共查询到20条相似文献，搜索用时 31 毫秒
1.
超临界流在现代沉积环境中几乎无处不在,但相关沉积物却极少从地层记录中被辨识出来,这是当前沉积学研究所面临的一个困境,文中称之为“超临界流沉积问题”。按弗劳德数增大顺序,超临界流可依次形成稳定逆行沙丘、不稳定逆行沙丘、急滩—深潭及周期阶坎等底形,相应的地貌动力学也从同相位体制(逆行沙丘)逐渐过渡为水跃体制(急滩—深潭和周期阶坎)。相对于明渠流,浊流因折算密度低而更易成为超临界流。超临界浊流底形的长波长、低幅度、逆流(坡)迁移特性,决定了其沉积物发育特征的后积层理、近平行—低角度交错层理、与水跃有关的快速堆积及冲刷—充填和建造—充填构造。超临界浊流沉积可以通过沉积体的几何形态(包括波长/波高比、平面和剖面形态等)和内部沉积特征(包括波脊逆坡迁移、沉积构造、粒度变化趋势及沉积相组合等)的综合分析加以鉴别。露头、岩心分析与高分辨率地震、浅剖、多波束测深等地球物理资料的综合,是准确鉴别超临界浊流沉积单元的重要途径。本文对超临界浊流地貌动力学研究进展进行综述,并对地层记录中超临界浊流沉积的鉴别标志及相关问题进行探讨。 相似文献
2.
Mauricio M. Perillo James L. Best Miwa Yokokawa Tomohiro Sekiguchi Tomohiro Takagawa Marcelo H. Garcia 《Sedimentology》2014,61(7):2063-2085
The development of bedforms under unidirectional, oscillatory and combined‐flows results from temporal changes in sediment transport, flow and morphological response. In such flows, the bedform characteristics (for example, height, wavelength and shape) change over time, from their initiation to equilibrium with the imposed conditions, even if the flow conditions remain unchanged. These variations in bedform morphology during development are reflected in the sedimentary structures preserved in the rock record. Hence, understanding the time and morphological development in which bedforms evolve to an equilibrium stage is critical for informed reconstruction of the ancient sedimentary record. This article presents results from a laboratory flume study on bedform development and equilibrium development time conducted under purely unidirectional, purely oscillatory and combined‐flow conditions, which aimed to test and extend an empirical model developed in past work solely for unidirectional ripples. The present results yield a unified model for bedform development and equilibrium under unidirectional, oscillatory and combined‐flows. The experimental results show that the processes of bedform genesis and growth are common to all types of flows, and can be characterized into four stages: (i) incipient bedforms; (ii) growing bedforms; (iii) stabilizing bedforms; and (iv) fully developed bedforms. Furthermore, the development path of bedform; growth exhibits the same general trend for different flow types (for example, unidirectional, oscillatory and combined‐flows), bedform size (for example, small versus large ripples), bedform shape (for example, symmetrical or rounded), bedform planform geometry (for example, two‐dimensional versus three‐dimensional), flow velocities and sediment grain sizes. The equilibrium time for a wide range of bed configurations was determined and found to be inversely proportional to the sediment transport flux occurring for that flow condition. 相似文献
3.
