共查询到20条相似文献，搜索用时 46 毫秒
1.
Sand production is a complex physical process that depends on the external stress and flow rate conditions as well as on the state of the material. Models developed for the prediction of sand production are usually solved numerically because of the complexity of the governing equations. Testing of new sand production models can very well be performed through calibration with laboratory experiments, which by construction possess geometric symmetry facilitating explicit mathematical analysis. We introduce an erosion model that is built upon the physics (poro‐mechanical coupling of the fluid‐solid system) usually incorporated in erosion models for the prediction of sand production. Around this model, we set up a mathematical framework in which sand production models because of erosion can be tested and calibrated without having to resort to complex numerical work or specialised software. The model is validated by data of volumetric sand production from a hollow cylinder test on synthetic sandstone. Generalisations of the model, which are naturally incorporated in the same framework and have useful phenomenological features, are discussed. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
2.
A technique has been developed to control the strength of moistened sand in a quantifiable, accurate and reproducible way, while other mechanical properties were maintained. Strength of dry sand was increased through adding a small amount of liquid. In order to control the additional cohesion of moist sand, the influence of the surface tension of the liquid was investigated. Direct shear experiments were performed on four granular materials at confining stress levels below 1 kPa. It has been found that the surface tension of the added liquid controlled the additional apparent cohesion of sand with high accuracy. The mechanical properties of moist sand show dynamic similarity towards natural brittle rock, which enables analogue modelling of fault formation, fault reactivation and tension fracture formation in the brittle regime with a controlled strength profile. Furthermore, experimental results fit well to shear strength models. From this followed the direct proportionality of the unsaturated shear strength parameter φb relative to the matrix suction, measured at low stress levels. Moreover, shear strength turned out to be also a function of grain size and the grain shape. 相似文献
3.
水岩作用对内蒙古南部砒砂岩风化侵蚀的影响分析 总被引：4，自引：0，他引：4
砒砂岩是指在内蒙古东胜至准格尔旗一带,发育于三叠纪、侏罗纪、白垩纪时期的一套河流相碎屑岩沉积,是黄河中游集中的基岩产沙区和粗泥沙的主要来源地之一。通过野外调查、样品采集和测试、水岩作用模拟等方法,分析雨水对岩石风化侵蚀的影响。对水样品测试结果的逆向模拟显示雨水对砒砂岩主要有3个方面的作用：(1)减小岩体内部粘结力,增加岩体孔隙度,促使方解石、长石、白云石、石膏和岩盐等溶解,使得岩体内孔隙度增大;(2)发生化学溶蚀,长石等矿物易于风化成高岭石、钙蒙脱石,扩大岩体中的裂隙;(3)钙蒙脱石的沉淀量较大,其遇水即膨胀的特性会给岩体内部增大压力而破坏岩石结构。水岩作用影响了砒砂岩的物理力学性质,加剧了砒砂岩风化与侵蚀。
相似文献
4.
Abdelali Dadda Christian Geindreau Fabrice Emeriault Annette Esnault Filet Aurélie Garandet 《国际地质力学数值与分析法杂志》2019,43(2):568-577
The mechanical efficiency of the biocementation process is directly related to the microstructural properties of the biocemented sand, such as the volume fraction of calcite, its distribution within the pore space, coordination number, contact surface area, and types of contact. In the present work, some of these microscopic properties are computed, from 3D images obtained by X-ray tomography of biocemented sand. These properties are then used as an input in current analytical models to estimate the elastic properties (Young and shear moduli) and the strength properties (Coulomb cohesion). For the elastic properties, the analytical estimates (contact cement theory model) are compared with classical bounds, self-consistent estimate and numerical results obtained by direct computation (FEM computation) on the same 3D images. Concerning the cohesion, an analytical model initially developed to estimate the cohesion due to suction in unsaturated soils is modified to evaluate the macroscopic cohesion of biocemented sands. Such analytical model is calibrated on experimental data obtained from triaxial tests performed on the same biocemented sand. In overall, the presented results point out the important role of some microstructural parameters, notably those related to the contact, on such effective parameters. 相似文献
5.
