首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 800 毫秒
1.
Eclogite facies metatroctolites from a variety of Western Alps localities (Voltri, Monviso, Lanzo, Allalin, Zermat–Saas, etc.) that preserve textural evidence of their original form as bimineralic olivine‐plagioclase rocks are considered in terms of calculated mineral equilibria in the system Na2O‐CaO‐FeO‐MgO‐Al2O3‐SiO2‐H2O (NCFMASH). Pseudosections, based on a new petrogenetic grid for NCFMASH presented here, are used to unravel the metamorphic history of the metatroctolites, considering the rocks to consist of different composition microdomains corresponding to the original olivine and plagioclase grains. On the basis that the preservation of the mineral assemblage in each microdomain will tend to be from where on a rock's P–T path the metamorphic fluid phase is used up via rehydration reactions, P–T pseudosections contoured for water content, and P–T path‐MH2O (amount of water) pseudosections, are used to examine fluid behaviour in each microdomain. We show that the different microdomains are likely to preserve their mineral assemblages from different places on the P–T path. For the olivine microdomain, the diagnostic mineral assemblage is chloritoid + talc (+ garnet + omphacite). The preservation of this assemblage, in the light of the closed system P–T path‐MH2O relationships, implies that the microdomain loses its metamorphic fluid as it starts to decompress, and, in the absence of subsequent hydration, the high pressure mineral assemblage is then preserved. In the plagioclase microdomain, the diagnostic assemblage is epidote (or zoisite) + kyanite + quartz suggesting a lower pressure (of about 2 GPa) than for the olivine microdomain. In the light of P–T path‐MH2O relationships, development of this assemblage implies breakdown of lawsonite across the lawsonite breakdown reaction, regardless of the maximum pressure reached. It is likely that the plagioclase microdomain was mainly fluid‐absent prior to lawsonite breakdown, only becoming fluid‐present across the reaction, then immediately becoming fluid‐absent again.  相似文献   

2.
Magnesian metamorphic rocks with metapelitic mineral assemblage and composition are of great interest in metamorphic petrology for their ability to constrain P–T conditions in terranes where metamorphism is not easily visible. Phase–assemblage diagrams for natural and model magnesian metapelites in the system KFMASH are presented to document how phase relationships respond to water activity, bulk composition, pressure and temperature. The phase assemblages displayed on these phase diagrams are consistent with natural mineral assemblages occurring in magnesian metapelites. It is shown that the equilibrium assemblages at high pressure conditions are very sensitive to a(H2O). Specifically, the appearance of the characteristic HP assemblage chloritoid–talc–phengite–quartz (with excess H2O) in the magnesian metapelites of the Monte Rosa nappe (Western Alps) is due to the reduction of a(H2O). Furthermore, the mineral assemblages are determined by the whole-rock FeO/(FeO+MgO) ratio and effective Al content X A as well as P and T. The predicted mineral associations for the low- and high-X A model bulk compositions of magnesian metapelites at high pressure are not dependent on the X A variations as they show a similar sequence of mineral assemblages. Above 20 kbar, the prograde sequence of assemblages associated with phengite (with excess SiO2 and H2O) for low- and high-X A bulk compositions of magnesian metapelites is: carpholite–chlorite → chlorite–chloritoid → chloritoid–talc → chloritoid–talc–kyanite → talc–garnet–kyanite → garnet–kyanite ± biotite. At low to medium P–T conditions, a low-X A stabilises the phengite-bearing assemblages associated with chlorite, chlorite + K-feldspar and chlorite + biotite while a high-X A results in the chlorite–phengite bearing assemblages associated with pyrophyllite, andalusite, kyanite and carpholite. A high-X A magnesian metapelite with nearly iron-free content stabilises the talc–kyanite–phengite assemblage at moderate to high P–T conditions. Taking into account the effective bulk composition and a(H2O) involved in the metamorphic history, the phase–assemblage diagrams presented here may be applied to all magnesian metapelites that have compositions within the system KFMASH and therefore may contribute to gaining insights into the metamorphic evolution of terranes. As an example, the magnesian metapelites of the Monte Rosa nappe have been investigated, and an exhumation path with P–T conditions for the western roof of the Monte Rosa nappe has been derived for the first time. The exhumation shows first a near-isothermal decompression from the Alpine eclogite peak conditions around 24 kbar and 505°C down to approximately 8 kbar and 475°C followed by a second decompression with concomitant cooling.M. Frey: deceased  相似文献   