Bedforms and associated sedimentary structures formed under supercritical water flows over aggrading sand beds 总被引：5，自引：0，他引：5
Bedforms and associated sedimentary structures, formed under supercritical water flow over an aggrading sand bed, were studied in a laboratory flume. Although the geometry and hydraulic characteristics of these bedforms (antidunes, chutes-and-pools) are well known, their internal structures are not. The objectives of the study were to: (1) describe the three-dimensional geometry of the sedimentary structures and examine their mode of origin; (2) develop a relationship between the geometries of the sedimentary structures and the formative bedforms and; (3) identify criteria that distinguish these sedimentary structures from similar types, such as hummocky and swaley cross-strata. Sedimentary structures associated with antidunes are primarily lenticular laminasets with concave-upward erosional bases (troughs) in which laminae generally dip upstream or fill the troughs symmetrically. These laminasets are associated with growth and upstream migration of water-surface waves and antidunes, and with surface-wave breaking and filling of antidune troughs respectively. In addition, sets of downstream-dipping laminae are produced by rapid migration of asymmetrical bedwaves immediately after wave breaking. Rare convex-upward laminae define the shape of antidunes that developed under stationary water-surface waves. The laminasets and internal laminae extend across the width of the flume, but vary in thickness and inclination, indicating that the antidunes have some degree of three dimensionality. The length and maximum thickness of the lenticular laminasets are approximately half of the length and height of formative antidunes, providing a potentially useful tool for palaeohydraulic reconstructions. The sets of downstream-dipping laminae formed under antidunes are distinctive and do not occur in hummocky and swaley cross-strata. Sedimentary structures associated with chutes-and-pools are sets of upstream-dipping laminae and structureless sand. 相似文献
4.
A consideration of the dune:antidune transition in fine gravel 总被引：1，自引：0，他引：1
Hydraulic data defining the dune:antidune transition in fine gravel are compared with potential flow theory, and information is drawn from published experiments and field‐based studies. Attention is given to both transitional bedforms and the development of downstream‐migrating antidunes. In the latter case, most data pertain to sand beds and not to gravel. Empirical data provide some weak support for the theoretical notion that the transition occurs at progressively lower Froude numbers at greater relative depths. Although a critical Froude number of 0·84 may reasonably be applied for the beginning of the dune to antidune transformation, lag effects (and a possible depth limitation) ensure that transitional bedforms may persist across a broad range of Froude numbers from 0·5 to 1·8. This latter observation has great relevance for palaeohydraulic estimates derived from outcrop data. Whereas the application of theoretical bedform existence fields, based upon potential flow theory, to fine gravel was previously purely speculative, the addition of experimental and field data to these plots provides a degree of confidence in applying stability theory to practical geological problems. For the first time, laboratory data pertaining to downstream‐migrating gravel antidunes are compared with theory. These bedforms have been reported from certain experimental near‐critical flows above sand or gravel beds, but have been observed infrequently in natural streams. However, there are no detailed studies from natural rivers and only a few contentious identifications from outcrops. Nevertheless, the limited hydraulic data conform to theoretical expectations. 相似文献
5.
Recognition of cyclic steps in sandy and gravelly turbidite sequences,and consequences for the Bouma facies model 总被引：2，自引：0，他引：2
Preservation of cyclic steps contrasts markedly with that of subcritical‐flow bedforms, because cyclic steps migrate upslope eroding their lee face and preserving their stoss side. Such bedforms have not been described from turbidite outcrops and cores as yet. A conceptual block diagram for recognition of cyclic steps in outcrop has been constructed and is tested by outcrop studies of deep water submarine fan deposits of the Tabernas Basin in south‐eastern Spain. Experimental data indicate that depositional processes on the stoss side of a cyclic step are controlled by a hydraulic jump, which decelerates the flow and by subsequent waxing of the flow up to supercritical conditions once more. The hydraulic jump produces a large scour with soft‐sediment deformation (flames) preserved in coarse‐tail normal‐graded structureless deposits (Bouma Ta), while near‐horizontal, massive to stratified top‐cut‐out turbidite beds are found further down the stoss side of the bedform. The architecture of cyclic steps can best be described as large, up to hundreds of metres, lens‐shaped bodies that are truncated by erosive surfaces representing the set boundaries and that consist of nearly horizontal lying stacks of top‐cut‐out turbidite beds. The facies that characterize these bedforms have traditionally been described as turbidite units in idealized vertical sequences of high‐density turbidity currents, but have not yet been interpreted to represent bedforms produced by supercritical flow. Their large size, which is in the order of 20 m for gravelly and up to hundreds of metres for sandy steps, is likely to have hindered their recognition in outcrop so far. 相似文献
6.
