extends throughout most of the embankment. However its motion is very weak that results in relatively straight horizontal isotherm lines. And heat transfer is mainly maintained through conduction. But in winter, the pore-air velocities are higher and multiple vortexes are formed in the embankment. Natural convection then becomes the dominant influence on the isotherm shapes within the embankment. The isotherms are complex and alternative upward and downward flowing plumes exist. The winter-time convection can further reduce the temperature of the foundation soil beneath the gravel embankment. In addition, the effects of the gravel dimensions within the embankment have been analyzed and compared in the gravels model. It shows that in winter, large stones, e.g. 200 mm, lead to stronger vortexes than those of small stones, say 60 mm. Consequently, the zone of low-temperature beneath the large-stone embankment extends deeper into the ground.  相似文献   

12.
The overarching objective of this research was to provide an improved understanding of the role of land use and associated management practices on long‐term water‐driven soil erosion in small agricultural watersheds by coupling the established, physically based, distributed parameter Water Erosion Prediction Project (WEPP) model with long‐term hydrologic, land use and soil data. A key step towards achieving this objective was the development of a detailed methodology for model calibration using physical ranges of key governing parameters such as effective hydraulic conductivity, critical hydraulic shear stress and rill/inter‐rill erodibilities. The physical ranges for these governing parameters were obtained based on in situ observations within the South Amana Sub‐Watershed (SASW) (～26 km2) of the Clear Creek, IA watershed where detailed documentation of the different land uses was available for a period of nearly 100 years. A quasi validation of the calibrated model was conducted through long‐term field estimates of water and sediment discharge at the outlet of SASW and also by comparing the results with data reported in the literature for other Iowa watersheds exhibiting similar biogeochemical properties. Once WEPP was verified, ‘thought experiments’ were conducted to test our hypothesis that land use and associated management practices may be the major control of long‐term erosion in small agricultural watersheds such as SASW. Those experiments were performed using the dominant 2‐year crop rotations in the SASW, namely, fall till corn–no till bean (FTC‐NTB), no till bean–spring till corn (NTB‐STC) and no till corn–fall till bean (NTC‐FTB), which comprised approximately 90% of the total acreage in SASW. Results of this study showed that for all crop rotations, a strong correspondence existed between soil erosion rates and high‐magnitude precipitation events during the period of mid‐April and late July, as expected. The magnitude of this correspondence, however, was strongly affected by the crop rotation characteristics, such as canopy/residue cover provided by the crop, and the type and associated timing of tillage. Tillage type (i.e. primary and secondary tillages) affected the roughness of the soil surface and resulted in increases of the rill/inter‐rill erodibilities up to 35% and 300%, respectively. Particularly, the NTC‐FTB crop rotation, being the most intense land use in terms of tillage operations, caused the highest average annual erosion rate within the SASW, yielding quadrupled erosion rates comparatively to NTB‐STC. The impacts of tillage operation were further exacerbated by the timing of the operations in relation to precipitation events. Timing of operations affected the ‘life‐time’ of residue cover and as a result, the degree of protection that residue cover offers against the water action on the soil surface. In the case of NTC‐FTB crop rotation, dense corn residue stayed on the ground for only 40 days, whereas for the other two rotations, corn residue provided a protective layer for nearly 7 months, lessening thus the degree of soil erosion. The cumulative effects of tillage type and timing in conjunction with canopy/residue cover led to the conclusion that land management practices can significantly amplify or deamplify the impact of precipitation on long‐term soil erosion in small agricultural watersheds. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

13.
At present, the Qinghai-Tibetan railway is being built, and it will pass across more than 550-km perma-frost regions. Therefore, the key to the stability of therailway embankment lies in solving the permafrost problem. Because global warming and existence of railway tend to degrade the permafrost in these re-gions[1], more difficulties and problems are induced in the construction and maintenance of railway. In the area where the mean annual air temperature is higher than a certain value, the …  相似文献   

14.
对一维剪切条计算模型进行改进,提出了土石坝非线性地震反应的简化计算方法。首先将坝体沿坝高离散为一系列的具有不同剪切刚度与阻尼比等参数特性的层状体系,建立了各层的振动控制方程及其边值条件,进而采用数学物理方程方法进行了求解,确定了体系的振动特性,并根据振型叠加原理和Duhamel积分确定了坝体地震反应的线弹性解。采用等价线性化方法考虑坝料的动力非线性性质,通过对线弹性地震响应的反复迭代计算,使得各层土的模量和阻尼比与其相应的剪应变水平相协调,确定出与非线性坝体系统相等效的线性解答,并将所得到的地震响应作为非线性地震响应的近似解。最后,以均质坝和心墙坝作为算例进行了具体的数值计算,将所得结果与有限元数值解进行对比分析,论证了所提方法的适用性和合理性。  相似文献   

15.
Surface soil heat flux is a component of surface energy budget and its estimation is needed in land-atmosphere interaction studies. This paper develops a new simple method to estimate soil heat flux from soil temperature and moisture observations. It gives soil temperature profile with the thermal diffusion equation and, then, adjusts the temperature profile with differences between observed and computed soil temperatures. The soil flux is obtained through integrating the soil temperature profile. Compared with previous methods, the new method does not require accurate thermal conductivity. Case studies based on observations, synthetic data, and sensitivity analyses show that the new method is preferable and the results obtained with it are not sensitive to the availability of temperature data in the topsoil. In addition, we pointed out that the soil heat flux measured with a heat-plate can be quite erroneous in magnitude though its phase is accurate.  相似文献   

