共查询到20条相似文献，搜索用时 609 毫秒
1.
2.
Hyperplasticity theory was developed by Collins and Houlsby (Proc. Roy. Soc. Lon. A 1997; 453 :1975–2001) and Houlsby and Puzrin (Int. J. Plasticity 2000; 16 (9):1017–1047). Further research has extended the method to continuous hyperplasticity, in which smooth transitions between elastic and plastic behaviour can be modelled. This paper illustrates a development of a new constitutive model for soils using hyperplasticity theory. The research begins with a simple one‐dimensional elasticity model. This is extended in stages to an elasto‐plastic model with a continuous internal function. The research aims to develop a soil model, which addresses some of the shortcomings of the modified cam‐clay model, specifically the fact that it cannot model small strain stiffness, or the effects of immediate stress history. All expressions used are consistent with critical state soil mechanics terminology. Finally, a numerical implementation of the model using a rate‐dependent algorithm is described. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
3.
M. F. Bransby 《国际地质力学数值与分析法杂志》1999,23(15):1909-1926
Two-dimensional finite element analysis has been used to find load–transfer relationships for translation of an infinitely long pile through undrained soil for a variety of soil-constitutive models. It has been shown that these load–transfer curves can be used as p–y curves in the analysis of single piles undergoing lateral pile head loading in undrained soils with non-linear stress–strain laws. Lateral pile response deduced from 2-D analysis input to the subgrade reaction method has been compared to the behaviour of a single pile analysed using three-dimensional finite element analysis. Good agreement between the two methods for non-linear soils suggests that the 2-D analysis may form a useful design method for calculation of p–y curves. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
4.
Recognition of non‐linear constitutive rock/soil model from experimental results is often multi‐modal in the large parameter space. A genetic evolution algorithm is thus proposed for its recognition, including that of structure of the model and coefficients in the model. The structure of the model can be firstly determined according to mechanical mechanism if the mechanism is clearly understood or searched by using evolutionary algorithm. The coefficients to be determined are then searched in global optional space. With the new evolutionary algorithm, the non‐linear stress–strain–time constitutive law to describe strain softening behaviours of diatomaceous soil under consolidated and undrained state was recognized by learning stress–strain–time behaviour of an intact sample under consolidated pressure of σc=0.1 MPa and strain velocity ofa=0.175%/min. This model gave reasonable prediction for diatomaceous soils under varying consolidated pressures (0.1–3.5 MPa) and strain velocities (0.0044–1.75%/min). It indicates that the methodology proposed in this paper is robust enough and strongly attractive for recognition of non‐linear constitutive model of soil and rock materials. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
5.
Most existing hydromechanical models for unsaturated soils are not able to fully capture the nonlinearity of stress–strain curves at small strains (less than 1%). They cannot therefore, for example, accurately predict ground movements and the performance of many earth structures under working conditions. To tackle this problem, a state‐dependent bounding surface plasticity model has been newly developed. Particularly, the degradation of shear modulus with strain at small strains ranging from 0.001% to 1% is focused. The proposed model is formulated in terms of mean average skeleton stress, deviator stress, suction, specific volume and degree of saturation. Void ratio‐dependent hydraulic hysteresis is coupled with the stress–strain behaviour. Different from other elastoplastic models for unsaturated soils, plastic strains are allowed inside bounding surfaces. In this paper, details of model formulations and calibration procedures of model parameters are presented. To evaluate the capability of the new model, it is applied to simulate a series of triaxial compression tests on compacted unsaturated silt at various suctions. Effects of suction, drying and wetting as well as net stress on unsaturated soil behaviour are well captured. The model shows good predictions of the degradation of shear modulus with strain over a wide range of strains from 0.001% to 1%. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
6.
