首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Our objective is to understand general causes of different river channel patterns. In this paper we compare an empirical stream power‐based classification and a physics‐based bar pattern predictor. We present a careful selection of data from the literature that contains rivers with discharge and median bed particle size ranging over several orders of magnitude with various channel patterns and bar types, but no obvious eroding or aggrading tendency. Empirically a continuum is found for increasing specific stream power, here calculated with pattern‐independent variables: mean annual flood, valley gradient and channel width predicted with a hydraulic geometry relation. ‘Thresholds’, above which certain patterns emerge, were identified as a function of bed sediment size. Bar theory predicts nature and presence of bars and bar mode, here converted to active braiding index (Bi). The most important variables are actual width–depth ratio and nonlinearity of bed sediment transport. Results agree reasonably well with data. Empirical predictions are somewhat better than bar theory predictions, because the bank strength is indirectly included in the empirical prediction. In combination, empirical and theoretical prediction provide partial explanations for bar and channel patterns. Increasing potential‐specific stream power implies more energy to erode banks and indeed correlates to channels with high width–depth ratio. Bar theory predicts that such rivers develop more bars across the width (higher Bi). At the transition from meandering to braiding, weakly braided rivers and meandering rivers with chutes are found. Rivers with extremely low stream power and width–depth ratios hardly develop bars or dynamic meandering and may be straight or sinuous or, in case of disequilibrium sediment feed, anastomosing. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

2.
A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

3.
An extensive survey and topographic analysis of five watersheds draining the Luquillo Mountains in north‐eastern Puerto Rico was conducted to decouple the relative influences of lithologic and hydraulic forces in shaping the morphology of tropical montane stream channels. The Luquillo Mountains are a steep landscape composed of volcaniclastic and igneous rocks that exert a localized lithologic influence on the stream channels. However, the stream channels also experience strong hydraulic forcing due to high unit discharge in the humid rainforest environment. GIS‐based topographic analysis was used to examine channel profiles, and survey data were used to analyze downstream changes in channel geometry, grain sizes, stream power, and shear stresses. Results indicate that the longitudinal profiles are generally well graded but have concavities that reflect the influence of multiple rock types and colluvial‐alluvial transitions. Non‐fluvial processes, such as landslides, deliver coarse boulder‐sized sediment to the channels and may locally determine channel gradient and geometry. Median grain size is strongly related to drainage area and slope, and coarsens in the headwaters before fining in the downstream reaches; a pattern associated with a mid‐basin transition between colluvial and fluvial processes. Downstream hydraulic geometry relationships between discharge, width and velocity (although not depth) are well developed for all watersheds. Stream power displays a mid‐basin maximum in all basins, although the ratio of stream power to coarse grain size (indicative of hydraulic forcing) increases downstream. Excess dimensionless shear stress at bankfull flow wavers around the threshold for sediment mobility of the median grain size, and does not vary systematically with bankfull discharge; a common characteristic in self‐forming ‘threshold’ alluvial channels. The results suggest that although there is apparent bedrock and lithologic control on local reach‐scale channel morphology, strong fluvial forces acting over time have been sufficient to override boundary resistance and give rise to systematic basin‐scale patterns. Copyright © 2010 John Wiley and Sons, Ltd.  相似文献   

4.
The suspended sediment concentration response of three small streams draining quartzites and quartz-schists in southwestern Nigeria to storms of varying magnitude are presented. A total of 1468 water samples from 62 storm responses with peak stream discharge values ranging from 80 to 120 l s?2 were analysed and storm and suspended sediment concentration hydrographs and hysteresis loops were used to depict the response patterns. The six different types of responses identified include the single and multiple discharge peak rises with sediment lead and lag and also the mixed response patterns. Both valley slope and channel erosion constituted important sources of suspended sediment. However, sediment availability, exhaustion, and flushing effects determined the variation in the different response types.  相似文献   

5.
Pristine river corridors were characterized by island and floodplain development driven by the inter‐play of flows, sediments and woody vegetation. Here we explore these relationships within topographically controlled settings within the upper, middle and lower reaches of a large, semi‐natural alpine to mediterranean river. These reaches have expanding or contracting valley floors within which we show that there are more or less predictable patterns of stream power and rates of vegetation growth, reflecting water availability during dry periods and also the availability of sand and finer sediment. We relate these to the pattern of island distribution that is repeated within the three reaches and is indicative of the engineering role of riparian trees. Islands are shown to develop within thresholds defined by stream power, rates of woody vegetation growth and rates of sedimentation, and to develop most quickly where riparian species include those capable of sprouting from driftwood. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

