共查询到20条相似文献，搜索用时 62 毫秒
1.
2.
三维无缝工程地质建模系统的研制 总被引：1，自引：0，他引：1
在边界表示法的基础上,提出了无缝工程地质模型的概念,实现了基于模型线框架的无缝工程地质建模方法,研制了无缝建模系统（ROCKModel）。该系统包括3个部分：原始数据转换工具、实体建模工具与辅助工具,涉及剖分、插值、曲面求交等8个基本功能模块。在基本功能模块的基础上,提出并实现了形态复杂曲面的创建、构建模型线框架、界面编辑与重构、块体搜索、岩体质量三维分级等关键技术。该系统能够实现复杂地质对象与工程对象的无缝建模与可视化,并为数值模拟软件直接提供几何模型。 相似文献
3.
裂隙岩体一般块体理论初步 总被引：9，自引：0，他引：9
本文在前人工作的基础上提出了一种通用方法解决任意大小裂隙、任意形状工程岩体的岩石块体识别及稳定性计算问题。在这一方法中裂隙既可以是实测裂隙也可以是通过随机模拟方法生成的随机裂隙,工程岩体可以是任意由多面体组合成的形状,如复杂边坡或地下洞室,而且岩体和裂隙面可以是非均质的。这一通用过程被称为一般块体理论。它克服了关键块体理论(或楔形体法)中存在的弱点:即把裂隙假设为无限大的不连续面,因此无法预测岩石块体的数量和位置,而且一般只能识别出简单形状的凸形体。它在块体识别的同时将复杂的块体分解为几个简单的凸形块体,从而使复杂块体的几何描述、体积及重力计算、力学分析、可视化表示等一系列问题大大简化。在对一公路边坡的裂隙进行了详细观测之后,利用本文的方法进行了块体识别和稳定性分析,对本文的研究进行初步的验证。 相似文献
4.
A Morphological Visualization Method for Removability Analysis of Blocks in Discontinuous Rock Masses 总被引：1，自引：0，他引：1
Block theory has been successfully applied to solve practical problems in rock engineering associated with the stability of discontinuous rock masses. Traditional methods of block theory, which have not proposed detailed schemes for characterizing geometric features of arbitrary blocks with complex geometries, are difficult to simultaneously visualize the locations of blocks. To overcome the shortcomings of these traditional methods, this paper introduces the concept of block morphology to systematically represent the morphological characteristics of blocks. Morphological visualization analysis involves the classification, characterization and visualization of various blocks and the determination of their removability using the stereo-analytical method. The proposed morphological visualization method provides a basis for computer modeling and mechanical calculations of large-scale rock mass systems. Furthermore, examples are presented in this paper to verify the validity and demonstrate the exceptional performance of this method. 相似文献
5.
6.
基于地质剖面构建三维地质模型的方法研究 总被引：5，自引：0，他引：5
地质剖面是三维地质建模的重要数据源,运用地质剖面构建三维地质模型的方法应用较为广泛。在模型构建之前,统一确定模数据的坐标系和比例足,建立原始资料数据库。构建三维地质模型的关键是不同地质界面。本文详细介绍了模型边界面、断层面、地层界面、岩体界面等4种主要地质界面的构建流程与方法,尤其对褶皱构造、地层界面的断层效应、复杂岩体界面等的构建进行了重点阐述按模型边界面(模型的底界面和四周边界面)、DEM面、断层面、其他地质界面的顺序依次构建地质界面,构建断层面和其他地质界面时严格按先新后老的顺序。运用已构建好的地质界面按先新后老的顺序逐个、依次建立单个地质体,再将所有地质体的面模型组合成整个模型的面模型。通过对面模型进行网格(实体)填充和对网格赋予相应的属性值,最终构建三维地质模型。 相似文献
7.
