首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Analyses of the concentration product (Ca2+) × (CO32−) in the pore waters of marine sediments have been used to estimate the apparent solubility products of sedimentary calcite (KSPc) and aragonite (KSPa) in seawater. Regression of the data gives the relation In KPSPc = 1.94 × 10−3 δP − 14.59 The 2°C, 1 atm value of KSPc is, then, 4.61 × 10−7 mol2 l−2. The pressure coefficient yields a at 2°C of −43.8 cm3 atm−1. A single station where aragonite is present in the sediments gives a value of KSPa = 9.2 × 10−7 (4°C, 81 atm). The calcite data are very similar to those determined experimentally by Ingle et al. (1973) for KSPc at 2°C and 1 atm. The calculated is also indistinguishable from the experimental results of Ingle (1975) if is assumed to be independent of pressure.  相似文献   

2.
3.
The apparent (stoichiometric) solubility product of calcite in artificial seawater of salinity 35‰ was measured by a saturometer technique. The value of the apparent solubility product was found to be (4·59 ± 0·05) × 10−7 moles/(kilogram of seawater)2 at 25°C with a temperature coefficient of −0·0108 × 10−7/°C between 2 and 25°C. These values are significantly smaller than those found by MacIntyre (1965) and other workers. The effect of these results on the saturation of the oceans with respect to calcite is examined.  相似文献   

4.
5.
The apparent solubility product Ksp of calcite in seawater was measured as a function of temperature, salinity, and pressure using potentiometric saturometry techniques. The temperature effect was hardly discernible experimentally. The value of Ksp at 25°C was 4.59·10−7 mole2/(kg seawater)2 at 35‰S, 5.34·10−7 at 43‰S, and 3.24·10−7 at 27‰S. The apparent partial molal volume was found to be −34.4 cm3 at 25°C and −42.3 cm3 at 2°C from a linear fit of log(Ksp P/Ksp 1). These results were used in conjunction with field data to calculate the degree of saturation in the oceans and showed undersaturation at shallower depths than previously reported.  相似文献   

6.
A shallow hydrothermal brine seep located off the Greek island of Milos in the Aegean Sea was studied. The brine fluid outcropped as a pool of water in a seabed depression and was detected in the surrounding pore-waters of sediments colonised by the sulphur bacterium Achromatium volutans. The seep fluid was highly saline and sulphidic, depleted in Mg2+ and SO42−, but enriched over seawater in Na+, Ca2+, K+, Cl, SiO2, reduced species and dissolved gases. The high concentrations of Na+, Ca2+ and K+ were consistent with the Milos tectonic setting. Na-K and Na-K-Ca geothermometers predicted a reservoir temperature of 300–325 °C for the most concentrated seep samples. The deep geothermal reservoir within the metamorphic basement of Milos island has already been located and studied and may represent the source of the seep fluid. Faunal diversity was lowest in seep-influenced sediments, but a sulphide-intolerant species was found in areas of the bacterial mat where salinity and temperature were much lower. Pressure-induced variations in the vertical depth of the brine interface may be occurring in the sediment.  相似文献   

7.
The kinetics of aggregation of riverine colloidal iron have been examined using a stopped-flow technique which probes the first few seconds of mixing between river and sea water end members. A significant fraction, up to 80%, of the colloidal iron is aggregated during the first 1–2 s of mixing, indicating that the aggregation process is much faster than previously thought. Most of the aggregation induced by seawater results from the divalent cations Mg2+ and Ca2+, with the overall ionic strength having little influence. At equal concentrations of 27 mM, the rate of aggregation by alkaline earth cations increased with ionic size Mg2+ < Ca2+ < Sr2+ < Ba2+. The aggregation rates were indifferent to the anion (Cl or SO42−) present. Very high aggregation rates were also induced by the common water treatment coagulant Al2(SO4)3 at concentrations in the range 20–30 µM Al(III), several orders of magnitude lower that those used for the seawater cations. Our results support the view that specific chemical interactions between the cations and the colloid particle surface, rather than simple electrical effects, control the colloid stability.  相似文献   

