共查询到20条相似文献，搜索用时 828 毫秒
1.
Rubble mound breakwaters usually consist of armour, filter and core layers. The units used in the armour layer are natural rock or concrete. Although natural rock is usually preferred, it is not always possible to apply it. There are some advantages to using concrete units: they have a high stability coefficient under wave attack, and they are easily produced at work sites. Tetrapod and cube blocks are widely used in breakwaters as armour units.Rubble mound breakwaters are subjected not only to wave activity but also other types of environmental loading, such as earthquakes. Although rubble-mound breakwaters are most likely the most common type of breakwaters, they have received little attention regarding their response to seismic activity. The objective of this study is to present the dynamic response of a breakwater armoured by tetrapods placed by two different placement methods and armoured by cubes during seismic loadings experimentally and numerically. A shaking tank was developed for the experimental study. The breakwater models sit on a rigid bed, and the model scale is 1/50. A one-dimensional shaking tank was used to understand simple responses of the rubble mound breakwaters under seismic loads. The tank allows only one degree of freedom. A raining crane system was developed to achieve the same packing density and porosity for the core material. The shape of the model breakwater before and after the tests was measured using a profiler and was recorded by computer. However, crest lowering and the level of damage on slopes were determined from profiler records. The dynamic responses of the model breakwaters were also investigated using an image processing technique. For numerical simulation, software using finite element method was used.The results obtained from the experiment and numerical model may help designers build breakwaters armoured by artificial units. 相似文献
2.
Babloo Chaudhary Hemanta Hazarika Siavash Manafi Khajeh Pasha 《Marine Georesources & Geotechnology》2018,36(3):308-322
Coastal protective structures, such as composite breakwaters, are generally vulnerable to earthquake. It was observed that breakwaters damage mainly due to failure of their foundations. However, the seismically induced failure process of breakwater foundation has not been well understood. This study describes failure mechanism of breakwater foundation as well as a newly developed reinforcing model for breakwater foundation that can render resiliency to breakwater against earthquake-related disasters. Steel sheet piles and gabions were used as reinforcing materials for foundation. The experimental program consisted of a series of shaking table tests for conventional and reinforced foundation of breakwater. Numerical analyses were conducted using finite difference method, and it was observed that the numerical models were capable to elucidate the seismic behavior of soil–reinforcement–breakwater system. This paper presents an overview of the results of experimental and numerical studies of the seismic response of breakwater foundation. Overall, the results of these studies show the effectiveness of the reinforced foundation in mitigating the earthquake-induced damage to the breakwater. Moreover, numerical simulation was used for parametric study to determine the effect of different embedment depths of sheet piles on the performance of breakwater foundation subjected to seismic loading. 相似文献
3.
Zhang Fugui Ge Zhijin
Senior Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing 《中国海洋工程》1996,(4)
- Rubble mound breakwater, one of the protection structures, has been widely used in coastal and port engineering. Block stones were first used as its armor layer, and its use was limited to shallow sea areas where there is no large waves. Since the specially-shaped armor unit was developed, the rubble mound breakwater has become the main sort of the protection structures, which can be used in deep water zones where storm sometimes occurs. Owing to severe and complex surrounding conditions, the rubble mound breakwater failure sometimes occurs, thus the study on the causes of failure is of great importance. In the present study some breakwater failures at home and abroad are illustrated and the causes of failure are investigated from the point of view of design, test, construction and maintenance. 相似文献
4.
为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明:基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现“U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。 相似文献
5.
为确保2008北京奥运会青岛帆船比赛基地内工程的水工建筑物安全可靠，对给定的2种防波堤断面结构型式及护面块体稳定性进行物理模型试验。准确掌握在极端高水位、设计高水位、设计低水位和极端低水位时．SW向、25a和50a一遇波浪作用下，试验断面所承受的波浪作用力，及SE向50a一遇波浪作用下块体的稳定重量。并绘制各工况1％峰值波压力分布图，得出断面波压力的分布规律。对断面结构和护面块体稳定性进行分析。 相似文献
6.
7.