6.
River classifications provide useful frameworks to understand complex fluvial landscapes and to manage freshwater ecosystems. Alluvial floodplains for rivers in low‐relief glacially conditioned catchments of southern Ontario (Canada) are classified and tested using a sequence of multivariate statistical analyses. An original dataset of 109 floodplain sites is investigated using k‐means clustering, principal component analysis, and discriminant analysis statistical approaches. Four primary floodplain types are proposed representing basic morphological, stratigraphical, and sedimentological characteristics. Classifications are successfully discriminated by two principal dimensions: (1) stream power‐resistance; and (2) floodplain sedimentology. The latter is most efficiently represented by the availability of alluvial sand, and specifically a new variable defined as floodplain sand equivalent (FSE). Floodplain types are generally consistent with previous river classifications, however the glacial legacy requires refined classifications which account for inherited cobble bed materials and patterns of sand supply. Representing the residual variability of stream power‐resistance correlations, a third explanatory dimension of sediment transport is suggested, and may explain some within‐class variability in channel morphology. Balancing the opposing concepts of fluvial process domains and landform continuums, the potential for transitional floodplain types is also explored. The proposed first‐order alluvial floodplain classifications provide a basis from which to further investigate geomorphological diversity within the context of complex glacial legacy effects in low‐relief settings. Future research to reveal the spatial arrangement and linkages of distinct morphological groups within a regional landscape mosaic is expected to provide insights into patterns of post‐glacial fluvial adjustment. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

7.
A continuous record reveals that the incidence of bedload in a coarse-grained river channel changes from flood to flood. Long periods of inactivity encourage the channel bed to consolidate sufficiently so that bedload is largely confined to the recession limb of the next flood-wave. But when floods follow each other closely, the bed material is comparatively loose and offers less resistance to entrainment. In this case, substantial amounts of bedload are generated on the rising limb. This is confirmed by values of bed shear stress or stream power at the threshold of initial motion which can be up to five times the overall mean in the case of isolated floods or those which are the first of the season. This produces a complicated relationship between flow parameters and bedload and explains some of the difficulties in establishing bedload rating curves for coarse-grained channels. Besides this, the threshold of initial motion is shown to occur at levels of bed shear stress three times those at the thresholds of final motion. This adds further confusion to attempts at developing predictive bedload equations and clearly indicates at least one reason why equations currently in use are unsatisfactory. Bedload is shown to be characterized by a series of pulses with a mean periodicity of 1.7 hours. In the absence of migrating bedforms, it is speculated that this well-documented pattern reflects the passage of kinematic waves of particles in a slow-moving traction carpet. The general pattern of bedload, including pulsations, is shown to occur more or less synchronously at different points across the stream channel.  相似文献   

8.
The effects of variations of drainage basin morphometry and relief characteristics on flood peak magnitude and time-to-peak are investigated using simulated stream networks. The networks are produced by three models: headward growth, systematic capture, and minimum power relaxation. Translational and kinematic wave flood routing were used to generate synthetic hydrographs. Peak discharge and time-to-peak are predictable to a high degree by five different sets of morphometric-relief parameters. In order of decreasing order of importance in predictive ability the parameters characterize basin size, relative relief, basin concavity, and basin shape. Both simulated and natural stream networks exhibit strong dependence of planimetric morphometry upon basin concavity. The effect of this dependency is to increase the effect of basin concavity upon flood hydrographs.  相似文献   

9.
The morphological active width, defined as the lateral extent of bed material displacement over time, is a fundamental parameter in multi‐threaded gravel‐bed rivers, linking complex channel dynamics to bedload transport. Here, results are presented from five constant discharge experiments, and three event hydrographs, covering a range of flow strengths and channel configurations for which morphological change, bedload transport rates, and stream power were measured in a physical model. Changes in channel morphology were determined via differencing of photogrammetrically‐derived digital elevation models (DEMs) of the model surface generated at regular intervals over the course of ~115 h of experimental runs. Independent measures of total bedload output were made using downstream sediment baskets. Results indicate that the morphological active width increases with total and dimensionless stream power and is strongly and positively correlated with bulk change (total volume of bed material displaced over time) and active braiding intensity (ABI). Although there is considerable scatter due to the inherent variability in braided river morphodynamics, the active width is positively correlated with independent measurements of bedload transport rate. Active width, bulk change, and bedload transport rates were all negligible below a dimensionless stream power threshold value of ~ 0.09, above which all increase with flow strength. Therefore, the active width could be used as a general predictor of bulk change and bedload transport rates, which in turn could be approximated from total and dimensionless stream power or ABI in gravel‐bed braided rivers. Furthermore, results highlight the importance of the active width, rather than the morphological active depth, in predicting volumes of change and bedload transport rates. The results contribute to the larger goals of better understanding braided river morphodynamics, creating large high‐resolution datasets of channel change for model calibration and validation, and developing morphological methods for predicting bedload transport rates in braiding river systems. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

