共查询到20条相似文献，搜索用时 140 毫秒
1.
Although for many years it was thought that amplitude scaling of acceleration time series to reach a target intensity did not introduce any bias in the results of nonlinear response history analyses, recent studies have showed that scaling can lead to an overestimation of deformation demands with increasing scale factors. Some studies have suggested that the bias can be explained by differences in spectral shape between the response spectra of unscaled and scaled records. On the basis of these studies, some record selection procedures assume that if records are selected using spectral-shape-matching procedures, amplitude scaling does not induce any bias on the structural response. This study evaluates if bias is introduced on lateral displacement demands and seismic collapse risk estimates even when spectral shape is carefully taken into consideration when selecting ground motions. Several single-degree-of-freedom and multiple-degree-of-freedom systems are analyzed when subjected to unscaled and scaled ground motions selected to approximately match the mean and the variance of the conditional spectrum at the target level of intensity. Results show that an explicit consideration of spectral shape is not enough to avoid a systematic overestimation of lateral displacement demands and collapse probabilities as the scale factor increases. Moreover, the bias is observed in practically all cases for systems with strength degradation and it increases with decreasing period and decreasing lateral strength relative to the strength required to remain elastic. Key reasons behind the bias are presented by evaluating input energy, causal parameters, and damaging pulse distributions in unscaled and scaled ground motion sets. 相似文献
2.
In damage‐based seismic design it is desirable to account for the ability of aftershocks to cause further damage to an already damaged structure due to the main shock. Availability of recorded or simulated aftershock accelerograms is a critical component in the non‐linear time‐history analyses required for this purpose, and simulation of realistic accelerograms is therefore going to be the need of the profession for a long time to come. This paper attempts wavelet‐based simulation of aftershock accelerograms for two scenarios. In the first scenario, recorded main shock and aftershock accelerograms are available along with the pseudo‐spectral acceleration (PSA) spectrum of the anticipated main shock motion, and an accelerogram has been simulated for the anticipated aftershock motion such that it incorporates temporal features of the recorded aftershock accelerogram. In the second scenario, a recorded main shock accelerogram is available along with the PSA spectrum of the anticipated main shock motion and PSA spectrum and strong motion duration of the anticipated aftershock motion. Here, the accelerogram for the anticipated aftershock motion has been simulated assuming that temporal features of the main shock accelerogram are replicated in the aftershock accelerograms at the same site. The proposed algorithms have been illustrated with the help of the main shock and aftershock accelerograms recorded for the 1999 Chi–Chi earthquake. It has been shown that the proposed algorithm for the second scenario leads to useful results even when the main shock and aftershock accelerograms do not share the same temporal features, as long as strong motion duration of the anticipated aftershock motion is properly estimated. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
3.
4.
A broader consensus on the number of ground motions to be used and the method of scaling to be adopted for nonlinear response history analysis (RHA) of structures is yet to be reached. Therefore, in this study, the effects of selection and scaling of ground motions on the response of seismically isolated structures, which are routinely designed using nonlinear RHA, are investigated. For this purpose, isolation systems with a range of properties subjected to bidirectional excitation are considered. Benchmark response of the isolation systems is established using large sets of unscaled ground motions systematically categorized into pulse-like, non-pulse-like, and mixed set of motions. Different subsets of seven to 14 ground motions are selected from these large sets using (a) random selection and (b) selection based on the best match of the shape of the response spectrum of ground motions to the target spectrum. Consequences of weighted scaling (also commonly referred to as amplitude scaling or linear scaling) as well as spectral matching are investigated. The ground motion selection and scaling procedures are evaluated from the viewpoint of their accuracy, efficiency, and consistency in predicting the benchmark response. It is confirmed that seven time histories are sufficient for a reliable prediction of isolation system displacement demands, for all ground motion subsets, selection and scaling procedures, and isolation systems considered. If ground motions are selected based on their best match to the shape of the target response spectrum (which should be preferred over randomly selected motions), weighted scaling should be used if pulse-like motions are considered, either of weighted scaling or spectral matching can be used if non-pulse-like motions are considered, and an average of responses from weighted-scaled and spectrum-matched ground motions should be used for a mixed set of motions. On the other hand, the importance of randomly selected motions in representing inherent variability of response is recognized and it is found that weighted scaling is more appropriate for such motions. 相似文献
5.