This paper presents a new generalized effective stress model, referred to as MIT-S1, which is capable of predicting the rate independent, effective stress–strain–strength behaviour of uncemented soils over a wide range of confining pressures and densities. Freshly deposited sand specimens compressed from different initial formation densities approach a unique condition at high stress levels, referred to as the limiting compression curve (LCC), which is linear in a double logarithmic void ratio, e, mean effective stress space, p′. The model describes irrecoverable, plastic strains which develop throughout first loading using a simple four-parameter elasto-plastic model. The shear stiffness and strength properties of sands in the LCC regime can be normalized by the effective confining pressure and hence can be unified qualitatively, with the well-known behaviour of clays that are normally consolidated from a slurry condition along the virgin consolidation line (VCL). At lower confining pressures, the model characterizes the effects of formation density and fabric on the shear behaviour of sands through a number of key features: (a) void ratio is treated as a separate state variable in the incrementally linearized elasto-plastic formulation: (b) kinematic hardening describing the evolution of anisotropic stress–strain properties: (c) an aperture hardening function controls dilation as a function of ‘formation density’; and (d) the use of a single lemniscate-shaped yield surface with non-associated flow. These features enable the model to describe characteristic transitions from dilative to contractive shear response of sands as the confining pressure increases. This paper summarizes the procedures used to select input parameters for clays and sands, while a companion paper compares model predictions with measured data to illustrate the model capability for describing the shear behaviour of clays and sands. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
7.
The yield vertex non‐coaxial theory is implemented into a critical state soil model, CASM (Int. J. Numer. Anal. Meth. Geomech. 1998; 22 :621–653) to investigate the non‐coaxial influences on the stress–strain simulations of real soil behaviour in the presence of principal stress rotations. The CASM is a unified clay and sand model, developed based on the soil critical state concept and the state parameter concept. Without loss of simplicity, it is capable of simulating the behaviour of sands and clays within a wide range of densities. The non‐coaxial CASM is employed to simulate the simple shear responses of Erksak sand and Weald clay under different densities and initial stress states. Dependence of the soil behaviour on the Lode angle and different plastic flow rules in the deviatoric plane are also considered in the study of non‐coaxial influences. All the predictions indicate that the use of the non‐coaxial model makes the orientations of the principal stress and the principal strain rate different during the early stage of shearing, and they approach the same ultimate values with an increase in loading. These ultimate orientations are dependent on the density of soils, and independent of their initial stress states. The use of the non‐coaxial model also softens the shear stress evolutions, compared with the coaxial model. It is also found that the ultimate shear strengths by using the coaxial and non‐coaxial models are dependent on the plastic flow rules in the deviatoric plane. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
8.
Wei Dong Guo 《国际地质力学数值与分析法杂志》2000,24(2):135-163
Viscoelastic or creep behaviour can have a significant influence on the load transfer (t–z) response at the pile–soil interface, and thus on the pile load settlement relationship. Many experimental and theoretical models for pile load transfer behaviour have been presented. However, none of these has led to a closed‐form expression which captures both non‐linearity and viscoelastic behaviour of the soil. In this paper, non‐linear viscoelastic shaft and base load transfer (t–z) models are presented, based on integration of a generalized viscoelastic stress–strain model for the soil. The resulting shaft model is verified through published field and laboratory test data. With these models, the previous closed‐form solutions evolved for a pile in a non‐homogeneous media have been readily extended to account for visco‐elastic response. For 1‐step loading case, the closed‐form predictions have been verified extensively with previous more rigorous numerical analysis, and with the new GASPILE program analysis. Parametric studies on two kinds of commonly encountered loading: step loading, ramp (linear increase followed by sustained) loading have been performed. Two examples of the prediction of the effects of creep on the load settlement relationship by the solutions and the program GASPILE, have been presented. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
9.
The implications of assuming isotropic elasto–plasticity to model the behaviour of soil under simple shear conditions are considered. For small strains, use of such a model implies the following three consequences: (1) strains and strain increments at any stage of shearing may be expressed as the sum of elastic and plastic components; (2) principal directions of stress and of plastic strain increment are collinear; (3) principal directions of stress increment and of elastic strain increment are collinear. These consequences are used in order to establish relationships between the stresses, stress increments and strains which develop in a simple shear test. No additional assumptions with regards the form of the yield function, the flow rule or the hardening function are required for this development. By defining the ratio of the plastic to the total shear strain increment on the horizontal plane (the plane of zero extension) as λ, it is possible to define the horizontal normal stress σx in terms of λ and other stresses and strains which are normally known during simple shear loading. As a result, all components of the stress tensor in the simple shear plane may be defined. Results of some direct simple shear tests on soft clay have been interpreted using the model and found to be generally consistent with some of the observations reported in the literature from tests in which boundary stresses were measured. 相似文献
10.
