共查询到20条相似文献，搜索用时 187 毫秒
1.
Following 35 years of persistent groundwater rise beneath northern Ivanhoe Plain in the Ord River Irrigation Area, northern Australia, the water table appears to have stabilized near the base of the irrigation surface-drain network. Hydrometric evidence indicates that intersection of the deepest surface drains by the rising water table simultaneously reduced aquifer recharge from surface-water infiltration and increased aquifer discharge by groundwater exfiltration. Water-table analysis supports the working hypothesis that the largest irrigation drain D4 on north Ivanhoe Plain has been receiving a significant amount of groundwater discharge since the mid-1990s. The rate of groundwater discharge to surface drains on north Ivanhoe Plain was estimated to be around 15–20 million (M)L/day based on groundwater-flow modelling. Groundwater tracing using radon and electrical conductivity indicated that groundwater discharge to drain D4 was ～6–12 ML/day in August 2007. The rate of groundwater discharge was significantly larger where the drain traverses a very-permeable sand and gravel palaeochannel. Relatively modest exfiltration rates of order of magnitude tens to hundreds of mm/day into the drain were estimated to mitigate 0.5 m/year groundwater accretion for a land area of order of magnitude hundreds to thousands of ha. 相似文献
2.
竖向排水体包括砂井和塑料排水板已广泛应用于加速软黏土地基的固结。不同形式的轴对称条件下含竖向排水体均质各向同性地基的固结解析解答也相继被提出,而各种解答均假定地基中附加应力在竖向排水体的深度范围内是均匀分布的。显然,当竖向排水体深度与地面堆载区宽度的比值相对较高,或竖向排水体的影响区域靠近地面堆载区的边缘时,这个假定并不适用。为此,在现有径竖向耦合固结等应变解的基础上,提出任意分布的地基附加应力条件下的解答,并分析附加应力分布形式和线性加载速率对地基固结的影响。结果表明,均匀分布的附加应力条件下的解答低估了地基的固结速率,而瞬时加载条件下的解答则高估了地基的固结速率。 相似文献
3.
Surface water bodies interact with underlying aquifer systems, creating a complex flow system and flow paths. In general, a surface water body may be classified as gaining, losing, or flow through on the basis of its interaction with the surrounding aquifer. In the Nile Valley, the quaternary aquifer system is in a direct hydraulic interaction with the River Nile, canals, and drains. In this study, a regional numerical model was developed and used to evaluate the interaction between surface water bodies and the quaternary aquifer system in the Nile Valley. The solution is considered for a quasi three-dimensional, steady-state groundwater flow. The model used simulates the interaction between surface water bodies and groundwater for saturated and unsaturated flow conditions. In addition, a hydrodynamic model was used to simulate different extreme (high and low) scenarios for Nile surface water levels along the distance between Old Aswan Dam and Delta Barrages. Model calibration shows close results, and the model was used to simulate surface water levels. Results indicate that the Nile River acts as a drain for the quaternary aquifer (gaining water from the aquifer), although in the reaches upstream of the main barrages, the Nile loses the water, recharging the aquifer. All other main canals are recharging the aquifer system. The seepage rate depends mainly on the difference in piezometric head between the aquifer system and surface water bodies, as well as the hydraulic conductance of the base layer sediments of the surface water body. The model was used to evaluate the regional water balance for the Nile Valley and to estimate the surface water bodies' gains and losses. 相似文献
4.
深基坑降水中不同的地质模型有限元应用研究 总被引：2，自引：0，他引：2
分析水-土耦合场相互作用时,将岩土视作弹塑性材料。在非线性本构关系下,考虑渗透作用,得出岩土体有限元方程,建立了基坑降水的三维水-土耦合的数学模型。对基坑降水中不同的地质模型潜水、承压水及有越流补给和实际工程条件井管、过滤管、止水帷幕分别进行了计算处理,并以武汉国际证券大厦降水工程为实例,对其降水过程进行了三维有限元计算。应用三维数值模拟方法,能很好地模拟基坑防渗帷幕、非均质和各向异性、承压-无压等一些解析法难以处理的实际工程条件和地质模型。 相似文献
5.
