首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
ABSTRACT

Soil infiltration processes were evaluated under field conditions by double-ring infiltrometers with different underlying surfaces in permafrost regions of the Tibetan Plateau. The results show that initial infiltration rates, stable soil infiltration rates and cumulative soil infiltration are strongly dependent on the underlying surface types, with the highest initial and stable soil infiltration rates in the alpine desert steppe, and the lowest in alpine meadow. The effects of soil moisture and texture on infiltration processes were also assessed. Within the same underlying surfaces, the values of infiltration parameters increased with the amount of vegetation cover, while soil moisture and soil infiltration rates displayed opposing trends, with fitting slopes of ?0.03 and ?0.01 for the initial and stable soil infiltration rates, respectively. The accuracies of the five models in simulating soil infiltration rates and seven models in predicting cumulative infiltration rates were evaluated against data generated from field experiments at four sites. Based on a comparative analysis, the Horton model provided the most complete understanding of the underlying surface effects on soil infiltration processes. Altogether, these findings show that different underlying surfaces can alter soil infiltration processes. This study provides a useful reference for understanding the parameterization of land surface processes for simulating changes in hydrological processes under global warming conditions in the permafrost region on the Tibetan Plateau.  相似文献   

2.
ABSTRACT

This study presents an adaptation of the double-ring infiltrometer (DRI) device, which allows several infiltration experiments to be conducted at the same location. Hence, it becomes possible to use the DRI method to investigate infiltration behaviour under different initial soil moisture conditions. The main feature is the splitting of the inner ring into two parts. While the lower part remains in the soil throughout the investigation period, the upper part is attached to the lower one just before the infiltration experiment. This method was applied to eight test sites in an Alpine catchment, covering different land-use/cover types. The results demonstrated the applicability of the adapted system and showed correlations between total water infiltration and initial soil moisture conditions on pastures, independent of the underlying soil type. In contrast, no correlation was found at forest sites or wetlands. Thus, the study emphasizes the importance of paying special attention to the impact of initial soil moisture conditions on the infiltration—and consequently the runoff behaviour—at managed areas. Given the differences in the total infiltrated water of between 30 and 1306 mm, consideration of the interplay between initial soil moisture conditions, land-use/cover type, and soil properties in rainfall–runoff models is a prerequisite to predict runoff production accurately.
EDITOR Z.W. Kundzewicz; ASSOCIATE EDITOR not assigned  相似文献   

3.
Testing infiltrometer techniques to determine soil hydraulic properties is necessary for specific soils. For a loam soil, the water retention and hydraulic conductivity predicted by the BEST (Beerkan Estimation of Soil Transfer parameters) procedure of soil hydraulic characterization was compared with data collected by more standard laboratory and field techniques. Six infiltrometer techniques were also compared in terms of saturated soil hydraulic conductivity, Ks. BEST yielded water retention values statistically similar to those obtained in the laboratory and Ks values practically coinciding with those determined in the field with the pressure infiltrometer (PI). The unsaturated soil hydraulic conductivity measured with the tension infiltrometer (TI) was reproduced satisfactorily by BEST only close to saturation. BEST, the PI, one‐potential experiments with both the TI and the mini disk infiltrometer (MDI), the simplified falling head (SFH) technique and the bottomless bucket (BB) method yielded statistically similar estimates of Ks, differing at the most by a factor of three. Smaller values were obtained with longer and more soil‐disturbing infiltration runs. Any of the tested infiltration techniques appears usable to obtain the order of magnitude of Ks at the field site, but the BEST, BB and PI data appear more appropriate to characterize the soil at some stage during a rainfall event. Additional investigations on both similar and different soils would allow development of more general procedures to apply infiltrometer techniques for soil hydraulic characterization. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

