首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 906 毫秒
1.
Velocities of compressional and shear waves in limestones   总被引：2，自引：1，他引：2  
Carbonate rocks are important hydrocarbon reservoir rocks with complex textures and petrophysical properties (porosity and permeability) mainly resulting from various diagenetic processes (compaction, dissolution, precipitation, cementation, etc.). These complexities make prediction of reservoir characteristics (e.g. porosity and permeability) from their seismic properties very difficult. To explore the relationship between the seismic, petrophysical and geological properties, ultrasonic compressional‐ and shear‐wave velocity measurements were made under a simulated in situ condition of pressure (50 MPa hydrostatic effective pressure) at frequencies of approximately 0.85 MHz and 0.7 MHz, respectively, using a pulse‐echo method. The measurements were made both in vacuum‐dry and fully saturated conditions in oolitic limestones of the Great Oolite Formation of southern England. Some of the rocks were fully saturated with oil. The acoustic measurements were supplemented by porosity and permeability measurements, petrological and pore geometry studies of resin‐impregnated polished thin sections, X‐ray diffraction analyses and scanning electron microscope studies to investigate submicroscopic textures and micropores. It is shown that the compressional‐ and shear‐wave velocities (Vp and Vs, respectively) decrease with increasing porosity and that Vp decreases approximately twice as fast as Vs. The systematic differences in pore structures (e.g. the aspect ratio) of the limestones produce large residuals in the velocity versus porosity relationship. It is demonstrated that the velocity versus porosity relationship can be improved by removing the pore‐structure‐dependent variations from the residuals. The introduction of water into the pore space decreases the shear moduli of the rocks by about 2 GPa, suggesting that there exists a fluid/matrix interaction at grain contacts, which reduces the rigidity. The predicted Biot–Gassmann velocity values are greater than the measured velocity values due to the rock–fluid interaction. This is not accounted for in the Biot–Gassmann velocity models and velocity dispersion due to a local flow mechanism. The velocities predicted by the Raymer and time‐average relationships overestimated the measured velocities even more than the Biot model.  相似文献   

2.
This paper part one is set out to lay primary observations of experimental compaction measurements to form the basis for rock physics modelling in paper part two. P- and S-wave velocities and corresponding petrophysical (porosity and density) properties of seven unconsolidated natural sands with different mineralogical compositions and textures are reported. The samples were compacted in a uniaxial strain configuration from 0.5 up to 30 MPa effective stresses. Each sand sample was subjected to three loading cycles to study the influence of stress reduction on acoustic velocities and rock physical properties with the key focus on simulating a complex burial history with periods of uplift. Results show significant differences in rock physical properties between normal compaction and overconsolidation (unloaded and reloaded). The differences observed for total porosity, density, and P- and S-wave velocities are attributed to irrecoverable permanent deformation. Microtextural differences affect petrophysical, acoustic, elastic and mechanical properties, mostly during normal consolidation but are less significant during unloading and reloading. Different pre-consolidation stress magnitudes, stress conditions (isotropic or uniaxial) and mineral compositions do not significantly affect the change in porosity and velocities during unloading as a similar steep velocity–porosity gradient is observed. The magnitude of change in the total porosity is low compared to the associated change in P- and S-wave velocities during stress release. This can be explained by the different sensitivity of the porosity and acoustic properties (velocities) to the change in stress. Stress reduction during unloading yields maximum changes in the total porosity, P- and S-wave velocities of 5%, 25%, and 50%, respectively. These proportions constitute the basis for the following empirical (approximation) correlations: Δϕ ∼ ±5 ΔVP and ΔVP ∼ ±2ΔVS. The patterns observed in the experiments are similar to well log data from the Barents Sea. Applications to rock physics modelling and reservoir monitoring are reported in a companion paper.  相似文献   