3.
Melt loss and the preservation of granulite facies mineral assemblages   总被引：29，自引：3，他引：29  
The loss of a metamorphic fluid via the partitioning of H2O into silicate melt at higher metamorphic grade implies that, in the absence of open system behaviour of melt, the amount of H2O contained within rocks remains constant at temperatures above the solidus. Thus, granulite facies rocks, composed of predominantly anhydrous minerals and a hydrous silicate melt should undergo considerable retrogression to hydrous upper amphibolite facies assemblages on cooling as the melt crystallizes and releases its H2O. The common occurrence of weakly retrogressed granulite facies assemblages is consistent with substantial melt loss from the majority of granulite facies rocks. Phase diagram modelling of the effects of melt loss in hypothetical aluminous and subaluminous metapelitic compositions shows that the amount of melt that has to be removed from a rock to preserve a granulite facies assemblage varies markedly with rock composition, the number of partial melt loss events and the P–T conditions at which melt loss occurs. In an aluminous metapelite, the removal of nearly all of the melt at temperatures above the breakdown of biotite is required for the preservation of the peak mineral assemblage. In contrast, the proportion of melt loss required to preserve peak assemblages in a subaluminous metapelite is close to half that required for the aluminous metapelite. Thus, if a given proportion of melt is removed from a sequence of metapelitic granulites of varying composition, the degree of preservation of the peak metamorphic assemblage may vary widely.  相似文献   

4.
Orogenic gold mineralization at the Damang deposit, Ghana, is associated with hydrothermal alteration haloes around gold‐bearing quartz veins, produced by the infiltration of a H2O–CO2–K2O–H2S fluid following regional metamorphism. Alteration assemblages are controlled by the protoliths with sedimentary rocks developing a typical assemblage of muscovite, ankerite and pyrite, while intrusive dolerite bodies contain biotite, ankerite and pyrrhotite, accompanied by the destruction of hornblende. Mineral equilibria modelling was undertaken with the computer program thermocalc , in subsets of the model system MnO–Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–CO2–H2O–TiO2–Fe2O3, to constrain conditions of regional metamorphism and the subsequent gold mineralization event. Metapelites with well‐developed amphibolite facies assemblages reliably constrain peak regional metamorphism at ~595 °C and 5.5 kbar. Observed hydrothermal alteration assemblages associated with gold mineralization in a wide compositional range of lithologies are typically calculated to be stable within P–T–X(CO2) arrays that trend towards lower temperatures and pressures with increasing equilibrium fluid X(CO2). These independent P–T–X(CO2) arrays converge and the region of overlap at ~375–425 °C and 1–2 kbar is taken to represent the conditions of alteration approaching equilibrium with a common infiltrating fluid with an X(CO2) of ~0.7. Fluid‐rock interaction calculations with M–X(CO2) diagrams indicate that the observed alteration assemblages are consistent with the addition of a single fluid phase requiring minimum fluid/rock ratios on the order of 1.  相似文献   