4.
《水文科学杂志》2013,58(2):349-362
Abstract

A methodology of time-step estimation for numerically solving the Richards equation is discussed. Its importance in simulating water movement in unsaturated—saturated soils is shown for infiltration into a soil profile by applying various time-step estimations and boundary conditions for different soils. In order to test the results of the computations, infiltration theory was applied. According to infiltration theory, the pressure head in the initially unsaturated part will not take positive values as long as the moisture front has not reached the phreatic level, or, in the case of a profile with a free-draining lower boundary, it is not saturated at the base. In other cases, the appearance of positive values of the pressure head produces incorrect values for the inflow rate q.  相似文献   

5.
In this paper, the feasibility of using magnetic resonance imaging (MRI) to study water infiltration into a heterogeneous soil is examined, together with its difficulties and limitations. MRI studies of ponded water infiltration into an undisturbed soil core show that the combination of one- and two-dimensional imaging techniques provides a visual and non-destructive means of monitoring the temporal changes of soil water content and the moisture profile, and the movement of the wetting front. Two-dimensional images show air entrapment in repetitive ponded infiltration experiments. During the early stages of infiltration, one-dimensional images of soil moisture profiles clearly indicate preferential flow phenomena. The observed advance of wetting fronts can be described by a linear relationship between the square root of infiltration time (√t) and the distance of the wetting front from the soil surface. Similarly, the cumulative infiltration is also directly proportional to √t. Furthermore, from the MRI infiltration moisture profiles, it is possible to estimate the parameters that feature in infiltration equations. © 1997 by John Wiley & Sons, Ltd.  相似文献   

6.
Abstract

Advances in the traditional method of subsurface porous clay pipe irrigation rely on knowledge of the distribution of water in the soil. Knowing the relationships among the hydraulic and physical parameters in the system is important for both the design and management of the system. To simulate the infiltration from the porous clay pipe and predict the wetted zone geometry in the soil, a computer model is developed herein. Laboratory experiments were conducted on soil samples representing two different soil textures in a specially designed bin to understand the flow phenomenon and to validate the developed model. In a given soil texture, the installation depth of the pipe and the volume of water applied in the soil are the major factors affecting the wetted zone. The relationships among various parameters, namely lateral spacing, installation depth, irrigation run time, hydraulic conductivity of the body of the pipe, and hydraulic head in the system, were established using the developed model.  相似文献   

7.
Often the soil hydraulic parameters are obtained by the inversion of measured data (e.g. soil moisture, pressure head, and cumulative infiltration, etc.). However, the inverse problem in unsaturated zone is ill‐posed due to various reasons, and hence the parameters become non‐unique. The presence of multiple soil layers brings the additional complexities in the inverse modelling. The generalized likelihood uncertainty estimate (GLUE) is a useful approach to estimate the parameters and their uncertainty when dealing with soil moisture dynamics which is a highly non‐linear problem. Because the estimated parameters depend on the modelling scale, inverse modelling carried out on laboratory data and field data may provide independent estimates. The objective of this paper is to compare the parameters and their uncertainty estimated through experiments in the laboratory and in the field and to assess which of the soil hydraulic parameters are independent of the experiment. The first two layers in the field site are characterized by Loamy sand and Loamy. The mean soil moisture and pressure head at three depths are measured with an interval of half hour for a period of 1 week using the evaporation method for the laboratory experiment, whereas soil moisture at three different depths (60, 110, and 200 cm) is measured with an interval of 1 h for 2 years for the field experiment. A one‐dimensional soil moisture model on the basis of the finite difference method was used. The calibration and validation are approximately for 1 year each. The model performance was found to be good with root mean square error (RMSE) varying from 2 to 4 cm3 cm?3. It is found from the two experiments that mean and uncertainty in the saturated soil moisture (θs) and shape parameter (n) of van Genuchten equations are similar for both the soil types. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