Morphological expression of bedforms formed by supercritical sediment density flows on four fjord‐lake deltas of the south‐eastern Canadian Shield (Eastern Canada) 
下载免费PDF全文
下载免费PDF全文 Alexandre Normandeau Patrick Lajeunesse Antoine G. Poiré Pierre Francus 《Sedimentology》2016,63(7):2106-2129
High‐resolution swath bathymetry data collected in fjord‐lakes Pentecôte, Walker and Pasteur (eastern Québec, Canada) allowed imaging in great detail the deltas of four rivers in order to understand the factors controlling the formation and downslope evolution of bedforms present on their slopes. The morphometry and morphology of 199 bedforms reflect the behaviour of sediment density flows. The shape of the bedforms, mostly crescentic, and the relationships between their morphological properties indicate that they were formed by supercritical density flows and that they are cyclic steps. The crescentic shape suggests an upslope migration while the aspect ratios and increasing wavelengths with distance from the shore (and decreasing slopes) are compatible with a cyclic step origin. At the rollover point, the acceleration of the density flows on steep slopes produces tightly spaced hydraulic jumps and favours short wavelength and symmetrical bedforms. Further downslope, decreasing slopes and increasing specific discharge increase the wavelength and asymmetry of the bedforms. The wavelength and asymmetry are increased because density flows require longer distances to become supercritical again on lower slopes after each successive hydraulic jump. Bedform morphometry and morphology are used to reconstruct density flow behaviour downslope. Froude numbers are high near the rollover point and gradually decrease downslope as the slope becomes gentler. Conversely, the specific discharge and flow depth are low near the rollover point and gradually increase downslope as the flow either erodes sediments or becomes more dilute due to sediment deposition and water entrainment. The supercritical density flows are believed to be triggered mainly by hyperpycnal flows but some evidence of delta‐front slope failures is also observed. The differences in delta morphology and bedform development between the four deltas are linked to basin morphology and watershed hydrology, but also mainly to the fjord heritage of the lakes that allowed the focusing of sediment at the delta front. 相似文献
7.
Sediment waves are commonly observed on the sea floor and often vary in morphology and geometry according to factors such as seabed slope, density and discharge of turbidity currents, and the presence of persistent contour currents. This paper documents the morphology, internal geometry and distribution of deep‐water (4000 to 5000 m) bedforms observed on the sea floor offshore eastern Canada using high‐resolution multibeam bathymetry data and seismic stratigraphy. The bedforms have wavelengths of >1 km but fundamentally vary in terms of morphology and internal stratigraphy, and are distinguished into three main types. The first type, characterized by their long‐wavelength crescentic shape, is interpreted as net‐erosional cyclic steps. These cyclic steps were formed by turbidity currents flowing through canyons and overtopping and breaching levées. The second type, characterized by their linear shape and presence on levées, is interpreted as net‐depositional cyclic steps. These upslope migrating bedforms are strongly aggradational, indicating high sediment deposition from turbidity currents. The third type, characterized by their obliqueness to canyons, is observed on an open slope and is interpreted as antidunes. These antidunes were formed by the deflection of the upper dilute, low‐density parts of turbidity currents by contour currents. The modelling of the behaviour of these different types of turbidity currents reveals that fast‐flowing flows form cyclic steps while their upper parts overspill and are entrained westward by contour currents. The interaction between turbidity currents and contour currents results in flow thickening and reduced sediment concentration, which leads to lower flow velocities. Lower velocities, in turn, allow the formation of antidunes instead of cyclic steps because the densiometric Froude number (Fr′) decreases. Therefore, this study shows that both net‐erosional and net‐depositional cyclic steps are distributed along channels where turbidity currents prevail whereas antidunes form on open slopes, in a mixed turbidite/contourite system. This study provides insights into the influence of turbidity currents versus contour currents on the morphology, geometry and distribution of bedforms in a mixed turbidite–contourite system. 相似文献
8.