5.
The evolution of the mineral assemblages and P–T conditions during partial melting of upper‐amphibolite facies paragneisses in the Orue Unit, Epupa Complex, NW Namibia, is modelled with calculated P–T–X phase diagrams in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O system. The close concordance of predictions from the phase diagrams to petrographic observations and thermobarometric results documents that quantitative phase diagrams are suitable to explain the phase relationships in migmatitic upper‐amphibolite facies low‐ and medium‐pressure metapelites, which occur in many high‐grade metamorphic terranes worldwide. Different mineral assemblages in the migmatitic metapelites of the Orue Unit reflect regional discrepancies in the metamorphic grade: in a Northern Zone, early biotite–sillimanite–quartz assemblages were replaced via melt‐producing reactions by cordierite‐bearing assemblages. In a Southern Zone, they were replaced via melt‐producing reactions by garnet‐bearing assemblages while cordierite is restricted to rare metapelitic granofelses, which preserve Grt–Sil–Crd–Bt peak assemblages. Peak‐metamorphic conditions of 700–750 °C at 5.5–6.7 kbar in the Southern Zone and of ～750 °C at 4.5 kbar in the Northern Zone are estimated by integrating thermobarometric calculations with data from calculated mineral composition isopleths. Retrograde back‐reactions between restite and crystallizing melt are recorded by the replacement of garnet by biotite–sillimanite and/or biotite–muscovite intergrowths. Upper‐amphibolite facies metamorphism and partial melting (c. 1340–1320 Ma) in the rocks of the Southern Zone of the Orue Unit, which underwent probably near‐isobaric heating–cooling paths, are attributed to contact metamorphism induced by the coeval (c. 1385–1319 Ma) emplacement of the Kunene Intrusive Complex, a huge massif‐type anorthosite body. The lower‐pressure metapelites of the Northern Zone are interpreted to record contact metamorphism at an upper crustal level.  相似文献   

6.
Sapphirine, coexisting with quartz, is an indicator mineral for ultrahigh‐temperature metamorphism in aluminous rock compositions. Here a new activity‐composition model for sapphirine is combined with the internally consistent thermodynamic dataset used by THERMOCALC, for calculations primarily in K2O‐FeO‐MgO‐Al2O3‐SiO2‐H2O (KFMASH). A discrepancy between published experimentally derived FMAS grids and our calculations is understood with reference to H2O. Published FMAS grids effectively represent constant aH2O sections, thereby limiting their detailed use for the interpretation of mineral reaction textures in compositions with differing H2O. For the calculated KFMASH univariant reaction grid, sapphirine + quartz assemblages occur at P–T in excess of 6–7 kbar and 1005 °C. Sapphirine compositions and composition ranges are consistent with natural examples. However, as many univariant equilibria are typically not ‘seen’ by a specific bulk composition, the univariant reaction grid may reveal little about the detailed topology of multi‐variant equilibria, and therefore is of limited use for interpreting the P–T evolution of mineral assemblages and reaction sequences. Calculated pseudosections, which quantify bulk composition and multi‐variant equilibria, predict experimentally determined KFMASH mineral assemblages with consistent topology, and also indicate that sapphirine stabilizes at increasingly higher pressure and temperature as XMg increases. Although coexisting sapphirine and quartz can occur in relatively iron‐rich rocks if the bulk chemistry is sufficiently aluminous, the P–T window of stability shrinks with decreasing XMg. An array of mineral assemblages and mineral reaction sequences from natural sapphirine + quartz and other rocks from Enderby Land, Antarctica, are reproducible with calculated pseudosections. That consistent phase diagram calculations involving sapphirine can be performed allows for a more thorough assessment of the metamorphic evolution of high‐temperature granulite facies terranes than was previously possible. The establishment of a a‐x model for sapphirine provides the basis for expansion to larger, more geologically realistic chemical systems (e.g. involving Fe3+).  相似文献   

7.
Granulite facies magnesian metapelites commonly preserve a wide array of mineral assemblages and reaction textures that are useful for deciphering the metamorphic evolution of a terrane. Quantitative pressure, temperature and bulk composition constraints on the development and preservation of characteristic peak granulite facies mineral assemblages such as orthopyroxene + sillimanite + quartz are assessed with reference to calculated phase diagrams. In NCKFMASH and its chemical subsystems, peak assemblages form mainly in high‐variance fields, and most mineral assemblage changes reflect multivariant equilibria. The rarity of orthopyroxene–sillimanite–quartz‐bearing assemblages in granulite facies rocks reflects the need for bulk rock XMg of greater than approximately 0.60–0.65, with pressures and temperatures exceeding c. 8 kbar and 850 °C, respectively. Cordierite coronas mantling peak minerals such as orthopyroxene, sillimanite and quartz have historically been used to infer isothermal decompression P–T paths in ultrahigh‐temperature granulite facies terranes. However, a potentially wide range of P–T paths from a given peak metamorphic condition facilitate retrograde cordierite growth after orthopyroxene + sillimanite + quartz, indicating that an individual mineral reaction texture is unable to uniquely define a P–T vector. Therefore, the interpretation of P–T paths in high‐grade rocks as isothermal decompression or isobaric cooling may be overly simplistic. Integration of quantitative data from different mineral reaction textures in rocks with varying bulk composition will provide the strongest constraints on a P–T path, and in turn on tectonic models derived from these paths.  相似文献   