8.
ABSTRACT

In many arid and semi-arid countries, wastewater irrigation is becoming a common practice in agriculture. In this study, the effect of long-term (40 years) wastewater irrigation on selected physical and hydraulic properties of soil in different parts of a landscape was investigated. The performance of some infiltration models, including Philip (Ph), Kostiakov (Kos), Kostiakov-Lewis (Kos-L), Horton (Ho), Huggins and Monke (Hug-M), and linear and nonlinear Smith-Parlange (S-P(L) and S-P(NL)), was compared. This study was performed in the Urmia region, Iran, where flooding wastewater irrigation has been practised for at least 40 years. Five paired sites, each of which contained a measurement location at the wastewater-irrigated (WWI) and adjacent control area were studied. Accuracy of the infiltration models was evaluated using several statistical criteria, including root mean square error (RMSE) and Akaike information criterion (AIC). The models were classified into groups using cluster analysis based on level of similarity in their performance. The cumulative water infiltration into soils after 1 h (I1h) was calculated using the selected most accurate models and introduced so as to use only one term to compare the infiltration behaviour of soils. Based on RMSE and AIC, the performance of the Ph, Ho, Kos and Kos-L models was considerably better than that of Hug-M, S-P(L) and S-P(NL). The ranking of the models in terms of their AIC values was: Kos-L > Ho > Kos > Ph > S-P(L) > Hug-M > S-P(NL). The models were classified into two distinct groups. The similarity among Ph, Ho, Kos and Kos-L models was more than 80% and for Hug-M, S-P(L), and S-P(NL) models, it was more than 79%. However, the similarity between these two groups of models was less than 58%.
Editor M.C. Acreman; Associate editor not assigned  相似文献   

9.
Animal treading can change soil physical properties, and thus is an important factor in hydrological modelling. We investigated the impacts of animal treading on infiltration by using a series of rainfall simulation experiments at Whatawhata Research Center, Waikato, New Zealand. The study identified significant variables for estimating soil steady‐state infiltration at a micro‐site (0·5 m2) and fitted the Green and Ampt equation by modifying or including variables for soil and water parameters and animal activities on grazing paddocks. A regression function for estimating steady‐state infiltration rate was created for each of four scenarios: between tracks (inter‐track), track, easy slope with ash soil, and easy slope with clay soil. Significant variables included the number of days after treading, antecedent soil moisture, field capacity, percentage of bare ground, bulk density, and the high degree of soil damage (damage not compacted). Regression models explained more than 71% of the variance in steady‐state infiltration for three scenarios, but only 53% for the easy slope with clay soil. The remodified Green and Ampt equation provided satisfactory estimation of infiltration for all scenarios (accuracy > 80%), and thus enables us to use the modified model for Waikato hill country pastures of different topography, soil physical condition, season and grazing management. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

10.
The Beerkan method based on in situ single‐ring water infiltration experiments along with the relevant specific Beerkan estimation of soil transfer parameters (BEST) algorithm is attractive for simple soil hydraulic characterization. However, the BEST algorithm may lead to erroneous or null values for the saturated hydraulic conductivity and sorptivity especially when there are only few infiltration data points under the transient flow state, either for sandy soil or soils in wet conditions. This study developed an alternative algorithm for analysis of the Beerkan infiltration experiment referred to as BEST‐generalized likelihood uncertainty estimation (GLUE). The proposed method estimates the scale parameters of van Genuchten water retention and Brooks–Corey hydraulic conductivity functions through the GLUE methodology. The GLUE method is a Bayesian Monte Carlo parameter estimation technique that makes use of a likelihood function to measure the goodness‐of‐fit between modelled and observed data. The results showed that using a combination of three different likelihood measurements based on observed transient flow, steady‐state flow and experimental steady‐state infiltration rate made the BEST‐GLUE procedure capable of performing an efficient inverse analysis of Beerkan infiltration experiments. Therefore, it is more applicable for a wider range of soils with contrasting texture, structure, and initial and saturated water content. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

