首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 448 毫秒
1.
The U.S. Geological Survey (USGS) and the Turkish General Directorate of Mineral Research and Exploration (Maden Tetkik ve Arama Genel Müdürlügü, MTA) are working together to provide a better understanding of the chemical properties of Turkish coals from major Turkish lignite producing areas.The coals in Turkey are generally low rank (lignite or subbituminous) formed in several different depositional environments at different geologic times and have differing chemical properties. Eocene coals are limited to northern Turkey; Oligocene coals, found in the Thrace Basins of northwestern Turkey, are intercalated with marine sediments; Miocene coals are generally located in Western Turkey. The coal deposits, which have limnic characteristics, have relatively abundant reserves. Pliocene–Pleistocene coals are found in the eastern part of Turkey. Most of these coals have low calorific values, high moisture, and high ash contents.Analysis of 143 coal channel samples (most are lignite and subbituminous in rank, but a few are bituminous and one is anthracitic in rank) has been completed for up to 54 elements and other coal properties using a variety of analytical techniques, including inductively coupled plasma emission and mass spectrometry, instrumental neutron activation analysis, and various single element techniques and ASTM standard procedures. Many of these coals have elemental concentrations similar to U.S. lignites found in the Gulf Coast and Fort Union regions. However, maximum or mean concentrations of B, Cr, Cs, Ni, As, Br, Sb, Cs, and U in Turkey are higher than the corresponding maximum or mean values found in either the Fort Union or Gulf Coast regions.  相似文献   

2.
This paper discusses the result of the detailed investigations carried out on the coal characteristics, including coal petrography and its geochemistry of the Pabedana region. A total of 16 samples were collected from four coal seams d2, d4, d5, and d6 of the Pabedana underground mine which is located in the central part of the Central-East Iranian Microcontinent. These samples were reduced to four samples through composite sampling of each seam and were analyzed for their petrographic, mineralogical, and geochemical compositions. Proximate analysis data of the Pabedana coals indicate no major variations in the moisture, ash, volatile matter, and fixed carbon contents in the coals of different seams. Based on sulfur content, the Pabedana coals may be classified as low-sulfur coals. The low-sulfur contents in the Pabedana coal and relatively low proportion of pyritic sulfur suggest a possible fresh water environment during the deposition of the peat of the Pabedana coal. X-ray diffraction and petrographic analyses indicate the presence of pyrite in coal samples. The Pabedana coals have been classified as a high volatile, bituminous coal in accordance with the vitrinite reflectance values (58.75–74.32 %) and other rank parameters (carbon, calorific value, and volatile matter content). The maceral analysis and reflectance study suggest that the coals in all the four seams are of good quality with low maceral matter association. Mineralogical investigations indicate that the inorganic fraction in the Pabedana coal samples is dominated by carbonates; thus, constituting the major inorganic fraction of the coal samples. Illite, kaolinite, muscovite, quartz, feldspar, apatite, and hematite occur as minor or trace phases. The variation in major elements content is relatively narrow between different coal seams. Elements Sc,, Zr, Ga, Ge, La, As, W, Ce, Sb, Nb, Th, Pb, Se, Tl, Bi, Hg, Re, Li, Zn, Mo, and Ba show varying negative correlation with ash yield. These elements possibly have an organic affinity and may be present as primary biological concentrations either with tissues in living condition and/or through sorption and formation of organometallic compounds.  相似文献   

3.
The stratigraphic and regional variation of petrographic and chemical properties within the coals of the Upper Carboniferous Tradewater Formation and surrounding rocks in the Western Kentucky coal field were analyzed with the intent of constructing a depositional model for the occurrence of these low sulfur coals. Cores were megascopically described, and coal samples were analyzed for maceral, ash, and sulfur contents. These data were then analyzed to determine regional variation within the study area, as well as vertical variation within single coal columns.Sedimentological data from core logs indicate that the majority of the Tradewater rocks consist of irregularly distributed, coarsening-upward, fine-grained detrital material that was deposited in shallow bodies of water. Fossiliferous shales and limestones indicate a marine influence. Less common coarse-grained, fining-upward sequences appear to represent deposits of meandering or braided channels.Like the detrital rocks, the coal seams are irregularly distributed and exhibit substantial variation in petrographic and chemical properties which reflect changes in the Eh and pH of the coal swamp waters. These individual swamps were relatively limited in extent and probably occupied a low-lying coastal area. The relatively high vitrinite content of most of the coals suggests a reasonable degree of preservation of decaying plant materials. The study of benched samples from surface mines suggests a distinct dichotomy between swamps that were in more or less continuous contact with sulfate-rich marine or brackish water and those in which peat accumulated in a dominantly fresh-water setting. Most of the latter show a pattern of upward increasing sulfur content and decreasing vitrinite content, indicating increasing influences of oxygenated water that would encourage microbial action and which would degrade the peat and increase the tendency for sulfide precipitation. The high sulfur coals do not display this variability. The high rates of lateral variability encountered in the data suggest that future study should concentrate on smaller areas where variation can be completely documented.  相似文献   

