共查询到20条相似文献，搜索用时 31 毫秒
1.
《Physics of the Earth and Planetary Interiors》2004,141(4):303-326
The results of detailed investigation into the geometry of distribution of earthquakes around and below the volcanoes Korovin, Cleveland, Makushin, Yake-Dake, Oshima, Lewotobi, Fuego, Sangay, Nisyros and Montagne Pelée at convergent plate margins are presented. The ISC hypocentral determinations for the period 1964-1999, based on data of global seismic network and relocated by Engdahl, van der Hilst and Buland, have been used.The aim of this study has been to contribute to the solution of the problem of location of source regions of primary magma for calc-alkaline volcanoes spatially and genetically related to the process of subduction. Several specific features of seismicity pattern were revealed in this context. (i) A clear occurrence of the intermediate-depth aseismic gap (IDAG) in the Wadati-Benioff zone (WBZ) below all investigated active volcanoes. We interpret this part of the subducted slab, which does not contain any teleseismically recorded earthquake with magnitude greater than 4.0, as a partially melted domain of oceanic lithosphere and as a possible source of primary magma for calc-alkaline volcanoes. (ii) A set of earthquakes in the shape of a seismically active column (SAC) seems to exists in the continental wedge below volcanoes Korovin, Makushin and Sangay. The seismically active columns probably reach from the Earth surface down to the aseismic gap in the Wadati-Benioff zone. This points to the possibility that the upper mantle overlying the subducted slab does not contain large melted domains, displays an intense fracturing and is not likely to represent the site of magma generation. (iii) In the continental wedge below the volcanoes Cleveland, Fuego, Nisyros, Yake-Dake, Oshima and Lewotobi, shallow seismicity occurs down to the depth of 50 km. The domain without any earthquakes between the shallow seismically active column and the aseismic gap in the Wadati-Benioff zone in the depth range of 50-100 km does not exclude the melting of the mantle also above the slab. (iv) Any earthquake does not exist in the lithospheric wedge below the volcano Montagne Pelée. The source of primary magma could be located in the subducted slab as well as in the overlying mantle wedge. (v) Frequent aftershock sequences accompanying stronger earthquakes in the seismically active columns indicate high fracturing of the wedge below active volcanoes. (vi) The elongated shape of clusters of epicentres of earthquakes of seismically active columns, as well as stable parameters of the available fault plane solutions, seem to reflect the existence of dominant deeply rooted fracture zones below volcanoes. These facts also favour the location of primary magma in the subducting slab rather than in the overlying wedge.We suppose that melts advancing from the slab toward the Earth surface may trigger the observed earthquakes in the continental wedge that is critically pre-stressed by the process of subduction. However, for definitive conclusions it will be necessary to explain the occurrence of earthquake clusters below some volcanoes and the lack of seismicity below others, taking into account the uncertainty of focal depth determination from global seismological data in some regions. 相似文献
2.
Summary The discovery of paleoplates buried in the upper mantle leads to an interpretation of the subduction as a discontinuous process running in cycles and shifting the place of its operation in or against the direction of ocean floor spreading. This mechanism explains the distribution of calc-alkaline volcanism of different age in fossil convergent plate boundaries. The establishment of regular spatial correlation of the aseismic gap in the Wadati-Benioff zones with the distribution of calc-alkaline volcanism enables to reconstruct fossil plate boundaries and to define allochtonous terranes in apparently homogeneous continental plates. The hampering effect of the ocean floor morphology and of the fragments of continental plates approaching the trench, which substantially influences the rates of subduction and the geodynamic history of active continental margins in different domains along the trench, allows us to understand the complicated geological development of continental wedges in fossil convergent plate margins. The establishment of the segmented nature of active subduction zones and the dramatic morphology of the lower limit of the active subducted slab along the trench help us to interpret extensive lateral gaps in volcanic chains overlying active as well as fossil subduction zones. 相似文献
3.
