首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 28 毫秒
1.
Using a three element single mass model, this paper presents the ductility demands on the elements of torsionally unbalanced systems when subjected to strong earthquake shaking. Torsionally unbalanced systems based on nine structural configurations are considered, ranging from torsionally stiff systems with the centre of rigidity (CR) centrally located to torsionally flexible systems with CR eccentrically located. The strength of the elements is designed based on the Canadian and New Zealand codes, and the Uniform Building Code (UBC) of the United States. It is shown that all three codes can limit the ductility demands on the elements to that of a similar but torsionally balanced system when the system is torsionally stiff. However, substantial additional ductility demands on the element at the stiff edge of the system exist for torsionally flexible systems when the New Zealand code or UBC is used. The large ductility demand is caused by the low strength of the stiff-edge element permitted by these codes.  相似文献   

2.
Earthquake codes have been revised and updated depending on the improvements in the representation of ground motions, soils and structures. These revisions have been more frequently seen in recent years. One of the key changes in earthquake codes has been performed on the design spectra. In this paper, the design spectra recommended by Turkish Earthquake Code and three other well known codes (Uniform Building Code, Eurocode 8, and International Building Code) are considered for comparison. The main purpose of this study is to investigate the differences caused by the use of different codes in the dynamic analysis and seismic verification of given types of buildings located at code defined different sites. The differences in expressions and some important points for elastic and inelastic spectra defined by the codes are briefly illustrated in tables and figures. Periods, base shears, lateral displacements and interstory drifts for the analyzed buildings located at code defined ground type are comparatively presented.  相似文献   

3.
This paper presents a comparison of the seismic forces generated from a Modal Response Spectrum Analysis (MRSA) by applying the provisions of two building codes, the 1997 Uniform Building Code (UBC) and the 2000-2009 International Building Code (IBC), to the most common ordinary residential buildings of standard occupancy. Considering IBC as the state of the art benchmark code, the primary concern is the safety of buildings designed using the UBC as compared to those designed using the IBC. A sample of four buildings with different layouts and heights was used for this comparison. Each of these buildings was assumed to be located at four different geographical sample locations arbitrarily selected to represent various earthquake zones on a seismic map of the USA, and was subjected to code-compliant response spectrum analyses for all sample locations and for five different soil types at each location. Response spectrum analysis was performed using the ETABS software package. For all the cases investigated, the UBC was found to be significantly more conservative than the IBC. The UBC design response spectra have higher spectral accelerations, and as a result, the response spectrum analysis provided a much higher base shear and moment in the structural members as compared to the IBC. The conclusion is that ordinary office and residential buildings designed using UBC 1997 are considered to be overdesigned, and therefore they are quite safe even according to the IBC provisions.  相似文献   

4.
Traditionally, seismic torsional provisions have been evaluated based on the assumption that the strength of the lateral load resisting elements can be adjusted without changing their stiffness. There is an important class of elements that a change of their lateral strength implies a corresponding change of stiffness, as exemplified by reinforced concrete flexural walls. This would imply that when torsional provisions are applied to adjust the strengths of these elements, the stiffness distribution, and also the eccentricity of the system, will change. This paper re-evaluates the consequences of applying the torsional provisions of the Uniform Building Code (UBC, 1997) and also the Eurocode (Eurocode 8, 1994) to single mass eccentric systems supported by elements having such characteristics. In conjunction with the results based on the traditional assumption, the effectiveness of the two provisions to mitigate torsional effects is discussed from a broader perspective. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

5.
Seismic building codes include design provisions to account for the torsional effects arising in torsionally unbalanced (asymmetric) buildings. These provisions are based on two alternative analytical procedures for determining the design load for the individual resisting structural elements. A previous study has shown that the linear elastic modal analysis procedure may not lead to conservative designs, even for multistorey buildings with regular asymmetry, when such structures are excited well into the inelastic range of response. The equivalent static force procedure as recommended by codes may also be deficient in accounting for additional ductility demand in the critical stiff-edge elements. This paper addresses the non-conservatism of existing static torsional provisions and examines aspects of element strength distribution and its influence on inelastic torsional effects. A recommendation is made for improving the effectiveness of the code-type static force procedure for torsionally unbalanced multistorey frame buildings with regular asymmetry, leading to a design approach which estimates conservatively the peak ductility demand of edge elements on both sides of the building. The modified approach also retains the simplicity of existing code provisions and results in acceptable levels of additional lateral design strength. It has recently been adopted by the new Australian earthquake code, which is due to be implemented early in 1993.  相似文献   