4.
The South Sumatra basin is among the most important coal producing basins in Indonesia. Results of an organic petrography study on coals from Tanjung Enim, South Sumatra Basin are reported. The studied low rank coals have a mean random huminite reflectance between 0.35% and 0.46% and are dominated by huminite (34.6–94.6 vol.%). Less abundant are liptinite (4.0–61.4 vol.%) and inertinite (0.2–43.9 vol.%). Minerals are found only in small amounts (0–2 vol.%); mostly as iron sulfide.Based on maceral assemblages, the coals can be grouped into five classes: (1) humotelinite-rich group, (2) humodetrinite-rich group, (3) humocollinite-rich group, (4) inertinite-rich group and (5) humodetrinite–liptinite-rich group. Comparing the distribution of maceral assemblages to the maceral or pre-maceral assemblages in modern tropical domed peat in Indonesia reveals many similarities. The basal section of the studied coal seams is represented typically by the humodetrinite–liptinite-rich group. This section might be derived from sapric or fine hemic peat often occurring at the base of modern peats. The middle section of the seams is characterized by humotelinite-rich and humocollinite-rich groups. The precursors of these groups were hemic and fine hemic peats. The top section of the coal seams is typically represented by the humodetrinite-rich or inertinite-rich group. These groups are the counterparts of fibric peat at the top of the modern peats. The sequence of maceral assemblages thus represents the change of topogenous to ombrogenous peat and the development of a raised peat bog.A comparison between the result of detailed maceral assemblage analysis and the paleodepositional environment as established from coal maceral ratio calculation indicates that the use of coal maceral ratio diagrams developed for other coal deposits fails to deduce paleo-peat development for these young tropical coals. In particular, mineral distribution and composition should not be neglected in coal facies interpretations.  相似文献   

5.
In this research, different techniques for the estimation of coal HGI values are studied. Data from 163 sub-bituminous coals from Turkey are used by featuring 11 coal parameters, which include proximate analysis, group maceral analysis and rank. Non-linear regression and neural network techniques are used for predicting the HGI values for the specified coal parameters. Results indicate that a hybrid network which is a combination of 4 separate neural networks gave the most accurate HGI prediction and all of the neural network models outperformed non-linear regression in the estimation process.  相似文献   

6.
The Carboniferous succession in the Donets Basin hosts about 130 seams, each with a thickness over 0.45 m. Nine economically important seams from the (south)western Donets Basin are studied using organic petrographical, inorganic geochemical, and organic geochemical techniques. The main aim of the study is the reconstruction of peat facies of Serpukhovian (Mississippian) and Moscovian (Middle Pennsylvanian) coals.Formation of major coal seams commenced during Serpukhovian times. Early Serpukhovian coal accumulated in a relatively narrow shore-zone and is rich in inertinite and liptinite. Very low ash yields, low to moderate sulphur contents, and upward increasing inertinite contents suggest coal deposition in raised mires.Moscovian coal has a significantly wider lateral extension and is generally rich in vitrinite. Coal properties vary widely in response to different peat facies. Low-sulphur, low-ash k7 coal was formed in a raised mire or in a low-lying mire without detrital input. l1 and l3 seams containing several fluvial partings were formed in low-lying mires. Both seams are more than 2 m thick. Seams m2 and m3 contain high-sulphur coal, a consequence of deposition in a peat with marine influence. In contrast, syngenetic sulphur content is low in the m51 upper seam, which was formed in a lacustrine setting. The late Moscovian n1 seam, up to 2.4 m thick, accumulated in a swamp with a vegetation rich in bryophytes and pteridophytes. The properties of the n1 seam are transitional between those of Serpukhovian and other Moscovian seams. Differences in maceral composition between Serpukhovian and Moscovian coals probably reflect changes in climate and vegetation type.Tuff layers are observed in the l1, l3, and m3 seams. The l3 and m3 seams contain abundant authigenic quartz. Trace element contents are high in many seams. As contents are especially high in seams c102, k7, l3 and m3. Ash in the l3 seam contains up to 8000 ppm As. Co is enriched near the base of several seams. Maxima up to 2400 ppm occur in the ash of the k7 and l3 seams. Cd contents in ash are frequently as high as 30 or 40 ppm.  相似文献   

