共查询到20条相似文献，搜索用时 15 毫秒
1.
适用于砂土循环加载分析的边界面塑性模型 总被引：1，自引：0，他引：1
基于临界状态土力学框架,建立了一个适用于砂土排水循环加载的边界面塑性模型。采用了考虑虚拟峰值应力比的偏应变硬化准则,初始加载阶段应力点位于边界面上,反向加载阶段以历史最大屈服面作为边界面,同时实现了对密砂软化现象的模拟和对历史所受最大应力的记忆。边界面采用修正的椭圆形,引入考虑密度与应力水平的状态相关剪胀函数,采用非相关联流动法则和以应力反向点作为映射中心的径向映射准则。模型仅有10个参数,通过常规三轴试验即可确定,并且使用一套参数可以模拟不同围压、密度的单调和循环加载情况。分别对饱和砂土的单调、循环排水三轴试验进行模拟,结果表明,该模型能够合理地反映饱和砂土排水条件下的应力-应变特性。 相似文献
2.
天然气水合物赋存在低温高压环境中,会在土颗粒间形成胶结从而增大深海能源土抗剪强度。基于损伤力学理论,将结构性砂土本构模型推广应用于深海能源土分析中,模拟计算了三轴固结排水剪切试验,再根据应力-应变曲线关系定量反演初始屈服系数与水合物饱和度之间的函数关系,并修正了原有的结构性砂土破损规律,建立了深海能源土弹塑性本构模型。另外,根据该模型模拟了另外一组深海能源土三轴剪切试验和等向固结压缩试验。计算结果表明：新建立的深海能源土本构模型可以有效模拟深海能源土剪切强度随水合物饱和度之间的增长关系;随着水合物饱和度的增加,三轴压缩试验中深海能源土峰值强度及割线模量(E50)逐渐增加,等向固结压缩试验中屈服强度增加,与试验结果有较好的一致性,表明了该模型的合理性。 相似文献
3.
For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such a model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. The purpose of these two companion papers was to provide such database collected for a fine sand. The database consists of numerous undrained cyclic triaxial tests with stress or strain cycles applied to samples consolidated isotropically or anisotropically. Monotonic triaxial tests with drained or undrained conditions have also been performed. Furthermore, drained triaxial, oedometric or isotropic compression tests with several un- and reloading cycles are presented. Part I concentrates on the triaxial tests with monotonic loading or stress cycles. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain. 相似文献
4.
Successful numerical simulation of geosynthetic-reinforced earth structures depends on selecting proper constitutive models for soils, geosynthetics and soil–geosynthetic interfaces. Many constitutive models are available for modelling soils and geosynthetics. However, constitutive models for soil–geosynthetic interfaces which can capture most of the important characteristics of interface response are not readily available. In this paper, an elasto-plastic constitutive model based on the disturbed state concept (DSC) for geosynthetic–soil interfaces has been presented. The proposed model is capable of capturing most of the important characteristics of interface response, such as dilation, hardening and softening. The behaviour of interfaces under the direct shear test has been predicted by the model. The present model has been implemented in the finite element procedure in association with the thin-layer element. Five pull-out tests with two different geogrids have been simulated numerically using FEM. For the calibration of the constitutive models used in FEM, the standard laboratory tests used are: (1) triaxial tests for the sand, (2) direct shear tests for the interfaces and (3) axial tension tests for the geogrids. The results of the finite element simulations of pull-out tests agree well with the test data. The proposed model can be used for the stress-deformation study of geosynthetic-reinforced embankments through numerical simulation. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
5.
For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. It is the purpose of these two companion papers to provide such database collected for a fine sand. Part II concentrates on the undrained triaxial tests with strain cycles, where a large range of strain amplitudes has been studied. Furthermore, oedometric and isotropic compression tests as well as drained triaxial tests with un- and reloading cycles are discussed. A combined monotonic and cyclic loading has been also studied in undrained triaxial tests. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain. 相似文献
6.