8.
固相线以下变质过程中水的行为   总被引：2，自引：0，他引：2  
在p–T 视剖面上定量计算全岩饱和水含量等值线可以更有效地讨论变质矿物组合的演化。Guiraud 等认为在封闭体系中发生的变质作用通过递进脱水作用使岩石向水含量降低方向演化,脱出的水离开岩石体系。当变质过程向水含量增加方向演化时,岩石会很快变成流体缺失状态,不利于变质矿物组合的进一步演化。因此,从岩石中的实际矿物组合所得到的“变质峰期”应该理解为脱水反应结束,并可能发生少量水化反应的位置,并不一定对应p–T 轨迹所经历的实际峰期温度或压力。利用p–T 视剖面图和饱和水含量等值线的行为研究阿尔泰造山带泥质岩石的中低压变质作用发现,阿尔泰地区红柱石型变质带的发生与蓝晶石型变质带的抬升有关,主要发生铝硅酸盐矿物之间的同质多相转变,低压变质矿物组合未能达到热力学平衡状态。与泥质岩中低压变质演化明显不同的是超高压榴辉岩在峰期以后的减压过程中仍然发生递进脱水作用。  相似文献   

9.
Using a previously published, internally consistent thermodynamic dataset and updated models of activity–composition relations for solid solutions, petrogenetic grids in the model system KFMASH (K2O–FeO–MgO–Al2O3–SiO2–H2O) and the subsystems KMASH and KFASH have been calculated with the software THERMOCALC 3.1 in the P–T range 5–36 kbar and 400–810 °C, involving garnet, chloritoid, biotite, carpholite, talc, chlorite, staurolite and kyanite/sillimanite with phengite, quartz/coesite and H2O in excess. These grids, together with calculated AFM compatibility diagrams and pseudosections, are shown to be powerful tools for delineating the phase equilibria and P–T conditions of pelitic high-P assemblages for a variety of bulk compositions. The calculated equilibria and mineral compositions are in good agreement with petrological observation. The calculation indicates that the typical whiteschist assemblage kyanite–talc is restricted to the rocks with extremely high XMg values, decreasing XMg in a bulk composition favoring the stability of chloritoid and garnet. Also, the chloritoid–talc paragenesis is stable over 19–20 kbar in a temperature range of ca. 520–620 °C, being more petrologically important than the previously highlighted assemblage talc–phengite. Moreover, contours of the calculated Si isopleths in phengite in P–T and P–X pseudosections for different bulk compositions extend the experimentally derived phengite geobarometers to various KFMASH assemblages.  相似文献   

10.
We have investigated the effects of different Fe2O3 bulk contents on the calculated phase equilibria of low‐T/intermediate‐P metasedimentary rocks. Thermodynamic modelling within the MnO–Na2O–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (MnNKFMASHTO) chemical system of chloritoid‐bearing hematite‐rich metasedimentary rocks from the Variscan basement of the Pisani Mountains (Northern Apennines, Italy) fails to reproduce the observed mineral compositions when the bulk Fe2O3 is determined through titration. The mismatch between observed and computed mineral compositions and assemblage is resolved by tuning the effective ferric iron content by P–XFe2O3 diagrams, obtaining equilibration conditions of 475 °C and 9–10 kbar related to a post‐compressional phase of the Alpine collision. The introduction of ferric iron affects the stability of the main rock‐forming silicates that often yield important thermobaric information. In Fe2O3‐rich compositions, garnet‐ and carpholite‐in curves shift towards higher temperatures with respect to the Fe2O3‐free systems. The presence of a ferric‐iron oxide (hematite) prevents the formation of biotite in the mineral assemblage even at temperatures approaching 550 °C. The use of P–T–XFe2O3 phase diagrams may also provide P–T information in common greenschist facies metasedimentary rocks.  相似文献   