Mathieu Causse Aurore Laurendeau Matthieu Perrault John Douglas Luis Fabian Bonilla Philippe Guéguen 《Bulletin of Earthquake Engineering》2014,12(2):755-768
Nonlinear dynamic analysis of existing or planned structures often requires the use of accelerograms that match a target design spectrum. Here, our main concern is to generate a set of motions with a good level of fit to the Eurocode 8 design spectra for France. Synthetic time series are generated by means of a non-stationary stochastic method. To calibrate the input parameters in the stochastic approach, we select a reference set of accelerograms for a Eurocode 8 type B site category from the PEER Ground-Motion Database, which are then adjusted to the target spectrum through wavelet addition. Then, we compute nonlinear seismic responses of a soil column, including pore pressure effects, and brittle and ductile structures to the stochastic time-series, the natural accelerograms and time-series generated using stationary stochastic approaches. The results of these calculations reveal considerable variability in response despite the similarities in terms of spectral acceleration. 相似文献
6.
Energy‐compatible and spectrum‐compatible (ECSC) ground motion simulation using wavelet packets 
下载免费PDF全文
下载免费PDF全文 A stochastic ground‐motion simulation and modification technique is developed to generate energy‐compatible and spectrum‐compatible (ECSC) synthetic motions through wavelet packet characterization and modification in both frequency and time domains. The ECSC method significantly advances traditional spectral matching approaches, because it generates ground motions that not only match the target spectral accelerations, but also match Arias intensity build‐up and significant durations. The great similarity between the ECSC simulated motions and the actual recorded motions is demonstrated through one‐to‐one comparison of a variety of intensity measures. Extensive numerical simulations were also performed to validate the performance of the ECSC ground motions through nonlinear analyses of elasto‐plastic oscillators. The ECSC method can be easily implemented in the generalized conditional intensity measure framework by directly simulating a set of motions following a targeted distribution of multiple intensity measures. Therefore, the ECSC method has great potential to be used in performance‐based earthquake design and analysis. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
7.
Bruce A. Bolt 《Pure and Applied Geophysics》1986,124(4-5):919-930
There remains much uncertainty on the absolute elastic wave energy released by fault rupture. Few direct estimates of the partition of seismic wave energy in ground shaking have been made. In this work, ground particle velocities from integrated accelerograms are used to compute the kinetic energy crossing unit area per unit time. Simplified theory for the near-field strong-motion case would appear to give a valid lower energy bound; the wave attenuation does not present a major problem. The partition of energy in predominantly P, S, and surface wave portions, for given frequency windows, is tabulated using strong-motion accelerograms recorded at different azimuths to the fault-sources of six California earthquakes (5.5<M
L<7.2). Checks against earlier magnitudeM
L and momentM
0 correlations indicate significantly higher overall wave energy outputs than expected, but further calibration is needed.The study demonstrates that stable estimates of frequency-dependent seismic wave energies in the nearfield can be obtained from strong-motion records. Hence, energy flux may have a wider application to risk mapping than previously thought. In particular, a shift from peak acceleration scaling to (kinetic) energy inputs for engineering design appears to involve only routine processing. 相似文献
8.
Optimal design of tuned mass dampers for a multi‐storey cross laminated timber building against seismic loads 下载免费PDF全文
下载免费PDF全文 In this paper, the effectiveness of different design solutions for tuned mass dampers (TMD) applied to high‐rise cross‐laminated (X‐Lam) timber buildings as a means to reduce the seismic accelerations was investigated. A seven‐storey full‐scale structure previously tested on shaking table was used as a reference. The optimal design parameters of the TMDs, i.e. damping and frequency ratios, were determined by using a genetic algorithm on a simplified model of the reference structure, composed by seven masses each representing one storey. The optimal solutions for the TMDs were then applied to a detailed finite element model of the seven‐storey building, where the timber panels were modelled with shell elements and the steel connectors with linear spring. By comparing the numerical results of the building with and without multiple TMDs, the improvement in seismic response was assessed. Dynamic time‐history analyses were carried out for a set of seven natural records, selected in accordance with Eurocode 8, on the simplified model, and for Kobe earthquake ground motion on the detailed model. Results in terms of acceleration reduction for different TMD configurations show that the behaviour of the seven‐storey timber building can be significantly improved, especially at the upper storeys. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
9.
