共查询到20条相似文献，搜索用时 31 毫秒
1.
By using the air pluviation technique, it is aimed to achieve the desired relative density with uniform void ratio throughout the specimen in order to maintain the homogeneity and to avoid the spatial variability. Further, in order to achieve the maximum deposition intensity, a systematic optimization study has been carried out rigorously in a test tank to determine the diameter of the orifice to be employed for the sieve plates of different porosity and the number of sieve plates to be installed in the diffuser sieve sets. The study has been conducted with four different patterns of sieves with different porosity to achieve a wide range of relative densities for four different uniformly graded Indian sands. The dynamic penetrometer which is considered to be one of the cost effective instruments has been efficiently used to determine the soil resistance at various locations of the test tank for every given height of fall in order to check the uniformity of placement density throughout the sand bed. The study reveals that the sand beds of different relative densities could be achieved using different patterns of diffuser sieves at optimum sand flow rate without compromising the uniformity. The effect of height of fall as well as porosity of diffuser sieves on the relative density of different sands has been studied in detail. The deposition intensity and the relative density obtained from the present study are compared with the values available in the literature. 相似文献
2.
Image analysis of aggregates does not measure the same size as sieve analysis. The size of aggregates, determined by sieve analysis, is presented with respect to the percent cumulative mass, whereas image analysis does not measure mass. Results are often presented in percent particles or percent area. Several researchers have claimed that more accurate volume and mass determinations are necessary for accurate construction of grain-size curves. In the present work, several methods for reconstructing volume and thus mass of aggregates from image analysis (IA) have been tested to see how they influence the grain-size distribution curves. The actual mass of the individual particles was found to have little or no influence on the grain-size distribution curve, which is normalized and thus insensitive to mass. Accurate conversion of image-analysis size to sieve size is dependent upon how particles pass through sieves. Most existing methods base their conversion of image-analysis size to sieve size on the intermediate axis, multiplied by some factor. The present work shows that there is no direct correlation between the intermediate axes and sieve size. A universal conversion of image-analysis size to sieve size has been developed, using the minimum-bounding square around the minimum projected area. This measure yields very good correlation with sieve-analysis results. 相似文献
3.
LU Anhuai HUANG Shanshan LIU Rui ZHAO Dongjun QIN Shan 《《地质学报》英文版》2006,80(2):161-169
The micro-channels usually refers to structural channels of minerals with aperture in the range of 0.3 nm to 2.0 nm. Such microchannels include, Mn-O octahedron channel filled by K in cryptomelane, and channel constructed by Si-O and AI-O tetragonal molecular sieve filled by Na and Ca in zeolite, and effectively have the function of molecular sieve. Here we point out that ultramicrochannels of natural minerals have apertures below 0.3 nm with the features of ionic sieves. The ultra-microchannels of mineral feldspar, accounting for half mass of the Earth＇s crust, have been largely ignored because the aperture is too small. In this work, we present that feldspar displays a certain degree of ion exchange and owns a feature of channel structure under both high and low temperatures. At high temperature, Na^＋ can enter the channels of feldspars. The content of Na2O in feldspar increases up to 15.9%. At middle temperature, Pb^2＋ can also enter the channels of feldspar as the result of ion exchange, leading thus to the formation of Pb-feldspar. At room temperature, about 97.94% Cd^2＋ can be removed and Cd-feldspar can be obtained. These phenomena indicate typical effects of ultra-microchannels of feldspar, which may be suggested as a potential for the treatment of heavy metal pollution and nuclear waste. The ultra-microchannels of natural minerals have played special role in migration and exchange of geomaterials. The molecular sieves of microchannels of a few natural minerals have the property of purifying molecular gas pollution. And the ionic sieves of ultramicrochannels of most natural minerals can purify ionic water contaminates. 相似文献
4.
考虑初始面非水平条件,建立河流边界控制下的半无限含水层渗流模型,提出非水平初始面及其相关参数（a、tN）的简易计算方法,并探讨模型的适用条件。分析表明,该法适用于观测数据较少、地下水水位变幅相对于潜水含水层厚度较小、且观测孔距河岸较近条件下河流附近潜水含水层渗流计算。结合实例,采用查表法和配线法求解模型。计算结果表明:参数a和tN的计算值不同,水位计算误差在0.02 m以内,较原公式精度有明显提高。新模型为初始面非水平条件下的潜水渗流计算提供一种简易方法。 相似文献
5.