A modification is proposed of Torricelli’s (1608–1647) formula for the velocity of water discharging from a small hole at the bottom of a large tank filled with fractal solid material. The new formula takes proper account of the mechanical energy losses due to flow in the solid matrix, thus expanding the area of validity of the classical Torricelli’s formula. Moreover, it offers a convenient alternative to Darcy’s law for estimating the discharge rate from an aquifer. The new formula was derived from laboratory experiments, with a low-Reynolds number discharge flow (Darcian flow). It was tested in a natural karst aquifer where the flow is non-Darcian, at Almiros spring on the island of Crete (Greece). In both cases, the predictive capability of the modified formula is established. 相似文献
6.
由含水层底部向上施工疏放水孔（井）进行疏水降压是保证煤矿安全开采的重要措施之一,该类疏放水孔与地面抽水井的渗流特征具有显著差别。为了研究井下疏放水孔的渗流特征,以非承压含水层底部单井疏放水孔为例,采用数值模拟的方法对其渗流特征进行研究。研究结果表明,当疏放水井的井长lw小于临界长度lc时,即lwc,疏放水井上部含水层孔隙水压力大于0,且由下而上呈先增加后减小的分布规律,渗流量与井长呈指数函数关系增加;当lw ≥ lc时,疏放水非完整井的渗流特征及渗流量与完整井相同;渗流量随井半径增加呈指数关系增加,且指数小于1;将s+lw代替水位降深s对裘布依（Dupuit）潜水完整井计算公式进行修正,当lwc时,采用修正的Dupuit潜水完整井计算公式计算疏放水非完整井渗流量更精确。该研究结果对认识井下疏放水井上部孔隙水压力分布特征及合理布置疏放水井具有重要的借鉴意义。 相似文献
7.
The soil around a drain well is traditionally divided into smeared zone and undisturbed zone with constant hydraulic conductivity. In reality, hydraulic conductivity of the soil changes continuously and it may not be always appropriate to approximate its distribution with two zones. In this study, the horizontal hydraulic conductivity of the soil is described by an arbitrary function of radial distance. The horizontal flow under equal strain condition is analysed for a soil–drain system with a circular or regular polygonal boundary. It is found that the horizontal flow can be generally characterized with a linear equation in which the flow rate of water through soil–drain interface is proportional to the difference between the average excess pore pressure in the soil and the excess pore pressure in the drain well. The water exchange between the drain and the soil is analogous to that between fractures and matrix in a double porosity system, a popular conceptual model of fracture rocks. On the basis of this characterization, a simplified approach to analyse soil–drain systems is developed with one‐dimensional double porosity model (DPM). Analytical solutions for both fully and partially penetrating drains are derived. The solution for partially penetrating drains is compared with both numerical and approximate analytical results in literature. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
8.
文章从一维地下水运动和渗透力学的角度,分析比较潜水位上升与承压水位下降对岩溶地区透—阻型盖层中阻水层渗透稳定性的影响,重点讨论了承压水位下降速度(降速)与下降深度（降深）对阻水层中渗透坡降的影响,结果表明:地下水位变化（潜水位上升或承压水位下降）产生的非稳定渗流不利于岩溶洞穴开口上方阻水层的稳定,承压水位的下降对岩溶开口附近处阻水层中渗透力的影响远大于潜水位的变化;在承压层水位最大降深确定的条件下,承压水位下降速度愈快,岩溶开口附近处阻水层中向下渗透力愈大。因此,在覆盖型岩溶地区抽取地下水时,为了减缓或避免覆盖型塌陷的发生,应同时控制好最大降深和最大开采速度。 相似文献
9.
Groundwater is a treasured earth’s resource and plays an important role in addressing water and environmental sustainability. However, its overexploitation and wide spatial variability within a basin and/or across regions are posing a serious challenge for groundwater sustainability. Some parts of southern West Bengal of India are problematic for groundwater occurrence despite of high rainfall in this region. Characterization of an aquifer in this area is very important for sustainable development of water supply and artificial recharge. Electrical resistivity surveys using 1-D and 2-D arrays were performed at a regular interval from Subarnarekha River at Bhasraghat (south) to Kharagpur (north) to map the lithological variations in this area. Resistivity sounding surveys were carried out at an interval of 2–3 km. Subsurface resistivity variation has been interpreted using very fast simulated annealing (VFSA) global optimization technique. The analysis of the field data indicated that the resistivity variation with depth is suitable in the southern part of the area and corresponds to clayey sand. Interpreted resistivity in the northern part of the area is relatively high and reveals impervious laterite layer. In the southern part of the area resistivity varies between 15 and 40 Ωm at a depth below 30 m. A 2-D resistivity imaging conducted at the most important location in the area is correlated well with the 1-D results. Based on the interpreted resistivity variation with depth at different locations different types of geologic units (laterite, clay, sand, etc.) are classified, and the zone of interests for aquifer has been demarcated. Study reveals that southern part of the area is better for artificial recharge than the northern part. The presence of laterite cover in the northern part of the area restricts the percolation of rainwater to recharge the aquifer at depth. To recharge the aquifer at depth in the northern part of the area, rainwater must be sent artificially at depth by puncturing laterite layers on the top. Such studies in challenging areas will help in understanding the problems and finding its solution. 相似文献
10.