Blown sand has caused considerable damage to the Dunhuang Mogao Grottoes of China. Controlling the blown sand requires a clear understanding of the processes that govern its production and movement. Experiments were conducted in a wind tunnel and in the field to define the relationships between sand production and gravel coverage in the gobi above the Mogao Grottoes. The gravel that covers the gobi’s surface controls wind erosion, irrespective of its shape and size. The equilibrium coverage by gravel over which no further sand is emitted due to wind erosion increases and the equilibration time that is taken to form the equilibrium gravel coverage decreases with increasing wind velocity. Gravel coverage has reached an equilibrium state in the portion of the gobi directly above the grottoes, but decreases towards the Mingsha Mountains. Drifting sand from these mountains is the main source of sand damage at the Mogao Grottoes. If no additional sand from the mountains were supplied to the gobi, gravel pavements would reach an equilibrium level of coverage and prevent further production of blowing sand. Sand blown from the gobi represents secondary reactivation of sediments originally produced in the Mingsha Mountains. Therefore, to control the blowing sand above the Mogao Grottoes, emphasis should be placed on controlling erosion from the Mingsha Mountains rather than local erosion of sand in the gobi. 相似文献
6.
A sand production model was developed for volumetric sand production predictions that take into account the effects of the external stresses and fluid flow rate. The model couples the poro‐mechanical behaviour of the solid–fluid system with the erosion behaviour of the solids due to fluid flow. It predicts reasonably experimental volumetric sand production data from a hollow cylinder test on a weak sandstone. The test results show that in weak and compactive sandstones, sand production is associated with decohesioning and plasticification of a zone around the inner hole which can then be mobilized by the hydrodynamic forces of the fluid flow. The sand production rate increases both with external applied stress and fluid flow rate but it is constant with time under constant external stress and fluid flow rate. In both cases a critical lower limit has to be exceeded for sand production initiation. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
7.
Erosion is a complex process consisting of many components such as surface runoff, impact of raindrops, wind forces, soil and rock mechanics, etc. Trying to integrate all these processes into a physical model seems to be hopeless. In order to understand the variety of natural shapes and patterns produced by erosion we present an integrated statistical approach. Our model is based on simple physical constraints for the separation of amalgamated particles (abrasion) and for the movement of loose particles (denudation) and on the laws of statistics. After some simplifications, we obtain a nonlinear system of partial differential equations which is solved using finite volume techniques. The model is suitable for the formation of different types of rill systems and the episodic behaviour of erosion processes, a kind of self-organized criticality. Besides effects of inhomogeneities, e.g. the formation of terraces can be investigated. 相似文献
8.
选择青海共和盆地多石在沟河道中6道新月形沙丘链作为研究对象,采用Trimble4700DGPS与常规测量手段,结合野外风沙观测与自动气象站数据,初步观测分析了2006年多石在沟河道沙丘在不同季节的形态变化过程,计算出2006年风季前比雨季后多石在沟河道沙丘体积减小了548.3m3,风积量为2351m3,流水的蚀平量为2899m3,2006年风水两相营力对河道沙丘的侵蚀贡献率约为45%∶55%,流水的搬运作用强于风力的堆积作用。但从较长的时间尺度来看,研究区的风力侵蚀作用强于流水侵蚀作用,河道沙丘不断增大。多石在沟河道沙丘是一个典型的风水交互作用系统,河道成为风力与流水交互作用的"中转站",在风水的交替作用下,沉积物由风积环境进入流水环境中。 相似文献
9.