3.
We have studied 56 unfractured chalk samples of the Upper Cretaceous Tor Formation of the Dan, South Arne and Gorm Fields, Danish North Sea. The samples have porosities of between 14% and 45% and calcite content of over 95%. The ultrasonic compressional‐ and shear‐wave velocities (VP and VS) for dry and water‐saturated samples were measured at up to 75 bar confining hydrostatic pressure corresponding to effective stress in the reservoir. The porosity is the main control of the ultrasonic velocities and therefore of the elastic moduli. The elastic moduli are slightly higher for samples from the South Arne Field than from the Dan Field for identical porosities. This difference may be due to textural differences between the chalk at the two locations because we observe that large grains (i.e. filled microfossils and fossil fragments) that occur more frequently in samples from the Dan Field have a porosity‐reducing effect and that samples rich in large grains have a relatively low porosity for a given P‐wave modulus. The clay content in the samples is low and is mainly represented by either kaolinite or smectite; samples with smectite have a lower P‐wave modulus than samples with kaolinite at equal porosity. We find that ultrasonic VP and VS of dry chalk samples can be satisfactorily estimated with Gassmann's relationships from data for water‐saturated samples. A pronounced difference between the VP/VS ratios for dry and water‐saturated chalk samples indicates promising results for seismic amplitude‐versus‐offset analyses.  相似文献   

4.
Ultrasonic compressional‐ and shear‐wave velocities have been measured on 34 samples of sandstones from hydrocarbon reservoirs. The sandstones are all of low clay content, high porosity, and cover a wide range of permeabilities. They were measured dry and brine‐saturated under hydrostatic effective stresses of 10, 20 and 40 MPa. For eight of the sandstones, ultrasonic velocity measurements were made at different partial water saturations in the range from dry to fully saturated. The Gassmann–Biot theory is found to account for most of the changes in velocities at high effective stress levels when the dry sandstones are fully saturated with brine, provided the lower velocities resulting when the dry sandstone initially adsorbs small amounts of moisture are used to determine the elastic properties of the ‘dry’ sandstone. At lower effective stress levels, local flow phenomena due to the presence of open microcracks are assumed to be responsible for measured velocities higher than those predicted by the theory. The partial saturation results are modelled fairly closely by the Gassmann–Biot theory, assuming heterogeneous saturation for P‐waves.  相似文献   

5.
Ultrasonic compressional (V p ) and shear (V s ) velocities have been measured on artificial sand-clay mixtures. The measurements were carried out in a drained triaxial load cell using a pulse transition method. The measuring device was equiped with a waveform storage facility. The investigated mixtures consisted mainly of kaolinite and quartz sand. Some mixtures also contained Na-montmorillonite, illites or quartz-flour. The acoustic behaviour was observed during a pressure increase up to 72 MPa vertical and 36 MPa horizontal pressure. At a given pressure,V p andV s in pure sand turned out to be similar to those in pure kaolinite. As predicted by the sand-clay model of Marion (1990), a velocity maximum corresponds to a minimum in total porosity. This porosity minimum marks the transition from a clayey sand to a sandy clay. It is not only reflected in bothV p andV s , but also in the quality of the received pulse. The effective tension of the received signal during 20µs after the first arrival, was used as an indication for P-wave pulse attenuation. This apparent attenuation decreases with increasing clay content and increases with increasing porosity. It is shown that clay mineralogy does not measurably affect wave velocities in clayey sands.  相似文献   