日本俯冲带与IBM俯冲带位于太平洋板块、菲律宾海板块和欧亚板块三者的交汇地带,是典型的"俯冲工厂"地区,具有重要的研究意义.本文利用震源分布资料与卫星重力数据对日本俯冲带与IBM俯冲带进行了研究.通过空间重力异常反映了俯冲带地区的区域构造形态,在此基础上基于艾利模式计算了均衡异常以反映地壳均衡特征.利用震源分布资料,分别从垂直俯冲带走向与沿俯冲带走向划定了横截剖面(cross-sections)进行了地震提取,讨论了俯冲带地区的Wadati-Benioff带形态特征,并借助于俯冲带地震等深线图直观描述了俯冲带的俯冲形态.在日本俯冲带与伊豆—小笠原俯冲带各选取了一条典型剖面进行了重力2.5D反演,研究了俯冲带地区的壳幔结构特征.研究结果表明,九州—帕劳海脊与IBM岛弧在均衡异常上存在差异,前者已逐渐趋向于地壳均衡.IBM的Wadati-Benioff带存在明显的南北差异,反映出伊豆—小笠原俯冲板片停留在了660km转换带中,而马里亚纳俯冲板片很可能垂直穿过了这一转换带,造成这种南北差异的原因与板块相对运动、岩石圈黏性和年龄差异以及俯冲板片的重力效应等因素有关.在IBM的中部和南部存在板片撕裂现象.日本俯冲带的俯冲洋壳密度随俯冲深度变化较小,洋幔存在一定程度的蛇纹岩化,地幔楔蛇纹岩化作用不典型,海沟处有一范围较小的含水畸变带;伊豆—小笠原俯冲带俯冲洋壳密度随深度增大而明显增大,洋幔蛇纹岩化程度较日本俯冲带低,地幔楔蛇纹岩化作用强烈,板块交汇处存在明显的蛇纹岩底辟.日本俯冲带与IBM俯冲带一线自北向南板片俯冲变陡,两侧板块耦合度降低,与俯冲带两侧的板块运动速率差异有关. 相似文献
4.
The transport of water in subduction zones 总被引：9，自引：0，他引：9
The transport of water from subducting crust into the mantle is mainly dictated by the stability of hydrous minerals in subduction zones. The thermal structure of subduction zones is a key to dehydration of the subducting crust at different depths. Oceanic subduction zones show a large variation in the geotherm, but seismicity and arc volcanism are only prominent in cold subduction zones where geothermal gradients are low. In contrast, continental subduction zones have low geothermal gradients, resulting in metamorphism in cold subduction zones and the absence of arc volcanism during subduction. In very cold subduction zone where the geothermal gradient is very low(?5?C/km), lawsonite may carry water into great depths of ?300 km. In the hot subduction zone where the geothermal gradient is high(25?C/km), the subducting crust dehydrates significantly at shallow depths and may partially melt at depths of 80 km to form felsic melts, into which water is highly dissolved. In this case, only a minor amount of water can be transported into great depths. A number of intermediate modes are present between these two end-member dehydration modes, making subduction-zone dehydration various. Low-T/low-P hydrous minerals are not stable in warm subduction zones with increasing subduction depths and thus break down at forearc depths of ?60–80 km to release large amounts of water. In contrast, the low-T/low-P hydrous minerals are replaced by low-T/high-P hydrous minerals in cold subduction zones with increasing subduction depths, allowing the water to be transported to subarc depths of 80–160 km. In either case, dehydration reactions not only trigger seismicity in the subducting crust but also cause hydration of the mantle wedge. Nevertheless, there are still minor amounts of water to be transported by ultrahigh-pressure hydrous minerals and nominally anhydrous minerals into the deeper mantle. The mantle wedge overlying the subducting slab does not partially melt upon water influx for volcanic arc magmatism, but it is hydrated at first with the lowest temperature at the slab-mantle interface, several hundreds of degree lower than the wet solidus of hydrated peridotites. The hydrated peridotites may undergo partial melting upon heating at a later time. Therefore, the water flux from the subducting crust into the overlying mantle wedge does not trigger the volcanic arc magmatism immediately. 相似文献
5.