7.
The coal deposits of Meghalaya occur in the Lakadong Sandstone (25–250 m thick) of Eocene age. The coal-bearing formations are understood to have been deposited over platform areas in estuarine and lagoonal environments and subjected to recurrent marine transgressions and regressions during the Eocene period. There are three major groups of coalfields in Meghalaya, viz. Garo Hills (West Daranggiri and Siju Coalfields), Khasi Hills (Langrin and Mawlong–Shella Coalfields) and minor coalfields (Laitryngew, Cherrapunji and Bapung Coalfields). Pillar coal samples have been collected from 10 seams at 15 locations and have been subjected to a detailed petrographic examination for their characterization. An effort has been made to trace the path of their evolution based on coal petrography-based models. The quantitative petrographic analysis shows that these coals are vitrinite rich (45.0–92.9%, mean 73.4% mmf basis) with low concentration of inertinite (0.0–13.8%, mean 3.0% mmf basis), whereas the liptinite occurs in appreciable concentration (5.5–53.1%, mean 22.5% mmf basis). Further, these coals are rich in vitrite (51.6–100%, mean 78.3% mmf basis). The volatile matter (from 38.5% to 70.0%, d.a.f.) and vitrinite reflectance (Rom from 0.37% to 0.68%) characterize these coals, as per German (DIN) and North American classification, approximately as sub-bituminous ‘C' to high volatile ‘C' bituminous. The occurrence of teleutospore (single, double and triple celled) suggests that these coals have originated from a characteristic Tertiary flora. The maceral and microlithotype composition in the coal petrography-based depositional models suggest that the coals of Garo Hills were formed in reed to open water swamps in telmatic to limnic conditions. The coals of Khasi Hills were dominated by forest swamps and telmatic to limno-telmatic conditions. In addition, the occurrence of large-size resins suggests prolific growth of conifers in the swamps.  相似文献   

8.
Multiple sets of thick coal beds characterized by simple structure and shallow burial depth were developed in the Early and Middle Jurassic strata of the Ordos Basin,northwestern China.The huge reserves of this high quality coal have a high commercial value.We studied the coal’s petrologic characteristics and its maceral distribution to determine the maceral’s contribution to generation of oil and gas.The results show that the Jurassic coals in the Ordos Basin have special penological features because of the Basin’s unique depositional environment which was mainly a series of high-stand swamps in the upper fluvial system.These petrographic features are a result of the development of typical inland lakes where some sand bodies were formed by migrating rivers.After burial,the peat continued to undergo oxidizing conditions,this process generated extensive higher inertinile contents in the coals and the vitrinite components were altered to semi-vitrinite.The macroscopic petrographic types of these Jurassic coals are mainly semi-dull coal,dull coal,semilustrous and lustrous coal.The proportions of semi-dull coal and dull coal are higher in the basin margins,especially in the area near the northern margin.The numbers of semilustrous and lustrous coals increase southwards and towards the central basin.This situation indicates that different coal-forming swamp environments have major controlling effects on the coal components.Another observation is that in the Ordos" coal sequences,especially in the lower part,some sandstone beds are thick,up to 20 m with a coarse grain size.The higher fusinite content in the macerals accompanies a higher semi-vitrinite content with more complete and regular plant cell structure.The fusinite structure is clear and well preserved.After burial,the lithology of the roof and floor rocks can continue to affect the evolution of coal petrology.The sand bodies in the roof and floor exhibit good physical conditions so that pore water can maintain a long-term state of oxidation,circulation and connection to the coal.So coal components remain in an oxidation environment for a long time.Conversely,in the basin center,lacustrine facies developed and peat was rapidly covered by mudstone after burial and subsequent coal beds rapidly entered a reducing environment.As a result,abundant gelatification occurred and the vitrinite content increased.Exinite often accumulated in a specific position in the coal bed.Although the average exinite content is not high on the whole,it does significantly contribute to the total hydrocarbon generation. The exinite content has been underestimated,especially the amorphous bituminous fluid and its importance is emphasized here.The reason is that the fluid flows easily into fusinite which has strong rigidity,or flows into some fissures,where it is commonly neglected.  相似文献   

