共查询到20条相似文献，搜索用时 31 毫秒
1.
本文提出了一种新的特征点法,并在前人的基础上改进了一种数值计算方法(最小二乘法),以此来确定部分具有自然电位异常简单地质体的形态(形态系数)、埋藏深度、极化角和电偶极矩。特征点法通过剖面上三个特殊点(两个极值点和零电位点)的值以及它们相互间的距离便可快速求取地质体各参数。改进的最小二乘法则是在前人的基础上加入了零电位点的计算及其它处理方法,以此来获得准确性更高的地质体各参数。两种方法都被用来计算加入±5%随机误差的理论模型数据,并在土耳其的一个实际野外数据中得到测试。结果表明所求的参数与实际参数具有较好的一致性。 相似文献
2.
Arkoprovo Biswas 《Journal of the Geological Society of India》2016,88(4):493-502
Inversion of self-potential anomaly for 2-D inclined sheets of infinite horizontal extent has been studied. Least-square inversion and very fast simulated annealing global optimization has been used to model the five parameters of self potential anomaly. The method of least square and very fast simulated annealing global optimization method is compared and analyzed. Very fast simulated annealing can model the noisy and field data of self potential anomaly very precisely than linear inversion technique. However, time taken by very fast simulated annealing inversion is larger than linearized inversion. The comparative analysis has been done on synthetic data (noise free and noisy) and two field data from Bavarian woods anomaly, Germany and Surda anomaly, India to show the efficacy of both the methods. The estimated parameters were compared with those from previous studies using various global optimization algorithms, mainly neural network, genetic algorithm and particle swarm optimization on the same field data sets. It can be concluded that the global optimization algorithms considered in this study were able to yield compatible solutions with those from least-square methods. The present global optimization method is in good agreement with the other global optimization methods in terms of results and computation time. 相似文献
3.
A gradient method for interpreting magnetic anomalies due to horizontal circular cylinders,infinite dykes and vertical steps 总被引：2，自引：0，他引：2
I. V. Radhakrishna Murthy C. Visweswara Rao G. Gopala Krishna 《Journal of Earth System Science》1980,89(1):31-42
A new method of interpreting magnetic anomalies of arbitrarily-magnetised horizontal circular cylinders, dipping dykes and
vertical steps is presented. The method makes use of both horizontal and vertical gradients of the magnetic field of the model
under consideration, rather than the observed magnetic anomaly. Vertical and horizontal gradients are calculated from the
observed anomalies, and plotted one against the other to find out the locus of tip of the resultant gradient vector. This
locus is a symmetrical curve for each of the three models mentioned above. The properties of these curves are used to deduce
the various parameters of these models and the direction of magnetisation. 相似文献
4.
Expressions are derived for the horizontal and vertical gradients of the gravity anomaly over a thin dipping sheet of infinite depth extent. The resultant of these two gradients, known as the complex gradient, is also derived and properties of the amplitude and phase responses of the complex gradient are studied. It is shown that the amplitude plot is a symmetric curve whose, shape is independent of the dip (?) of the sheet whereas the phase plot is an antisymmetric curve with an offset value equal to ?-π/2. The depth to top of the sheet is obtained from the amplitude plot. The method is applied on a field example and the results are in good agreement with the results obtained by earlier workers. 相似文献
5.
A comparative study on two interpolator methods for Bouguer anomaly mapping was performed in the El Kef-Ouargha region, Tunisia. In particular, we compare the results of minimum curvature gridding and kriging. We undertake a geostatistical study using both anisotropic and isotropic analysis for studding the spatial variability and kriging the random variable: “Bouguer anomaly”. The model parameters of each method are calculated to compare the results. The anisotropic analysis most closely approximates the measured data. Consequentially, the Bouguer anomaly and vertical gradient maps using anisotropic kriging have the best correlation with the geological map, best represent density distributions at depth and most closely approximate the measured anomaly amplitudes. 相似文献
6.