The origin of El Chichón volcano is poorly understood, and we attempt in this study to demonstrate that the Tehuantepec Ridge (TR), a major tectonic discontinuity on the Cocos plate, plays a key role in determining the location of the volcano by enhancing the slab dehydration budget beneath it. Using marine magnetic anomalies we show that the upper mantle beneath TR undergoes strong serpentinization, carrying significant amounts of water into subduction. Another key aspect of the magnetic anomaly over southern Mexico is a long-wavelength (∼ 150 km) high amplitude (∼ 500 nT) magnetic anomaly located between the trench and the coast. Using a 2D joint magnetic-gravity forward model, constrained by the subduction P–T structure, slab geometry and seismicity, we find a highly magnetic and low-density source located at 40–80 km depth that we interpret as a partially serpentinized mantle wedge formed by fluids expelled from the subducting Cocos plate. Using phase diagrams for sediments, basalt and peridotite, and the thermal structure of the subduction zone beneath El Chichón we find that ∼ 40% of sediments and basalt dehydrate at depths corresponding with the location of the serpentinized mantle wedge, whereas the serpentinized root beneath TR strongly dehydrates (∼90%) at depths of 180-200 km comparable with the slab depths beneath El Chichón (200-220 km). We conclude that this strong deserpentinization pulse of mantle lithosphere beneath TR at great depths is responsible for the unusual location, singularity and, probably, the geochemically distinct signature (adakitic-like) of El Chichón volcano. 相似文献
6.
大洋板块俯冲到地幔转换带,进而可形成不同的形态:板块可以停滞在660km不连续面,抑或穿过地幔转换带进入下地幔.这些不同的俯冲模式可进一步影响到海沟的运动.为更好地理解上地幔中俯冲板片的变形行为以及俯冲过程与海沟运动之间的关系,本文通过建立一系列高精度二维热-力学自由俯冲的数值模型,揭示了俯冲板块在上地幔中的变形方式及其与地幔转换带之间的相互作用过程.模拟结果显示,在俯冲板块与地幔转换带的相互作用过程中,其动力学过程可以分为以海沟后撤主导、海沟前进主导以及稳定型海沟等三种主要动力学类型.对于年龄较老,厚度较大的俯冲板块容易形成海沟后撤型俯冲,俯冲板块停滞在660km不连续面.相反,年龄较小,塑性强度较小的板块容易形成海沟前进型俯冲,俯冲板块穿越660km不连续面. 相似文献
7.
Haruhisa Nakamichi Satoru Tanaka Hiroyuki Hamaguchi 《Journal of Volcanology and Geothermal Research》2002,116(3-4)
A genetic algorithm inversion of receiver functions derived from a dense seismic network around Iwate volcano, northeastern Japan, provides the fine S wave velocity structure of the crust and uppermost mantle. Since receiver functions are insensitive to an absolute velocity, travel times of P and S waves propagating vertically from earthquakes in the subducting slab beneath the volcano are involved in the inversion. The distribution of velocity perturbations in relation to the hypocenters of the low-frequency (LF) earthquakes helps our understanding of deep magmatism beneath Iwate volcano. A high-velocity region (dVS/VS=10%) exists around the volcano at depths of 2–15 km, with the bottom depth decreasing to 11 km beneath the volcano’s summit. Just beneath the thinning high-velocity region, a low-velocity region (dVS/VS=−10%) exists at depths of 11–20 km. Intermediate-depth LF (ILF) events are distributed vertically in the high-velocity region down to the top of the low-velocity region. This distribution suggests that a magma reservoir situated in the low-velocity region supplies magma to a narrow conduit that is detectable by the hypocenters of LF earthquakes. Another broad low-velocity region (dVS/VS=−5 to −10%) occurs at depths of 17–35 km. Additional clusters of deep LF (DLF) events exist at depths of 32–37 km in the broad low-velocity zone. The DLF and ILF events are the manifestations of magma movement near the Moho discontinuity and in the conduit just beneath the volcano, respectively. 相似文献
8.
9.