9.
Low rank coals from two disparate geological settings have been subjected to petrographic and palynological analysis. The stratigraphic units studied and their locations are the Amphitheatre Formation, St Elias Mountains, Yukon Territory, of Eocene to Oligocene age; and the base of the Ravenscrag Formation, south-central Saskatchewan, of latest Cretaceous to earliest Paleocene age.The depositional setting of the Amphitheatre Formation ranges from distal sand-dominated braided stream and lacustrine environments to proximal gravel-dominated fluvial environments. The coals are low in inertinite (< 6%) and mostly high in huminite (> 85%). In localities with a dominance of angiosperm pollen the relative abundance of eu-ulminite B and densinite is greatest whereas in the ones with a dominantly coniferous pollen assemblage eu-ulminite A is the most prominent maceral. These observations suggest as an immediate cause/effect relationship, an at least partial dependance of present maceral content on floral precursors. This in turn probably reflects a certain combination of depositional environment conditions (pH, Eh, temperature, etc.), that likely controlled the plant community and the preservation of vegetal matter.The depositional environment of coals from the basal part of the Ravenscrag Formation contrasts sharply with that of the Amphitheatre. The Ravenscrag coals formed within a low energy, stable, floodplain environment. Palynological and coal maceral profiles for the basal Ravenscrag Formation coal, which spans the Cretaceous-Tertiary boundary, indicates that the environment of deposition progressed from an open canopied swamp forest with areas of open water, through a phase of low-lying to open water swamps with herbaceous, pterophytic vegetation to, at least locally, raised bogs. The change in coal petrography across the Cretaceous-Tertiary boundary is shown to be relatively minor in comparison to subsequent changes in coal petrography in the earliest Paleocene and to changes that occur in the palynological assemblages across the boundary interval.  相似文献   

10.
The coal deposits of southern Africa (Botswana, Malawi, Mozambique, Namibia, South Africa, Swaziland, Tanzania, Zambia and Zimbabwe) are reviewed. The coal seams formed during two periods, the Early Permian (Artinskian–Kungurian) and the Late Permian (Ufimian–Kazanian). The coals are associated with non-marine terrestrial clastic sedimentary sequences, most commonly mudrock and sandstones, assigned to the Karoo Supergroup. The Early Permian coals are most commonly sandstone-hosted while the younger coals typically occur interbedded with mudstones. The sediments were deposited in varying tectono-sedimentary basins such as foreland, intracratonic rifts and intercratonic grabens and half-grabens. The depositional environments that produced the coal-bearing successions were primarily deltaic and fluvial, with some minor shoreline and lacustrine settings. Coals vary in rank from high-volatile bituminous to anthracite and characteristically have a relatively high inertinite component, and medium- to high-ash content. In countries where coal is mined, it is used for power generation, coking coal, synfuel generation, gasification and for (local) domestic household consumption.  相似文献   

11.
The maceral and microlithotype composition of selected coals has been investigated with respect to the grinding properties, specifically Hardgrove grindability index (HGI), of the coals. The study expands upon previous investigations of HGI and coal petrology by adding the dimension of the amount and composition of the microlithotypes. Coal samples, both lithotypes and whole channels, were selected from restricted rank ranges based on vitrinite maximum reflectance: 0.75–0.80% Rmax, 0.85–0.90% Rmax and 0.95–1.00% Rmax. In this manner, the influence of petrographic composition can be isolated from the influence of rank. Previous investigations of high volatile bituminous coals demonstrated that, while rank is an important factor in coal grindability, the amount of liptinite and liptinite-rich microlithotypes is a more influential factor. In this study, we provide further quantitative evidence for the influence of microlithotypes on HGI and, ultimately, on pulverizer performance.  相似文献   