6.
Controls on sonic velocity in carbonates   总被引：2，自引：0，他引：2  
Compressional and shear-wave velocities (V p andV s) of 210 minicores of carbonates from different areas and ages were measured under variable confining and pore-fluid pressures. The lithologies of the samples range from unconsolidated carbonate mud to completely lithified limestones. The velocity measurements enable us to relate velocity variations in carbonates to factors such as mineralogy, porosity, pore types and density and to quantify the velocity effects of compaction and other diagenetic alterations.Pure carbonate rocks show, unlike siliciclastic or shaly sediments, little direct correlation between acoustic properties (V p andV s) with age or burial depth of the sediments so that velocity inversions with increasing depth are common. Rather, sonic velocity in carbonates is controlled by the combined effect of depositional lithology and several post-depositional processes, such as cementation or dissolution, which results in fabrics specific to carbonates. These diagenetic fabrics can be directly correlated to the sonic velocity of the rocks.At 8 MPa effective pressureV p ranges from 1700 to 6500 m/s, andV s ranges from 800 to 3400 m/s. This range is mainly caused by variations in the amount and type of porosity and not by variations in mineralogy. In general, the measured velocities show a positive correlation with density and an inverse correlation with porosity, but departures from the general trends of correlation can be as high as 2500 m/s. These deviations can be explained by the occurrence of different pore types that form during specific diagenetic phases. Our data set further suggests that commonly used correlations like Gardner's Law (V p-density) or the time-average-equation (V p-porosity) should be significantly modified towards higher velocities before being applied to carbonates.The velocity measurements of unconsolidated carbonate mud at different stages of experimental compaction show that the velocity increase due to compaction is lower than the observed velocity increase at decreasing porosities in natural rocks. This discrepancy shows that diagenetic changes that accompany compaction influence velocity more than solely compaction at increasing overburden pressure.The susceptibility of carbonates to diagenetic changes, that occur far more quickly than compaction, causes a special velocity distribution in carbonates and complicates velocity estimations. By assigning characteristic velocity patterns to the observed diagenetic processes, we are able to link sonic velocity to the diagenetic stage of the rock.  相似文献   

7.
An inclusion model, based on the Kuster–Toksöz effective medium theory along with Gassmann theory, is tested to forward model velocities for fluid-saturated rocks. A simulated annealing algorithm, along with the inclusion model, effectively inverts measured compressional velocity (VP) to achieve an effective pore aspect ratio at each depth in a depth variant manner, continuously along with depth. Early Cretaceous syn-rift clastic sediments at two different depth intervals from two wells [well A (2160–2274 m) and well B (5222–5303 m)], in the Krishna–Godavari basin, India, are used for this study. Shear velocity (VS) estimated using modelled pore aspect ratio offers a high correlation coefficient (>0.95 for both the wells) with measured data. The modelled pore aspect ratio distribution suggests the decrease in pore aspect ratio for the deeper interval, mainly due to increased effective vertical stress. The pore aspect ratio analysis in relation to total porosity and volume of clay reveals that the clay volume has insignificant influence in shaping the pore geometry in the studied intervals. An approach based on multiple linear regression method effectively predicts velocity as a linear function of total porosity, the volume of clay and the modelled pore-space aspect ratio of the rock. We achieved a significant match between measured and predicted velocities. The correlation coefficients between measured and modelled velocities are considerably high (approximately 0.85 and 0.8, for VP and VS, respectively). This process indicates the possible influence of pore geometry along with total porosity and volume of clay on velocity.  相似文献   

8.
Part one of this paper reported results from experimental compaction measurements of unconsolidated natural sand samples with different mineralogical compositions and textures. The experimental setup was designed with several cycles of stress loading and unloading applied to the samples. The setup was aimed to simulate a stress condition where sediments underwent episodes of compaction, uplift and erosion. P-wave and S-wave velocities and corresponding petrophysical (porosity and density) properties were reported. In this second part of the paper, rock physics modelling utilizing existing rock physics models to evaluate the model validity for measured data from part one were presented. The results show that a friable sand model, which was established for normally compacted sediments is also capable of describing overconsolidated sediments. The velocity–porosity data plotted along the friable sand lines not only describe sorting deterioration, as has been traditionally explained by other studies, but also variations in pre-consolidation stress or degree of stress release. The deviation of the overconsolidated sands away from the normal compaction trend on the VP/VS and acoustic impedance space shows that various stress paths can be predicted on this domain when utilizing rock physics templates. Fluid saturation sensitivity is found to be lower in overconsolidated sands compared to normally consolidated sands. The sensitivity decreases with increasing pre-consolidation stress. This means detectability for four-dimensional fluid saturation changes can be affected if sediments were pre-stressed and unloaded. Well log data from the Barents Sea show similar patterns to the experimental sand data. The findings allow the development of better rock physics diagnostics of unloaded sediments, and the understanding of expected 4D seismic response during time-lapse seismic monitoring of uplifted basins. The studied outcomes also reveal an insight into the friable sand model that its diagnostic value is not only for describing sorting microtextures, but also pre-consolidation stress history. The outcome extends the model application for pre-consolidation stress estimation, for any unconsolidated sands experiencing similar unloading stress conditions to this study.  相似文献   