This paper explores the possibility of using well-accepted concepts—Mohr-Coulomb-like strength criterion, critical state, existence of a small strain elastic region, hyperbolic relationship for representing global plastic stress–strain behaviour, dependence of strength on state parameter and flow rules derived from the Cam-Clay Model—to represent the general multiaxial stress–strain behaviour of granular materials over the full range of void ratios and stress level (neglecting grain crushing). The result is a simple model based on bounding surface and kinematic hardening plasticity, which is based on a single set of constitutive parameters, namely two for the elastic behaviour plus eight for the plastic behaviour, which all have a clear and easily understandable physical meaning. In order to assist the convenience of the numerical implementation, the model is defined in a ‘normalized’ stress space in which the stress–strain behaviour does not undergo any strain softening and so certain potential numerical difficulties are avoided. In the first part the multiaxial formulation of the model is described in detail, using appropriate mixed invariants, which rationally combine stress history and stress. The model simulations are compared with some experimental results for tests on granular soils along stress paths lying outside the triaxial plane over a wide range of densities and mean stresses, using constitutive parameters calibrated using triaxial tests. Furthermore, the study is extended to the analysis of the effects induced by the different shapes of the yield and bounding surfaces, revealing the different role played by the size and the curvature of the bounding surface on the simulated behaviour of completely stress- and partly strain-driven tests. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
11.
A series of consolidated drained triaxial test was performed on weakly bonded soils that were artificially prepared by mixing sand (87%) and kaolin (13%). To create weakly bond strength, samples were fired at 500°C for 5 h. A critical state (CS) concept was used to interpret the results in order to describe the behaviour of the studied soil. Defining the CS is not always straightforward. Several tests showed changing in deviator stress q and volumetric strain εv up to the end of tests. Hence, defining the CS requires careful assessments on q–εa, Δu–εa, q–p′ and v–ln p′ spaces which were performed. A ‘discontinuity’ approach was applied to position the CS on dilatant path in v–ln p′ spaces after considering stress-strain and volumetric strain curves. The critical state line in a v–ln p? space from bonded samples exhibited differences to the destructured samples. This suggests that the influence of cementation bond is substantially clear at lower stresses but as stresses increase beyond the stress yield, cementation degradation becomes more significant. The effect of bonding can be clearly visualised from the normalisation of the stress paths of destructured and bonded samples. 相似文献
12.
Improved rotational hardening rule for cohesive soils and definition of inherent anisotropy 
下载免费PDF全文
下载免费PDF全文 Improved, microfabric‐inspired rotational hardening rules for the plastic potential and bounding surfaces associated with the generalized bounding surface model for cohesive soils are presented. These hardening rules include 2 new functions, fη and , that improve the simulation of anisotropically consolidated cohesive soils. Three model parameters are associated with the improved hardening rules. A detailed procedure for obtaining suitable values for these parameters is presented. The first 2 parameters affect the simulation of constant stress ratio loading where, because of the presence of fη, the third parameter is inactive. The second new function, , accelerates the rotation of the plastic potential and bounding surfaces during shearing, which is particularly important for overconsolidated soils tested in extension. This paper also describes the proper manner in which to define the inherent anisotropy. This seemingly straightforward test has rarely been discussed in sufficient detail. 相似文献
13.