10.
Dominant discharge may be defined as that discharge which transports most bed sediment in a stream that is close to steady-state conditions. The concept is examined in relation to two single thread gravel-bedded streams. One stream is alluvial and free to adjust its geometry whilst in the other, channel capacity and form are partially constrained by cohesive till-banks and a heavily compacted bed. The total quantity of bedload and its calibre were measured for every flood over a six year period, so that the relationship between the grain-size of bedload and the most effective discharge could be examined in the context of thresholds for channel change. The dominant discharge concept was applicable to the alluvial stream in that the bankfull value is an effective discharge for maintaining channel capacity. The concept applied less well to the ‘non-alluvial’ stream. Although in both streams the bankfull value was exceeded for less than 0.34 per cent of the time, overbank flows are important in instigating channel change. It is only during overbank flows that the largest bed material is entrained in quantity. For within-channel flows a threshold separates flows which winnow fine matrix from those which entrain the finer bed gravels. This threshold occurred at 60 per cent bankfull. It was concluded that the dominant discharge concept can be applied to streams close to steady-state which are alluvial, competent, and free to adjust their boundaries. An important proviso is that two channel-stability domains can be recognized. These domains represent channel maintenance and channel adjustment and are defined by intrinsic thresholds in the bed material entrainment function.  相似文献   

11.
ABSTRACT

The concept of dominant (stream) discharge in geomorphology has not been firmly defined. By defining it, on rational grounds, as that discharge at which, over a long period of time, most sediment has been transported, a definite value can be computed for a stream for which there are available duration-curve values of daily discharge and a sediment-rating curve. This has been done for 5 eastern and 4 western rivers. The dominant discharge, when expressed in terms of percentage duration, is remarkably consistent, and is found to be a lower discharge than has generally been considered as dominant.  相似文献   

12.
Previous studies of alluvial rivers have shown that channel patterns form a continuum controlled by interactions among factors such as gradient, discharge, sediment size, and bank strength. Data from channels in the permanent wetlands of the Okavango Delta add to these ?ndings by focusing on pattern transitions in channels with banks formed by sedges and grasses that are rooted in peat and underlain by unconsolidated sediment. Channels are well de?ned, and transport ?ne–medium sand as bedload between the vertical, vegetation‐lined banks. Water depths, velocities, grain sizes, and bankline vegetation do not vary signi?cantly or systematically downstream, but the permeable banks allow water to leak from the channels, contributing to an overall downstream decrease in discharge and width. In addition, as the Okavango River ?ows from the <12 km wide ‘Panhandle’ and splits into distributaries in the broader ‘Fan’, valley gradient steepens by c. 60 per cent. These downstream changes result in channel pattern adjustments. In the Panhandle, the Okavango River is a relatively wide (c. 30–100 m), actively meandering, sinuous channel (P > 2·0), but further downstream in the Fan, the narrower (<40 m) distributaries follow laterally stable, less sinuous (‘straight’) courses (P < 1·75). Some channel pattern discrimination diagrams based on simple indices of gradient, discharge, sediment size or stream power are inadequate for analysing the meandering–straight transition in the Okavango but Parker's (1976) approach, based on ratios of depth–width and slope–Froude number, accurately characterizes the transition. Our ?eld observations, combined with the results from previous experimental studies, suggest that in relatively wide channels (w/d > 10), thalweg meandering results in scour of the unconsolidated sediment at the bank base, leading to undermining and collapse of the vegetation, and to slow meander migration. However, as channels narrow downstream (w/d < 10) with discharge losses, proportionally increasing sidewall drag exerted by bankline vegetation suppresses thalweg meandering and bank scour, and channels follow stable, less sinuous courses. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

13.
Stream power can be an extremely useful index of fluvial sediment transport, channel pattern, river channel erosion and riparian habitat development. However, most previous studies of downstream changes in stream power have relied on field measurements at selected cross‐sections, which are time consuming, and typically based on limited data, which cannot fully represent important spatial variations in stream power. We present here, therefore, a novel methodology we call CAFES (combined automated flood, elevation and stream power), to quantify downstream change in river flood power, based on integrating in a GIS framework Flood Estimation Handbook systems with the 5 m grid NEXTMap Britain digital elevation model derived from IFSAR (interferometric synthetic aperture radar). This provides a useful modelling platform to quantify at unprecedented resolution longitudinal distributions of flood discharge, elevation, floodplain slope and flood power at reach and basin scales. Values can be resolved to a 50 m grid. CAFES approaches have distinct advantages over current methodologies for reach‐ and basin‐scale stream power assessments and therefore for the interpretation and prediction of fluvial processes. The methodology has significant international applicability for understanding basin‐scale hydraulics, sediment transport, erosion and sedimentation processes and river basin management. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