基于微观结构的青藏高原风积沙导热系数变化机理研究 总被引：1，自引：0，他引：1
风积沙作为青藏高原一种重要的局地因素, 改变了多年冻土的赋存条件. 风积沙的导热系数特征对预报分析其对冻土赋存有利或者不利具有重要作用. 采用非稳态法对青藏高原红梁河风积沙进行了导热系数测试, 并结合电镜扫描/能谱分析, 从微观结构的角度探讨了风积沙的导热系数变化机理. 结果表明: 研究区风积沙平均粒度为242.427 μm; 标准偏差值为0.125, 分选极好; 偏度为0.359, 接近对称; 峰度值为1.086, 峰态中等; 颗粒粒径主要分布在75～500 μm之间, 沙粒均匀, 不含黏土及砾石成分, 自然堆积状态下其孔隙率为0.391. 天然状态下的风积沙颗粒呈类球形, 颗粒磨圆度高, 点与点接触, 颗粒间孔隙较大; 表面有明显撞击坑和擦痕, 这导致颗粒的比表面积增大, 连通性增强, 孔隙率增加. 干燥状态下风积沙颗粒的相互接触面积较小, 孔隙由空气填充, 导热系数较低; 而在湿润状态下, 正温时孔隙中的水间接增大了风积沙的接触面积, 导致其导热系数增大; 负温时, 孔隙内的水变成冰, 从而导致导热系数进一步增大. 天然状态下, 暖季地表风积沙含水量较低, 导热系数较低, 而冷季地表风积沙含水量较大, 导热系数较大. 此外, 风积沙为颗粒物质, 表面光滑, 颗粒之间粘性小, 孔隙未被填堵, 结构松散, 这些因素导致自然堆积状态下其渗透系数较一般细砂大, 透水性良好, 保水性差, 是防冻胀较好的换填材料. 相似文献
10.
层序底界面的物质表现形式--以中国南方海相震旦系-中三叠统为例 总被引：8，自引：1，他引：8
众所周知,在层序地层学研究中最关键的是层序划分,而层序划分的关键是有关界面的识别,可用于确定层序的界面包括层序的底界面,初始海泛面和最大海泛面,其中最为重要的是层序底界面的识别,这是层序划分的基础和前提。以中国南方海相震旦系-中三叠统为例,在大量野外剖面详细观测的基础上,识别出了层序底界面的物质表现形式有 9种类型,它们分别是:①古风化壳,②渣状层,③河流回春作用面,④古喀斯特作用面,⑤斜坡重力流冲刷侵蚀面,⑥盆地内浊流侵蚀面,⑦火山事件作用面,⑧岩性、岩相转换面,⑨上超面。详细讨论了各类型界面的特征,这对于正确识别和划分层序具有重要的意义 相似文献
11.
针对长距离河段大量人工采沙、挖槽发生的河床溯源冲刷影响因素、发展规律及预测方法进行研究。考虑该问题的清水冲刷特征,建立了一维水动力学方程、河床变形和推移质输沙方程组,用TVD（Total Vartation Diminishing）性质的MUSCL-Hancock时空二阶格式和对水流、河床变形方程分别用有限体积和有限差分法进行数值求解,用水槽试验作了验证并研究了溯源冲刷规律。溯源冲刷长度在初期30%的时间内可达平衡时的80%,冲刷速率随来流强度、跌坎高度和跌水水头差明显增大。平衡溯源长度随流量的线性增长率约为0.8,随跌水高差的增长较缓,冲刷最大厚度约为跌坎高度的0.5倍。采沙挖槽河床一旦形成溯源冲刷,则发展迅速,流量和跌水高差是重要影响因素。在合理考虑输沙方程的基础上,该数值模型可用于溯源冲刷的预测,计算速度快且精度较高。 相似文献
12.
13.
Abstract High‐angle accumulations of sand and escarpment‐derived gravel along the outcrop walls of Plio‐Pleistocene sandstones, eastern Jordan, form small, coalesced colluvial fans, built by rockfalls, rockfall‐derived debris flows, dry sandfalls and sandy grainflows. These deposits are sourced through wind erosion of fault‐controlled outcrops of weakly cemented sandstone and a hard, gypsum‐cemented sandstone and fine conglomerate caprock exposed in sandpits. Eroded sediment is supplied to the fans directly as rockfalls and sandfalls, and indirectly as gully‐confined sandy grainflows. The preserved colluvium fans comprise sandy, matrix‐rich rockfall, rockfall‐derived, dry debris‐flow lenticular gravel deposits and minor lenticular sandy grainflow deposits. The fans develop initially against the footwall escarpment and, as erosion continues, the outcrop and the fans become covered by stable sand sheet ramps in a self‐regulatory geomorphic system. Preserved fan–sand ramp systems in eastern Jordan are characterized by a threefold hierarchy of genetically related bounding surfaces, which develop over short time scales. Rapid fault‐controlled uplift and/or rapid stream incision may produce non‐equilibrium scarp faces, identical to those in the sandpits, associated with the colluvial fan–sand ramp systems. Thus, such systems have the potential to identify fault‐related unconformities, rapid uplift events and episodes of rapid downcutting in the rock record. Colluvium deposits have good preservation potential, but are often associated with complex, coarse, basin‐margin facies, and are thus difficult to identify in the stratigraphic record; a problem exacerbated by the lack of adequate colluvium facies models and diagnostic sedimentary criteria. 相似文献
14.