11.
Amphibolite facies mafic rocks that consist mainly of hornblende, plagioclase and quartz may also contain combinations of chlorite, garnet, epidote, and, more unusually, staurolite, kyanite, sillimanite, cordierite and orthoamphiboles. Such assemblages can provide tighter constraints on the pressure and temperature evolution of metamorphic terranes than is usually possible from metabasites. Because of the high variance of most of the assemblages, the phase relationships in amphibolites depend on rock composition, in addition to pressure, temperature and fluid composition. The mineral equilibria in the Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O (NCFMASH) model system demonstrate that aluminium content is critical in controlling the occurrence of assemblages involving hornblende with aluminous minerals such as sillimanite, kyanite, staurolite and cordierite. Except in aluminous compositions, these assemblages are restricted to higher pressures. The iron to magnesium ratio (XFe), and to a lesser extent, sodium to calcium ratio, have important roles in determining which (if any) of the aluminous minerals occur under particular pressure–temperature conditions. Where aluminous minerals occur in amphibolites, the P–T–X dependence of their phase relationships is remarkably similar to that in metapelitic rocks. The mineral assemblages of Fe‐rich amphibolites are typically dominated by garnet‐ and staurolite‐bearing assemblages, whereas their more Mg‐rich counterparts contain chlorite and cordierite. Assemblages involving staurolite–hornblende can occur over a wide range of pressures (4–10 kbar) at temperatures of 560–650 °C; however, except in the more aluminous, iron‐rich compositions, they occupy a narrow pressure–temperature window. Thus, although their occurrence in ‘typical’ amphibolites may be indicative of relatively high pressure metamorphism, in more aluminous compositions their interpretation is less straightforward.  相似文献   

12.
The reaction muscovite+cordierite→biotite+Al2SiO5 +quartz+H2O is of considerable importance in the low pressure metamorphism of pelitic rocks: (1) its operation is implied in the widespread assemblage Ms + Crd +And± Sil + Bt + Qtz, a common mineral assemblage in contact aureoles and low pressure regional terranes; (2) it is potentially an important equilibrium for pressure estimation in low pressure assemblages lacking garnet; and (3) it has been used to distinguish between clockwise and anticlockwise P–T paths in low pressure metamorphic settings. Experiments and thermodynamic databases provide conflicting constraints on the slope and position of the reaction, with most thermodynamic databases predicting a positive slope for the reaction. Evidence from mineral assemblages and microtextures from a large number of natural prograde sequences, in particular contact aureoles, is most consistent with a negative slope (andalusite and/or sillimanite occurs upgrade of, and may show evidence for replacement of, cordierite). Mineral compositional trends as a function of grade are variable but taken as a whole are more consistent with a negative slope than a positive slope. Thermodynamic modelling of reaction 1 and associated equilibria results in a low pressure metapelitic petrogenetic grid in the system K2O–FeO–MgO–Al2O3–SiO2–H2O (KFMASH) which satisfies most of the natural and experimental constraints. Contouring of the Fe–Mg divariant interval represented by reaction 1 allows for pressure estimation in garnet‐absent andalusite+cordierite‐bearing schists and hornfelses. The revised topology of reaction 1 allows for improved analysis of P–T paths from mineral assemblage sequences and microtextures in the same rocks.  相似文献   

13.
  相似文献   

14.
Garnet pyroxenite from high pressure granulite facies occurs with different mineral assemblages which involve garnet, clinopyroxene, orthopyroxene, plagioclase, amphibole and quartz with spinel developing as symplectite with orthopyroxene and plagioclase in large cracks. Three successive parageneses have been identified. The primary assemblage is characterised by the presence of quartz. The second assemblage involves orthopyroxene–plagioclase–hornblende symplectite, and the third assemblage is characterised by the development of spinel in symplectites with orthopyroxene and plagioclase. Using THERMOCALC (V2.7), a quantitative pseudosection in the system CaO–FeO–MgO–Al2O3–SiO2–H2O has been calculated. The assemblage involving quartz developed at high pressure, while the assemblage involving spinel developed at lower pressure. The peak of metamorphism in Tin Begane was calculated at 860 °C and 13.5 kb with aH2O=0.2. These conditions are followed by a decrease of pressure down to 4.8 kb.  相似文献   