This paper provides a stochastic method by which the random wave-induced scour depth at the trunk section of vertical-wall and rubble-mound breakwaters can be derived. Here the formulas for regular wave-induced scour depth provided by Xie [Xie, S.L., 1981. Scouring patterns in front of vertical breakwaters and their influence on the stability of the foundations of the breakwaters. Report. Department of Civil Engineering, Delft University of Technology, Delft, The Netherlands, September, 61 pp.] for vertical-wall breakwater and Sumer and Fredsøe [Sumer, B.M., Fredsøe, J., 2000. Experimental study of 2D scour and its protection at a rubble-mound breakwater. Coast. Eng. 40, 59–87] for rubble-mound breakwater are used. These formulas are combined with describing the waves as a stationary Gaussian narrow-band random process to derive the random wave-induced scour depth. Comparisons are made between the present method and the Sumer and Fredsøe [Sumer, B.M., Fredsøe, J., 2000. Experimental study of 2D scour and its protection at a rubble-mound breakwater. Coast. Eng. 40, 59–87.] random wave scour data for rubble-mound breakwater, as well as the Hughes and Fowler [Hughes, S.A., Fowler, J.A., 1991. Wave-induced scour predictions at vertical walls. ASCE Proc. Conf. Coastal Sediments vol. 91, 1886–1899] random wave scour data and formula for vertical-wall breakwater. A tentative approach to random wave-induced scour at a vertical impermeable submerged breakwater is also suggested. 相似文献
8.
针对现阶段深水软黏土地基防波堤建设的设计理论和稳定性分析方法尚不成熟,结合实际工程,采用三维弹塑性有限元数值分析方法,研究在水平或竖直单一方向荷载以及复合加载条件下软黏土地基上沉箱防波堤的失稳模式,提出破坏包络线的稳定性判别方法。在波浪水平荷载作用下,深水软基上沉箱防波堤发生倾覆失稳破坏,失稳转动点为沉箱底面以下中轴线偏右的某点,不同于规范中规定的岩石或砂质地基沉箱倾覆转动点为其后踵点;在重力等竖向荷载作用下,沉箱的失稳模式为结构整体下陷,抛石基床及地基形成连贯的塑性区域,呈现较明显地冲剪破坏形式;在水平、竖向复合荷载作用下,软基上沉箱防波堤的破坏包络线由结构倾覆破坏线和地基承载力破坏线组成,包络线将荷载组合区分成稳定区、仅发生水平承载力不足倾覆破坏区、仅发生地基竖向承载力不足破坏区、同时发生水平承载力和地基竖向承载力不足破坏区4个区域。研究成果为深水软基沉箱防波堤建设提供参考和借鉴。 相似文献
9.
Mehdi Veiskarami Mir Ahmad Lashteh Neshaei Mehran Karimpour Fard Tina Pourramezan 《Marine Georesources & Geotechnology》2017,35(1):42-51
Marine structures which cover a wide range of offshore and onshore structures are often subjected to different external and internal forces against which a proper design should be performed. Among many, breakwaters constructed over a relatively loose agglomerate of granular soils are much prone to deep seated failure extended beneath the foundation. This type of failure has been given less attention in conventional design approaches. Stability analysis of such failures is the main subject of this research which includes both the static and the seismic stability of breakwaters over granular marine soils. As the subsoil strata in sea beds often comprise loose sand deposits, it is more convenient to assume a rather small angle of dilation, at least at failure, which certainly reduces the potential to resist geotechnical instabilities. The method of stress characteristics along with slight modifications to handle this issue has been used to assess the overall stability of breakwaters against deep seated failures. Investigations revealed that while even under static condition, there is certain potential of failure, under seismic condition, the risk is quite very high. A series of design charts are also developed presenting the factor of stability as a measure of safety against such failure. 相似文献
10.
Chen Guoping Wang Hong Hu Zhinong
Master Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing
Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing 《中国海洋工程》1996,(2)
This paper mainly deals with the simulation on the strength of the concrete armor block in model test. According to the requirement for the strength of blocks in models with various scales, the components of materials for model blocks and their proportions are determined. The failure of armor blocks on rubble-mound breakwaters is reproduced by model tests. 相似文献
11.