珊瑚砂作为一种特殊的生物碎屑沉积物,我国南海广泛分布,其具有多孔、非均质、非连续等工程特性,作为填岛的材料和工程建设的基础,吹填珊瑚砂的力学特性是珊瑚岛礁工程研究的关键科学问题。中国南海降雨量大,吹填珊瑚砂渗透性好,工程荷载高,含水性和高荷载对于吹填珊瑚砂剪切力学特性的影响非常显著。利用自主研制的土石混合体大型剪切力学试验机,采用中国南沙某岛礁吹填珊瑚砂,在级配和组分分析的基础上,研究不同密实度、含水量条件下高轴向荷载珊瑚砂的剪切力学特性,通过试验结果分析得出如下结论:(1)含水量增加导致吹填珊瑚砂抗剪强度减小,呈负相关关系;密实度增加引起抗剪强度增加,呈正相关关系;(2)含水量对吹填珊瑚砂内摩擦角影响显著,呈负相关关系,含水量大于10%,内摩擦角降低较小;密实度90%时,含水量大于5%,黏聚力降低较小;(3)密实度对吹填珊瑚砂的黏聚力影响规律不明显,密实度对内摩擦角影响较显著,当含水量大于5%时,随着密实度的增加内摩擦角显著增大;(4)在高荷载条件下,含水量和密实度对吹填珊瑚砂抗剪力学特性影响较为显著,含水量小、密实度大的吹填珊瑚砂抗剪特性最强,对于岛礁填岛工程设计及场地条件改性具有指导意义。 相似文献
15.
孔隙的存在是岩土类介质材料结构的本质特征,它不但改变了岩土体的力学特性,而且严重影响着岩土体的渗透特性。大多数经典的渗流理论中,多孔介质模型都假定孔隙率和渗透系数是与时间无关的材料常数。实际上由于淘涮、侵蚀、冲刷等原因,它们是随时间和坐标变化的,同时又与孔隙中的压力、流速等因素有关。基于孔隙率和损伤变量之间的定量关系,从连续损伤力学的角度对多孔介质岩土材料的渗流力学特性进行了研究。首先,对传统的达西定律形式进行修正,提出了孔隙介质完备有效的达西定律（模型）;然后,对该模型中渗透参数的特性进行了讨论和分析,得出了一些有益的结论。 相似文献
16.
为研究原地浸矿母液对离子型稀土矿收液底板的侵蚀影响,以离子型稀土矿基岩（半/弱风化花岗岩）为研究对象,开展了室内浸矿模拟试验。对比分析了不同浸矿时间岩样的应力−应变曲线、峰值应力、峰值应变和弹性模量,获取了不同浸矿历时岩样的孔隙度和细观形貌特征,并运用盒维法对岩样的非线性裂纹特征进行了定量化描述。结果表明：浸矿侵蚀作用对离子型稀土矿底板基岩力学性质的影响主要表现在前150 d,破坏形式由贯穿破坏转变为贯穿破坏与片状剥落并存;浸矿母液侵蚀作用下,基岩力学特性呈现先大幅减小后大幅回升,其后在小范围波动现象,浸矿约60 d对基岩力学特性的影响程度最大;浸矿母液侵蚀造成基岩内小孔隙增长,导致表面出现腐蚀及孔洞现象;浸矿时间不同将造成岩石不同的微观结构变化。 相似文献
17.