8.
The results of a potentiometric investigation (by ISE-H+, glass electrode) on the speciation of phytate ion (Phy12−) in an ionic medium simulating the major components (Na+, K+, Ca2+, Mg2+, Cl and SO42−) of natural seawater, at different salinities and t = 25 °C, are reported. The work was particularly aimed at determining the possible formation of mixed Ca2+–Mg2+–phytate ion pairs, and to establish how including the formation of these mixed species would affect the speciation modeling in seawater media. After testing various speciation models, that considering the formation of the MgCaH3Phy5−, MgCaH4Phy4−, Mg2CaH3Phy3− and Mg2CaH4Phy2− species was accepted, and corresponding stability constants were determined at two salinities (S = 5, 10). A discussion is reported both on the choice of the experimental conditions and on the possibility to extend these results to those typical of real seawater. A detailed procedure is also described to demonstrate that the stability of these species is higher than that statistically predicted. As reported in literature, a parameter, namely log X, has been determined in order to quantify this extra stability for the formation of each mixed species at various salinities. For example, at S = 10, log X113 = 2.67 and log X114 = 1.37 for MgCaH3Phy5− and MgCaH4Phy4− (statistical value is log Xstat = 0.60), and log X213 = 6.11 and log X214 = 2.15 for Mg2CaH3Phy3− and Mg2CaH4Phy2− (log Xstat = 1.43), respectively. Results obtained also showed that the formation of these species may occur even in conditions of low salinity (i.e. low concentration of alkaline earth cations) and low pH (i.e., more protonated ligand).  相似文献   

9.
We examine the concentration variations of the different parameters X of the carbonate system in seawater when calcium carbonate precipitation occurs. Variations are expressed as ∂[X]/∂[Ca2+]. Four different cases are considered: spontaneous chemical precipitation; calcification combined with photosynthetic activity under a constant ΔCT/Δ[Ca2+] ratio; precipitation under constant pCO2 and precipitation under constant [Ca2+]·[CO32−] ionic concentration product. The last condition should be maintained by an ecosystem which, thanks to the regulation of its calcifying and photosynthetic activity, would absorb 1 mol of carbon for organic tissue each time 1 mol of CaCO3 is formed. This stoichiometric ratio would allow the activity of these biological communities to go on in practically closed systems during periods compatible with their growth or development cycles.  相似文献   

10.
Uptake of inorganic carbon and ammonium by the plankton community of three North Carolina estuaries was measured using 14C and 15N isotope methods. At 0% light, C appeared to be lost via respiration, and at increasing light levels uptake of inorganic carbon increased linearly, saturated (mean Ik = 358±30 μEin m−2 s−1), and frequently showed inhibition at the highest light intensities. At 0% light NH4+ uptake was significantly greater than zero and was frequently equivalent to uptake in the light (light independent); at increasing light levels NH4+ uptake saturated (mean Ik = 172±44 μEin m−2 s−1) and frequently indicated strong inhibition. Light-saturated uptake rates of inorganic carbon and NH4+ were a function of chlorophyll a (r2 = 0·7−0·9); average assimilation numbers were 625 nmol CO2 (μg chl. a)−1 h−1 and 12·9 nmol NH4+ (μg chl. a)−1 h−1 and were positively correlated with temperature (r2 = 0·3−0·7). The ratio of dark to light-saturated NH4+ uptake tended to be near 1·0 for large algal populations at low NH4+ concentrations, indicating near light independence of uptake; whereas the ratio was lower for the opposite conditions. These data are interpreted as indicative of nitrogen stress, and it is suggested that uptake of NH4+ deep in the euphotic zone and at night are mechanisms for balancing the C:N of cellular pools. A 24-h study using summed short-term incubations confirmed this; the cumulative C:N of CO2 and NH4+ uptake during the daylight period was 10–20, whereas over the 24-h period the ratio was 6 due to dark NH4+ uptake. Annual carbon and nitrogen primary productivity were respectively estimated as 24 and 4·0 mol m−2 year−1 for the South River estuary, 42 and 7·3 mol m−2 year−1 for the Neuse River estuary, and 9·6 and 1·6 mol m−2 year−1 for the Newport River estuary.  相似文献   

11.
The coprecipitation of uranium with calcium carbonate   总被引:1,自引:0,他引:1  
This report is one of the studies on the factors controlling the trace element contents of marine calcareous skeletons. The values of the distribution coefficients of UO2 2+ between solutions and carbonate precipitates were measured in the laboratory at 20±1C. From the determination of the uranium contents of marine calcareous skeletons and sea water, the values of uranium between marine calcareous skeletons and sea water are expected as 1.2 to 0.3 for aragonite and 0.2 to 0,0n for calcite. The experimentally measured value of the distribution coefficient for aragonite is thermodynamically discussed. And it was known that the value of the distribution coefficient of UO2 2+ is controlled greatly by the activity coefficient of uranium dissolved in a parent medium and the crystal form of CaCO3. The activity coefficient of uranium in solution mainly owes to the formation of complexes between UO2 2+ and CO3 2–in the solution.  相似文献   

12.
The ion product of water in seawater and the total activity coefficients of hydroxide and hydrogen ions were determined over the temperature range 2° to 35°C, and the salinity range 20‰ to 44‰. At 25°C and 35‰ salinity, the measured values are pKWSW = 13.20, fOH = 0.22, fH = 0.71 on the molar concentration scale.  相似文献   