基于临界状态土力学框架,建立了一个适用于往返循环荷载作用的砂土边界面本构模型。采用无纯弹性域假设,认为受到反向荷载的瞬时土体就产生塑性变形,砂土的弹性区域退化为一个点。屈服面为倒子弹头型,由于砂土孔隙比与压力之间不存在惟一对应的关系,使得屈服面大小无法与体积应变直接耦合,故采用塑性偏应变而不是剑桥模型那种塑性体应变作为硬化参数。流动法则采用加入状态参数的修正的Rowe应力剪胀关系,体现了依赖状态的剪胀思想。屈服面大小的比值 反映了塑性模量的演化,并推导了 的表达式。只用1套参数,该模型就能合理地模拟砂土在不同密度和固结压力下循环荷载的应力-应变关系曲线。 相似文献
7.
人工冻结法是饱水砂层开挖过程中常用的止水和临时支护方法,通过冻土损伤特性研究为冻土力学特性和冻结体稳定性分析奠定基础。为研究冻结砂土的损伤力学特性,在-5℃下进行了不同中主应力系数的冻结砂土三维室内试验。从冻土微元破坏服从Weibull随机分布的特点出发,将Drucker-Prager强度准则作为冻土微元统计分布变量,利用应变等价性假说,建立了三维应力状态下冻结砂土损伤本构模型;在此基础上,讨论模型参数F0与m和中主应力系数的关系,对模型参数进行合理修正,建立中主应力系数影响下的冻结砂土损伤本构模型,并与试验结果进行对比。分析结果表明:参数F0和m随着中主应力系数的增大呈现先减小后增大的趋势;参数F0反映了冻结砂土的强度特性,参数m代表了冻结砂土的延性及脆性特征,考虑中主应力系数影响的冻结砂土损伤本构模型能很好地模拟冻结砂土应力-应变全过程曲线。研究成果为人工冻结法工程设计提供一定的理论依据。移动阅读 相似文献
8.
砂土液化是导致重大地震灾害的主要原因之一。本研究探讨了天然纤维加筋砂土在循环荷载作用下的抗液化性能。在不排水条件下,对具有不同纤维含量的加筋砂土试样进行了一系列循环三轴试验,研究了饱和砂土的液化特性以及循环剪应变幅值、纤维含量对饱和砂土抗液化性能的影响。此外,通过模拟已完成的循环三轴试验,建立了二维有限元数值模型,并对具有不同纤维含量的加筋砂土进行了参数标定。研究结果表明:(1)增加循环剪应变幅值将促进超孔压累积,使得滞回曲线斜率和平均有效应力减小速度加快;(2)纤维的存在能够减缓超孔压的累积,随着纤维含量增加,加筋砂土抗液化能力得到明显提高;(3)标定后的本构模型参数能可靠地用于模拟纤维加筋砂土的液化响应。研究结果为饱和砂土抗液化问题与纤维加筋砂土的数值模拟提供了有价值的参考。 相似文献
9.
A rotational kinematic hardening constitutive model with the capability of predicting the behavior of soil during 3-D stress-reversals has been developed. An existing elasto-plastic constitutive model, the Single Hardening Model, utilizing isotropic hardening serves as the basic framework in these formulations. To this framework is added the capability of handling cross-anisotropic behavior as well as the kinematic hardening mechanism to capture inherent anisotropy of the sand in addition to the large stress-reversals. The model involves thirteen parameters, which can be determined from simple laboratory experiments, such as isotropic compression, drained triaxial compression and triaxial extension tests. The results from a series of true triaxial tests with large stress-reversals performed on loose cross-anisotropic Santa Monica Beach sand are employed for comparison with predictions. 相似文献
10.
11.