K. K. Wijesundara R. Nascimbene T. J. Sullivan 《Bulletin of Earthquake Engineering》2011,9(5):1535-1558
The direct displacement based seismic design procedure utilises equivalent viscous damping expressions to represent the effect
of energy dissipation of a structural system. Various expressions for the equivalent viscous damping of different structural
systems are available in the literature, but the structural systems examined in the past have not included concentrically
braced frame structures. Thus, this study describes the development of an equivalent viscous damping equation for concentrically
braced frame structures based on the hysteretic response of 15 different single storey models. Initially, equivalent viscous
damping is calculated based on the area based approach and then corrected for the earthquake excitation. An iterative procedure
is adopted to calibrate the equivalent viscous damping expression to the results of inelastic time history analyses using
a number of spectrum-compatible real accelerograms. From the results of this research, a new damping expression is developed
as a function of the ductility and the non dimensional slenderness ratio. 相似文献
10.
Empirical equations are presented for the prediction of displacement response ordinates for damping ratios of 2, 5, 10, 20 and 30% of critical and for response periods up to 4s, using 532 accelerograms from the strong‐motion databank from Europe and the Middle East. The records were all re‐processed and only employed for regressions at periods within the usable range, defined as a fraction of the filter cut‐off and depending on the instrument type (digital or analogue), earthquake magnitude and site class. The equations can be applied to predict the geometric mean displacement and pseudo‐acceleration spectra for earthquakes with moment magnitudes ( M ) between 5 and 7.6, and for distances up to 100km. The equations also include style‐of‐faulting and site class as explanatory variables. The predictions obtained from these new equations suggest that earlier European equations for spectral displacements underestimate the ordinates at longer periods as a result of severe filtering and the use of the spectral ordinates at periods too close to the filter cut‐off. The results also confirm that the period defining the start of the constant displacement plateau in the Eurocode 8 (EC8) spectrum is excessively short at 2s. The results not only show that the scaling factor defined in EC8 for estimating the spectral ordinates at damping ratios different from 5% of critical are a good general approximation, but also that this scaling varies with magnitude and distance (reflecting the influence of duration) and also displays a mild dependence on response period. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
11.
Equivalent viscous damping for displacement-based seismic design of hysteretic damped braces for retrofitting framed buildings 总被引：2，自引：2，他引：0
A displacement-based design (DBD) procedure aiming to proportion hysteretic damped braces (HYDBs) in order to attain, for a specific level of seismic intensity, a designated performance level of a structure is proposed for the retrofitting of framed buildings. A key step for the reliability of the DBD procedure is the selection of the equivalent viscous damping in order to account for the energy dissipated by the damped braced frame. In this paper, expressions of the equivalent damping are obtained considering the energy dissipated by the HYDBs and the framed structure. To this end, dynamic analyses of an equivalent single degree of freedom system, whose response is idealized by a trilinear model, are carried out considering real accelerograms matching, on the average, Eurocode 8 (EC8) response spectrum for a medium subsoil class. Then, a three-storey reinforced concrete (r.c.) framed structure of a school building, designed in a medium-risk seismic region according to the Italian code in force in 1975, is supposed as retrofitted as if in a high-risk seismic region of the current seismic code (NTC08) by the insertion of HYDBs. Nonlinear static analyses are carried out to evaluate the vulnerability of the primary structure, characterized by the lack of interior girders along the floor slab direction, and to select optimal properties of the HYDBs. The effectiveness of the retrofitting solutions is checked referring to nonlinear dynamic analyses, considering artificially generated accelerograms whose response spectra match those adopted by NTC08 for the earthquake design levels corresponding to the serviceability and ultimate limit states. 相似文献
12.