12.
The Gunnedah Basin, NSW, Australia, contains more than 500 Gt of coal, and has been the subject of recent coalbed methane exploration. Large areas of the basin contain igneous intrusions and large areas of coal have been heat-affected as a consequence. A detailed study has been undertaken of coal seams intersected in a cored coalbed methane exploration drillhole in which two sill-form igneous intrusions are present. Comparisons are made between coals that are unaltered and coals that have been heat-affected, using petrographic and chemical data, coal seam gas desorption data, and gas chemical analysis data.Results demonstrate that the two igneous intrusions have had a very positive effect on coalbed methane development. The gas content in a number of heat-affected coal seams within thermal aureoles above and below the sills is substantially higher than in adjacent unaffected coal seams. In addition, the intrusions have had little effect on gas quality. The coals in the heat-affected zone were found to contain gas with approximately 95% methane. The coals in the thermal aureoles were found, under the microscope, to contain characteristic micropores and slits, which collectively may serve to enhance gas adsorption capacity, permeability, and gas desorption. Gas contents below each of the sills is substantially higher than above the sill, confirming earlier results that the sills appear to have acted as a reservoir seal, during and for some time after intrusion. The background coal rank in ACM Yannergee DDH 1 is in the high-volatile bituminous range. The igneous intrusions have resulted in an increase in rank such that large areas of coal have moved into the optimal thermogenic gas generation window. This rank increase has affected a major part of the coal-bearing sequence.  相似文献   

13.
This paper describes coal petrographic characteristics, sulfur abundance, distribution and isotopic signature in coals in the Wuda coalfield, Inner Mongolia, northern China. Petrographic studies suggest that depositional environment influences petrographic composition. The No. 9 and No. 10 coal seams, which are thought to have formed on a tidal delta plain, have high collodetrinite contents (up to 66.1%) indicating enhanced gelification and bacteria activity during coal accumulation, and also have the highest sulfur content (3.46% and 3.42%). Both organic and pyritic sulfur isotope values (−12.3‰ to 5.8‰ and −18.7‰ to 1.1‰, respectively) are variable and generally tend to be more negative in high-sulfur coals than those in low-sulfur coals in the Wuda coalfield. The negative sulfur isotope values indicate that a large portion of sulfur in the high-sulfur coals has a bacterial origin. Sulfur isotopic compositions and variations within the section were used to propose a model to explain the origin of sulfur in these coals. The presence of pyritized rod-like bacteria, cyanophyte's gelatinous sheaths and degraded algae organic matter suggests that bacteria, and perhaps algae, may play an important role in the formation of these high-sulfur coals.  相似文献   

14.
A detailed macro- and micro-petrological investigation of 8 coal seam profiles of Eocene age from the sub-Himalayan zone of Jammu was undertaken in order to characterize them petrographically and to focus on their evolution. The quantitative data suggest that these coals are vitrinite rich, with low concentrations of inertinite and rare occurrences of liptinite. According to microlithotype concentration these coals may be characterized as vitrinite rich, with minor amounts of clarite, vitrinertite and trimacerite. The dominant minerals are clays, siderite and pyrite (occurring mostly as disseminations, cavity filling and in framboidal state). These coals are vitric in type, low volatile bituminous in rank and ashy in grade.The petrographic character and the presence of teleutospores suggest that, similar to other Tertiary coal deposits in the world, the angiosperm flora contributed chiefly to the development of coal facies in the area. The maceral and microlithotype composition shows that these coals originated from the low forest and undisturbed (in situ) peat in foreland basins under limno-telmatic depositional conditions. The water was brackish with regular influxes of fresh water.  相似文献   

15.
The Tertiary North East Indian coals, classified as sub-bituminous rank, have found less industrial application owing to their physico-chemical attributes. These coals are characterized by low ash (<15%), high volatile matter (>35%) and high sulphur (2.9-4.46%). Majority of the sulphur occurs in organic form affixed to the coal matrix owing to marine influence, is difficult to remove. The coal maceral analysis shows the dominance of vitrinite (>75%) with lesser amounts of liptinite and inertinite. Reflectance measurements (Rmax) of these sub-bituminous coals fall in the range of 0.57 to 0.65. In this study, the petrographical (maceral), thermal and other physico-chemical analyses of some low rank Tertiary sub-bituminous coals from north-east India were carried out to assess their potential for combustion, liquefaction and coal bed methane formation. The petrofactor, conversion (%) and oil yield (%), combustion efficiency of the coal samples were determined. The respective linear correlations of conversion (%) of the coals with their vitrinite contents, petrofactor and oil yield values have been discussed. The relative combustion efficiency of the coals was measured from the thermo gravimetric analysis (TGA) of coals. The influence of maceral composition upon gas adsorption characteristics of these high volatile coals showed the increase in methane adsorption with vitrinite enrichment. Both the maceral and mineral matter contents were observed to have important influence on the gas adsorption characteristics.  相似文献   