14.
Automatic and continuously recording samplers are deployed in a Hertfordshire gravel-bed stream to show that bedload transport is related to stream power. The pattern is similar to that already established for North American channels but, because the record is so detailed, it is possible to identify the cause of the considerable scatter that is normal in such relationships. A major factor is the occurrence of rhythmic pulses in bedload discharge that are not matched by similar fluctuations in hydraulic variables. It is suggested that these pulses reflect downstream differences in the concentration of mobile particles in a slow-moving traction carpet, and that they may be likened to kinematic waves. The record also reveals that the threshold of sediment transport—always presumed hithero to be associated with incipient motion—is related to the cessation of bedload transport in a river flood. Indeed, the mean value of stream power at the finish of bedload transport is only 20 percent of that prevailing at the moment of incipient sediment motion. Because of this, there is an inevitably poor correlation between actual bedload transport rates and those predicted by bedload equations which rely upon a single traction threshold. These new data show that the general inverse relationship between bedload discharge and water-depth : grain-size ratio proposed by Bagnold (1977, 1980) is not universal. Transport efficiency for this gravel-bed stream is typically 0.05 per cent of available stream power, which compares with 1.6 per cent for a river moving both gravel and sand, and 5 per cent for another channel where bedload is composed predominantly of sand-sized particles. It is argued that coarse and fine-grained alluvial channels may need to be considered separately. By allowing for differences in traction threshold at the beginning and end of bedload events, and by averaging bedload discharge flood by flood in order to smooth out the effect of pulses, it is possible to achieve a reasonably good prediction of average bedload transport rate in terms of stream power.  相似文献   

15.
Bed load transport rate was measured in ten self-formed small-scale gravel braided streams developed in a laboratory flume at several different values of steady discharge and flume gradient. The streams are approximate Froude models of typical prototype braided streams but of no particular river. Slight viscous effects may be present in the models because particle Reynolds numbers are close to 70. Total bed load discharge was measured every fifteen minutes throughout each 60 hour run. In addition, 80 channel cross-sections were measured in each run to establish the average channel geometry. Total bed load transport rate correlates well with total discharge and total stream power, although at a given stream power bed load discharge is greater when braiding is less intense and the width/depth ratio is lower. Analysis using unit stream power and cross-section average bed shear stress reveals that the laboratory data conform to existing empirical bed load transport relationships. However, comparison with field data from gravel-bed rivers shows discrepancies that may be due to differences in bed material size gradation and bed sediment structure. At constant discharge, wide fluctuations in bed load discharge occur with some regularity. Periods range from 2 to 10 hours in the models, which is equivalent to several tens of hours in a prototype. The presence of these long-period fluctuations compounds the problems of field measurement of bed load in braided streams.  相似文献   

16.
This paper compares hydrologic records and geomorphic effects of several historic floods in the central Appalachian region of the eastern United States. The most recent of these, occurring in November 1985, was the largest ever recorded in West Virginia, with peak discharges exceeding the estimated 500-year discharge at eight of eleven stations in the South Branch Potomac River and Cheat River basins. Geomorphic effects on valley floors included some of the most severe and widespread floodplain erosion ever documented and exceeded anything seen in previous floods, even though comparable or greater rainfall and unit discharge have been observed several times in the region over the past 50 years. Comparison of discharge-drainage area plots suggests that the intensity and spatial scale of the November 1985 flood were optimal for erosion of valley floors along the three forks of the South Branch Potomac River. However, when a larger geographic area is considered, rainfall totals and discharge-drainage area relationships are insufficient predictors of geomorphic effectiveness for valley floors at drainage areas of 250 to 2500 km2. Unit stream power was calculated for the largest recorded flood discharge at 46 stations in the central Appalachians. Maximum values of unit stream power are developed in bedrock canyons, where the boundaries are resistant to erosion and the flow cross-section cannot adjust its width to accommodate extreme discharges. The largest value was 2570 W m?2; record discharge at most stations was associated with unit stream power values less than 300 W m?2, but more stations exceeded this value in the November 1985 flood than in the other floods that were analysed. Unit stream power at indirect discharge measurement sites near areas experiencing severe erosion in this and other central Appalachian floods generally exceeded 300 W m?2; reach-average values of 200-500 W m?2 were calculated for valleys where erosion damage was most widespread. Despite these general trends, unit stream power is not a reliable predictor of geomorphic change for individual sites. Improved understanding of flood impacts will require more detailed investigation of interactions between local site characteristics and patterns of flood flow over the valley floor.  相似文献   