为了克服现有数值计算方法在计算复杂断裂面接触滑移过程中效率低的问题，通过吸收边界元的建模思想，提出了新的数值计算方法。在该算法中，所有网格均位于岩块的边界，利用显示差分方法计算得到岩块之间的相互作用力以及岩块的位移量。利用“小球在抛物面上滑移”、“哑铃在不同倾角的斜面上”两个模拟试验对文中的算法进行验证，同时利用文中算法与有限元算法对直剪试验进行模拟。结果表明：算法能够准确描述物体之间的相互接触，准确计算得到接触块体之间的法向位移。算法能够准确判断出接触物体的“滑移状态”和“稳定状态”，摩擦力的数值计算结果与解析解的误差小于10?10。在计算断裂面接触和剪应力变化规律时，算法与有限元算法的计算结果一致，但文中计算方法的效率显著提高。 相似文献
8.
9.
In stability analysis of rock blocks, the deformability of the blocks can conveniently be simulated using the boundary element method (BEM). However, all boundary conditions are given as stresses. Thus, the displacement solution is not unique. In this paper, an algorithm is proposed to remove rigid body motions in the solution of the boundary form of Somigliana identity discretized by the direct BEM formulation. The algorithm is applied to the calculation of the normal stiffness of rock blocks and coupled with BS3D, large displacement and rotation algorithm for the general stability of rock blocks. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
10.
块体是结构控制型岩体中常见的潜在危险源之一。利用极限平衡法及强度折减法两种方法计算了某在建特大型水电站地下厂房开挖揭露的部分块体的安全系数,并根据计算结果提出一种利用块体几何及力学参数判断其稳定性的简便图解方法,经现场监测数据验证计算结果可靠性可满足工程要求。研究表明,对同一块体而言,极限平衡法和强度折减法得到的安全系数以及对其稳定性的总体判别结果并不一致。强度折减法受软件算法及网格尺寸影响,结果偏于保守。简单块体的安全系数计算应以极限平衡法为主,而复杂形态块体的安全系数用强度折减法计算较为方便。利用垂向地应力、块体体积、最大角点深度及结构面等效强度等4个指标并结合块体稳定性判别分区图,可满足快速判断块体稳定性的需要。对于判别为不稳定的块体,应及时支护并考虑加强支护。研究成果可用于类似工程块体稳定性的快速分析。 相似文献
11.
Because of the simplicity and the speed of execution, methods used in static stability analyses have yet remained relevant. The key‐block method, which is the most famous of them, is used for the stability analysis of fractured rock masses. The KBM method is just based on finding key blocks, and if no such blocks are found to be unstable, it is concluded that the whole of the rock mass is stable. Literally, though groups of ‘stable’ blocks are taken together into account, in some cases, it may prove to be unstable. An iterative and progressive stability analysis of the discontinuous rock slopes can be performed using the key‐group method, in which groups of collapsible blocks are combined. This method is literally a two‐dimensional (2D) limit equilibrium approach. Because of the normally conservational results of 2D analysis, a three‐dimensional (3D) analysis seems to be necessary. In this paper, the 2D key‐group method is developed into three dimensions so that a more literal analysis of a fractured rock mass can be performed. Using Mathematica software, a computer program was prepared to implement the proposed methodology on a real case. Then, in order to assess the proposed 3D procedure, its implementation results are compared with the outcomes of the 2D key‐group method. Finally, tectonic block No.2 of Choghart open pit mine was investigated as a case study using the proposed 3D methodology. Results of the comparison revealed that the outcomes of the 3D analysis of this block conform to the reality and the results of 2D analysis. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
12.
This paper presents a generalized procedure for the identification of rock blocks formed by finite‐sized fractures around complex excavations. It was assumed that the study domain could be partitioned into a finite number of subdomains, where each either was, or could be, approximated by a convex polyhedron, and the fractures were finite in size and disc shaped and were defined using the location of the disc center, orientation, radius, cohesion coefficient, and friction angle. These may be either deterministic fractures obtained from a field survey or random fractures generated by stochastic modeling. In addition, the rock mass could be heterogeneous; i.e. the rock matrix and individual fractures could have different parameters in different parts. The procedure included: (1) partitioning of the model domain into convex subdomains; (2) removing noncontributive fractures. A fracture was deemed contributive when it played a part in block formation; i.e. it formed at least one surface with some of the blocks; (3) decomposing the subdomains into element blocks with fractures; (4) restoring the infinite fractures to finite discs; and (5) assembling the modeling domain. Our procedure facilitates robust computational programming, and is flexible in dealing with the problem of a complex study domain and with rock heterogeneity. A computer code was developed based on the algorithm developed in this study. The algorithm and computer program were verified using an analytical method, and were used to solve the problem of block prediction around the underground powerhouse of the Three Gorges Project. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
13.