The aim of this note is to quantify the influence of soil structure on the compression behaviour of natural soils using the disturbed state concept (DSC). The behaviour of the fully adjusted state is chosen to be that of the corresponding soil in a reconstituted condition so that the disturbance function is a direct measure of the effects of soil structure. A new DSC compression model is proposed. This model is able to describe the compression behaviour of structured soils under loading, swelling and reloading. Special versions of the proposed model are also described for situations (a) where the compression behaviour of the corresponding reconstituted soils is linear in the e–ln p′ space and (b) where the compression is one‐dimensional. The ability of the proposed model and its various versions to describe the compression behaviour of structured soils has been verified. Copyright © 2000 John Wiley & sons, Ltd. 相似文献
14.
Manuela Cecconi Antonio DeSimone Claudio Tamagnini Giulia M.B. Viggiani 《国际地质力学数值与分析法杂志》2002,26(15):1531-1560
A constitutive model for granular materials is developed within the framework of strain–hardening elastoplasticity, aiming at describing some of the macroscopic effects of the degradation processes associated with grain crushing. The central assumption of the paper is that, upon loading, the frictional properties of the material are modified as a consequence of the changes in grain size distribution. The effects of these irreversible microscopic processes are described macroscopically as accumulated plastic strain. Plastic strain drives the evolution of internal variables which model phenomenologically the changes of mechanical properties induced by grain crushing by controlling the geometry of the yield locus and the direction of plastic flow. An application of the model to Pozzolana Nera is presented. The stress–dilatancy relationship observed for this material is used as a guidance for the formulation of hardening laws. One of the salient features of the proposed model is its capability of reproducing the stress–dilatancy behaviour observed in Pozzolana Nera, for which the minimum value of dilatancy always follows the maximum stress ratio experienced by the material. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
15.
In this article we present closed‐form solutions for the undrained variations in stress, pore pressure, deformation and displacement inside hollow cylinders and hollow spheres subjected to uniform mechanical pressure instantaneously applied to their external and internal boundary surfaces. The material is assumed to be a saturated porous medium obeying a Mohr–Coulomb model failure criterion, exhibiting dilatant plastic deformation according to a non‐associated flow rule which accounts for isotropically strain hardening or softening. The instantaneous response of a porous medium submitted to an instantaneous loading is undrained, i.e. without any fluid mass exchange. The short‐term equilibrium problem to be solved is now formally identical to a problem of elastoplasticity where the constitutive equations involve the undrained elastic moduli and particular equivalent plastic parameters. The response of the model is presented (i) for extension and compression undrained triaxial tests, and (ii) for unloading problems of hollow cylinders and spheres through the use of appropriately developed closed‐form solutions. Numerical results are presented for a plastic clay stone with strain hardening and an argilite with strain softening. The effects of plastic dilation, of the strain softening law and also of geometry of the cavity on the behaviour of the porous medium have been underlined. Analytical solutions provide valuable benchmarks enabling various numerical methods in undrained conditions with a finite boundary to be verified. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
16.
An incremental plasticity theory has been developed to describe the mechanical behaviour of anisotropically consolidated clays. The theory removes some of the shortcomings of the existing critical state models by incorporating the effects of the initial anisotropy due to a known depositional stress history and its subsequent alteration during further plastic deformation under a general stress system. From the extensive comparisons with the reported results in the literature, it is established that the model is satisfactory in predicting the various aspects of drained as well as undrained behaviour of K0-consolidated clays. 相似文献
17.
The action of tunnel excavation reduces the in-situ stresses along the excavated circumference and can therefore be simulated by unloading of cavities from the in-situ stress state. Increasing evidence suggests that soil behavior in the plane perpendicular to the tunnel axis can be modelled reasonably by a contracting cylindrical cavity, while movements ahead of an advancing tunnel heading can be better predicted by spherical cavity contraction theory. In the past, solutions for unloading of cavities from in-situ stresses in cohesive-frictional soils have mainly concentrated on the small strain, cylindrical cavity model. Large strain spherical cavity contraction solutions with a non-associated Mohr–Coulomb model do not seem to be widely available for tunnel applications. Also, cavity unloading solutions in undrained clays have been developed only in terms of total stresses with a linear elastic-perfectly plastic soil model. The total stress analyses do not account for the effects of strain hardening/softening, variable soil stiffness, and soil stress history (OCR). The effect of these simplifying assumptions on the predicted soil behavior around tunnels is not known. In this paper, analytical and semi-analytical solutions are presented for unloading of both cylindrical and spherical cavities from in-situ state of stresses under both drained and undrained conditions. The non-associated Mohr-Coulomb model and various critical state theories are used respectively to describe the drained and undrained stress-strain behaviors of the soils. The analytical solutions presented in this paper are developed in terms of large strain formulations. These solutions can be used to serve two main purposes: (1) to provide models for predicting soil behavior around tunnels; (2) to provide valuable benchmark solutions for verifying various numerical methods involving both Mohr–Coulomb and critical state plasticity models. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
18.