17.
Rivers respond to environmental changes such as climate shifts, land use changes and the construction of hydro‐power dams in a variety of ways. Often there are multiple potential responses to any given change. Traditionally, potential stream channel response has been assessed using simple, qualitative frameworks based largely on professional judgement and field experience, or using some form of regime theory. Regime theory represents an attempt to use a physically based approach to predict the configuration of stable channels that can transport the imposed sediment supply with the available discharge. We review the development of regime theory, and then present a specific regime model that we have created as a stand‐alone computer program, called the UBC Regime Model (UBCRM). UBCRM differs from other regime models in that it constrains its predictions using a bank stability criterion, as well as a pattern stability criterion; it predicts both the stable channel cross‐sectional dimensions as well as the number of anabranches that the stream must have in order to establish a stable channel pattern. UBCRM also differs from other models in that it can be used in a stochastic modelling mode that translates uncertainty in the input variables into uncertainty in the predicted channel characteristics. However, since regime models are fundamentally based on the concept of grade, there are circumstances in which the model does not perform well. We explore the strengths and weaknesses of the UBCRM in this paper, and we attempt to illustrate how the UBCRM can be used to augment the existing qualitative frameworks, and to help guide professionals in their assessments. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

18.
This paper, the first of two, hypothesizes that: (1) the temporal variation of stream power of a river channel at a given station with varying discharge is accomplished by the temporal variation in channel form (flow depth and channel width) and hydraulic variables, including energy slope, flow velocity and friction; (2) the change in stream power is distributed among the changes in flow depth, channel width, flow velocity, slope, and friction, depending on the boundary conditions that the channels has to satisfy. The second hypothesis is a result of the principle of maximum entropy and the theory of minimum energy dissipation or its simplified minimum stream power. These two hypotheses lead to families of at‐a‐station hydraulic geometry relations. The conditions under which these families of relations can occur in the field are discussed. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

19.
Temporal scaling in stream discharge and hydraulic heads in riparian wells was evaluated to determine the feasibility of using spectral analysis to identify potential surface and groundwater interaction. In floodplains where groundwater levels respond rapidly to precipitation recharge, potential interaction is established if the hydraulic head (h) spectrum of riparian groundwater has a power spectral density similar to stream discharge (Q), exhibiting a characteristic breakpoint between high and low frequencies. At a field site in Walnut Creek watershed in central Iowa, spectral analysis of h in wells located 1 m from the channel edge showed a breakpoint in scaling very similar to the spectrum of Q (～20 h), whereas h in wells located 20 and 40 m from the channel showed temporal scaling from 1 to 10,000 h without a well-defined breakpoint. The spectral exponent (β) in the riparian zone decreased systematically from the channel into the floodplain as groundwater levels were increasingly dominated by white noise groundwater recharge. The scaling pattern of hydraulic head was not affected by land cover type, although the number of analyses was limited and site conditions were variable among sites. Spectral analysis would not replace quantitative tracer or modeling studies, but the method may provide a simple means of confirming potential interaction at some sites.  相似文献   

20.
We have shown in a previous paper that many of the main features of braided streams can be captured in a relatively simple cellular computer model. Here we examine some of the detailed characteristics of this model. We show the qualitative form of the braiding produced by the model is generally insensitive to changes in most of the numerical parameters used in the model. The most crucial parameter choice is the use of a non-linear exponent (>1) to describe the relation between sediment flux and local stream power. Use of water discharge instead of stream power to parameterize sediment flux produces braiding, but also unrealistically high-amplitude topography variations in the long term. Introduction of a threshold transport condition causes no noticeable change in the model's behaviour. Inclusion of lateral sediment transport due to gravitational effects on lateral slopes is not crucial to produce braiding, but is needed to provide reasonable lateral channel shifting, and to maintain a continuing dynamic behaviour. As long as lateral sediment transport is included, altering the initial topography for a run has no effect, other than a transient period of regrading. In addition, we show that there is a simple and apparently fundamental connection between braided-stream channel networks and erosional (dendritic) networks that has not been previously recognized. All that is needed to switch the model from braided to dendritic patterns is either to remove redeposition from the rules, simulating entrainment of cohesive sediment, or to add a cliff to the initial topography, making local redeposition unimportant. This result suggests that the presence or absence of significant local redeposition, which causes bar formation, channel division, and avulsion, determines whether a braided or dendritic pattern will form. © 1997 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号