筛法／激光粒度仪法接序测定全样泥沙粒度是泥沙粒度分析的基本方法,分级交混现象会时有出现,需要研究全样级配的调整处理。本文从先用筛分法分析全样泥沙到分界粒级,再将分界粒级以下(筛下)泥沙做全样用激光粒度分析仪法分析的作业程序,按激光粒度分析仪法小于分界粒级D_(FJ)的泥沙的质量／体积比例等于1(100％)和小于1(100％)两种可能,提出了相应的粒度分析级配序列计算调整方法和全样级配序列的接序方法。分析了以“筛法分界粒级级配为准”和“以激光粒度分析仪法最大粒级级配为准”的不足。认为激光粒度分析仪法向上粒级的分界交混质量较小,应用本文“激光粒度分析仪法分析小于分界粒级D_(FJ)的泥沙的质量／体积比例小于1(100％)”的方法和公式,调整处理分级交混问题比较合理。 相似文献
6.
In this paper, a single-region boundary element method (BEM) is presented for the analysis of transversely isotropic bi-material halfspaces with arbitrarily inclined planes of isotropy and material interfaces. The proposed BEM uses the fundamental solution of a transversely isotropic bi-material fullspace and five boundary element techniques. Infinite boundary elements are introduced to consider the far-fields of a transversely isotropic bi-material halfspace. The effective integration methods are proposed for dealing with various integrals in the discretized boundary integral equation. The stresses at internal points are obtained using the coordinate transformation of kernel functions, and the stresses on the boundary surface are calculated using an improved traction recovered method. Numerical verifications of displacements and stresses for a benchmark problem are conducted, and excellent agreement with previously published results is obtained. Numerical examples are presented to illustrate the influence of non-horizontal or horizontal planes of isotropy in bi-material halfspaces on the displacements and stresses induced by the tractions on the horizontal boundary surface. Results reveal that the elastic fields vary clearly with the dip angle of the isotropic plane and the stresses across the bi-material interface are closely related to the ratios of the elastic parameters of the bi-material. 相似文献
7.
Mostafa Badroddin Ezzeddin Bakhtavar Hasan Khoshrou Bahram Rezaei 《Arabian Journal of Geosciences》2013,6(9):3319-3329
The paper proposes a standardized image-processing procedure with the use of sieve analysis results for calibration which is utilized to measure the size distribution of fragmentation at Sungun mine. Through this procedure, a number of 19 bench blasting in various levels have been initially selected as the target of the study for each, multiple photos were taken immediately after blast from suitable perspectives and locations of the muckpiles surfaces. The number of image sampling was chosen adequately high to achieve further reliability of the whole photography procedure. Then fragments of each muckpile were separately mixed by a loader, where another image sampling from these new muckpiles, bucket of loaders, and haulage trucks was performed. For the purpose of sieve analysis, seven sieves with the mesh sizes between 1.27 cm (0.5 in) and 25.4 cm (10 in) were designed, manufactured, and then installed at Sungun semi-industrial laboratory. Additionally, three mass samples of the mixed fragments were randomly chosen among the 19 muckpiles for sieving. During image analysis stage, “sieve shift” and “mass power” factors, required to obtain standardized size distribution, were precisely assigned when the results obtained by the image analysis software was in accordance with the sieving results. In order to validate the reliability of the image processing, a comparative analysis of the achieved results was made with the results of the original Kuz–Ram model [Cunningham (1983) The Kuz–Ram model for prediction of fragmentation from blasting. In: Proceedings of the first international symposium on rock fragmentation by blasting, Lulea, Sweden, pp 439–454]. Finally, the image-processing procedure was found to be more efficient, with results close-matched to the real results of the sieve analysis. 相似文献
8.
M. Felix 《Sedimentology》2002,49(3):397-419
A two‐dimensional numerical model is used to describe the flow structure of turbidity currents in a vertical plane. To test the accuracy of the model, it is applied to historical flows in Bute Inlet and the Grand Banks flow. The two‐dimensional spatial and temporal distributions of velocity and sediment concentration and non‐dimensionalized vertical profiles of velocity, turbulent kinetic energy and sediment concentration are discussed for several simple computational currents. The flows show a clear interaction between velocity, turbulence and sediment distribution. The results of the numerical tests show that flows with fine‐grained sediment have low vertical and high horizontal gradients of velocity and sediment concentration, show little increase in flow thickness and decelerate slowly. Steadiness and uniformity in these flows are comparable for velocity and concentration. In contrast, flows with coarse‐grained sediment have high vertical and low horizontal velocity gradients and high horizontal concentration gradients. These flows grow considerably in thickness and decelerate rapidly. Steadiness and uniformity in flows with coarse‐grained sediment are different for velocity and concentration. The results show the influence of spatial and temporal flow structure on flow duration and sediment transport. 相似文献
9.