Guilhem Amin Douillet Benjamin Bernard Mlanie Bouysson Quentin Chaffaut Donald Bruce Dingwell Lukas Gegg Inga Hoelscher Ulrich Kueppers Clia Mato Vanille Ariane Ritz Fritz Schlunegger Patrick Witting 《Sedimentology》2019,66(5):1531-1559
Pyroclastic currents are catastrophic flows of gas and particles triggered by explosive volcanic eruptions. For much of their dynamics, they behave as particulate density currents and share similarities with turbidity currents. Pyroclastic currents occasionally deposit dune bedforms with peculiar lamination patterns, from what is thought to represent the dilute low concentration and fluid‐turbulence supported end member of the pyroclastic currents. This article presents a high resolution dataset of sediment plates (lacquer peels) with several closely spaced lateral profiles representing sections through single pyroclastic bedforms from the August 2006 eruption of Tungurahua (Ecuador). Most of the sedimentary features contain backset bedding and preferential stoss‐face deposition. From the ripple scale (a few centimetres) to the largest dune bedform scale (several metres in length), similar patterns of erosive‐based backset beds are evidenced. Recurrent trains of sub‐vertical truncations on the stoss side of structures reshape and steepen the bedforms. In contrast, sporadic coarse‐grained lenses and lensoidal layers flatten bedforms by filling troughs. The coarsest (clasts up to 10 cm), least sorted and massive structures still exhibit lineation patterns that follow the general backset bedding trend. The stratal architecture exhibits strong lateral variations within tens of centimetres, with very local truncations both in flow‐perpendicular and flow‐parallel directions. This study infers that the sedimentary patterns of bedforms result from four formation mechanisms: (i) differential draping; (ii) slope‐influenced saltation; (iii) truncative bursts; and (iv) granular‐based events. Whereas most of the literature makes a straightforward link between backset bedding and Froude‐supercritical flows, this interpretation is reconsidered here. Indeed, features that would be diagnostic of subcritical dunes, antidunes and ‘chute and pools’ can be found on the same horizon and in a single bedform, only laterally separated by short distances (tens of centimetres). These data stress the influence of the pulsating and highly turbulent nature of the currents and the possible role of coherent flow structures such as Görtler vortices. Backset bedding is interpreted here as a consequence of a very high sedimentation environment of weak and waning currents that interact with the pre‐existing morphology. Quantification of near‐bed flow velocities is made via comparison with wind tunnel experiments. It is estimated that shear velocities of ca 0·30 m.s?1 (equivalent to pure wind velocity of 6 to 8 m.s?1 at 10 cm above the bed) could emplace the constructive bedsets, whereas the truncative phases would result from bursts with impacting wind velocities of at least 30 to 40 m.s?1. 相似文献
9.
Montri Choowong Naomi Murakoshi Ken‐ichiro Hisada Thasinee Charoentitirat Punya Charusiri Sumet Phantuwongraj Prawpan Wongkok Alongkorn Choowong Rittirong Subsayjun Vichai Chutakositkanon Kruawan Jankaew Pitsanupong Kanjanapayont 《地学学报》2008,20(2):141-149
The 2004 Indian Ocean tsunami deposited a sheet of sand with surficial bedforms at the Andaman coast of Thailand. Here we show the recognition of bedforms and the key internal sedimentary structures as criteria of the tsunami supercritical flow condition. The presence of well‐preserved capping bedforms implied a dominant tsunami inflow. Sets of internal sedimentary structures including parallel lamination, seaward and landward inclined‐laminations, and downstream dipping laminae indicated antidune structures that were generated by a supercritical flow current in a depositional stage during the inflow. A set of seaward dipping cross‐laminations containing sand with mud drape on the surface of one depositional layer are a unique indication of an outflow structure. A majority of deposits show normal grading, but in some areas, localized reverse grading was also observed. The recognition of these capping bedforms and determination of the internal sedimentary structures provides new key criteria to help derive a better understanding of tsunami flow conditions. 相似文献
10.