9.
Permeability, storage capacity and volumetric strain were measured in situ during deformation of hot-pressed calcite aggregates containing 10, 20, and 30 wt% quartz. Both isostatic and conventional triaxial loading conditions were used. The tests were performed at confining pressure of 300 MPa, pore pressures between 50 to 290 MPa, temperatures from 673 to 873 K and strain rates of 3 × 10−5 s−1. Argon gas was used as the pore fluid. The initial porosities of the starting samples varied from 5% to 9%, with higher porosity correlated to higher quartz content. Microstructural observations after the experiment indicate two kinds of pores are present: 1) Angular, crack-like pores along boundaries between quartz grains or between quartz and calcite grains and 2) equant and tubular voids within the calcite matrix. Under isostatic loading conditions, the compaction rate covaries with porosity and increases with increasing effective pressure. Most of the permeability reduction induced during compaction is irreversible and probably owes to plastic processes. As has been found in previous studies on hot-pressed calcite aggregates, permeability, k, is nonlinearly related to porosity, ϕ. Over small changes in porosity, the two parameters are approximately related as k ∝ ϕn. The exponent n strongly increases as porosity decreases to a finite value (from about 4 to 6% depending on quartz content), suggesting a porosity percolation threshold. When subjected to triaxial deformation, the calcite-quartz aggregates exhibit shear-enhanced compaction, but permeability does not decrease as rapidly as it does under isostatic conditions. During triaxial compaction the exponent n only varies between 2 and 3. Non-isostatic deformation seems to reduce the percolation threshold, and, in fact, enhances the permeability relative to that at the same porosity during isostatic compaction. Our data provide constraints on the governing parameters of the compaction theory which describes fluid flow through a viscous matrix, and may have important implications for expulsion of sedimentary fluids, for fluid flow during deformation and metamorphism, and melt extraction from partially molten rocks.  相似文献   

10.
A model has been developed to relate the velocities of acoustic waves Vp and Vs in unconsolidated permafrost to the porosity and extent of freezing of the interstitial water. The permafrost is idealized as an assemblage of spherical quartz grains embedded in a matrix composed of spherical inclusions of water in ice. The wave-scattering theory of Kuster and Toksoz is used to determine the effective elastic moduli, and hence the acoustic velocities. The model predicts Vp and Vs to be decreasing functions of both the porosity and the water-to-ice ratio. The theory has been applied to laboratory measurements of Vp and Vs in 31 permafrost samples from the North American Arctic. Although no direct measurements were made of the extent of freezing in these samples, the data are consistent with the predictions of the model. Electrical resistivity measurements on the permafrost samples have demonstrated their essentially resistive behaviour. The ratio of resistivity of permafrost in its frozen state to that in its unfrozen state has been related to the extent of freezing in the samples. Electromagnetic and seismic reflection surveys can be used together in areas of permafrost: firstly an EM survey to determine the extent of freezing and then the acoustic velocity model to predict the velocities in the permafrost. The necessary transit time corrections can thus be made on seismic reflection records to compensate for the presence of permafrost.  相似文献   