13.
The effect of ionic interactions on the kinetics of disproportionation of HO2, and the oxidation of Fe(II) and Cu(I) has been examined. The interactions of O2 with Mg2+ and Ca2+ ions in seawater increases the lifetime by 3–5 times compared to water. The effect of OH on the oxidation of Fe(II) in water and seawater shows a second degree dependence from 5 to 45°C. The effect of salinity on the oxidation of Fe(II) was found to be independent of temperature, while the effect of temperature was found to be independent of salinity. The energy of activation for the overall rate constant was found to be 7 ± 0.5 kcal mol−1.The effect of pH, temperature, salinity and ionic composition on the oxidation of Cu(I) has also been examined. In NaCl solutions from 0.5 to 6 M, the log k for the oxidation was a linear function of pH (6–8) with a slope of 0.2 ± 0.05. The reaction was strongly dependent on the Cl concentration with variation of from 0.3 to 340 min from 0.5 to 6 M Cl. The rates of oxidation of Cu+ and CuCl0 responsible for these effects are dependent upon ionic strength. The energy of activation for the reaction was 8.5–9.9 kcal mol−1 from 0.5 to 6 M. Studies of the oxidation in various NaX salts (X = I, Br and Cl) give rates in the order Cl > Br > I as expected, due to complex formation of Cu+ with X.  相似文献   

14.
The pK1* and pK2* for the dissociation of carbonic acid in seawater have been determined from 0 to 45°C and S = 5 to 45. The values of pK1* have been determined from emf measurements for the cell:
Pt](1 − X)H2 + XCO2|NaHCO3, CO2 in synthetic seawater|AgC1; Ag
where X is the mole fraction of CO2 in the gas. The values of pK2* have been determined from emf measurements on the cell:
Pt, H2(g, 1 atm)|Na2CO3, NaHCO3 in synthethic seawater|AgC1; Ag
The results have been fitted to the equations:
lnK*1 = 2.83655 − 2307.1266/T − 1.5529413 lnT + (−0.20760841 − 4.0484/T)S0.5 + 0.08468345S − 0.00654208S1
InK*2 = −9.226508 − 3351.6106/T− 0.2005743 lnT + (−0.106901773 − 23.9722/T)S0.5 + 0.1130822S − 0.00846934S1.5
where T is the temperature in K, S is the salinity, and the standard deviations of the fits are σ = 0.0048 in lnK1* and σ = 0.0070 in lnK2*.Our new results are in good agreement at S = 35 (±0.002 in pK1*and ±0.005 in pK2*) from 0 to 45°C with the earlier results of Goyet and Poisson (1989). Since our measurements are more precise than the earlier measurements due to the use of the Pt, H2|AgCl, Ag electrode system, we feel that our equations should be used to calculate the components of the carbonate system in seawater.  相似文献   

15.
Self-diffusion coefficients of five major ions have been determined by a radioactive tracer method (capillary tube method) in seawater of salinity 34.86 at 25°C. Data are presented for Na+, Ca2+, Cl, SO42, and HCO3, which constitute about 95% by weight of sea salt. The influence of temperature and salinity on these coefficients has been studied for Na+ and Cl which are the major components of sea salt: self-diffusion coefficients of these two ions have been measured in seawater, at different temperatures for a salinity of 34.86 and at different salinities for a temperature of 25°C. Diffusion coefficients of the same ions have been determined at 25°C by using another radioactive tracer method (quasi-steady cell method). In this experiment, seawater ions were allowed to diffuse from natural seawater into dilute seawater. Data have been obtained at 25°C for Na+, Ca 2+, Cl, SO42− and HCO3, corresponding to different salinity gradients.  相似文献   

16.
In this paper SIT and Pitzer models are used for the first time to describe the interactions of natural and synthetic polyelectrolytes in natural waters. Measurements were made potentiometrically at 25 °C in single electrolyte media, such as Et4NI and NaCl (for fulvic acid 0.1 < I /mol L− 1 < 0.75), and in a multi-component medium simulating the composition of natural waters at a wide range of salinities (for fulvic and alginic acids: 5 < S < 45) with particular reference to sea water [Synthetic Sea Water for Equilibrium studies, SSWE]. In order to simplify calculations, SSWE was considered to be a “single salt” BA, with cation B and anion A representing all the major cations (Na+, K+, Mg2+, Ca2+) and anions (Cl, SO42−) in natural sea water, respectively. The ion pair formation model was also applied to fulvate and alginate in artificial sea water by examining the interaction of polyanions with the single sea water cation. Results were compared with those obtained from previous speciation studies of synthetic polyelectrolytes (polyacrylic and polymethacrylic acids of different molecular weights). Results indicate that the SIT, Pitzer and Ion Pairing formation models used in studies of low molecular weight electrolytes may also be applied to polyelctrolytes with a few simple adjustments.  相似文献   