11.
Abstract

A new approach was developed for estimating vertical soil water fluxes using soil water content time series data. Instead of a traditional fixed time interval, this approach utilizes the time interval between two sequential minima of the soil water storage time series to identify groundwater recharge events and calculate components of the soil water budget. We calculated water budget components: surface-water excess (Sw), infiltration less evapotranspiration (I – ET) and groundwater recharge (R) from May 2001 to January 2003 at eight locations at the USDA Agricultural Research Center, Beltsville, Maryland, USA. High uncertainty was observed for all budget components. This uncertainty was attributed to spatial and temporal variation in Sw, I – ET and R, and was caused by nonuniform rainfall distributions during recharge events, variability in the profile water content, and spatial variability in soil hydraulic properties. The proposed event-based approach allows estimating water budget components when profile water content monitoring data are available.

Citation Guber, A., Gish, T., Pachepsky, Y., McKee, L., Nicholson, T. & Cady, R. (2011) Event-based estimation of water budget components using a network of multi-sensor capacitance probes. Hydrol. Sci. J. 56(7), 1227–1241.  相似文献   

12.
ABSTRACT

The effects of topsoil addition of rice-husk dust (RHD) and cattle dung (CD), alongside surface mulching with dry grasses/legume, on the infiltration characteristics and intrinsic structural properties of a deep, well-drained soil in southeastern Nigeria are assessed. Treatments are RHD-amended, CD-amended and “unamended”, each plot being either surface-mulched or left bare, with the unamended-bare plots as control. Amendments and mulch were applied at 20 t/ha equivalents. Their effects on the soil’s infiltration characteristics 7 months later were not evident; however, there was a tendency for differences: CD-amended ≥ RHD-amended ≥ unamended and surface-mulched ≥ bare-surface. By contrast, saturated hydraulic conductivity (Ks ) differed thus: CD-mulched ≥ unamended-mulched > the rest. Similar values were recorded for Ks (50.89 cm/h) and final infiltration rate (50.74 cm/h) only under CD-amended plots, which also showed the highest values (43.50 cm/h) for transmissivity of the soil. Soil penetrometer resistance was lowest in CD-amended plots (113.44 kPa) and highest in unamended plots (166.78 kPa). Topsoil addition of cattle dung and surface mulching could increase infiltration, though marginally, and permeability of coarse-textured tropical soils beyond the season of their application when their effects on soil structure have almost waned.  相似文献   

13.
Infiltration into frozen soil plays an important role in soil freeze–thaw and snowmelt-driven hydrological processes. To better understand the complex thermal energy and water transport mechanisms involved, the influence of antecedent moisture content and macroporosity on infiltration into frozen soil was investigated. Ponded infiltration experiments on frozen macroporous and non-macroporous soil columns revealed that dry macroporous soil produced infiltration rates reaching 103 to 104 mm day−1, two to three orders of magnitude larger than dry non-macroporous soil. Results suggest that rapid infiltration and drainage were a result of preferential flow through initially air-filled macropores. Using recorded flow rates and measured macropore characteristics, calculations indicated that a combination of both saturated flow and unsaturated film flow likely occurred within macropores. Under wet conditions, regardless of the presence of macropores, infiltration was restricted by the slow thawing rate of pore ice, producing infiltration rates of 2.8 to 5.0 mm day−1. Reduced preferential flow under wet conditions was attributed to a combination of soil swelling, due to smectite-rich clay (that reduced macropore volume), and pore ice blockage within macropores. In comparison, dry soil column experiments demonstrated that macropores provided conduits for water and thermal energy to bypass the frozen matrix during infiltration, reducing thaw rates compared with non-macroporous soils. Overall, results showed the dominant control of antecedent moisture content on the initiation, timing, and magnitude of infiltration and flow in frozen macroporous soils, as well as the important role of macropore connectivity. The study provides an important data set that can aid the development of hydrological models that consider the interacting effects of soil freeze–thaw and preferential flow on snowmelt partitioning in cold regions.  相似文献   