岩溶塌陷自然电场及其应用 总被引：2，自引：2，他引：0
流经土洞或岩溶塌陷坑中的地下水破坏了土层的固-液界面离子双电层扩散区中正、负电荷的平衡,引起地下介质（土层）自然极化,形成自上而下的自然电场。土洞或岩溶塌陷在平面上产生自然电位似同心圆负心异常、在剖面上引起极小值异常;自然电位梯度在剖面上出现过零点异常,在平面上呈以零值线为对称轴的正负对称的似“蝴蝶状”异常。岩溶区自然电场法干扰因素主要有工业游散电流等人文干扰电磁场、地下金属管道（线） 自然极化电场、上升或下降泉自然电场、山地电场、炭质灰岩自然电场等。针对岩溶区自然电场法干扰因素特点,本文提出采用避让法、排除法、在线监测法进行消除,并将之应用于广西来宾市吉利村岩溶塌陷探测中。结果表明,自然电位剖面曲线在地面沉陷区中心附近出现极小值异常,自然电位梯度剖面曲线也在相同部位显示过零点异常。水文地质监测钻孔在相应的位置上分别揭露了塌陷堆积物、溶洞和断层破碎带,从而验证了上述自然电场法异常的属性。 相似文献
7.
South Purulia Shear Zone in India is an important zone that hosts uranium mineralization. Since detailed geophysical studies have not been carried out in this region, an integrated geophysical study using self-potential, resistivity, very low frequency electromagnetic and radiometric methods was performed to identify the subsurface structures that could host the hydrothermally altered uranium deposits in the area. The study reveals the wide and large magnitude of negative self-potential anomaly across the South Purulia Shear Zone. The peak negative self-potential anomalies are correlated with the low gravity and low resistivity anomalies measured along various profiles. The low self-potential, gravity and low resistivity anomaly zones are also correlated with conducting zones inferred from very low frequency electromagnetic measurements. Interpretation of self-potential data reveals multiple thick sheet-type vertical and/or inclined structures which might be associated with uranium mineralization. Schlumberger resistivity sounding data reveals an increasing trend of apparent resistivity with current electrode separations/depth. Apparent conductance measured simultaneously with resistivity measurement reveals an increase in current flow of current as depth increases. This exhibits the presence of thin conducting layers at these depths, which is not reflected in resistivity sounding data due to suppression problem. Also this conducting layer is consistent in various soundings and is connected from Raghunathpur to the South Purulia Shear Zone. Correlation of very low frequency and self-potential data shows that the structures are comparable and a radiometric profile also advocate that the conducting structure is associated with radioactive minerals. These structures are likely to be mineralized zones as hydro-uranium anomaly has also been reported from various locations in the area. Moreover, drilling results at a specific mine near the study area also confirms the presence of uranium mineralization. The hydrothermal activity associated with uranium mineralization seems to be still active in the area. Such combined geophysical studies are essential to understand this highly complex shear zone for the economic exploitation of its natural resources. 相似文献
8.
Ozkan Kafadar 《Earth Science Informatics》2017,10(4):525-537
CURVGRAV-GUI is an open source software that was developed to interpret gridded gravity data by using curvature technique. It was developed using C# language with Microsoft.NET Framework 4.0. This program calculates the critical and extreme points, and estimates the depths of source bodies at this points. Besides, CURVGRAV-GUI processes gravity data by using minimum curvature, one of the attributes of curvature, and detects the subsurface lineaments. It is a user-friendly application that can display obtained solutions and gravity data thanks to image and scatter maps. CURVGRAV-GUI was designed to develop both synthetic and field applications. Additionally, the β constant, a parameter related to the source geometry, was examined for different source types such as sphere, horizontal and vertical cylinder and thin vertical fault. This program was tested by using two synthetic model applications. In the first synthetic model application, it was used a complex synthetic model consisting of three sphere and a horizontal cylinder located at the different depths. In the second synthetic model application, a graben model consisting of two thin vertical fault was used. Finally, the performance of the CURVGRAV-GUI was tested with using a real gravity data belonging to Kozakli-Central Anatolia region, Turkey. Very successful results were obtained for both synthetic and field data. Earth scientist can use CURVGRAV-GUI for educational experiments. 相似文献
9.
地磁场水平梯度的计算与分析 总被引：4，自引：0，他引：4
In this paper，based on the Gauss theory of geomagnetism and the spherical harmonic mi}del of the geomagnetic field，the horizontal gradients of the geomagnetic field in north一south and west-;east dlrections were calculated in Chinese and"its surrounding regions, the contour maps of the horizontal gradients of the geomagnetic components were constracted，and its regularities of distributions were analysed.
The horizontal gradients of the total intensity (F)，horizontal intensity (H) and vertical intensity (Z ) vary mainly with lat相似文献
The horizontal gradients of the total intensity (F)，horizontal intensity (H) and vertical intensity (Z ) vary mainly with lat
10.