带胸墙斜坡堤越波量的试验研究 总被引：1，自引：0，他引：1
带胸墙斜坡式防波堤堤顶标高的合理确定，有赖于越波量的正确计算。本文基于水力学中流量系数的概念，建立越波量的计算公式。对影响流量系数的几个主要因素：波高、波陡、胸墙高、平台宽度、相对水深和护面结构等，进行了较系统的试验和讨论，提出了确定流量系数的经验公式。另外，还根据越波量的大小及越波波态，将堤分为：不越水堤、少量越水堤、越水堤及半潜堤四类，可作为合理确定堤顶标高时参考。 相似文献
12.
Berms deployed at the toe of conventional rubble mound breakwaters can be very effective in improving the stability of the armor layer. Indeed, their design is commonly tackled by paying attention to armor elements dimensioning. Past research studies showed how submerged berms can increase the stability of the armor layer if compared to straight sloped conventional breakwaters without a berm. To fill the gap of knowledge related to the interaction between breakwaters with submerged berm, waves and soil, this research aims to evaluate how submerged berms configuration influences the seabed soil response and momentary liquefaction occurrences around and beneath breakwaters foundation, under dynamic wave loading. The effects of submerged berms on the incident waves transformation have been evaluated by means of a phase resolving numerical model for simulating non-hydrostatic, free-surface, rotational flows. The soil response to wave-induced seabed pressures has been evaluated by using an ad-hoc anisotropic poro-elastic soil solver. Once the evaluation of the seabed consolidation state due to the presence of the breakwater has been performed, the dynamic interaction among water waves, soil and structure has been analyzed by using a one-way coupling boundary condition. A parametric study has been carried out by varying the berm configuration (i.e. its height and its length), keeping constant the offshore regular wave condition, the berm and armor layer porosity values, the water depth and the elastic properties of the soil. Results indicate that the presence of submerged berms tends to mitigate the liquefaction probability if compared to straight sloped conventional breakwater without a berm. In addition, it appears that the momentary liquefaction phenomena are more influenced by changing the berm length rather than the berm height. 相似文献
13.
Masoud Rabeti Moghadam Alireza Sadeghi Abdollahi 《Marine Georesources & Geotechnology》2017,35(3):376-396
Breakwaters provide a calm sea basin for ships and protect harbor facilities by reflecting wave energy toward the open sea area. Their performance under environmental loadings is the main concern for coastal engineers. Liquefaction susceptibility of loose sediments of seabed threatens performance of these structures. The article investigates soil liquefaction effects on the seismic performance of Iran liquefied natural gas (LNG) composite breakwater. Performance-based design method, considering both grade of the breakwater and acceptable level of damages, was selected as design philosophy. Liquefaction-induced damages to the breakwater were determined by numerical analysis. Since the obtained level of deformations did not meet allowable damages, soil improvement against liquefaction was considered. Different improvement patterns were proposed based on distribution of pore pressure ratio (ru) beneath the breakwater to control its seismic performance. This investigation revealed that the most important area for soil improvement is located near the toes of breakwater to control the slope instability and performance of the breakwater. 相似文献
14.
Dong Hyawn KIM 《中国海洋工程》2014,(6):739-748
A new load surface based approach to the reliability analysis of caisson-type breakwater is proposed. Uncertainties of the horizontal and vertical wave loads acting on breakwater are considered by using the so-called load surfaces, which can be estimated as functions of wave height, water level, and so on. Then, the first-order reliability method（FORM） can be applied to determine the probability of failure under the wave action. In this way, the reliability analysis of breakwaters with uncertainties both in wave height and in water level is possible. Moreover, the uncertainty in wave breaking can be taken into account by considering a random variable for wave height ratio which relates the significant wave height to the maximum wave height. The proposed approach is applied numerically to the reliability analysis of caisson breakwater under wave attack that may undergo partial or full wave breaking. 相似文献
15.
16.