《Earth and Planetary Science Letters》2006,241(3-4):387-397
Thermal models of subduction zones often base their slab–wedge geometry from seismicity at mantle depths and, consequently, cannot be used to evaluate the relationship between seismicity and structure. Here, high-resolution seismic observations from the recent Broadband Experiment Across the Alaska Range (BEAAR) constrain, in a rare instance, the subducting slab geometry and mantle wedge temperature independent of seismicity. Receiver functions reveal that the subducting crust descends less steeply than the Wadati-Benioff Zone. Attenuation tomography of the mantle wedge reveals a high Q and presumably cold region where the slab is less than 80 km deep. To understand these two observations, we generate thermal models that use the improved wedge geometry from receiver functions and that incorporate temperature- and strain-rate-dependent olivine rheology. These calculations show that seismicity within the subducting crust falls in a narrow belt of pressure–temperature conditions, illuminating an effective Clapeyron slope of 0.1 K/MPa at temperatures of 450–750 °C. These conditions typify the breakdown of high-pressure hydrous minerals such as lawsonite and suggest that a single set of dehydration reactions may trigger intermediate-depth seismicity. The models also require that the upper, cold nose of the mantle wedge be isolated from the main flow in the mantle wedge in order to sustain the cold temperatures inferred from the Q tomography. Possibly, sufficient mechanical decoupling occurs at the top of the downgoing slab along a localized shear zone to 80 km depth, considerably deeper than inferred from thrust zone seismicity. 相似文献
10.
The Arica Elbow region represents that part of Andean South America where the azimuth of the strike of the Peru-Chile trench changes from 150° to 190°. The area under study is roughly bounded by latitudes 17 °S and 23 °S, The shape of the Wadati-Benioff zone was studied in terms of the distribution of ISC hypocentres dated between 1964 and 1993. A system of 22 vertical cross-sections, perpendicular to the trench axis, and a map of epicentres was used to derive the detailed shape of the Wadati-Benioff zone of the presently descending slab. The distribution of earthquake foci indicates a fingerlike shape of the lower part of the Wadati-Benioff zone beneath the aseismic gap. The slab length shows small changes around 350 km in the northern sections, pronounced length oscillations between 350 and 750 km in the neighbouring central sections and a constant value of 650 km in the southern sections. The dip and thickness of the Wadati-Benioff zone are practically constant in all sections. Fault plane solutions, separated spatially into three zones, were used to estimate the state of stress in the slab. 相似文献
11.
Summary The morphology of the Wadati-Benioff zone in the region of Central Kuriles, based on the distribution of 1202 earthquake foci, verified the existence of an intermediate depth aseismic gap and its relation to active andesitic volcanism. Several deep seismically active fracture zones of different tectonic function were delineated in the continental plate and confirmed by the results of deep seismic sounding. A seismically active fracture zone, found in front of the Kamchatka-Kurile trench, indicates the segmented nature of fracturing of the subducting Pacific plate. 相似文献
12.
Summary The morphology of the Wadati-Benioff zone in the Kermadec region, based on the distribution of 1100 earthquake foci, verified the existence of an intermediate aseismic gap and its relation to active andesitic volcanism, and the non-uniformity of subduction due to the hampering effect of the main structural features of the subducting Pacific plate. Two cycles of the recently active subduction in the Tonga-Kermadec island arc were found. 相似文献
13.