The representative elementary volume (REV) is the premise of the continuous-media method of analysis, and the investigation of the REVs of fractured rock masses is a fundamental area of rock mechanics research. The existence of an REV can be determined based on a variety of physical parameters. This paper presents an analysis of the REV from the view of blockiness, which is defined as the percentage of the volume of isolated blocks formed by fractures in the total rock volume. Seventy-seven types of fractured rock mass models were developed based on 7 classes of fracture persistence and 11 classes of spacing that are suggested by the International Society for Rock Mechanics (ISRM) fracture classification. Rock blocks in each of the 77 types of fractured rock mass models were identified using GeneralBlock to determine the variation in blockiness with model domain sizes, which were changed from 2 to 20 times the fracture spacing. For each model domain size 9 random realizations were carried out to reduce the effects of randomness. The coefficient of variation (Cv) was then used to quantify the variability of the 9 random realizations. The fluctuation in blockiness with the variation in the scale of the model region was also investigated. In this way, the size of the REV in these models can be calculated using the average and the variance of the blockiness as indicators of the convergence. The blockiness of these fractured rock masses can be determined at the REV volume. The results indicate that of the 77 models, 76 REV sizes are between 2 and 20 times the fracture spacing. The fractured rock mass with a wide fracture spacing and very high persistence (WS2–VHP) has a REV size that exceeds 20 times the fracture spacing. Thus, the WS2–VHP model should be investigated further to validate this concept. 相似文献
14.
岩体结构直接控制着岩体力学、水力学特性,岩块体积分布规律可直接反映岩体结构特征。目前研究多将节理面简化为平面,忽略了粗糙度对岩块体积的影响。利用Hurst指数H和高度均方根Rq表征节理粗糙度,研究了节理粗糙度对岩块数量和体积分布规律的影响。结果表明：(1)H、Rq控制节理的粗糙起伏形态,粗糙度随着Rq的增大而增大、随着H的增大而减小;(2)块体的数量总体上与节理粗糙度正相关,即随着粗糙度的增大而增加;(3)Rq和H对岩块体积分布的影响,主要通过改变小体积块体所占比例实现,块体的平均体积和中位体积随着粗糙度的增大而减小;(4)当节理正交且间距相近时,块体数量随粗糙度的变化可以分为3个阶段,即稳定阶段、初始增长阶段和快速增长阶段,Rq和H共同控制着各区间的相对分布范围。最后,基于摄影测量采集的数据建立了岩体节理模型,对大连某公路边坡的岩块体积分布进行了研究,验证了上述结论的准确性。 相似文献
15.
The high computational costs associated with the implicit formulation of discontinuous deformation analysis (DDA) have been one of the major obstacles for its implementation to engineering problems involving jointed rock masses with large numbers of blocks. In this paper, the Newmark-based predictor-corrector solution (NPC) approach was modified to improve the performance of the original DDA solution module in modeling discontinuous problems. The equation of motion for a discrete block system is first established with emphasis on the consideration of contact constraints. A family of modified Newmark-based predictor-corrector integration (MNPC) scheme is then proposed and implemented into a unified analysis framework. Comparisons are made between the proposed approach and the widely used constant acceleration (CA) integration approach and central difference (CD) approach, regarding the stability and numerical damping features for a single-degree-of-freedom model, where the implications of the proposed approach on open-close iteration are also discussed. The validity of the proposed approach is verified by several benchmarking examples, and it is then applied to two typical problems with different numbers of blocks. The results show that the original CA approach in DDA is efficient for the simulation of quasi-static deformation of jointed rock masses, while the proposed MNPC approach leads to improved computational efficiency for dynamic analysis of large-scale jointed rock masses. The MNPC approach therefore provides an additional option for efficient DDA of jointed rock masses. 相似文献
16.