17.
The hydrolysis of silicic acid, Si(OH)4, was studied in a simplified seawater medium (0.6 M Na(Cl)) at 25°C. The measurements were performed as potentiometric titrations (hydrogen electrode) in which OH was generated coulometrically. The total concentration of Si(OH)4, B, and log[H+] were varied within the limits 0.00075 B 0.008 M and 2.5 -log[H+] 11.7, respectively. Within these ranges the formation of SiO(OH)3 and SiO2(OH)22− with formation constants log β−11(Si(OH)4 SiO(OH)3 + H+) = −9.472 ±0.002 and log β−21(Si(OH)4 SiO2(OH)22− + 2H+) = −22.07 ± 0.01 was established. With B > 0.003 M polysilicate complexes are formed, however, with -log[H+] 10.7 their formation does not significantly affect the evaluated formation constants. Data were analyzed with the least squares computer program LETAGROPVRID.  相似文献   

18.
The dissociation constants (pK1 and pK2) for methionine have been measured in artificial seawater as a function of salinity (S = 5 to 35) and temperature (5 to 45 °C). The seawater pK2 values were lower than the values in NaCl at the same ionic strength while the pK1 values in seawater were lower only at S = 35. In an attempt to understand these differences, we have made measurements of the constants in Na–Mg–Cl solutions at 25 °C. The measured values have been used to determine the formation of Mg2+ complexes and Pitzer interaction parameters for Mg2+ with methionine. The seawater model with the interaction parameters accounts for the differences between the value of pK1 and pK2 between NaCl and seawater. This study demonstrates that it is important to consider all of the ionic interactions in natural waters when examining the dissociation of organic acids.  相似文献   

19.
New sour pools have recently found in the Lower Triassic Feixianguan Fm carbonate reservoirs in the East Sichuan Basin in China with H2S up to 17.4% by volume. A recent blowout from a well drilled into this formation killed hundreds of people as a result of the percentage concentrations of H2S. In order to assess the origin of fatal H2S as well as the cause of petroleum alteration, H2S concentrations and the isotopes, δ34S and δ13C have been collected and measured in gas samples from reservoirs. Anhydrite, pyrite and elemental sulphur δ34S values have been measured for comparison. The high concentrations of H2S gas are found to occur at depths >3000 m (temperature now at 100 °C) in evaporated platform facies oolitic dolomite or limestone that contains anhydrite nodule occurrence within the reservoirs. Where H2S concentrations are greater than 10% its δ34S values lie between +12.0 and +13.2‰ CDT. This is within the range of anhydrite δ34S values found within the Feixianguan Fm (+11.0 to +21.7‰; average 15.5±3.5‰ CDT). Thus H2S must have been generated by thermochemical sulphate reduction (TSR) locally within the reservoirs. Burial history analysis and fluid inclusion data reveal that the temperature at which TSR occurred was greater than about 130–140 °C, suggesting that the present depth-temperature minimum is an artifact of post-TSR uplift. Both methane and ethane were actively involved in TSR since the petroleum became almost totally dry (no alkanes except methane) and methane δ13C values become significantly heavier as TSR proceeded. Methane δ13C difference thus reflects the extent of TSR. While it is tempting to use a present-day depth control (>3000 m) to predict the distribution of H2S in the Feixianguan Fm, this is an invalid approach since TSR occurred when the formation was buried some 1000–2000 m deeper than it is at present. The likelihood of differential uplift across the basin means that it is important to develop a basinal understanding of the thermal history of the Feixianguan Fm so that it is possible to determine which parts of the basin have been hotter than 130–140 °C.  相似文献   

20.
The dissociation constants (pK1, pK2 and pK3) for cysteine have been measured in seawater as a function of temperature (5 to 45 °C) and salinity (S = 5 to 35). The seawater values were lower than the values in NaCl at the same ionic strength. In an attempt to understand these differences, we have made measurements of the constants in Na–Mg–Cl solutions at 25 °C. The measured values have been compared to those calculated from the Pitzer ionic interaction model. The lower values of pK3 in the Na–Mg–Cl solutions have been attributed to the formation of Mg2+ complexes with Cys2− anions
Mg2+ + Cys2− = MgCys
The stability constants have been fitted to
after corrections are made for the interaction of Mg2+ with H+.The pK1 seawater measurements indicate that H3Cys+ interacts with SO42−. The Pitzer parameters β0(H3CysSO4), β1(H3CysSO4) and C(H3CysSO4) have been determined for this interaction. The formation of CaCys as well as MgCys are needed to account for the values of pK2 and pK3 in seawater.The consideration of the formation of MgCys and CaCys in seawater yields model calculated values of pK1, pK2 and pK3 that agree with the measured values to within the experimental error of the measurements. This study shows that it is important to consider all of the ionic interactions in natural waters when examining the dissociation of organic acids.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号