We present a study of the lateral structure and mode of deformation in the transition between the Kuril and Honshu subduction zones. We begin by examining the source characteristics of the January 19, 1969, intermediate depth earthquake north of Hokkaido in the framework of slab-tearing, which for the December 6, 1978 event has been well documented by previous studies. We use a least-squares body wave inversion technique, and find that its focal mechanism is comparable to the 1978 event. To understand the cause of these earthquakes, which in the case of the 1978 event occurred on a vertical tear fault but does not represent hinge faulting, we examine the available International Seismological Centre [ISC] hypocenters and Harvard centroid-moment tensor [CMT] solutions to determine the state of stress, and lateral structure and segmentation in the Kuril and northern Honshu slabs. These data are evaluated in the framework of two models. Model (A) requires the subducting slab at the Hokkaido corner to maintain surface area. Model (B) requires slab subduction to be dominated by gravity, with material subducting in the down-dip direction. The distribution of ICS hypocenters shows a gap in deep seismicity down-dip of the Hokkaido corner, supporting model (B). From the CMT data set we find that three types of earthquake focal mechanisms occur. The first (type A) represents dip-slip mechanisms consistent with down-dip tension or compression in the slab in a direction normal to the strike of the trench. These events occur throughout the Honshu and Kuril slabs with focal mechanisms beneath Hokkaido showing NNW plungingP andT axes consistent with the local slab geometry. The second (type B) occurs primarily at depths over 300 km in the southern part of the Kuril slab with a few events in the northern end of the Honshu deep seismicity. These earthquakes have focal mechanisms with P axes oriented roughly E-W, highly oblique to the direction of compression found in the type A events, with which they are spatially interspersed. The third (type C) group of earthquakes are those events which do not fit in either of the first two groups and consist of either strike-slip focal mechanisms, such as the tearing events, or oddly oriented focal mechanisms. Examination of the stress axes orientations for these three types reveals that the compressional axes of the type C events are consistent with those of type B. The slab tearing events are just differential motion reflecting the E-W compressive states of stress which is responsible for the type B family of events. There is no need to invoke down-dip extension which does not fit the slab geometry. We conclude that these two states of stress can be explained as follows: 1) The type A events and the seismicity distribution support model (B). 2) The type B and C events upport model (A). The solution is that the slab subducts according to model (B), but the flow in the mantle maintains a different trajectory, possibly induced by the plate motions, which produces the second state of E-W compressive stress. 相似文献
14.
Adakitic magmas in the Ecuadorian Volcanic Front: Petrogenesis of the Iliniza Volcanic Complex (Ecuador) 总被引：1，自引：0，他引：1
Silvana Hidalgo Michel Monzier Hervé Martin Gilles Chazot Jean-Philippe Eissen Jo Cotten 《Journal of Volcanology and Geothermal Research》2007
The Iliniza Volcanic Complex (IVC) is a poorly known volcanic complex located 60 km SSW of Quito in the Western Cordillera of Ecuador. It comprises twin peaks, North Iliniza and South Iliniza, and two satellite domes, Pilongo and Tishigcuchi. The study of the IVC was undertaken in order to better constrain the role of adakitic magmas in the Ecuadorian arc evolution. The presence of volcanic rocks with an adakitic imprint or even pristine adakites in the Ecuadorian volcanic arc is known since the late 1990s. Adakitic magmas are produced by the partial melting of a basaltic source leaving a garnet rich residue. This process can be related to the melting of an overthickened crust or a subducting oceanic crust. For the last case a special geodynamic context is required, like the subduction of a young lithosphere or when the subduction angle is not very steep; both cases are possible in Ecuador. The products of the IVC, made up of medium-K basaltic andesites, andesites and dacites, have been divided in different geochemical series whose origin requires various interactions between the different magma sources involved in this subduction zone. North Iliniza is a classic calc-alkaline series that we interpret as resulting from the partial melting of the mantle wedge. For South Iliniza, a simple evolution with fractional crystallization of amphibole, plagioclase, clinopyroxene, magnetite, apatite and zircon from a parental magma, being itself the product of the mixing of 36% adakitic and 64% calc-alkaline magma, has been quantified. For the Santa Rosa rhyolites, a slab melting origin with little mantle interactions during the ascent of magmas has been established. The Pilongo series magma is the product of a moderate to high degree (26%) of partial melting of the subducting oceanic crust, which reached the surface without interaction with the mantle wedge. The Tishigcuchi series shows two stages of evolution: (1) metasomatism of the mantle wedge peridotite by slab melts, and (2) partial melting (10%) of this metasomatized source. Therefore, the relative ages of the edifices show a geochemical evolution from calc-alkaline to adakitic magmas, as is observed for several volcanoes of the Ecuadorian arc. 相似文献
15.