This paper proposed a numerical formulation for unsaturated flow problems with nonlinear boundaries of seepage face and soil–atmosphere interface via the concept of parabolic variational inequality (PVI) method. A unified unilateral boundary condition was first proposed to represent the conditions on the seepage face and soil–atmosphere interface boundaries within the partial differential equation (PDE) formulation. A PVI formulation mathematically equivalent to the PDE formulation was then proposed, which automatically transforms the flux part of the unified unilateral boundary condition into the natural boundary condition and eliminates the singularity at seepage points. By discretizing the PVI formulation, a finite element procedure together with an iterative algorithm was suggested. An existing experiment of unsaturated flow in a layered hillside and a laboratory test of unsaturated flow through sand flume performed in this study were used to validate the proposed method, with a good agreement between the measured and computed results and a satisfactory balance of mass being maintained during the simulations. The numerical results also indicated that the problem of mesh dependence associated with unsaturated flow simulations is well addressed with the proposed numerical method. Finally, the process of unsaturated flow in a soil slope with layers of horizontal drains subjected to rainfall/evaporation was further examined. The numerical results reveal that the deployment of drains in a soil slope can significantly lower the pore water pressure around the drains, with the bottom layer drains being most effective in controlling the seepage flow. 相似文献
11.
复杂荷载作用下考虑下卧层三维渗流的未打穿竖井地基固结分析 总被引：2，自引：0，他引：2
针对任意复杂变荷载作用下未打穿的竖井地基,通过在竖井底面以下土层中设置虚拟竖井,使其能够合理考虑下卧层土体三维渗流问题,运用Laplace变换,求得频域内竖井地基的固结解。通过Laplace逆变换,得到了任意荷载作用下竖井地基的平均固结度、孔压消散曲线、沉降曲线。结合具体算例,对影响竖井地基固结的主要影响因素进行了详细分析,并将现有未打穿竖井地基平均固结度近似计算方法的精度和适用的范围进行了对比,得到了一些有益于工程实践的结论。 相似文献
12.
排水是岩土体及工程构筑物渗流控制的主要措施之一,其实质是通过在渗流域内形成潜在溢出边界或低水位边界而实现渗流控制的。在排水渗控条件下,渗流场往往具有强烈的边界非线性特征,Signorini型变分不等式方法从理论上为稳定和非稳定排水渗流问题提供了有效的分析方法,但其实际效果还需要得到试验的验证。通过开展含5个排水廊道的排水砂槽模型试验,研究了复杂排水条件下砂土渗流的基本规律,并通过试验数据与数值计算成果的对比分析,论证了Signorini型变分不等式方法的有效性和正确性。试验结果表明,在稳定渗流条件下,排水砂槽上游侧3个排水廊道对渗流控制起主导作用,而下游侧2个廊道则失去排水功能,数值计算与试验成果吻合较好;在非稳定渗流条件下,受测压管精度、砂样均匀性和毛细效应的影响,数值计算与试验成果存在一定偏差,但也较好地揭示了复杂排水条件下砂槽中的非稳定渗流特征。排水砂槽试验结果验证了Signorini型变分不等式方法的有效性和正确性,为复杂排水条件下岩土体及工程构筑物的渗控结构优化设计提供了有效的分析手段。 相似文献
13.