The darter goby, Gobionellus boleosoma, sieves meiofaunal organisms from ingested sediment bites. Gut contents of darter gobies were compared with available food items as determined from core analysis. Copepods (the most numerous item in guts), and ostracods were significantly selected for by the gobies. Nematodes occurred in the same relative numbers in guts as in cores. Foraminifera (the most numerous item in cores) were significantly selected against. 相似文献
10.
Deserts are one of the most important dust sources in the world. Because dust content changes as a function of height at low levels in the atmosphere, this affects long‐term dust transport. In this paper, field data measured above shifting sands in the south‐eastern Tengger Desert were used to analyse the vertical distribution of sediment fluxes in the near‐surface layer (0 to 48 m). It was possible to express horizontal sediment flux as a power function, but aeolian deposition as a function of height could be expressed as an exponential function. There are two curve types for the particle size distributions in the horizontal sediment flux and aeolian deposition: bimodal and unimodal curves. For the horizontal sediment flux and aeolian deposition, heights of 24 m and 32 m, respectively, were the key heights in the size distribution curve; below these heights, the curve was bimodal, whereas above these heights, it was unimodal. At heights of 4 to 16 m, and especially between 8 m and 12 m, the data were particularly interesting because the sediment size, transport mode, degree of sorting, and the skewness and kurtosis change. For the horizontal sediment flux, wind turbulence moved saltating particles higher than expected. 相似文献
11.
Estimating the settling velocity of bioclastic sediment using common grain‐size analysis techniques 
下载免费PDF全文
下载免费PDF全文 Michael V. W. Cuttler Ryan J. Lowe James L. Falter Daniel Buscombe 《Sedimentology》2017,64(4):987-1004
Most techniques for estimating settling velocities of natural particles have been developed for siliciclastic sediments. Therefore, to understand how these techniques apply to bioclastic environments, measured settling velocities of bioclastic sedimentary deposits sampled from a nearshore fringing reef in Western Australia were compared with settling velocities calculated using results from several common grain‐size analysis techniques (sieve, laser diffraction and image analysis) and established models. The effects of sediment density and shape were also examined using a range of density values and three different models of settling velocity. Sediment density was found to have a significant effect on calculated settling velocity, causing a range in normalized root‐mean‐square error of up to 28%, depending upon settling velocity model and grain‐size method. Accounting for particle shape reduced errors in predicted settling velocity by 3% to 6% and removed any velocity‐dependent bias, which is particularly important for the fastest settling fractions. When shape was accounted for and measured density was used, normalized root‐mean‐square errors were 4%, 10% and 18% for laser diffraction, sieve and image analysis, respectively. The results of this study show that established models of settling velocity that account for particle shape can be used to estimate settling velocity of irregularly shaped, sand‐sized bioclastic sediments from sieve, laser diffraction, or image analysis‐derived measures of grain size with a limited amount of error. Collectively, these findings will allow for grain‐size data measured with different methods to be accurately converted to settling velocity for comparison. This will facilitate greater understanding of the hydraulic properties of bioclastic sediment which can help to increase our general knowledge of sediment dynamics in these environments. 相似文献
12.
Modeling Sediment Suspensions in an Idealized Tidal Embayment: Importance of Tidal Asymmetry and Settling Lag 总被引：1，自引：0，他引：1
Suspended sediment transport processes in a short tidal embayment with a simple geometry are investigated using analytic and
numerical models. On the basis of numerical results, the horizontal gradient of depth-averaged suspended sediment concentration
can be parameterized with a combination of the first harmonic and mean. Using the parameterization, the solution of the analytic
model is obtained. Evaluation of the major terms from the solution of the analytic model shows that a quarter-diurnal frequency
is significant near the mouth while a semidiurnal component dominates the interior area. The settling lag consists of local
and nonlocal components. The local phase lag is a function of the ratio between tidal period and settling time. The nonlocal
phase lag is determined by the phase difference between tidal velocity and the horizontal gradient of sediment concentration
and by the strength of erosion and horizontal advection. 相似文献
13.
黔北西部及邻区晚三叠世末期-中侏罗世,为印支运动导致的海相沉积历史结束后开始的一段陆相沉积时期。其沉积特点是湖泊沉积占主导,河流沉积次之。在纵向上表现为河流沉积出现在该时期地层序列的下部二桥组和上部下沙溪庙组和上沙溪庙组中;湖泊沉积则贯穿整个研究时期的地层中,特别是地层序列中部自流井组中发育良好。河流沉积具二元结构,下部为边滩沉积,上部为堤岸沉积。湖泊沉积分为滨湖、浅湖和深湖三个亚相沉积,在地层序列上显示出两个由浅至深的旋回变化特点。研究时期的地层具有旋回性特点,以不整合面及相应的整合面作为层序界面,可分为5个沉积层序,每个层序由水进体系域和水退体系域组成,粗略地反映了湖平面的5次进退变化。 相似文献
14.