Wheeler, Sharma and Buisson proposed an elasto‐plastic constitutive model for unsaturated soils that couples the mechanical and water retention behaviours. The model was formulated for isotropic stress states and adopts the mean Bishop's stress and modified suction as stress state variables. This paper deals with the extension of this constitutive model to general three‐dimensional stress conditions, proposing the generalized stress–strain relationships required for the numerical integration of the constitutive model. A characteristic of the original model is the consideration of a number of elasto‐plastic mechanisms to describe the complex behaviour of unsaturated soils. This work presents the three‐dimensional formulation of these coupled irreversible mechanisms in a generalized way including anisotropic loading. The paper also compares the results from the model with published experiments performed under different loading conditions. The response of the model is very satisfactory in terms of both mechanical and water retention behaviours. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
19.
This paper presents a general one-dimensional (1-D) finite element (FE) procedure for a highly non-linear 1-D elastic visco-plastic (1-D EVP) model proposed by Yin and Graham for consolidation analysis of layered clay soils. In formulating the 1-D FE procedure, a trapezoidal formula is used to avoid the unsymmetry of the stiffness matrix for a Newton (modified Newton) iteration scheme. Unlike many other 1-D FE approaches in which the initial in situ stresses (or stress/strain states) are considered indirectly or even not considered, the initial in situ stress/strain states are taken into account directly in this paper. The proposed FE procedure is used for analysis of 1-D consolidation of a clay with published test results in the literature. The FE modelling results are in good agreement with the measured results. The FE model and procedure is then used to analyse the consolidation of a multi-layered clay soils with a parametric study on the effects of the variations of creep parameters in Yin and Graham's 1-D EVP model. It is found that the creep parameters ψ/V and t0 have significant influence on the compression and porewater pressure dissipation. For some boundary conditions, changes of parameters in one layer will have some effects on the consolidation behaviour of another layer due to the different consolidation rates. Finally, the importance of initial stress/strain states is illustrated and discussed. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
20.
A viscoplastic subloading soil model for rate‐dependent cyclic anisotropic structured behaviour 下载免费PDF全文
下载免费PDF全文 This paper presents a new purely viscoplastic soil model based on the subloading surface concept with a mobile centre of homothety, enabling the occurrence of viscoplastic strains inside the yield surface and avoiding the abrupt change in stiffness of the traditional overstress viscoplastic models. This is required for overconsolidated soils. The model is formulated to reproduce the soil rate‐dependent behaviour under cyclic loading (changes in loading direction) and incorporates both initial and induced anisotropy, as well as destructuring. The model shows good qualitative response to some imposed three‐dimensional stress paths under quasi‐inviscid (elastoplastic) behaviour. Some of the main time‐dependent aspects of soil behaviour that the model is capable of reproducing were also illustrated. The capability of the model to adequately reproduce the results from an undrained triaxial test performed on stiff overconsolidated clays from the Lisbon region (Formação de Benfica), with an unloading–reloading deviatoric stress cycle at constant mean stress, that incorporates a series of staggered fast loading and creep stages, was evaluated. The model was able to reproduce well the main observed aspects of the time‐dependent stress–strain response and pore pressure evolution of a stiff overconsolidated clay under complex loading. The revised and generalised viscoplastic subloading surface concept is viable and can be applied to a consistent extension to viscoplasticity, including in the interior of the yield surface, of existing elastoplastic models formulated for soils and other materials. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献