Past studies have shown that high coastal uplift rates are restricted to active areas, especially in a subduction context. The origin of coastal uplift in subduction zones, however, has not yet been globally investigated. Quaternary shorelines correlated to the last interglacial maximum (MIS 5e) were defined as a global tectonic benchmark (Pedoja et al., 2011). In order to investigate the relationships between the vertical motion and the subduction dynamic parameters, we cross-linked this coastal uplift database with the “geodynamical” databases from Heuret (2005), Conrad and Husson (2009) and Müller et al. (2008). Our statistical study shows that: (1) the most intuitive parameters one can think responsible for coastal uplift (e.g., subduction obliquity, trench motion, oceanic crust age, interplate friction and force, convergence variation, dynamic topography, overriding and subducted plate velocity) are not related with the uplift (and its magnitude); (2) the only intuitive parameter is the distance to the trench which shows in specific areas a decrease from the trench up to a distance of ∼300 km; (3) the slab dip (especially the deep slab dip), the position along the trench and the overriding plate tectonic regime are correlated with the coastal uplift, probably reflecting transient changes in subduction parameters. Finally we conclude that the first order parameter explaining coastal uplift is small-scale heterogeneities of the subducting plate, as for instance subducting aseismic ridges. The influence of large-scale geodynamic setting of subduction zones is secondary. 相似文献
16.
In this paper, we present seismological evidence for the influence of fluids and magma on the generation of large earthquakes in the crust and the subducting oceanic slabs under the Japan Islands. The relationship between seismic tomography and large crustal earthquakes (M=5.7-8.0) in Japan during a period of 116 years from 1885 to 2000 is investigated and it is found that most of the large crustal earthquakes occurred in or around the areas of low seismic velocity. The low-velocity zones represent weak sections of the seismogenic crust. The crustal weakening is closely related to the subduction process in this region. Along the volcanic front and in back-arc areas, the crustal weakening is caused by active volcanoes and arc magma resulting from the convective circulation process in the mantle wedge and dehydration reactions in the subducting slab. In the forearc region of southwest Japan, fluids are suggested in the 1995 Kobe earthquake source zone, which have contributed to the rupture nucleation. The fluids originate from the dehydration of the subducting Philippine Sea slab. The recent 2001 Geiyo earthquake (M=6.8) occurred at 50 km depth within the subducting Philippine Sea slab, and it was also related to the slab dehydration process. A detailed 3D velocity structure is determined for the northeast Japan forearc region using data from 598 earthquakes that occurred under the Pacific Ocean with hypocenters well located with SP depth phases. The results show that strong lateral heterogeneities exist along the slab boundary, which represent asperities and results of slab dehydration and affect the degree and extent of the interplate seismic coupling. These results indicate that large earthquakes do not strike anywhere, but only anomalous areas which can be detected with geophysical methods. The generation of a large earthquake is not a pure mechanical process, but is closely related to physical and chemical properties of materials in the crust and upper mantle, such as magma, fluids, etc. 相似文献
17.
The Variation of Stresses due to Aseismic Sliding and its Effect on Seismic Activity 总被引：2，自引：0，他引：2
— Numerical simulation of recurring large interplate earthquakes in a subduction zone is conducted to explore the effects of aseismic sliding on the variation of stresses and the activity of small earthquakes. The frictional force obeying a rate- and state-dependent friction law is assumed to act on the plate interface in a 2-D model of uniform elastic half-space. The simulation results show that large earthquakes repeatedly occur at a constant time interval on a shallow part of the plate interface and that aseismic sliding migrates from the upper aseismic zone as well as from the lower aseismic zone into the central part of the seismogenic zone before the occurrence of a large interplate earthquake. This spatiotemporal variation of aseismic sliding significantly perturbs the stresses in the overriding plate and in the subducting oceanic plate, leading to the precursory seismic quiescence in the overriding plate and the activation of the intermediate-depth earthquakes of down-dip tension type. After the occurrence of a large interplate earthquake, the activity of the intermediate-depth earthquakes of down-dip compression type in the subducting slab is expected to increase and migrate downward. This is because the downward propagation of postseismic sliding causes the downward migration of compressional-stress increase in the down-dip direction of the plate interface. The simulation result further indicates that episodic events of aseismic sliding may occur when the spatial distributions of friction parameters are significantly nonuniform. The variation of stresses due to episodic sliding is expected to cause seismicity changes. 相似文献
18.