Application of electrical resistivity tomography (ERT) technique to detect underground cavities in a karst area of South Korea 总被引：1，自引：1，他引：0
Mi Kyung Park Samgyu Park Myeong-Jong Yi Changryol Kim Jung-Sul Son Jung-Ho Kim Adepelumi Adekunle Abraham 《Environmental Earth Sciences》2014,71(6):2797-2806
Recently, the electrical resistivity tomography (ERT) technique has been increasingly applied to underground cavity detection filled with groundwater and/or clay. In this study, an ERT survey was conducted to examine the spatial distribution and shape of underground cavities in a karst area in Korea. Numerical ERT modeling and inversion were carried out to select appropriate field survey parameters. Two geological structures, similar to those that exist in the field survey area, were modeled: a sinkhole model and a vein-type structure. Electrode configurations using pole–pole, pole–dipole, dipole–pole, and dipole–dipole arrays were tested with the two geologic models and compared. The numerical modeling showed that the resistivity distribution of the ERT tomogram using the pole–dipole array produced the best representation of the two models. The pole–dipole and pole–pole array configurations were applied in an ERT field survey using six boreholes. The field ERT results show that cavity areas filled with clay or groundwater appeared as low-resistivity anomalies in the limestone formation. This was particularly evident in the inclined vein-type structures attributed to fracture zones, where the field data were similar to the modeling results. Therefore, the ERT technique could be effectively used for detecting underground limestone cavities under similar geological conditions as those at our study area. 相似文献
14.
Evaluation of land subsidence by considering underground structures that penetrate the aquifers of Shanghai, China 总被引：4，自引：2，他引：2
Underground structures that penetrate into aquifers can cause groundwater-level drawdown and land subsidence. Numerical analyses, based on a three-dimensional (3-D) groundwater flow model incorporated with a 1-D consolidation model, have been conducted to assess the behaviour of seepage and effect on subsidence by considering underground structures in the multi-aquifer?Caquitard system of Shanghai, China. Two extreme scenarios were examined: (1) distributed underground structures, and (2) concentrated underground structures around the heavily urbanized area. In the first scenario, the aquifer with underground structures was substituted with another material that possessed a lower hydraulic conductivity, established using the effective-medium theory; when the ratio of the volume of the underground structures to that of selected aquifer layers??(1) low-pressure partially-confined aquifer (Aq02), (2) the first confined aquifer (AqI), and (3) the second confined aquifer (AqII)??increases by 10?%, subsidence increases by about 3, 3 and 32?%, respectively. In the second scenario, part of the aquifer material was directly replaced by the structure material (very low hydraulic conductivity). In this situation, when the ratio of the volume of the underground structure to the volume of aquifers Aq02, AqI or AqII increases by 10?%, subsidence increases by about 5, 8 or 20?%, respectively. 相似文献
15.
通过采用单位面积河流在单位水头差作用下的渗漏量来表征河流渗漏能力,建立渗流井取水理想模型,分别计算了在不同河流渗漏能力和含水层渗透性能条件下,竖井降深对渗流井出水量的影响。建立渗流井取水非稳定流模型,计算了在前期稳定竖井降深不同条件下,河流断流后渗流井出水量衰减过程及竖井降深发展过程。提出渗流井合理竖井降深应根据河流与地下水是否脱节以及含水层渗透性能,在岸边渗流井中部及一侧各布设一个观测孔,根据观测孔水位进行确定。对于含水层渗透性能较强地区,渗流井竖井降深应使得渗流井范围内地下水位与河流脱节,但高于辐射孔顶面;对于含水层渗透性能较差地区,渗流井竖井降深应使得侧部观测孔水位接近河床底面或刚出现脱节。 相似文献
16.
采用宜昌劈裂砂岩,在有、无砂岩填充条件下,分别从轴压、围压、劈裂面面积、凹凸高差、迹线长度、劈裂面2D投影面积、进出口长度、结构面粗糙度对渗流量的影响规律进行了对比分析。研究结果表明：有、无砂粒填充下轴压与渗流量均呈线性递增关系;无填充时围压与渗流量呈对数递减关系,有充填时围压与渗流量呈线性关系;无充填时渗流量与流面积呈三次函数关系,而充填后过流面积对渗流量几乎无影响;凹凸高差、2D面积与渗流量的关系也有相似规律,分析认为,这主要是砂粒充填后带来的过流通道要远大于上述三因素对过流通道的改变;无充填时,渗流量随迹线长度线性递减,有填充时该规律被淹没;无论有、无填充,渗流量与过流面粗糙度系数在一定范围内均呈现二次函数关系。这些规律能指导渗流测量时各因素的优先次序,可有效减少对次要影响因素的测量工作,同时可对渗流的数值模拟提供参考。 相似文献
17.