The benthic foraminifer Quinqueloculina impressa Reuss, was buried in various types of sediment in order to assess its capability for producing sediment disturbances and thus, ichnofossils. Silts and silty-clays showed distinct burrows; fine sands did not. Two types of burrows were produced: fairly straight, vertical burrows from 4 cm below the water-sediment interface to within 1 cm of the sediment surface, and a horizontal and vertical maze-like burrow system in the top centimetre of the sediment. Individuals moving on the sediment surface also produced visible trails. When the sediments were dried the burrows were always destroyed; in some cases the surface trails were preserved. We propose that the vertical burrows are escape structures and that the horizontal and vertical maze-like structures are living burrows. Ichnofossils similar to the escape structures and surface structures have been described. Presence of these ichnofossils indicates a low energy sedimentary environment and a lack of macrofaunal bioturbation. The presence of escape structures may indicate a pulsatory pattern of sedimentation. 相似文献
15.
黄土高原西部风成沉积的研究,是近年古气候研究的重要问题之一,但对新生代风成沉积底界的认识仍存在争议。渐新世晚期发育于兰州地区的咸水河组的岩性特征与黄土高原的风尘沉积有相似的特征,对其进行系统的沉积相和沉积环境研究对认识黄土高原西部早期风尘沉积有重要意义。本研究对兰州以北厚约916m的凤凰山剖面进行了岩石磁学、粒度、成份分析和电镜等多种分析,初步结果表明,咸水河组大部分黏土没有水平层理,其粒度概率分布曲线、概率累积曲线、组成特征和磁化率、元素含量及扫描电镜与典型黄土、古土壤和红黏土非常相似,为风成沉积,是目前发现的兰州地区新生代最老的风成沉积。这套黏土的色调和磁化率等环境代用指标与黄土高原的第四纪黄土接近,指示了第三纪早期一个低温干旱的地质环境。咸水河组中出现的砂砾石层,以颗粒大、分选差、一般无水平层理或层理不明显为特征,其粒度概率曲线、累积概率曲线与典型河流沉积物非常相似,是河流沉积物,指示了多期河流发育,可能与青藏高原的隆升有关。 相似文献
16.
介绍了潮间带地区,海潮引起海水位变动时,一种原位测定海底沉积物渗透系数的新方法.该方法不仅可以测定海底沉积物水平和垂向的渗透系数,还可对海底沉积物中任意倾斜方向的渗透系数给予测定,这一点是传统测定沉积物渗透系数的方法所无法达到的.通过所测数据,我们可以画出表征含水层渗透系数的椭圆,从而确定海底沉积物各相异性的性质,这一结果对于研究地下水流动、河水泄流及海底沉积物中污染物的运移意义十分重大.该方法能有效的用于不同海洋地质情况,并且相比颗粒分析、渗透仪、和抽水试验等其他方法更经济,更实用. 相似文献
17.
18.
The River Bush must reach a standard of good ecological potential (GEP) by 2015 due to the requirements of the water framework directive. The role of sediments within a water body is extremely important to all aspects of a river’s regime. The aim of this research is to investigate the effects of Altnahinch Dam on sediment distribution in the River Bush (a heavily modified water body) with comparison made against the Glendun River (an unmodified water body). Samples collected from the rivers were analysed by physical (pebble count, sieve analysis) and statistical methods (ANOVA, GRADISTAT). An increase in fine sediments upstream of the dam provides evidence that the dam is impacting sediment distribution. Downstream effects are not shown to be significant. The output of this study also implies similar impacts at other drinking water storage impoundments. This research recommends that a sediment management plan be put in place for Altnahinch Dam and that further studies be carried-out concentrating on fine sediment distribution upstream of the dam. 相似文献
19.
A new, instantaneous aeolian sand trap design for field use 总被引：4，自引：0，他引：4
D. W. T. JACKSON 《Sedimentology》1996,43(5):791-796
A new aeolian sediment trap is described which can give up to 1 Hz measurement frequency in field conditions. The trap adopts a circular, horizontal trap design with a load cell connection to give continuous, unobtrusive trap measurement of sediment flux. Simultaneous velocity recording is carried out using an anemometer. Trap construction costs are approximately £200. Initial results in field conditions using a direct comparison of wind velocity data, sampled at an equivalent frequency, have given a first-order relationship between sediment flux and velocity. The trap enables simultaneous sampling of wind velocity and sediment flux at a sufficiently short interval to enable investigation of sediment transport dynamics under a variety of field conditions. 相似文献