基于Ｍｕｒｎａｇｈａｎ－Ｂｉｒｃｈ状态方程，计算了密度Ｐ、热膨胀系数ａｖ、定压比热ｃｐ等物性参数在上地幔温压条件下的分布，给出了热传导系数ｋ在上地幔温压条件下的分布．采用准动力学计算方案，用有限元方法计算了板块不同俯冲速度、角度、不同厚度及不同俯冲深度情况下俯冲带的温度分布和密度分布．计算了不同俯冲模型下俯冲带的负浮力及其对岩石层板块形成的等效应力，发现负浮力在俯冲过程中是变化的，俯冲速度和板块厚度对其有明显的影响，在稳定俯冲状态，负浮力约为（１．５－２．３）×１０１３Ｎｍ－１，等效张应力约为０．２５－０．２９Ｇｐａ． 相似文献
19.
—Gephart and Forsyth’s (1984) algorithm for stress inversion of earthquake fault-plane solutions has been applied to a set of ninety intermediate and deep events occurring in the southern Tyrrhenian region between 1976 and 1995. P- and S-wave data from local seismic networks in southern Italy, the Italian National Network and international bulletins, have been used for hypocenter and focal mechanism computations. Stress inversion runs performed after accurate selection and weighting of fault-plane solutions have allowed us to identify stress space variations at a higher level of detail than available from all previous investigations carried out in the study area. The maximum compressive stress has been shown to follow the depth-decreasing dip of the Wadati-Benioff zone, along the entire zone from a depth of 90 km, to the depth of the deepest events (about 500 km). Variations to such a stress pattern have been found, possibly related to mantle dynamics and the complex composition of the subducting structure. The diffused state of down-dip compression suggests that the Tyrrhenian subduction has already evolved to the point where the lower end of the slab has reached high-strength mantle materials, the load of the excess mass is entirely supported from below and most of the subducted slab is under compression. In agreement with the lack of large, shallow thrusting events in the immersion zone, the findings of the present study appear to agree well with geodynamic models assuming a passive subduction process with eastward roll-back of the Ionian lithosphere in the study area. In this context, the depth-decrease of the slab dip may also find a reasonable explanation. 相似文献
20.
大陆深俯冲及超高压变质作用是大陆动力学的重要研究内容,前人进行了系统的地质、地球物理观测以及数值模拟研究.然而,自然界中大陆板块的俯冲、碰撞及造山过程大部分具有明显的沿走向的差异性,这种典型的三维特征可能很大程度上依赖于会聚大陆板块的初始几何学和运动学特征.本文采用三维高分辨率的动力学数值模拟方法,建立了方形大陆板块和楔形大陆板块两种不同的俯冲-碰撞模型,并且俯冲大陆板块侧面与大洋俯冲带相邻.数值模拟结果揭示大洋板块可以持续地俯冲到地幔之中,而大陆板块俯冲到一定深度处,其前端的俯冲板块将发生断离,并进而造成残余的大陆板块俯冲角度的减小.方形大陆俯冲板块的断离深度约为150km,而楔形大陆俯冲板块的断离深度较大,约250~300km,这很大程度上取决于俯冲带中大洋板块的牵引力和大陆板块的负浮力之间的竞争关系.同时,无论方形还是楔形大陆板块俯冲模型中,板块断离后,侧向的大洋俯冲板块仍可以拖曳约60~70km宽的大陆边缘岩石圈持续向下俯冲,揭示了新西兰东部的洋-陆空间转换俯冲带的动力学机制.并且,数值模型与喜马拉雅造山带和秦岭—大别—苏鲁造山带进行了对比,进而对其高压-超高压岩石空间展布沿走向的差异性特征和机制提供了一定的启示. 相似文献