11.
Sedimentological, compositional and geochemical determinations were carried out on 54 desert and coastal dune sand samples to study the provenance of desert and coastal dunes of the Altar Desert, Sonora, Mexico. Grain size distributions of the desert dune sands are influenced by the Colorado River Delta sediment supply and wind selectiveness. The desert dune sands are derived mainly from the quartz‐rich Colorado River Delta sediments and sedimentary lithics. The dune height does not exert a control over the grain size distributions of the desert dune sands. The quartz enrichment of the desert dune sands may be due to wind sorting, which concentrates more quartz grains, and to the aeolian activity, which has depleted the feldspar grains through subaerial collisions. The desert dune sands suffer from little chemical weathering and they are chemically homogeneous, with chemical alteration indices similar to those found in other deserts of the world. The desert sands have been more influenced by sedimentary and granitic sources. This is supported by the fact that Ba and Sr concentration values of the desert sands are within the range of the Ba and Sr concentration values of the Colorado River quartz‐rich sediments. The Sr values are also linked to the presence of Ca‐bearing minerals. The Zr values are linked to the sedimentary sources and heavy mineral content in the desert dunes. The Golfo de Santa Clara and Puerto Peñasco coastal dune sands are influenced by long shore drift, tidal and aeolian processes. Coarse grains are found on the flanks whereas fine grains are on the crest of the dunes. High tidal regimens, long shore drift and supply from Colorado Delta River sediments produce quartz‐rich sands on the beach that are subsequently transported into the coastal dunes. Outcrops of Quaternary sedimentary rocks and granitic sources increase the sedimentary and plutonic lithic content of the coastal dune sands. The chemical index of alteration (CIA) values for the desert and coastal dune sands indicate that both dune types are chemically homogeneous. The trace element values for the coastal dune sands are similar to those found for the desert dune sands. However, an increase in Sr content in the coastal dune sands may be due to more CaCO3 of biogenic origin as compared to the desert dune sands. Correlations between the studied parameters show that the dune sands are controlled by sedimentary sources (e.g. Colorado River Delta sediments), since heavy minerals are present in low percentages in the dune sands, probably due to little heavy mineral content from the source sediment; grain sizes in the dune sands are coarser than those in which heavy minerals are found and/or the wind speed might not exert a potential entrainment effect on the heavy mineral fractions to be transported into the dune. A cluster analysis shows that the El Pinacate group is significantly different from the rest of the dune sands in terms of the grain‐size parameters due to longer transport of the sands and the long distance from the source sediment, whereas the Puerto Peñasco coastal dune sands are different from the rest of the groups in terms of their geochemistry, probably caused by their high CaCO3 content and slight decrease in the CIA value. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

12.
Elastic behaviour of North Sea chalk: A well-log study   总被引：1，自引：1，他引：0  
We present two different elastic models for, respectively, cemented and uncemented North Sea chalk well‐log data. We find that low Biot coefficients correlate with anomalously low cementation factors from resistivity measurements at low porosity and we interpret this as an indication of cementation. In contrast, higher Biot coefficients and correspondingly higher cementation factors characterize uncemented chalk for the same (low) porosity. Accordingly, the Poisson's ratio–porosity relationship for cemented chalk is different from that of uncemented chalk. We have tested the application of the self‐consistent approximation, which here represents the unrelaxed scenario where the pore spaces of the rock are assumed to be isolated, and the Gassmann theory, which assumes that pore spaces are connected, as tools for predicting the effect of hydrocarbons from the elastic properties of brine‐saturated North Sea reservoir chalk. In the acoustic impedance–Poisson's ratio plane, we forecast variations in porosity and hydrocarbon saturation from their influence on the elastic behaviour of the chalk. The Gassmann model and the self‐consistent approximation give roughly similar predictions of the effect of fluid on acoustic impedance and Poisson's ratio, but we find that the high‐frequency self‐consistent approach gives a somewhat smaller predicted fluid‐saturation effect on Poisson's ratio than the low‐frequency Gassmann model. The Gassmann prediction for the near and potentially invaded zone corresponds more closely to logging data than the Gassmann prediction for the far, virgin zone. We thus conclude that the Gassmann approach predicts hydrocarbons accurately in chalk in the sonic‐frequency domain, but the fluid effects as recorded by the acoustic tool are significantly affected by invasion of mud filtrate. The amplitude‐versus‐angle (AVA) response for the general North Sea sequence of shale overlying chalk is predicted as a function of porosity and pore‐fill. The AVA response of both cemented and uncemented chalk generally shows a declining reflectivity coefficient versus offset and a decreasing normal‐incidence reflectivity with increasing porosity. However, for the uncemented model, a phase reversal will appear at a relatively lower porosity compared to the cemented model.  相似文献   