18.
Hesham El Ganainy M. Melih Demirkan Juan Jose Gutierrez Raghav Ramanathan Bulent Hatipoglu Mazen Elias Adib Daniel Barton 《Geotechnical and Geological Engineering》2016,34(1):125-141
Karst cavities in fissured soluble rock represent serious geotechnical hazard for civil construction and urban development. The process of cavity formation, expansion, and propagation is difficult to predict because it is driven by a combination of diverse causes, such as the dissolution rate of rock; flow of groundwater; amount of fine material within rock layers; presence of loose, uncontrolled fill over the rock; and the leakage of underground utilities. Several factors can affect cavity stability, including cavity geometry and dimensions, cavity depth, overburden surface-layer lithology, and surface-loading conditions. This paper presents a case study for karst cavities stability in the Abu Dhabi Municipality (ADM) of the United Arab Emirates as part of a comprehensive study initiated by the ADM to address the geotechnical, geologic, and hydrogeological hazards encountered in the municipality. The purpose of this study is to develop a methodology for assessing karst cavities stability in the ADM, and thereby, quantify their potential hazard for civil construction and urban development in the municipality. A numerical study is performed, using a finite difference model that is based on site-specific ground conditions encountered in a localized area. Results from this numerical investigation are presented in the form of stability charts for different lithologic and surface-loading conditions. These charts are used to develop a set of geographic information system cavity-collapse geohazard maps for the study area to factor solution cavity-collapse risk into an integrated geohazard map for the ADM. Based on available information and the case study presented herein, it is concluded that the collapse of solution cavities do not significantly contribute to the geotechnical hazard observed in the ADM. 相似文献
19.
The flow rate to fully screened, partially penetrating wells in an unconfined aquifer is numerically simulated using MODFLOW 2000, taking into account the flow from the seepage face and decrease in saturated thickness of the aquifer towards the well. A simple three-step method is developed to find the top of the seepage face and hence the seepage-face length. The method is verified by comparing it with the results of previous predictive methods. The results show that the component of flow through the seepage face can supply a major portion of the total pumping rate. Variations in flow rate as a function of the penetration degree, elevation of the water level in the well and the distance to the far constant head boundary are investigated and expressed in terms of dimensionless curves and equations. These curves and equations can be used to design the degree of penetration for which the allowable steady pumping rate is attained for a given elevation of water level in the well. The designed degree of penetration or flow rate will assure the sustainability of the aquifer storage, and can be used as a management criterion for issuing drilling well permits by groundwater protection authorities. 相似文献
20.
Bahram Nourani Farzin Salmasi Akram Abbaspour Behrooz Oghati Bakhshayesh 《Geotechnical and Geological Engineering》2017,35(2):799-808
The seepage beneath a concrete dam causes an upward force acting to the dam foundation, known as uplift. Previous literatures show that implementation of drainage wells in gravity dam foundations causes a reduction in uplift forces. The main aim of these wells is to drain excess seepage flow bypassed from the cutoff wall and to reduce the uplift force. The location of the drains in the foundation plays a key role in reducing the pressure. In the present study, effect of the location of drain pipes from the upstream face of the dam (s), space among them (n) and drain’s diameter (d) in uplift force reduction is investigated. The processes of the study have been performed by the Seep/w software based on the finite element method. Results show that the use of a drain system reduced the uplift forces developed beneath the floor of the structure. If the drain is located close to the face of the dam, it may not be effective in reducing the uplift. On the other hand, shifting it too much away from the upstream face of the dam will lead to increased total uplift. It is, therefore, desirable to find out the location of the drain such that the total uplift is optimum. Optimum location of the vertical drains is not fixed, and by increasing vertical drains distances from each other and also decreasing drain diameter, optimum location would be shifted to the downstream. For example introduction of system of pipe drains to the floor of gravity dams reduced the uplift force acting on the floor by up to 80% for d/l = 0.0004, n/l = 0.024 and s/l = 0.08. This reduction in uplift becomes up to 65% for d/l = 0.0004, n/l = 0.048 and s/l = 0.12. The best location of the drain is such that the total uplift is minimum and this is presented in both design charts and algebraic equations in this study. 相似文献