利用实测重力垂直梯度反演长白山地区一剖面的深部构造 总被引：3，自引：0，他引：3
针对重力梯度高分辨率的特点,利用在长白山地区实测的重力垂直梯度数据,采用梯度空间参量图反演其深部构造。台阶模型试验表明: 重力梯度空间参量图能给出构造倾角和倾面的信息,结合重力梯度剖面和梯度空间参量图可以构建出地下构造的几何模型,进而对一些复杂构造进行解释。通过对比实测布格重力异常和实测重力梯度异常,重力梯度比重力异常的分辨率更高; 将梯度法应用到实测重力梯度数据的处理中,结果表明: 该方法对确定密度变化界面的水平位置和深度具有非常好的效果。 相似文献
11.
为更加清晰和准确地利用磁梯度数据获得地质体的分布特征,笔者采用解析信号总水平导数法和梯度欧拉反褶积技术组合实现磁梯度数据的解释,解析信号总水平导数的极值可有效地圈定出矿体的分布范围,梯度欧拉反褶积法可有效地避免背景异常的干扰,从而准确地给出磁性体的位置和深度信息。理论模型证明解析信号水平导数法和梯度欧拉反褶积法的组合可准确地获得磁性体的水平范围和深度。应用于河北迁安地区磁梯度数据的解释,圈定出5个呈条带状分布的较大型铁矿藏,埋深在200~450 m。 相似文献
12.
Hakim Gabtni Badia Chulli Zenatti Chokri Jallouli Kevin L. Mickus Mourad Bedir 《Arabian Journal of Geosciences》2011,4(3-4):507-516
An analysis of Bouguer gravity anomaly data and geothermal gradient data obtained from bottom hole and drill stem tests temperature is used to determine the crustal structure of the Sahel Basin in eastern Tunisia and its role in the maturation and location of the large number of oil and gas fields in the region. The regional Bouguer gravity anomaly field is dominated by gradual increase in values from the northwest to southeast and is may be caused by crustal thinning as revealed by regional seismic studies. In addition, higher geothermal gradients in the same region as the Bouguer gravity anomaly maximum add an additional constraint for the existence of crustal thinning in the region. A detailed analysis of the Bouguer gravity anomaly data was performed by both upward continuation and horizontal gradients. These two techniques were combined to show that the study area consists of two structural regions: (1) the North–South Axis (NOSA)–Zeramedine region which is characterized by northwest-dipping, northeast-striking faults, thicker crust (30–31 km) and low geothermal gradients, and (2) the Mahres–Kerkennah region which is characterized by vertical, northwest-striking faults, thinner crust (28–29 km) and higher geothermal gradients. The correlation of a variety of features includes mapped and geophysically defined faults, volcanic rocks, a thinned crust and high geothermal gradients within the same location as known oil and gas fields indicate that the faults are a major factor in the location of these petroleum accumulations. 相似文献
13.
Mansour A. Al-Garni 《Arabian Journal of Geosciences》2009,2(2):175-184
Magnetic surveys have been used for mineral exploration where different data processing techniques were used to derive the parameters of causative targets. In this respect, the neural network (NN) technique was used to estimate the magnetic causative target parameters. Examples of NN inversion have been tested on synthetic examples where the NN was trained well using forward models of the vertical magnetic effect of a vertical sheet and a horizontal circular cylinder. Specifically, modular neural network (MNN) inversion has been used for the parameter estimation of the causative targets, where the sigmoid function was used as the activation function. The effect of random noise and the error estimation of the horizontal location have been analyzed. When NN is applied to real data, it estimates successfully the parameters of the causative targets such as burial depths, magnetic constants, and angle of polarization. Hilbert transform has been used to locate the source origin, which is important for the NN inversion. This approach has more advantages than the conventional data inversions in terms of its efficiency and flexibility. It also gives fast solutions. The MNN approach has been applied to the Kursk and Manjampalli anomalies, where the results were shown to be in good agreement with the other techniques published in the literature. 相似文献
14.