基于开源程序REEF3D,通过建立高精度二维数值波浪水槽,系统研究了聚焦波浪在浅堤上传播变形的规律,着重分析了聚焦波浪通过浅堤的水动力过程及能量变化规律,讨论了不同波浪要素对聚焦波浪传播特性的影响。除此之外,还考虑了双浅堤布置对聚焦波浪传播变形的影响。研究结果表明:极端波浪通过浅堤时,堤顶水深越小,波浪主频能量衰减越显著。在给定堤顶水深条件下,聚焦点与浅堤的相对位置对聚焦波浪能量的衰减影响较小。在双浅堤布置条件下,随着浅堤间距的增加,上下游浅堤的相互影响逐渐减弱,高频段的波浪能量也随之减小。 相似文献
17.
Numerical prediction of performance of submerged breakwaters 总被引：1，自引：0，他引：1
The results of a numerical model study on the transmission characteristics of a submerged breakwater are presented. Study aimed to determine the effect of depth of submergence, crest width, initial wave conditions and material properties on the transmission characteristics of the submerged breakwater. The results highlight the optimum crest width of the breakwater and optimum clear spacing between two breakwaters. A submerged permeable breakwater with ds/d=0.5, p=0.3 and f=1.0, reduces the transmission coefficient by about 10% than the impermeable breakwater. The results indicates an optimum width ratio of B/d=0.75 for achieving minimum transmission. By restricting the effective width ratio of the series of breakwaters to 0.75, studies were conducted to determine the effect of clear spacing between breakwaters on transmission coefficient, suggesting an optimum clear spacing of w/b=2.00 to obtain Kt below 0.6. 相似文献
18.
The numerical model COBRAS-UC [Losada, I.J., Lara, J.L., Guanche,R., Gonzalez-Ondina, J.M. (2008). Numerical analysis of wave overtopping of rubble mound breakwaters. Coastal Engineering, Vol 55 (1), 47–62.] is used to carry out a two-dimensional analysis of wave induced loads on coastal structures. The model calculates pressure, forces and moments for two different cross-sections corresponding to a low-mound and a conventional rubble-mound breakwater with a crown-wall under regular and irregular incident wave conditions. Predicted results are compared with experimental information provided in Losada et al. [Losada, I.J., Lara, J.L., Guanche,R., Gonzalez-Ondina, J.M. (2008). Numerical analysis of wave overtopping of rubble mound breakwaters. Coastal Engineering, Vol 55 (1), 47–62.] and Lara et al. [Lara, J.L., Losada, I.J., Guanche, R. (2008). “Wave interaction with low mound breakwaters using a RANS model”. Ocean engineering (35), pp 1388–1400; doi:10.1016/j.oceaneng.2008.05.006.] on a 1:20 scale. Good agreement is found, and the differences between both typologies are explained in detail. Additionally, numerical results are also compared with several semi-empirical formulae recommended for design at both the 1:20 model scale and two prototype cross-sections. Results suggest that COBRAS-UC is able to provide realistic stability information that can be used to complete the approach based on currently existing methods and tools. 相似文献
19.
Chai Changqing Chief Engineer First Navigational Engineering Bureau Ministry of Communications of China Jianjin 《中国海洋工程》1994,(1)
-The construction of breakwaters in China in more than 40 years since the founding of the People's Republic of China is reviewed. The construction of two main types of breakwater, upright breakwaters and rubble mound breakwaters, and the way in which they are built are expounded. Recommendations to improve the technology for future breakwater construction are presented. 相似文献
20.
The application of directional waves in design processes has clearly received much interest during recent years. Thus, in model testing with moored ships and offshore structures, significant deviations have been revealed between results obtained in traditional uni-directional wave trains and those obtained in directional wave fields. Whether the same tendency is valid in connection with the design of rubble mound breakwaters is studied in the present project. A breakwater with a front slope of 1:2 is tested at the scale 1:40. The weight and diameter of the stones in the core, filter and armour layers were carefully selected, and the sources of scatter in repeated tests were minimized. Furthermore, the incident wave energy was accurately adjusted to keep the same level in both uni-directional and directional waves. For the actual rubble-mound breakwater unambiguous results were obtained. When uni-directional waves were applied, the damage increased by 30–50% relative to the directional wave situation. 相似文献