Interpreting the physical dynamics of ancient environments requires an understanding of how current‐generated sedimentary structures, such as ripples and dunes, are created. Traditional interpretations of these structures are based on experimental flume studies of unconsolidated quartz sand, in which stepwise increases in flow velocity yield a suite of sedimentary structures analogous to those found in the rock record. Yet cyanobacteria, which were excluded from these studies, are pervasive in wet sandy environments and secrete sufficient extracellular polysaccharides to inhibit grain movement and markedly change the conditions under which sedimentary structures form. Here, the results of flume experiments using cyanobacteria‐inoculated quartz sand are reported which demonstrate that microbes strongly influence the behaviour of unconsolidated sand. In medium sand, thin (ca 0·1 to 0·5 mm thick) microbial communities growing at the sediment–water interface can nearly double the flow velocity required to produce the traditional sequence of ripple→dune→plane‐bed lamination bedforms. In some cases, these thin film‐like microbial communities can inhibit the growth of ripples or dunes entirely, and instead bed shear stresses result in flip‐over and rip‐up structures. Thicker (ca≥1 mm thick) microbial mats mediate terracing of erosional edges; they also, foster transport of multi‐grain aggregates and yield a bedform progression consisting of flip‐overs→roll‐ups→rip‐ups of bound sand. 相似文献
11.
《Sedimentology》2018,65(3):639-669
Active margin continental slope outcrops from the Eocene Juncal Formation, the Eocene La Jolla Group and the Miocene Capistrano Formation display sedimentary structures and depositional geometries that suggest deposition from Froude supercritical flow, based on comparison to strata produced by flume experiments. These deposits range from boulder‐size soft clasts and cobble‐size hard clasts to silt and mud, and display long‐wavelength and low‐amplitude convex‐up and concave‐up geometries that range from centimetre to hundreds of metres scale, low‐angle foresets and backsets, and common internal and bounding erosion surfaces from centimetres to tens of metres in depth. In places, planar laminations, structureless beds and normally graded beds are laterally or vertically associated with such structures. In other places, consistent backsets or deep and steep‐sided scours occur. This study aimed to discuss the origin of the observed bedforms, contributed to recognition of supercritical flow deposits on continental slopes and expanded the outcrop examples of supercritical flow deposits to silt and mud. This work implies that the erosive and powerful Froude supercritical flow turbidity currents may have a substantial impact on erosional and depositional dynamics on deepwater slopes, especially on active margins due to the steep gradients and high sediment supply. 相似文献
12.
13.
《Sedimentology》2018,65(2):540-560
Bedforms related to Froude‐supercritical flow, such as cyclic steps, are increasingly frequently observed in contemporary fluvial and marine sedimentary systems. However, the number of observations of sedimentary structures formed by supercritical‐flow bedforms remains limited. The low number of observations might be caused by poor constraints on criteria to recognize these associated deposits. This study provides a detailed quantification on the mechanics of a fluvial cyclic step system, and their depositional signature. A computational fluid‐dynamics model is employed to acquire a depth‐resolved image of a cyclic step system. New insights into the mechanics of cyclic steps shows that: (i) the hydraulic jump is, in itself, erosional; (ii) there are periods over which the flow is supercritical throughout and there is no hydraulic jump, which plays a significant role in the morphodynamic behaviour of cyclic steps; and (iii) that the depositional signature of cyclic steps varies with rate of aggradation. Previous work has shown that strongly aggradational cyclic steps, where most of the deposited sediment is not reworked, create packages of backsets, bound upstream and downstream by erosive surfaces. Here, the modelling work is focussed on less aggradational conditions and more transportational systems. The depositional signature in such systems is dominated by an amalgamation of concave‐up erosional surfaces and low‐angle foresets and backsets creating lenticular bodies. The difference between highly aggradational cyclic steps and low‐aggradation steps can be visible in outcrop both by the amount of erosional surfaces, as well as the ratio of foreset to backset, with backsets being indicative of more aggradation. 相似文献
14.