16.
The Elk Valley coalfield of British Columbia is one of the major coal producing areas in Canada. The coals are of Cretaceous and Jurassic–Cretaceous age and range in rank from high-volatile to low-volatile bituminous (%Romax: 0.8–1.6). Coal seams from outcrops and active mines in this coalfield were analysed for rank and maceral composition using reflected light microscopy, for geochemistry using AAS, INAA, and ICPES, and also by proximate and ultimate analyses. The Elk Valley coal seams contain low average concentrations of hazardous elements such as As, Mo, Pb, and Se. However, there are seams that contain relatively high concentrations of some of these elements, such as 8 mg/kg and 108 mg/kg of arsenic. When the geochemistry of coal seams is compared within the different parts of the coalfield, the elemental composition amongst the seams from various sections located in the central area of the coalfield is similar. Coal seams in the northern area of the coalfield have different geochemistry than coal seams in other areas of the coalfield; seams in the northern area have much higher As, Br, Cr, Cu, Fe, K, and Na content, but contain less Ca.  相似文献   

17.
In the Leão-Butiá Coalfield, Rio Grande do Sul the coal seams occur in the Rio Bonito Formation, Guatá Group, Tubarão Supergroup of the Paraná Basin, Brazil and are of Permian (Artinskian–Kungurian) age.This study is the first detailed investigation on the coal petrographic characterization of the coal-bearing sequence in relation to the depositional settings of the precursor mires, both in terms of whole seam characterization and in-seam variations. The study is based on the analyses of nine coal seams (I2, CI, L4, L3, L2, L1, S3, S2, S1), which were selected from core of borehole D-193, Leão-Butiá and represent the entire coal-bearing sequence.The interpretation of coal facies and depositional environment is based on lithotype, maceral and microlithotype analyses using different facies-critical petrographic indices, which were displayed in coal facies diagrams. The seams are characterized by the predominance of dull lithotypes (dull, banded dull). The dullness of the coal is attributed to relatively high mineral matter, inertinite and liptinite contents. The petrographic composition is dominated by vitrinite (28–70 vol.% mmf) and inertinite (> 30 vol.% mmf) groups. Liptinite contents range from 7 to 30 vol.% (mmf) and mineral matter from 4–30 vol.%. Microlithotypes associations are dominated by vitrite, duroclarite, carbominerite and inertite. It is suggested that the observed vertical variations in petrographic characteristics (lithotypes, microlithotypes, macerals, vitrinite reflectance) were controlled by groundwater level fluctuations in the ancient mires due to different accommodation/peat accumulation rates.Correlation of the borehole strata with the general sequence-stratigraphical setting suggests that the alluvial fan system and the coal-bearing mudstone succession are linked to a late transgressive systems tract of sequence 2. Based on average compositional values obtained from coal facies diagrams, a deposition in a limno-telmatic to limnic coal facies is suggested.  相似文献   

18.
The Late Miocene Muaraenim Formation in southern Sumatra contains thick coal sequences, mostly of low rank ranging from lignite to sub-bituminous, and it is believed that these thick low rank coals are the most prospective for the production of coal seam gas (CSG), otherwise known as coalbed methane (CBM), in Indonesia.As part of a major CSG exploration project, gas exploration drilling operations are being undertaken in Rambutan Gasfields in the Muaraenim Formation to characterize the CSG potential of the coals. The first stage of the project, which is described here, was designed to examine the gas reservoir properties with a focus on coal gas storage capacity and compositional properties. Some five CSG exploration boreholes were drilled in the Rambutan Gasfield, south of Palembang. The exploration boreholes were drilled to depths of ~ 1000 m into the Muaraenim Formation. Five major coal seams were intersected by these holes between the depths of 450 and 1000 m. The petrography of coal samples collected from these seams showed that they are vitrinite rich, with vitrinite contents of more than 75% (on a mineral and moisture free basis). Gas contents of up to 5.8 m3/t were measured for the coal samples. The gas desorbed from coal samples contain mainly methane (CH4) ranging from 80 to 93% and carbon dioxide (CO2) ranging from 6 to 19%. The composition of the gas released into the production borehole/well is, however, much richer in CH4 with about 94 to 98% CH4 and less than 5% CO2.The initial results of drilling and reservoir characterization studies indicate suitable gas recovery parameters for three of the five coal seams with a total thickness of more than 30 m.  相似文献   