14.
Five tracer experiments have been performed in a coarse‐textured soil near the new main airport at Gardermoen, Norway. In two lysimeter walls, 30 and 40 measuring points form the basis for spatial moment calculations. Although experiments were performed under different meteorological conditions (autumn and snowmelt) and at two different sites, the ratios of centres of vertical mass over cumulative infiltration were of the same order of magnitude, indicating a gravity‐dominated flow. Two‐dimensional transport simulations with SUTRA (Voss, 1984), with a priori estimated input parameters and random fields of soil hydraulic properties revealed a relatively good agreement with the experimental results. Three possible sources of heterogeneity affecting the vertical displacement of solute during snowmelt were identified: variability of soil physical properties, soil surface elevations and variability of ground frost during the melting period. To obtain accurate predictions, soil heterogeneity was the most important factor to characterize for the coarse‐textured soil under consideration. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

15.
The repellency index (RI) defined as the adjusted ratio between soil‐ethanol, Se, and soil‐water, Sw, sorptivities estimated from minidisk infiltrometer experiments has been used instead of the widely used water drop penetration time and molarity of ethanol drop tests to assess soil water repellency. However, sorptivity calculated by the usual early‐time infiltration equation may be overestimated as the effects of gravity and lateral capillary are neglected. With the aim to establish the best applicative procedure to assess RI, different approaches to estimate Se and Sw were compared that make use of both the early‐time infiltration equation (namely, the 1 min, S1, and the short‐time linearization approaches), and the two‐term axisymmetric infiltration equation, valid for early to intermediate times (namely, the cumulative linearization and differentiated linearization approaches). The dataset included 85 minidisk infiltrometer tests conducted in three sites in Italy and Spain under different vegetation habitats (forest of Pinus pinaster and Pinus halepensis, burned pine forest, and annual grasses), soil horizons (organic and mineral), postfire treatments, and initial soil water contents. The S1 approach was inapplicable in 42% of experiments as water infiltration did not start in the first minute. The short‐time linearization approach yielded a systematic overestimation of Se and Sw that resulted in an overestimation of RI by a factor of 1.57 and 1.23 as compared with the cumulative linearization and differentiated linearization approaches. A new repellency index, RIs, was proposed as the ratio between the slopes of the linearized data for the wettable and hydrophobic stages obtained by a single water infiltration test. For the experimental conditions considered, RIs was significantly correlated with RI and WDPT. Compared with RI, RIs includes information on both soil sorptivity and hydraulic conductivity and, therefore, it can be considered more physically linked to the hydrological processes affected by soil water repellency.  相似文献   

16.
Abstract

A physically-based hillslope hydrological model with shallow overland flow and rapid subsurface stormflow components was developed and calibrated using field experiments conducted on a preferential path nested hillslope in northeast India. Virtual experiments were carried out to perform sensitivity analysis of the model using the automated parameter estimation (PEST) algorithm. Different physical parameters of the model were varied to study the resulting effects on overland flow and subsurface stormflow responses from the theoretical hillslopes. It was observed that topographical shapes had significant effects on overland flow hydrographs. The slope profiles, surface storage, relief, rainfall intensity and infiltration rates primarily controlled the overland flow response of the hillslopes. Prompt subsurface stormflow responses were mainly dominated by lateral preferential flow, as soil matrix flow rates were very slow. Rainfall intensity and soil macropore structures were the most influential parameters on subsurface stormflow. The number of connected soil macropores was a more sensitive parameter than the size of macropores. In hillslopes with highly active vertical and lateral preferential pathways, saturation excess overland flow was not evident. However, saturation excess overland flow was generated if the lateral macropores were disconnected. Under such conditions, rainfall intensity, duration and preferential flow rate governed the process of saturation excess overland flow generation from hillslopes.
Editor D. Koutsoyiannis; Associate editor C. Perrin  相似文献   