15.
A calculated petrogenetic grid for the system CaO-MgO-Al2O3-SiO2-CO2-H2O (CaMASCH), incorporating Tschermak's substitutions in amphibole, chlorite, talc and clinopyroxene, is used to examine phase relationships in aluminous marbles. A series of diagrams illustrating the effect upon stable mineral assemblages of increasing the aluminium content of a bulk composition is used to show the way aluminous minerals enter mineral assemblages in progressively more aluminous rocks. The effects of changing pressure and the incorporation of Fe into the bulk composition on the stable mineral assemblages are also examined. The calculated equilibria are shown to be in reasonable agreement with natural assemblages, and the incorporation of new experimental data on amphiboles into the existing dataset is shown to improve the agreement between observed and natural amphibole compositions.  相似文献   

16.
Chromatographic and electrochemical measurements, combined with computer simulation of the natural mineral parageneses and estimation of the stability field of muscovite-bearing assemblages, yielded a consistent model of the fluid regime for the amphibolite-facies metamorphism of the Dzhugdzhur-Stanovoy fold area (DSFA). The model allows the fluid differentiation into “internal” and “external” fluids. The “internal” fluid is formed by the volatiles of the rock, while the “external” fluid arrived from an outer source: the mantle or other reservoir. It is established that the chromatographic and electrochemical measurements refer to the “external” fluid, whereas the redox state estimated from the mineral equilibria is related to the “internal” fluid, whose composition is buffered by the equilibrium mineral assemblage. The “external” fluid trapped by rocks preserves its own redox state only at the regtrograde stage, when the solid-phase reactions slacken and the buffer role of the mineral assemblages is minimized. This aspect explains the contradiction between the wide variations in the oxidation state of the mineral equilibria (log fO2 from ?15 to ?20), on the one hand, and the persistent oxidation state of the external fluid established by the chromatographic and electrochemical methods, on the other hand. The main reason for the wide development of hornblende-bearing assemblages in the amphibolite-facies metamorphic rocks of the Dzhugdzhur-Stanovoy fold system is the high H2O pressure in the “external” fluid. According to the obtained data, the composition of the “external” fluid is determined by the conditions $ P_{H_2 O} Chromatographic and electrochemical measurements, combined with computer simulation of the natural mineral parageneses and estimation of the stability field of muscovite-bearing assemblages, yielded a consistent model of the fluid regime for the amphibolite-facies metamorphism of the Dzhugdzhur-Stanovoy fold area (DSFA). The model allows the fluid differentiation into “internal” and “external” fluids. The “internal” fluid is formed by the volatiles of the rock, while the “external” fluid arrived from an outer source: the mantle or other reservoir. It is established that the chromatographic and electrochemical measurements refer to the “external” fluid, whereas the redox state estimated from the mineral equilibria is related to the “internal” fluid, whose composition is buffered by the equilibrium mineral assemblage. The “external” fluid trapped by rocks preserves its own redox state only at the regtrograde stage, when the solid-phase reactions slacken and the buffer role of the mineral assemblages is minimized. This aspect explains the contradiction between the wide variations in the oxidation state of the mineral equilibria (log fO2 from −15 to −20), on the one hand, and the persistent oxidation state of the external fluid established by the chromatographic and electrochemical methods, on the other hand. The main reason for the wide development of hornblende-bearing assemblages in the amphibolite-facies metamorphic rocks of the Dzhugdzhur-Stanovoy fold system is the high H2O pressure in the “external” fluid. According to the obtained data, the composition of the “external” fluid is determined by the conditions ≥ 0.7 PS and = 0.01–0.3. The oxidation potential of the “external” fluid is close to that of the H2O-C system under carbon-saturated vapor conditions. Original Russian Text ? O.V. Avchenko, I.A. Aleksandrov, V.O. Khudolozhkin, M.A. Mishkin, 2009, published in Tikhookeanskaya Geologiya, 2009, Vol. 28, No. 4, pp. 3–15.  相似文献   