19.
Thermally metamorphosed Tertiary age coals from Tanjung Enim in South Sumatra Basin have been investigated by means of petrographic, mineralogical and chemical analyses. These coals were influenced by heat from an andesitic igneous intrusion. The original coal outside the metamorphosed zone is characterized by high moisture content (4.13–11.25 wt.%) and volatile matter content (> 40 wt.%, daf), as well as less than 80 wt.% (daf) carbon and low vitrinite reflectance (VRmax = 0.52–0.76%). Those coals are of subbituminous and high volatile bituminous rank. In contrast the thermally metamorphosed coals are of medium-volatile bituminous to meta-anthracite rank and characterized by low moisture content (only < 3 wt.%) and volatile matter content (< 24 wt.%, daf), as well as high carbon content (> 80 wt.%, daf) and vitrinite reflectance (VRmax = 1.87–6.20%). All the studied coals have a low mineral matter content, except for those which are highly metamorphosed, due to the formation of new minerals.The coalification path of each maceral shows that vitrinite, liptinite and inertinite reflectance converge in a transition zone at VRmax of around 1.5%. Significant decrease of volatile matter occurs in the zone between 0.5% and 2.0% VRmax. A sharp bend occurs at VRmax between 2.0% and 2.5%. Above 2.5%, the volatile matter decreases only very slightly. Between VRr = 0.5% and 2.0%, the carbon content of the coals is ascending drastically. Above 2.5% VRr, the carbon content becomes relatively stable (around 95 wt.%, daf).Vitrinite is the most abundant maceral in low rank coal (69.6–86.2 vol.%). Liptinite and inertinite are minor constituents. In the high rank coal, the thermally altered vitrinite composes 82.4–93.8 vol.%. Mosaic structures can be recognized as groundmasss and crack fillings. The most common minerals found are carbonates, pyrite or marcasite and clay minerals. The latter consist of kaolinite in low rank coal and illite and rectorite in high rank coal. Change of functional groups with rank increase is reflected most of all by the increase of the ratio of aromatic C–H to aliphatic C–H absorbances based on FTIR analysis. The Oxygen Index values of all studied coals are low (OI < 5 mg CO2/g TOC) and the high rank coals have a lower Hydrogen Index (< 130 mg HC/g TOC) than the low rank coals (about 300 mg HC/g TOC). Tmax increases with maturity (420–440 °C for low rank coals and 475–551 °C for high rank coals).Based on the above data, it was calculated that the temperature of contact metamorphism reached 700–750 °C in the most metamorphosed coal.  相似文献   

20.
Jurassic coals, coaly shales, shales and claystones from the Eastern Pontides in NE Turkey have been investigated using microscopical, petrophysical and detailed organic geochemical methods in order to determine their catagenetic stage, to reveal the composition of the organic matter and to discuss the depositional environment. The Liassic–Dogger period in the Eastern Pontides was characterised by the presence of a rift system which resulted in rock units of very variable lithology and facies. Coal seams, ranging from a few centimetres to several decimetres and intercalated with shales, claystones and sandstones occur within the basal part (the Aggi Formation) as well as in the uppermost part (the Hamurkesen Formation) of the rift deposits. All coal seams investigated are at a catagenetic maturation stage corresponding to subbituminous B up to low volatile bituminous ranks. They represent a depositional environment of short-lived swamp areas with intense aerobic reworking of the higher plant detritus by heterotrophic bacteria, but with possible anaerobic microenvironments at deeper levels. At least some coal seams were influenced temporarily by marine ingressions. Most samples are impure humic coals with highly variable chemical compositions as indicated by the broad range of their hydrogen contents. This variation in hydrogen content is partly attributed to variable contributions of algal material. On the other side, considering several analytical results, the hydrogen variation is primarily due to bacterial reworking that affected the composition of the organic matter to variable extent and resulted especially in an enrichment of bacterial lipids. Bacterial reworking by an active microbial community within the upper layer of the peat swamp is inferred from elevated concentrations of iso-alkanes even exceeding those of the corresponding n-alkanes in several samples which, to the best of our knowledge, have not been observed with coals before.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号