13.
This paper describes the measurements of the acoustic and petrophysical properties of two suites of low‐shale sandstone samples from North Sea hydrocarbon reservoirs, under simulated reservoir conditions. The acoustic velocities and quality factors of the samples, saturated with different pore fluids (brine, dead oil and kerosene), were measured at a frequency of about 0.8 MHz and over a range of pressures from 5 MPa to 40 MPa. The compressional‐wave velocity is strongly correlated with the shear‐wave velocity in this suite of rocks. The ratio VP/VS varies significantly with change of both pore‐fluid type and differential pressure, confirming the usefulness of this parameter for seismic monitoring of producing reservoirs. The results of quality factor measurements were compared with predictions from Biot‐flow and squirt‐flow loss mechanisms. The results suggested that the dominating loss in these samples is due to squirt‐flow of fluid between the pores of various geometries. The contribution of the Biot‐flow loss mechanism to the total loss is negligible. The compressional‐wave quality factor was shown to be inversely correlated with rock permeability, suggesting the possibility of using attenuation as a permeability indicator tool in low‐shale, high‐porosity sandstone reservoirs.  相似文献   

14.
Ultrahigh-pressure (UHP) eclogites often show strong plastic deformation and anisotropy of seismic properties. We report in this paper the seismic velocity and anisotropy of eclogite calculated from the crystallographic preferred orientations (CPOs) of constituent minerals (garnet, omphacite, quartz and rutile) and single crystal elastic properties. We also compared the calculated results with the measured results in similar eclogites. Our results suggest that (1) Except that garnet is a seismically quasi-isotropic mineral, omphacite, quartz, coesite and rutile all have strong seismic anisotropies (AVp = 23.0%―40.9%, Max. AVs = 18.5%―47.1%). They are the major sources for anisotropy in eclogite. The average seismic velocities are fast in garnet and rutile, moderate in omphacite and coesite, and slow in quartz. (2) The deformed eclogites have the maximum Vp (8.33―8.75 km/s) approximately parallel to foliation and lineation, the minimum Vp (8.25―8.62 km/s) approximately normal to foliation and lineation and the Vp anisotropies of 1.0―1.7%. Their Vs are 4.93―4.97 km/s. The corresponding maximum anisotropies (0.73%―1.78%) of Vs are at 45° to both foliation and lineation and the minimum anisotropies at positions normal to lineation on the foliation plane. The Vs1 polarization planes are approximately parallel to foliation. The mean Vp and Vs of eclogite under UHP peak metamorphism conditions (P = 3―5 GPa, T = 900―1100℃) are estimated to be 3.4%―7.2% and 6.3%―12.1% higher than those at ambient pressure and temperature conditions, respectively. (3) Omphacite component dominates the anisotropy of eclogite while garnet component reduces the anisotropy and increases the seismic velocities. Quartz component has a small effect on the anisotropy but reduces the seismic velocities of eclogite. The effect of rutile component is negligible on seismic properties of eclogite due to its trivial volume fraction. (4) The increase of volume fraction of omphacite in eclogite will reduce the seismic velocities and increase the anisotropy. Omphacitite has seismic velocities reduced by 6%―8% and anisotropies increased to 3%―4% compared to those of garnetite. Our results suggest that the seismic properties calculated with single crystal elastic properties and CPOs are equivalent to those measured in laboratory. Moreover, it provides insights into the mineral physical interpretations of eclogite seismic properties.  相似文献   