17.
Pseudosections calculated with thermocalc predict that lawsonite‐bearing assemblages, including lawsonite eclogite, will be common for subducted oceanic crust that experiences cool, fluid‐saturated conditions. For glaucophane–lawsonite eclogite facies conditions (500–600 °C and 18–28 kbar), MORB compositions are predicted in the NCKMnFMASHO system to contain glaucophane, garnet, omphacite, lawsonite, phengite and quartz, with chlorite at lower temperature and talc at higher temperature. In these assemblages, the pyrope content in garnet is mostly controlled by variations in temperature, and grossular content is strongly controlled by pressure. The silica content in phengite increases linearly with pressure. As the P–T conditions for these given isopleths are only subtly affected by common variations in bulk‐rock compositions, the P–T pseudosections potentially present a robust geothermobarometric method for natural glaucophane‐bearing eclogites. Thermobarometric results recovered both by isopleth and conventional approaches indicate that most natural glaucophane–lawsonite eclogites (Type‐L) and glaucophane–epidote eclogites (Type‐E) record similar peak P–T conditions within the lawsonite stability field. Decompression from conditions appropriate for lawsonite stability should result in epidote‐bearing assemblages through dehydration reactions controlled by lawsonite + omphacite = glaucophane + epidote + H2O. Lawsonite and omphacite breakdown will be accompanied by the release of a large amount of bound fluid, such that eclogite assemblages are variably recrystallized to glaucophane‐rich blueschist. Calculated pseudosections indicate that eclogite assemblages form most readily in Ca‐rich rocks and blueschist assemblages most readily in Ca‐poor rocks. This distinction in bulk‐rock composition can account for the co‐existence of low‐T eclogite and blueschist in high‐pressure terranes.  相似文献   

18.
  相似文献   

19.
Lawsonite equilibria are predicted to occur over a broad P–T spectrum developed during subduction, yet lawsonite‐bearing assemblages are rare. In the context of mafic mineral equilibria modelled for the range of common crustal metamorphism (4–23 kbar, 400–750 °C) using the system Na2O‐CaO‐K2O‐FeO‐MgO‐Al2O3‐SiO2‐H2O and the software thermocalc , unusually high water contents are demanded by lawsonite assemblages. As a consequence, lawsonite assemblages are predicted to have difficulty forming and lawsonite equilibria to be uncommon. Metabasalt undergoing cooler subduction may experience substantial periods involving the metastable persistence of mineral assemblages because of water under‐saturation with non‐occurrence of recrystallization. If formed, lawsonite‐bearing assemblages are observed to be highly unstable; their preservation requires that exhumation be accompanied by substantial cooling. The amount of structurally bound H2O in minerals plays a critical role in the formation and preservation of mineral assemblages, controlling key changes in rocks undergoing subduction.  相似文献   

20.
Chemically zoned porphyroblasts in metamorphic rocks indicate that diffusional processes could not maintain equilibrium conditions on a grain scale during porphyroblast growth or establish it afterwards. An effect of this inability to maintain equilibrium is the progressive removal of elements forming garnet cores from any metamorphic reaction that occurs at the porphyroblast boundaries or in the matrix of the rock. To examine this effect on mineral assemblages, the Bence–Albee matrix correction was applied to X‐ray intensity maps collected using eclogite samples from northern New Caledonia in order to determine the chemical composition of all parts of the sample. The manipulation of these element maps allows a quantitative analysis of the fractionation of the bulk rock composition between garnet cores and the matrix. A series of calculated equilibrium‐volume compositions represents the change in matrix chemistry with progressive elemental fractionation as a consequence of prograde garnet growth under high‐P conditions. Pressure–temperature pseudosections are calculated for these compositions, in the CaO–Na2O–FeO–MgO–Al2O3–SiO2–H2O system. Assemblages, modal proportions and mineral textures observed in the New Caledonian eclogites can be closely modelled by progressively ‘removing’ elements forming garnet cores from the bulk rock composition. The pseudosections demonstrate how chemical fractionation effects the peak metamorphic assemblage, prograde textures and the development of retrograde assemblages.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号