高流态尤其是超临界流动的水动力学机制及其床沙底形演化的研究相较于次临界流动具有一定的差距。季节性河流以高流态为主要沉积搬运过程,为超临界流的形成与保存提供了有利条件,是研究超临界流沉积的重要载体。在季节性河流沉积体系研究进展调研基础上,明确了其基本定义、判别标准及沉积特征。通过对内蒙古岱海湖北部典型季节性冲积体系——半滩子河流发育的沉积构造进行研究表明:随着低流态向高流态演化,沙丘底形(Dune)逐步向上部平坦床沙底形(Upper plane bed)过渡,形成了低角度/S型交错层理;在高流态初期,形成了上部平坦床沙成因的平行层理;随着流动强度逐渐增大,流动机制演变为超临界流,平坦床沙逐渐向逆行沙丘(Antidune)过渡,形成了与平行层理伴生的逆行沙丘交错层理;当流动强度进一步增大,携带沉积物的流体发生较强的水力跳跃,形成了流槽与冲坑(Chute-and-Pool)。半滩子河流现代沉积中发育的高流态沉积与区域内气候变化具有明确的响应关系,表明河流沉积中广泛发育的高流态沉积构造指示了强烈季节性变化的气候特征。 相似文献
15.
Jacob A. Covault Svetlana Kostic Charles K. Paull Holly F. Ryan Andrea Fildani 《Sedimentology》2014,61(4):1031-1054
Advances in acoustic imaging of submarine canyons and channels have provided accurate renderings of sea‐floor geomorphology. Still, a fundamental understanding of channel inception, evolution, sediment transport and the nature of the currents traversing these channels remains elusive. Herein, Autonomous Underwater Vehicle technology developed by the Monterey Bay Aquarium Research Institute provides high‐resolution perspectives of the geomorphology and shallow stratigraphy of the San Mateo canyon‐channel system, which is located on a tectonically active slope offshore of southern California. The channel comprises a series of crescent‐shaped bedforms in its thalweg. Numerical modelling is combined with interpretations of sea‐floor and shallow subsurface stratigraphic imagery to demonstrate that these bedforms are likely to be cyclic steps. Submarine cyclic steps compose a morphodynamic feature characterized by a cyclic series of long‐wave, upstream‐migrating bedforms. The bedforms are cyclic steps if each bedform in the series is bounded by a hydraulic jump in an overriding turbidity current, which is Froude‐supercritical over the lee side of the bedform and Froude‐subcritical over the stoss side. Numerical modelling and seismic‐reflection imagery support an interpretation of weakly asymmetrical to near‐symmetrical aggradation of predominantly fine‐grained net‐depositional cyclic steps. The dominant mode of San Mateo channel maintenance during the Holocene is interpreted to be thalweg reworking into aggrading cyclic steps by dilute turbidity currents. Numerical modelling also suggests that an incipient, proto‐San Mateo channel comprises a series of relatively coarse‐grained net‐erosional cyclic steps, which nucleated out of sea‐floor perturbations across the tectonically active lower slope. Thus, the interaction between turbidity‐current processes and sea‐floor perturbations appears to be fundamentally important to channel initiation, particularly in high‐gradient systems. Offshore of southern California, and in analogous deep‐water basins, channel inception, filling and maintenance are hypothesized to be strongly linked to the development of morphodynamic instability manifested as cyclic steps. 相似文献
16.
植物的存在改变了河流水动力特性,造成独特的床面冲淤态势。利用实验室水槽模拟含淹没植物的河道,对床面形态和紊流统计特性参数进行测量,研究不同类型紊流作用下的床面冲淤特征以及床面起伏对流动的影响。结果表明:床面剪切紊流条件下,床面形态为马蹄坑-沙沟/沙脊与沙波复合分布,床面变形加剧了流速沿水深不均匀分布并促进水流动量交换;在自由剪切混合层紊流条件下,床面形态为植物根部马蹄形冲坑及其后方沙沟、沙脊交错分布,床面变形对流动的影响并不显著;“类二重紊流”条件下,床面形态同样表现为马蹄坑-沙沟/沙脊-沙波复合,床面变形促进植物层内部的水流动量交换、抑制紊动清扫,抑制植物层外部的动量交换、促进紊动喷射。 相似文献
17.