17.
Abstract

The accuracy of six combined methods formed by three commonly-used soil hydraulic functions and two methods to determine soil hydraulic parameters based on a soil hydraulic parameter look-up table and soil pedotransfer functions was examined for simulating soil moisture. A novel data analysis and modelling approach was used that eliminated the effects of evapotranspiration so that specific sources of error among the six combined methods could be identified and quantified. By comparing simulated and observed soil moisture at six sites of the USDA Soil Climate Analysis Network, we identified the optimal soil hydraulic functions and parameters for predicting soil moisture. Through sensitivity tests, we also showed that adjusting only the soil saturated hydraulic conductivity, Ks , is insufficient for representing important effects of macropores on soil hydraulic conductivity. Our analysis illustrates that, in general, soil hydraulic conductivity is less sensitive to Ks than to the soil pore-size distribution parameter.

Editor D. Koutsoyiannis; Associate editor D. Hughes

Citation Pan, F., McKane, R.B. and Stieglitz, M., 2012. Identification of optimal soil hydraulic functions and parameters for predicting soil moisture. Hydrological Sciences Journal, 57 (4), 723–737.  相似文献   

18.
Abstract

Guidelines of effective soil hydraulic parameters were developed to be applicable in simulating average infiltration and subsequent moisture redistribution over a large-scale heterogeneous field. Average large-scale infiltration and redistribution in heterogeneous soils were quantified through multiple simulations of local-scale processes. The effective hydraulic parameters were derived to simulate the average amount of infiltrating water, and to capture the subsequent surface soil moisture redistribution averaged over the large heterogeneous landscape. The results demonstrated that the effective hydraulic parameters typically exhibited a step change from infiltration to redistribution, with the size of the step change being related to the degree of hydraulic parameter heterogeneity and the correlations among the hydraulic parameters. However, the effective hydraulic parameters did not change significantly over time for the moisture redistribution. It was further demonstrated that the size of the step change was smallest for effective saturated hydraulic conductivity.

Editor Z.W. Kundzewicz; Associate editor Y. Guttman

Citation Zhu, J.T. and Sun, D.M., 2012. Soil hydraulic properties for moisture redistribution in a large-scale heterogeneous landscape. Hydrological Sciences Journal, 57 (6), 1196–1206.  相似文献   

19.
Soil hydrology was investigated in the Guadelperalón experimental watershed in order to determine the influence of land use and vegetation cover on runoff and infiltration within the Dehesa land system. Five soil–vegetation units were selected: (1) tree cover, (2) sheep trials, (3) shrub cover, (4) hillslope grass and (5) bottom grass. The results of the simulated rainfall experiments performed at an intensity of 56·6 mm h−1 during one hour on plots of 0·25 m2, and the water drop penetration time test indicate the importance of water repellency in the Dehesa land system under drought conditions. Low infiltration rates (c. 9–44 mm h−1) were found everywhere except at shrub sites and in areas with low grazing pressure. Soil water repellency greatly reduced infiltration, especially beneath Quercus ilex canopies, where fast ponding and greater runoff rates were observed. The low vegetation cover as a consequence of a prolonged drought and grazing pressure, in conjunction with the soil water repellency, induces high runoff rates (15–70 per cent). In spite of this, macropore fluxes were found in different locations, beneath trees, on shrub-covered surfaces, as well as at sites with a dominance of herbaceous cover. Discontinuity of the runoff fluxes due to variations in hydrophobicity causes preferential flows and as a consequence deeper infiltration, especially where macropores are developed. © 1998 John Wiley & Sons, Ltd.  相似文献   

20.
Abstract

By sprinkling an experimental plot with different intensities of simulated rainfall starting with different initial conditions of soil moisture, the variations of infiltration capacity and consequently the response of the soil surface to runoff are evaluated. The following values are successively determined from experimental data: the mean depth of surface storage; the mean depth of detention and the parameters of a chosen infiltration formula.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号