通过将Perzyna过应力理论与临界状态理论相结合,并引入Wheeler旋转硬化法则,提出一个能描述土体初始各向异性及应力诱发各向异性的三维弹黏塑性本构模型。模型考虑流变发生的下限,在三维应力空间,模型存在形状相似的静屈服面及动态加载面。采用缩放形式的幂函数。本构模型数值算法采用回映算法,借助ABAQUS软件UMAT子程序接口实现。并通过对三轴不排水蠕变试验的模拟,确定合适的积分步长。此后,分别对三轴不排水蠕变试验及常应变率三轴不排水剪切试验进行了模拟。模拟中通过设置不同参数值,可将模型退化为各向同性模型,并对这两种模拟结果进行了比较。模拟结果表明：(1) 对于三轴不排水蠕变,在低剪应力水平下,各向同性模型和各向异性模型模拟的结果相差不大,而在高剪应力水平下,各向异性模型模拟结果更接近试验结果;(2) 对于常应变率加载试验的模拟,模型合理反映了土体不排水强度随着加载速率的增大而增大现象。 相似文献
12.
Daniela Porcino Vito Nicola Ghionna Raffaella Granata Vincenzo Marcianò 《Geomechanics and Geoengineering》2016,11(2):164-175
The purpose of this paper is to investigate mechanical and hydraulic properties of sands treated with mineral-based grouts through the results of a laboratory test programme consisting of unconfined compression tests (UCS), triaxial bender element tests (BeT) and constant flow permeability tests in triaxial apparatus. An improved apparatus was set up for obtaining high quality, multiple grouted specimens from a single column. Two selected natural sands having different grain sizes were grouted with two mineral-based silica grouts, resulting in different levels of improvement. The behaviour of the sands treated by mineral grouts, in terms of strength, initial stiffness and permeability, was compared with that exhibited by more traditional silicate grouts. The results of this study indicate that sands treated with mineral grouts result in higher strengths, higher initial shear modulus and lower permeability values than the sands treated with the silicate solution. The effect of grout type, effective confining pressure, and sand particle-size on small-strain shear modulus of grouted sand specimens was evaluated. Based on test results, the small strain shear modulus increment from treated to untreated specimens has been correlated with the unconfined compressive strength, obtaining a unique relationship regardless of grout type and grain-size of tested sands. 相似文献
13.
Three-dimensional numerical modelling of the behaviour of a pile subjected to cyclic lateral loading
E. Bourgeois M.H.J. Rakotonindriana A. Le Kouby P. Mestat J.F. Serratrice 《Computers and Geotechnics》2010,37(7-8):999-1007
This paper presents a finite element simulation of the behaviour of a vertical pile subjected to a cyclic lateral loading. First, the choice of a suitable constitutive model is discussed. The analytical solution of the model equations for a monotonic triaxial compression is given, and the model is compared with monotonic and cyclic triaxial tests on dry Fontainebleau sand. Simulations of tests carried out on a model pile with the geotechnical centrifuge of the French Public Works Research Laboratory (LCPC) were then performed with the model parameters derived from the triaxial tests. Results are in good agreement with experiments. 相似文献
14.
The general yield function in the hierarchical approach for constitutive modelling of materials is used with Perzyna's theory to characterize viscoplastic behaviour of geologic materials: a sand and rock salt. Particular attention is given to determination of the constants from laboratory quasistatic or short term, and creep tests. The proposed model is verified with respect to observed laboratory response of the sand and salt. It is implemented in a non-linear finite element procedure and applied to analyse time-dependent behaviour of a cavity in the rock salt. 相似文献
15.
A new finite element program is introduced and its predictive capabilities are compared to results from two long-term, drained laboratory creep tests on a deep sea clay. The constitutive behaviour is based on Cam clay critical state plasticity theory with creep and time-dependent hardening. Creep is computed using either Singh–Mitchell's three-dimensional equation or Taylor's secondary compression relationship. The experimental creep data include a triaxial specimen subjected to two deviatoric stress increments and a one-dimensional consolidation specimen subjected to three vertical stress increments. In addition, the pore pressure behaviour following an increase in stress is examined in the triaxial sample. Predictions compare favourably to test data, which provide confidence for applying the chosen constitutive model and numerical formulation to solve seabed-related problems on the continental slope that are of interest to geologists, the oil industry and the navy, among others. 相似文献
16.