A new method of stiffness‐damping simultaneous identification of building structures is proposed using limited earthquake records. It is shown that when horizontal accelerations are recorded at the floors just above and below a specific storey in a shear building model, the storey stiffness and the damping ratio can be identified uniquely. The viscous damping coefficient and the linear hysteretic damping ratio can also be identified simultaneously in a numerical model structure. The accuracy of the present identification method is investigated through the actual limited earthquake records in a base‐isolated building. It is further shown that an advanced identification technique for mechanical properties of a Maxwell‐type model can be developed by combining the present method with a perturbation technique. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
13.
A methodology for the optimal design of supplemental viscous dampers for framed structures is presented. It addresses the problem of minimizing the added damping subject to a constraint on the maximal interstorey angular drift for an ensemble of realistic ground motion records while assuming linear behaviour of the damped structure. The solution is achieved by actually solving an equivalent optimization problem of minimizing the added damping subject to a constraint on a maximal weighted integral on the squared angular drift. The computational effort is appreciably reduced by first using one ‘active’ ground motion record. If the resulting optimal design fails to satisfy the constraints for other ground motions from the original ensemble, additional ground motions (loading conditions) are added one by one to the ‘active’ set until the optimum is reached. An efficient selecting process which is presented herein will usually require one or two records to attain an optimum design. Examples of optimal designs of supplemental dampers are presented for a 2‐storey shear frame and a 10‐storey industrial frame. The 2‐storey shear frame is required to withstand one given ground motion whereas the 10‐storey frame is required to withstand an ensemble of twenty ground motions. The resulting viscously damped structures have envelope values of interstorey drifts equal or less than the target drifts. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
14.
Esra Mete Güneyisi 《地震工程与结构动力学》2012,41(5):853-874
The present paper investigates the seismic reliability of the application of buckling restrained braces (BRBs) for seismic retrofitting of steel moment resisting framed buildings through fragility analysis. Samples of regular three‐storey and eight‐storey steel moment resisting frames were designed with lateral stiffness insufficient to comply with the code drift limitations imposed for steel moment resisting frame systems in earthquake‐prone regions. The frames were then retrofitted with concentrically chevron conventional braces and BRBs. To obtain robust estimators of the seismic reliability, a database including a wide range of natural earthquake ground motion records with markedly different characteristics was used in the fragility analysis. Nonlinear time history analyses were utilized to analyze the structures subjected to these earthquake records. The improvement of seismic reliability achieved through the use of conventional braces and BRBs was evaluated by comparing the fragility curves of the three‐storey and eight‐storey model frames before and after retrofits, considering the probabilities of four distinct damage states. Moreover, the feasibility of mitigating the seismic response of moment resisting steel structures by using conventional braces and BRBs was determined through seismic risk analysis. The results obtained indicate that both conventional braces and especially BRBs improve significantly the seismic behavior of the original building by increasing the median values of the structural fragility curves and reducing the probabilities of exceedance of each damage state. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
Earthquake-resistant design and seismic analysis often require the earthquake action to be represented in the form of acceleration time-histories. Real accelerograms can be selected based on matching an earthquake scenario, defined by magnitude and distance, and scaled if necessary. The scaled accelerograms should reflect the hazard in terms of the parameters that characterise the inelastic demand on structures, including response spectral ordinates, duration and energy content. In order to maintain realistic ground motions, the scaling factors should not differ greatly from unity. It is found that in many cases, where the hazard is influenced by more than one seismic source, it is impossible to define a single earthquake scenario that is compatible with the results of probabilistic seismic hazard assessment. Even if a hazard-consistent scenario can be defined, there are difficulties encountered in using the results to select and scale real accelerograms. 相似文献
16.
基于美国西部80条基岩上的近场强震记录， 采用Nakayama方法生成记录的渐进谱， 并参照Kameda方式，用统计方法建立了根据震级、距离等地震参数预测渐进谱的统计模型. 提出一种以渐进谱为目标谱的生成幅值和频率非平稳地震加速度时程的迭代方法. 由于考虑了渐进谱幅值和相位的相互影响，所生成的时程的相位也是时频非平稳的，并在相位调整中识别了相位谱增量符号以加速迭代收敛进程. 最后根据统计回归的目标渐进谱模型和本文提出的拟合目标渐进谱的方法，可生成不同震级、距离条件下的幅值和频率均非平稳的地震加速度时程. 相似文献
17.