The self-potential method can be applied to evaluate the degree of water seepage into earth or rockfill dams. Spatial distribution of measured self-potential data can indicate possible anomalous water flow. Phenomena, such as piping, can be modelled as cylindrical bodies. Internal erosion can develop structures, which can be represented by a sphere or point source. Differential settlement in the dam structure occasionally creates horizontal fractures, which require equivalent geometrical body formula. An equation, which allows the calculation of a self-potential profile over a horizontal contact, was developed. This equation can also be applied to the inspection of water flow into horizontal drainage filters. When inverse interpretation returns bodies of relatively small amplitudes, then their probability can be tested statistically. A test, based on cross-correlation between a modelled curve and field data, can be used to evaluate their existence at a given probability level. An acceptance criterion is computed, using the concept of likelihood coefficient. The equation was applied to two case histories. The first is an example of water flow evaluation into a horizontal drainage filter. Several anomalous bodies were interpreted from residual self-potential data, i.e. from the difference between the theoretical response of the filter and the measured self-potential values, then, most of the interpreted bodies were statistically tested. The second case deals with detection and evaluation of a horizontal fissure. The interpreted parameters of the detected body corresponded well to a horizontal fracture found when the water level in the reservoir was lowered. 相似文献
15.
通过位场正则化向下延拓方法,弥补自然电位法对于地下全空间信息反映不足的客观缺陷,改进仅通过地表数据成像而导致的深度不灵敏状况。在模型分析中,新方案的成像结果和真实模型非常吻合。对于实测资料解释,新方案的处理结果在横向上符合实测数据的异常反映,同时还能够准确的给出地下半空间的纵向信息。 相似文献
16.
In the current research, the ground-penetrating radar (GPR) method has been employed to identify physical and geometrical parameters of buried cylindrical structures using the pattern recognition approach. To achieve this goal, the well-established mathematical relationships between geometrical parameters of cylindrical target (radius, burial depth, and horizontal location) and the associated GPR hyperbolic response characteristics are employed using the template matching method. In order to validate the applicability of the template matching method in providing estimates of such parameters, the method is first examined on GPR responses of synthetic models with known geometrical parameters followed by applying on real data using two different similarity criteria including 2-D spatial convolution and normalized cross correlation in the wave number domain. In the first step, the GPR responses of 71 synthetic models encompassing one, two, and three horizontal cylinders were produced using the improved 2-D finite difference in frequency domain. Then, appropriate preprocessing sequences to reduce random noise caused by forward modeling were applied on synthetic data. The proposed algorithm applied on several synthetic model responses could estimate the known geometrical parameters of the buried cylinders with acceptable accuracy (maximum error of 15%). The template matching algorithm was also used to extract geometrical parameters of water and wastewater pipes buried in Imam Hossein Square, Isfahan city, as real GPR data. Depending on environmental conditions and subsurface host formation, the real GPR data normally contain a variety of noises; therefore, a series of appropriate objective preprocessing and processing stages were designed in order to apply on real GPR images before deploying template matching algorithm. The applicability of the template matching algorithm on real data and validity of the estimated parameters were proved based on assessing the accuracy of the estimated geometrical parameters of respective pipes through GPR response versus the measured parameters. The proposed algorithm was designed in such a way that all steps of estimating geometrical parameters of buried cylindrical targets are automatically carried out. 相似文献
17.
The resolution of self-potential anomalies due to closely spaced multiple sheet-like bodies by the potential difference and potential gradient is studied in this paper. Self-potential anomalies due to several synthetic models were inverted through a very fast simulated annealing (VFSA) global optimization. Increase in depth to the top, polarization constant and depth extent of the body decreases resolution at a particular target separation. It has been observed that depth to the top and separation between two targets play an important role in the resolution. Vertical sheets at equal depth can be resolved in the potential difference measurement only if they are separated by at least four times their depth, while they can be resolved in the gradient method, if they are separated by twice the depth. Resolution using potential difference becomes more difficult for dipping sheets, although the potential gradient method can resolve them efficiently. Efficacy of potential gradient data in the inversion is demonstrated in the study using synthetic data as well as field measurement from South Purulia Shear Zone related with uranium investigation. 相似文献
18.
19.
利用合成数据研究并讨论了影响基于射线的跨孔雷达走时层析成像的几个重要因素,包括射线覆盖角度、正则化因子以及测量装置排布等。对比不同射线覆盖角度下层析成像的结果表明,40°~70°为跨孔雷达层析成像的最佳角度。对比不同正则化因子情况下层析成像的结果表明,正则化因子太小或太大,都会导致反演结果与实际模型差别较大,因此选择合适的正则化因子对反演成像极其重要。通过研究水平和不同倾斜异常体的层析成像结果以及波场快照发现,由于发射和接收装置通常放置在2个平行的钻孔中,使得射线主要在近水平方向上传播,因此横向异常体的反演效果好,而纵向或高角度异常体的反演效果不佳,且反演出的异常范围要比实际尺度大。 相似文献