15.
This paper tests the ability of various rock physics models to predict seismic velocities in shallow unconsolidated sands by comparing the estimates to P and S sonic logs collected in a shallow sand layer and ultrasonic laboratory data of an unconsolidated sand sample. The model fits are also evaluated with respect to the conventional model for unconsolidated sand. Our main approach is to use Hertz‐Mindlin and Walton contact theories, assuming different weight fractions of smooth and rough contact behaviours, to predict the elastic properties of the high porosity point. Using either the Hertz‐Mindlin or Walton theories with rough contact behaviour to define the high porosity endpoint gives an over‐prediction of the velocities. The P‐velocity is overpredicted by a factor of ～1.5 and the S‐velocity by a factor of ～1.8 for highly porous gas‐sand. The degree of misprediction decreases with increasing water saturation and porosity.Using the Hertz‐Mindlin theory with smooth contact behaviour or weighted Walton models gives a better fit to the data, although the data are best described using the Walton smooth model. To predict the properties at the lower porosities, the choice of bounding model attached to the Walton Smooth model controls the degree of fit to the data, where the Reuss bound best captures the porosity variations of dry and wet sands in this case since they are caused by depositional differences. The empirical models based on lab experiments on unconsolidated sand also fit the velocity data measured by sonic logs in situ, which gives improved confidence in using lab‐derived results.  相似文献   

16.
The relationship between Vp and Vs may be used to predict Vs where only Vp is known. Vp/Vs is also used to identify pore fluids from seismic data and amplitude variation with offset analysis. Theoretical, physical, as well as statistical empirical Vp‐Vs relationships have been proposed for reservoir characterization when shear‐wave data are not available. In published work, the focus is primarily on the Vp‐Vs relationship of quartzitic sandstone. In order to broaden the picture we present Vp‐Vs relationships of greensand composed of quartz and glauconite by using data from the Paleocene greensand Nini oil field in the North Sea. A Vp‐Vs relationship derived from modelling is compared with empirical Vp‐Vs regressions from laboratory data as well as from log data. The accuracy of Vs prediction is quantified in terms of root‐mean‐square error. We find that the Vp‐Vs relationship derived from modelling works well for greensand shear‐wave velocity prediction. We model the seismic response of glauconitic greensand by using laboratory data from the Nini field. Our studies here reveal that brine‐saturated glauconitic greensand can have a similar seismic response to that from oil‐saturated quartzitic sandstone and that oil‐saturated strongly cemented greensand can have a similar amplitude variation with offset response to that from brine‐saturated weakly cemented greensand.  相似文献   

17.
We design a velocity–porosity model for sand-shale environments with the emphasis on its application to petrophysical interpretation of compressional and shear velocities. In order to achieve this objective, we extend the velocity–porosity model proposed by Krief et al., to account for the effect of clay content in sandstones, using the published laboratory experiments on rocks and well log data in a wide range of porosities and clay contents. The model of Krief et al. works well for clean compacted rocks. It assumes that compressional and shear velocities in a porous fluid-saturated rock obey Gassmann formulae with the Biot compliance coefficient. In order to use this model for clay-rich rocks, we assume that the bulk and shear moduli of the grain material, and the dependence of the compliance on porosity, are functions of the clay content. Statistical analysis of published laboratory data shows that the moduli of the matrix grain material are best defined by low Hashin–Shtrikman bounds. The parameters of the model include the bulk and shear moduli of the sand and clay mineral components as well as coefficients which define the dependence of the bulk and shear compliance on porosity and clay content. The constants of the model are determined by a multivariate non-linear regression fit for P- and S-velocities as functions of porosity and clay content using the data acquired in the area of interest. In order to demonstrate the potential application of the proposed model to petrophysical interpretation, we design an inversion procedure, which allows us to estimate porosity, saturation and/or clay content from compressional and shear velocities. Testing of the model on laboratory data and a set of well logs from Carnarvon Basin, Australia, shows good agreement between predictions and measurements. This simple velocity-porosity-clay semi-empirical model could be used for more reliable petrophysical interpretation of compressional and shear velocities obtained from well logs or surface seismic data.  相似文献   