Side-scan sonar, seismic and core data are used to identify mega-flutes, transverse and ‘V’ shaped bedforms in turbidites around the Valencia channel mouth, north-west Mediterranean. Long-range side-scan sonar data reveal a broad, curved, asymmetric, channel, that widens and terminates downfan. The western channel bank near the channel mouth has been partly eroded by turbidity currents that spilled out of the channel. Transverse bedforms on the east of the channel floor are interpreted as antidunes and, if this interpretation is correct, they indicate that the flow was probably supercritical at least locally within the channel. Trains of mega-flutes, are incised into coarse-grained sediments of the channel floor near the channel mouth. The association of mega-flutes and antidunes is thought to be diagnostic of channel–lobe transitions on deep-sea fans. The mega-flutes pass downfan into an area of streaks that diverge at up to 45° and indicates flow expansion from the channel mouth. About 75 km downfan from the channel mouth, deep-towed side-scan data record transverse bedforms (interpreted as antidunes) passing downfan into an area covered by ‘V’ shaped bedforms with upflow pointing apices (named chevrons here). The chevrons are commonly c. 200 m from limb to limb and c. 2 m in amplitude with flow-parallel wavelengths of c. 400 m. We propose that chevrons were formed by a strong, probably supercritical (or near critical) turbidity current spreading from the channel mouth and flowing towards the Balearic Abyssal Plain. Thinning of the turbidity current, resulting from flow spreading would allow the Froude number to remain high up to 100 km from the channel mouth and could explain the observed reduction in antidune wavelength. 相似文献
18.
Jeremy G. Venditti Jeffrey A. Nittrouer Mead A. Allison Robert P. Humphries Michael Church 《Sedimentology》2019,66(6):2538-2556
A distinct suite of sand bedforms has been observed to occur in laboratory flows with limited sand supply. As sand supply to the bed progressively increases one observes sand ribbons, discrete barchans and, eventually, channel spanning dunes; but there are relatively few observations of this sequence from natural river channels. Furthermore, there are few observations of transitions from limited sand supply to abundant supply in the field. Bedforms developed under limited, but increasing, sand supply downstream of the abrupt gravel–sand transition in the Fraser River, British Columbia, are examined using multi‐beam swath‐bathymetry obtained at high flow. This is an ideal location to study supply‐limited bedforms because, due to a break in river slope, sand transitions from washload upstream of the gravel–sand transition to bed material load downstream. Immediately downstream, barchanoid and isolated dunes are observed. Most of the bedform field has gaps in the troughs, consistent with sand moving over a flat immobile or weakly mobile gravel bed. Linear, alongstream bedform fields (trains of transverse dunes formed on locally thick, linear deposits of sand) exhibit characteristics of sand ribbons with superimposed bedforms. Further downstream, channel spanning dunes develop where the bed is composed entirely of sand. Depth scaling of the dunes does not emerge in this data set. Only where the channel has accumulated abundant sand on the bed do the dunes exhibit scaling congruent with previous data compilations. The observations suggest that sediment supply plays an important, but often overlooked, role in bedform scaling in rivers. 相似文献
19.
Megan L. Hendershot Jeremy G. Venditti Ryan W. Bradley Ray A. Kostaschuk Michael Church Mead A. Allison 《Sedimentology》2016,63(3):743-760
Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough. 相似文献
20.
《Sedimentology》2018,65(1):191-208
The formative conditions for bedform spurs and their roles in bedform dynamics and associated sediment transport are described herein. Bedform spurs are formed by helical vortices that trail from the lee surface of oblique segments of bedform crest lines. Trailing helical vortices quickly route sediment away from the lee surface of their parent bedform, scouring troughs and placing this bed material into the body of the spur. The geometric configuration of bedform spurs to their parent bedform crests is predicted by a cross‐stream Strouhal number. When present, spur‐bearing bedforms and their associated trailing helical wakes exert tremendous control on bedform morphology by routing enhanced sediment transport between adjacent bedforms. Field measurements collected at the North Loup River, Nebraska, and flume experiments described in previous studies demonstrate that this trailing helical vortex‐mediated sediment transport is a mechanism for bedform deformation, interactions and transitions between two‐dimensional and three‐dimensional bedforms. 相似文献