16.
This paper outlines an experimental analysis of ground-borne vibration levels generated by high speed rail lines on various earthwork profiles (at-grade, embankment, cutting and overpass). It also serves to provide access to a dataset of experimental measurements, freely available for download by other researchers working in the area of railway vibration (e.g. for further investigation and/or the validation of vibration prediction models).First, the work outlines experimental investigations undertaken on the Belgian high speed rail network to investigate the vibration propagation characteristics of three different embankment conditions. The sites consist of a 5.5 m high embankment, an at-grade section and a 7.2 m deep cutting. The soil material properties of each site are determined using a ‘Multichannel Analysis of Surface Waves’ technique and verified using refraction analysis. It is shown that all sites have relatively similar material properties thus enabling a generalised comparison.Vibration levels are measured in three directions, up to 100 m from the track due to three different train types (Eurostar, TGV and Thalys) and then analysed statistically. It is found that contrary to commonly accepted theory, vertical vibrations are not always the most dominant, and that horizontal vibrations should also be considered, particularly at larger offsets. It is also found that the embankment earthworks profile produced the lowest vibration levels and the cutting produced the highest. Furthermore, a low (positive) correlation between train speed and vibration levels was found. A selection of the results can be downloaded from www.davidpconnolly.com.  相似文献   

17.
We discuss recent progress in the full-waveform-based imaging of probed soils, with geotechnical site characterization applications in mind. The primary goal is the reconstruction of the material profile of near-surface, arbitrarily heterogeneous formations, in terms of the formation's spatially distributed elastic properties, using elastic waves as the probing agent.We describe first the formulation and numerical resolution of the underlying time-dependent inverse medium problem; we report briefly on numerical experiments using synthetic data and artificial target soil profiles. These demonstrate robust reconstruction. We then report extensively on the details of a field experiment, whose records we subsequently used to drive the inversion algorithms in order to characterize the site where the field experiment took place. Lastly, we compare the inverted site profile with profiles obtained using the Spectral-Analysis-of-Surface-Waves (SASW) method, in an attempt to compare our methodology against a widely used concurrent inversion approach. We also compare the inverted profile at select locations with the results of independently performed CPT tests.Overall, whether exercised by synthetic or by physical data, the full waveform inversion method we discuss herein appears quite promising for the robust subsurface imaging of near-surface deposits in support of geotechnical site characterization investigations.  相似文献   

18.
With well-determined hydraulic parameters in a hydrologic model, a traditional data assimilation method (such as the Kalman filter and its extensions) can be used to retrieve root zone soil moisture under uncertain initial state variables (e.g., initial soil moisture content) and good simulated results can be achieved. However, when the key soil hydraulic parameters are incorrect, the error is non-Gaussian, as the Kalman filter will produce a persistent bias in its predictions. In this paper, we propose a method coupling optimal parameters and extended Kalman filter data assimilation (OP-EKF) by combining optimal parameter estimation, the extended Kalman filter (EKF) assimilation method, a particle swarm optimization (PSO) algorithm, and Richards’ equation. We examine the accuracy of estimating root zone soil moisture through the optimal parameters and extended Kalman filter data assimilation method by using observed in situ data at the Meiling experimental station, China. Results indicate that merely using EKF for assimilating surface soil moisture content to obtain soil moisture content in the root zone will produce a persistent bias between simulated and observed values. Using the OP-EKF assimilation method, estimates were clearly improved. If the soil profile is heterogeneous, soil moisture retrieval is accurate in the 0-50 cm soil profile and is inaccurate at 100 cm depth. Results indicate that the method is useful for retrieving root zone soil moisture over large areas and long timescales even when available soil moisture data are limited to the surface layer, and soil moisture content are uncertain and soil hydraulic parameters are incorrect.  相似文献   

19.
The amplitude of vertical ground surface vibrations generated by impact tests on the ground surface was measured at various radial distances from the point of impact at locations of Greece. The results of measurements were analyzed in the frequency domain (in the range from 0–100 Hz) and the attenuation characteristics of soil materials were studied in terms of a frequency-independent attenuation coefficient, a0, of the empirical Bornitz equation. The aim of the study was to investigate the effect of soil stiffness (expressed by the value of low-amplitude shear wave velocity of soil, VSO) on the value of attenuation coefficient, a0. Values of VSO for the tested soils were estimated by applying the methodology of Spectral Analysis of Surface Waves (SASW) technique and utilizing the surface vibration data. An empirical relationship between a0 and VSO1 (VSO1 is the representative value of VSO for the soil profile up to a depth of one wavelength) was established for values of VSO1 ranging from 140 to 1000 m/s. A similar relationship in terms of the low-amplitude shear modulus of soil, GO1, was also established by converting the VSO1 values to GO1 values. The experimental results were compared to values reported in the literature for comparable soil types and frequencies of vibration and a reasonable agreement was found to exist. The proposed empirical relationship can be utilized in many practical applications of soil dynamics requiring the knowledge of the attenuation rate of Rayleigh waves with distance in various types of soils.  相似文献   

20.
以黑龙江干流堤防工程实际环境为研究基础,依托水分迁移试验装置,测试了干流堤防典型砂性土试样在冻融循环下的温度场、水分场、应力场的分布情况。结果表明：堤顶混凝土公路破坏与堤身不均匀沉降有关,温度变化引起堤基含水率出现梯度变化,从而出现应力场变化,且温度梯度含水率梯度呈线性关系。地基稳定冻结深度达到1.12 m。结合实测数据建立季节性冻土区堤防基础的水、热、力三场耦合模型,最后利用ANSYS有限元分析软件进行模拟分析,证明该模型在堤防工程上的实用性。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号