18.
Although there is no assumption of pore geometry in derivation of Gassmann's equation, the pore geometry is in close relation with hygroscopic water content and pore fluid communication between the micropores and the macropores. The hygroscopic water content in common reservoir rocks is small, and its effect on elastic properties is ignored in the Gassmann theory. However, the volume of hygroscopic water can be significant in shaly rocks or rocks made of fine particles; therefore, its effect on the elastic properties may be important. If the pore fluids in microspores cannot reach pressure equilibrium with the macropore system, assumption of the Gassmann theory is violated. Therefore, due to pore structure complexity, there may be a significant part of the pore fluids that do not satisfy the assumption of the Gassmann theory. We recommend that this part of pore fluids be accounted for within the solid rock frame and effective porosity be used in Gassmann's equation for fluid substitution. Integrated study of ultrasonic laboratory measurement data, petrographic data, mercury injection capillary pressure data, and nuclear magnetic resonance T2 data confirms rationality of using effective porosity for Gassmann fluid substitution. The effective porosity for Gassmann's equation should be frequency dependent. Knowing the pore geometry, if an empirical correlation between frequency and the threshold pore‐throat radius or nuclear magnetic resonance T2 could be set up, Gassmann's equation can be applicable to data measured at different frequencies. Without information of the pore geometry, the irreducible water saturation can be used to estimate the effective porosity.  相似文献   

19.
在实验室对5块储层砂岩进行了模拟地层压力条件下的超声波速度测试。砂岩样品采自WXS凹陷的W地层,覆盖了从低到高的孔隙度和渗透率范围。实验选用了卤水和4种不同密度油作为孔隙流体,结合温度变化,实现了对流体粘度引致的速度频散研究。对实验结果的分析表明:(1)对于高孔隙度和渗透率的样品,无论是哪种流体饱和,观察到的超声波速度测试值和零频率Gassmann预测值的差异较小(约2-3%),基本上可以用Biot模型解释;对于中等孔隙度和渗透率的样品,低粘度流体(<约3mP?S)的频散效应也可以用Biot模型得到合理解释;(2)对于低、中孔隙度和渗透率样品,当流体粘度增加时,喷射流机制起主导作用,导致严重的速度频散(可达8%)。对储层砂岩的微裂隙纵横比进行了估计并用于喷射流特征频率的计算,当高于该特征频率时,Gassmann理论的假设条件受到破坏,实验室测得的高频速度不能直接用于地震低频条件下的W地层砂岩的Gassmann流体替换研究。  相似文献   

20.
Hydrocarbon depletion and fluid injection cause compaction and stretching of the reservoir and overburden layers. 4D prestack seismic data can be used to detect these changes because compaction/stretching causes changes in traveltimes and seismic velocities. We show that, by using two different petro‐elastic models at varying effective pressures, a good approximation is to assume that the fractional changes in layer thickness, ΔL/L, and seismic velocity, Δv/v, are related by a linear function of ΔL/L. The slope of this function (the dilation factor, α= (Δv/v)/(ΔL/L) ) is negative and its absolute value generally decreases (shale, low porosity) or increases (sandstone, high porosity) with increasing layer thickness and decreasing effective pressure. The analysis is mainly performed for isotropic deformations. The dilation factor for uniaxial deformations is smaller in absolute value. The dilation factor, which can be calculated from time‐lapse data, can be used to predict reservoir compaction/stretching as a function of depth and surface subsidence.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号