The seismic performance of conventional wood‐frame structures in south‐western British Columbia is analytically investigated through incremental dynamic analysis by utilizing available UBC‐SAWS models, which were calibrated based on experimental test results. To define an adequate target response spectrum that is consistent with information from national seismic hazard maps, record selection/scaling based on the conditional mean spectrum (CMS) is implemented. Furthermore, to reflect complex seismic hazard contributions from different earthquake sources (i.e. crustal events, interface events, and inslab events), we construct CMS for three earthquake types, and use them to select and scale an adequate set of ground motion records for the seismic performance evaluation. We focus on the impacts of adopting different record selection criteria and of using different shear‐wall types (Houses 1–4; in terms of seismic resistance, House 1>House 2>House 3>House 4) on the nonlinear structural response. The results indicate that the record selection procedures have significant influence on the probabilistic relationship between spectral acceleration at the fundamental vibration period and maximum inter‐story drift ratio, highlighting the importance of taking into account response spectral shapes in selecting and scaling ground motion records. Subjected to ground motions corresponding to the return period of 2500 years, House 1 is expected to experience very limited extent of damage; Houses 2 and 3 may be disturbed by minor damage; whereas House 4 may suffer from major damage occasionally. Finally, we develop statistical models of the maximum inter‐story drift ratio conditioned on a seismic intensity level for wood‐frame houses, which is useful for seismic vulnerability assessment. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
18.
The effect of the long‐period filter cut‐off, Tc, on elastic spectral displacements is investigated using a strong ground‐motion database from Europe and the Middle East. The relation between the filter and oscillator responses is considered to observe the influence of Tc for both analogue and digital records, and the variations with site classification, magnitude, filter order and viscous damping. Robust statistics are derived using the re‐processed European data to generalize the effects of the long‐period filter cut‐off on maximum oscillator deformation demands as a function of these seismological and structural features. Statistics with a 95% confidence interval are derived to suggest usable period ranges for spectral displacement computations as a function of Tc. The results indicate that the maximum period at which spectral displacements can be confidently calculated depend strongly on the site class, magnitude and filter order. The period range where reliable long‐period information can be extracted from digital accelerograms is twice that of analogue records. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
19.
The next generation of seismic design codes, especially those adopting the framework of performance‐based design, will include the option of design based on displacements rather than forces. For direct displacement‐based design using the substitute structure approach, the spectral ordinates of displacement need to be specified for a wide range of response periods and for several levels of damping. The code displacement spectra for damping values higher than the nominal value of 5% of critical will generally be obtained, as is the case in Eurocode 8 and other design codes, by applying scaling factors to the 5% damped ordinates. These scaling factors are defined as functions of the damping ratio and, in some cases, the response period, but are independent of the nature of the expected ground shaking. Using both predictive equations for spectral ordinates at several damping levels and stochastic simulations, it is shown that the scaling factors for different damping levels vary with magnitude and distance, reflecting a dependence of the scaling on the duration of shaking that increases with the damping ratio. The options for incorporating the influence of this factor into design code specifications of displacement response spectra are discussed. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
20.
Amplitude scaling is commonly used to select ground motions matching a target response spectrum. In this paper, the effect of scaling limits on ground motion selection, based on the conditional spectrum framework, is investigated. Target spectra are computed for four probabilistic seismic hazard cases in Western United States, and 16 ground motion suites are selected using different scaling limits (ie, 2, 5, 10, and 15). Comparison of spectral acceleration distributions of the selected ground motion suites demonstrates that the use of a scaling limit of 2 yields a relatively poor representation of the target spectra, because of the small limit leading to an insufficient number of available ground motions. It is also shown that increasing scaling limit results in selected ground motions with generally increased distributions of Arias intensity and significant duration Ds5-75, implying that scaling limit consideration can significantly influence the cumulative and duration characteristics of selected ground motions. The ground motion suites selected are then used as input for slope displacement and structural dynamic analyses. Comparative results demonstrate that the consideration of scaling limits in ground motion selection has a notable influence on the distribution of the engineering demand parameters calculated (ie, slope displacement and interstory drift ratio). Finally, based on extensive analyses, a scaling limit range of 3 to 5 is recommended for general use when selecting ground motion records from the NGA-West2 database. 相似文献