土体是一种颗粒介质,其强度与变形特性具有显著的颗粒尺度效应。采用胞元土体模型和三轴抗剪试验分析了土体强度和变形的尺度效应特性。根据土体中不同尺度颗粒间相互作用表现出的聚集和摩擦效应,提出了“基体-增强颗粒”土体胞元模型,胞元体由基体和增强颗粒组成,其中基体由微小土颗粒集成,而增强颗粒为砂粒,宏观土体则简化为由许多胞元体构成的介质。引入广义球应变和广义等效应变,基于应变能导出了考虑颗粒尺度效应的应力-应变关系以及屈服应力计算公式;同时,针对增强颗粒不同粒径和体分比的土体进行一系列三轴不排水抗剪试验,给出了应力-应变和屈服应力尺度效应的测试结果。试验和理论计算结果均表明,土体强度和变形的尺度效应随增强颗粒的体分比增加以及粒径的减小而增强,由此反映出土体强度和变形显著的尺度效应;土体强度和变形尺度效应的理论预测结果与试验具有较好的一致性。 相似文献
17.
18.
A constitutive model with rotation hardening was generalized from the triaxial compression state to a general stress state. With the generalized model, numerical simulations of cyclic and monotonic undrained triaxial tests were conducted to reproduce the phenomenon of continuous, orderly and rapid changes in anisotropy during liquefaction. The simulated results demonstrated that when sand enters the liquefaction stage, the yield surface in the stress space rotates quickly, causing continuous and rapid changes in anisotropy. Through comparison of the simulated and experimental results, the generalized constitutive model was shown to be able to capture the fundamental behaviors of sand demonstrated by the experimental data, and the rotational hardening rule adopted in the generalized model was proven suitable for describing the continuous, orderly and rapid changes in anisotropy that occur during liquefaction. 相似文献
19.
结构性土固结不排水剪特性的一种描述方法 总被引：2，自引：0，他引：2
针对结构性土的固结不排水剪性状,提出一种基于扰动状态概念的描述方法。通过三轴固结不排水剪试验,分析了结构性土固结不排水剪切过程中的剪应力、孔隙水压力与轴向应变的关系特点。根据扰动状态概念的原理,采用邓肯-张的非线性弹性模型描述相对完整状态的应力-应变关系,用孔隙水压力作为参量定义了一个新的扰动函数,构建了一种描述结构性土固结不排水剪性状的本构关系。经验证,模型计算结果与试验数据吻合较好,可统一描述应变软化型和应变硬化型应力-应变关系。 相似文献
20.
Investigation into MOGA for identifying parameters of a critical-state-based sand model and parameters correlation by factor analysis 总被引：1，自引：1，他引：0
Adding refinement and accuracy to constitutive models of soil results in the introduction of complexities along with more model parameters. These parameters (such as hardening-/softening-, dilatancy-/contractancy-related parameters and critical state parameters) are usually not easily obtained in a straightforward way. How to identify these key parameters and estimate their correlations of advanced soil models is a particular issue for geotechnical engineering. This paper was aimed to investigate multi-objective genetic algorithms for identifying parameters of advanced sand models based on standard laboratory tests, followed by the correlation analysis of parameters. A critical-state-based sand model has been developed to simulate three triaxial compression tests performed on loose and dense Hostun sand. Two widely used genetic algorithms with two initialisation methods are examined. The performance of the two genetic algorithms is assessed by comparing their simulation performance using optimal parameters, the convergence speed and the distribution of solutions on the Pareto front. The optimal parameters can then be classified into two factors by their correlation relationship. 相似文献