岩体的块体结构和结构面网络模型生成,是进行各种力学分析和场分析的基础。详细研究了有限结构面进行复杂块体切割的过程,提出了相应的算法,并采用C++语言编写了相应的程序。为描述块体切割后的复连通特性,在块体数据结构中添加了有向壳的概念。结构面可以为简单的凸多边形,也可采用形态更加复杂的凹多边形。通过面-面求交线、交线环路搜索形成有向环、有向环包含关系分析形成有向面、有向面拓扑搜索形成有向壳和有向壳包含关系分析形成块体等过程,将有限结构面分别与各块体进行切割运算,形成进行块体切割的一般方法。在切割过程中将得到的有向环,有向面、有向壳和块体分别进行拓扑有效性校核,满足要求后得到最终的块体和结构面网络模型。选取4个算例来验证该方法的可行性。计算结果表明,该方法可以对复杂块体进行有效地切割,结构面可以选择包括凹形面在内的复杂多边形,方法具有普遍意义。 相似文献
17.
本文基于华东院自主研发的GeoStation地质三维勘察设计系统,设计一种城市片区地质三维建模技术方法。该方法首先采用地质剖面作为地质拓扑剖面,其次使用地质拓扑剖面将城市片区划分为若干城市区块,再次使用GeoStation系统的地层自动建模功能独立构建城市区块模型,最后将城市区块拼合为整体模型。该方法集成在GeoStation系统中,并在某城市级BIM应用中进行应用,结果表明该技术方法可行,实现了海量庞杂地质建模数据的高效管理,构建的地质三维模型可满足某城市BIM平台数据要求,为城市地理空间信息建模提供新的手段,也为其他城市开展数字化建设和智慧化管理提供范例。 相似文献
18.
《地学前缘(英文版)》2016,7(1)
Rock masses are commonly used as the underlying layer of important structures such as bridges, dams and transportation constructions. The success of a foundation design for such structures mainly depends on the accuracy of estimating the bearing capacity of rock beneath them. Several traditional numerical approaches are proposed for the estimation of the bearing capacity of foundations resting on rock masses to avoid performing elaborate and expensive experimental studies. Despite this fact, there still exists a serious need to develop more robust predictive models. This paper proposes new nonlinear prediction models for the ultimate bearing capacity of shallow foundations resting on non-fractured rock masses using a novel evolutionary computational approach, called linear genetic programming. A comprehensive set of rock socket, centrifuge rock socket, plate load and large-scaled footing load test results is used to develop the models. In order to verify the validity of the models, the sensitivity analysis is conducted and discussed. The results indicate that the proposed models accurately characterize the bearing capacity of shallow foundations. The correlation coefficients between the experimental and predicted bearing capacity values are equal to 0.95 and 0.96 for the best LGP models. Moreover, the derived models reach a notably better prediction performance than the traditional equations. 相似文献
19.
A Method to Estimate In Situ Block Size Distribution 总被引：3，自引：2，他引：1
This paper presents a new technique for estimating the in situ block size distribution in a jointed rock mass. The technique
is based on Monte Carlo simulations using more realistic fracture geometry as its input compared to other block size estimation
methods described in the literature. This geometry represents fractures as either polygons or triangulated surfaces and therefore
models persistence and truncation of fractures accurately. Persistence has been shown to be critically important for the accurate
prediction of block size and shape. We show that for rock masses with relatively small discontinuities, the results of our
predictions differ markedly from previous methods which over-predict fragmentation. 相似文献
20.
提出采用布尔运算进行三维复杂块体形态分析的一般方法,并采用C++语言编写了相应的程序。块体布尔运算是将参与运算的主块体和客块体进行交、并或差运算,得到形态更加复杂的块体。为描述块体内部非贯通结构面,在块体数据结构中引入退化有向壳,允许块体中混合维度模型的存在。将主块体各面分别与客块体各面进行面-面求交线运算,通过环路分析得到各块体分割后的面。根据具体采用的布尔运算方法,确定有效面和无效面,并将有效面进行搜索得到新的壳和块体。选取3个算例和1个典型工程实例来验证该方法的可行性和应用性。计算结果表明,该方法可以生成形态更加复杂的块体,可以很方便地处理块体中的结构面,具有普遍性和适应性,并具有广泛的实际应用价值。 相似文献