Dune plants both modify the wind field around them and are impacted by various stress factors, among them sand erosion and sand deposition. As coastal dunes are being either stabilized or remobilized, in response to the changes in the rates of sand and dune movement, the vegetation cover and composition are expected to vary reflecting the differences in the sedimentary conditions. In this field study 315 quadrats of 100 m2 , in which the perennial plant species were sampled, were analysed with respect to annual rates of sand erosion and deposition that were measured using erosion pins. A visual exploratory data analysis was introduced, based on selective filtering of samples according to their vegetation cover. This method, combined with established statistical tools, enabled the authors to uncover the inclination and indicative power of nine perennial dune plants to either a stabilized or a mobile environment, and to establish whether they are more prevalent in places undergoing sand erosion or sand burial. Two species were found to be clear indicators of a stabilized environment, Stipagrostis lanata , and Retama raetam . Of the species indicating a mobile environment, only one may be stated as a clear indicator of sand erosion: Silene succulenta , with Cyperus macrorrhizus coming close to being an indicator of a less mobile erosive environment. The best indicator species for sand burial was found to be, as expected, Ammophila arenaria , with Artemisia monosperma also indicating high rates of sand mobility especially when its relative cover is higher than 80%. Such information can be used to monitor natural processes of dune stabilization or reactivation, or to assess the success of a management plan that aims at stabilizing a dune, or at remobilizing it by removing vegetation. 相似文献
18.
在富水砂层地质条件下,基坑支护常因止水缺陷导致水土大量流失,进而引发地表沉降。目前有关止水缺陷导致基坑漏水漏砂灾害方面的研究还有待深入。本文以江西省南昌市临近赣江某地铁基坑砂土为研究对象,考虑基坑止水缺陷高宽比因素,通过可视化室内实验装置研究基坑缺陷漏水漏砂灾害的演化过程,并利用PFC3D软件进行模拟对比分析,探究几何形态和微观变化过程。结果表明：止水缺陷高宽比越大,漏水漏砂发展速度越快,颗粒流失速率越大,砂土颗粒受侵蚀范围越大;缺陷高宽比由1:1增加至2:1时,颗粒损失个数由2673扩大至40127,土拱形成时间从60万步发展至无法形成土拱,存在出现土拱时的临界缺陷高宽值。数值模拟过程中的配位数波动表明,漏水漏砂过程中细颗粒与粗颗粒骨架之间一直产生着剧烈碰撞,水土的流失导致孔隙率与渗透系数的增加,进而又加剧漏水漏砂现象。 相似文献
19.
黄河中游岩土侵蚀问题及防治对策探讨 总被引：1，自引：0，他引：1
黄河中游出露地层岩性主要有古生界奥陶系碳酸盐岩、石炭系和二叠系碎屑岩;中生界三叠系砂泥岩、侏罗系砂泥岩和白垩系砂泥岩;新生界古近系砂泥岩、新近系(原为第三系)红土及第四系风积黄土和现代风积沙。第四系黄土厚度大,结构松散,遇水易解体,具湿陷性,是黄河中游粗泥砂的主要物源;第四系风积沙分布于黄河中游北部,亦是黄河中游粗泥砂的主要物源。岩土侵蚀类型有五:一是风力侵蚀—风沙侵蚀;二是降雨对谷坡面的面状冲刷—坡面侵蚀;三是地表径流对谷底的侧蚀—沟谷侵蚀;四是滑塌对谷坡坡体的破坏—重力侵蚀;五是潜蚀。并对不同侵蚀类型提出了不同的防治对策。 相似文献
20.
岩体与岩石的力学强度之间既有内在联系又存在明显的差异,场地岩石力学指标对于评价场地岩体的力学特性至关重要。以三门核电场地为研究对象,在室内岩石力学试验的基础上,结合野外地质调查,综合考虑岩体结构特征和应力分布状态等因素的影响,引入定量描述岩体结构特征和风化程度的地质强度指标（GSI）,采用Hoek Brown强度准则估计岩体力学参数,同时与岩体地质力学分类法（RMR）计算得到的岩体力学参数进行对比分析。基于GSI的Hoek-Brown法得到的中等风化凝灰质砂岩、微风化凝灰质砂岩和微风化安山玄武岩岩体的c值分别为4.03、6.20、6.10 MPa,φ值分别为31.96°、34.37°和33.87°。基于RMR评分的Hoek-Brown法得到的c值分别为4.42、6.44、7.24 MPa,φ值分别为28.92°、32.43°和34.51°。研究结果表明,采用Hoek-Brown准则确定的核电场地岩体力学强度指标比较合理,得到的岩体力学指标可以作为核电站基础设计的重要依据。 相似文献