6.
Discrepancies between the computed and actual values of the structural element stiffness imply that a building with nominally symmetric plan is actually asymmetric to some unknown degree and will undergo torsional vibration when subjected to purely translational ground motion. Such accidental torsion leads to increase in structural element deformations which is shown to be essentially insensitive to the uncoupled lateral vibration period of the system but is affected strongly by the ratio of uncoupled lateral and torsional vibration periods. The structural deformations increase, in the mean, by at most 10 and 5 per cent for R/C and steel buildings, respectively, and by much smaller amounts for a wide range of system parameters. The increase in structural deformations due to stiffness uncertainty is shown to be much smaller than implied by the accidental torsional provisions in the Uniform Building Code and most other building codes.  相似文献   

7.
Based on an asymmetric multistorey frame building model, this paper investigates the influence of a building's higher vibration modes on its inelastic torsional response and evaluates the adequacy of the provisions of current seismic building codes and the modal analysis procedure in accounting for increased ductility demand in frames situated at or near the stiff edge of such buildings. It is concluded that the influence of higher vibration modes on the response of the upper-storey columns of stiff-edge frames increases significantly with the building's fundamental uncoupled lateral period and the magnitude of the stiffness eccentricity. The application of the equivalent static torsional provisions of certain building codes may lead to non-conservative estimates of the peak ductility demand, particularly for structures with large stiffness eccentricity. In these cases, the critical elements are vulnerable to excessive additional ductility demand and, hence, may be subject to significantly more severe structural damage than in corresponding symmetric buildings. It is found that regularly asymmetric buildings excited well into the inelastic range may not be conservatively designed using linear elastic modal analysis theory. Particular caution is required when applying this method to the design of stiff-edge frame elements in highly asymmetric structures.  相似文献   

8.
In past years, seismic response of asymmetric structures has been frequently analysed by means of single-storey models, because of their simplicity and low computational cost. However, it is widely believed that use of more realistic multi-storey models is needed in order to investigate effects of some system characteristics (such as overstrength, higher modes of vibration, etc.) that make behaviour of multi-storey schemes different from that of single-storey systems. This paper examines effects of the overstrength in element cross-sections on the seismic behaviour of multi-storey asymmetric buildings. It is shown that in actual buildings this characteristic, which is sometimes very variable both in plan and along the height of the building, may lead to distributions of ductility demands different from those expected according to the results from single-storey models. Consequently, torsional provisions, which aim at reducing ductility demands of single-storey asymmetric systems to those of the corresponding torsionally balanced systems, should be re-checked in light of the behaviour of realistic multi-storey buildings.  相似文献   

9.
Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

10.
Fluctuations in axial load imposed on a rocking footing will affect its moment capacity, the shape of its moment–rotation hysteresis, and potentially the system's seismic performance. Structural asymmetry increases the likelihood of axial load variation during earthquake excitations. To investigate this issue, a unique centrifuge testing program was carried out on low‐rise frame–wall–rocking foundation systems. In this paper, the seismic behaviors of asymmetric and symmetric models from this test program are systematically compared. Experimental results reveal that placing the lateral force resisting shear wall outboard produces significant axial load fluctuation, which in turn greatly deteriorate the lateral load‐carrying capacity of a foundation rocking dominated frame–wall system, particularly in its weak direction. However, it strengthens the system when loading is towards the shear wall, leading to a highly asymmetric hysteretic response. During earthquake loading, all asymmetric rocking foundation systems observe smaller peak roof accelerations, but larger peak and permanent roof drifts compared with the symmetric systems. Despite these differences in response, the axial load fluctuation and structural asymmetry do not significantly change the relative energy dissipated by the rocking foundations and inelastic structural components within each frame–wall–rocking foundation model. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

11.
The critical parameters that influence the nonlinear seismic response of asymmetric‐plan buildings are identified by evaluating the effects of different asymmetries that may characterize the structure of a building as well as exploring the influence of the ground motion features. First, the main findings reported in the literature on both the linear and nonlinear dynamic response of asymmetric‐plan buildings are presented. The common findings and the conflicting conclusions reached in different investigations are pointed out. Then, the results of comprehensive nonlinear dynamic analyses performed for evaluating the seismic response of systems characterized by different strength and stiffness configurations, representative of a large class of asymmetric‐plan buildings, are reported. Findings from the study indicate that the building response changes when moving from the linear to the nonlinear range, so that the seismic behavior of asymmetric‐plan buildings, apart from the source of asymmetry, can be always classified as irregular. Additionally, it was observed that as the seismic demands cause amplification of system nonlinearity with increasing earthquake intensity, the maximum displacement demand in the different resisting elements tends to be reached with the same deformed configuration of the system. The resultant of the seismic forces producing such a maximum demand is located at the center of resistance and corresponds to the collapse mechanism of the system that provides the maximum lateral strength in the exciting direction of the seismic action. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

12.
Design seismic forces depend on Peak Ground Acceleration (PGA) values and on the shape of Response Spectrum (RS) curves dictated by Building Codes or which need to be evaluated in every particular case. The PGA values and RS curves strictly depend on earthquake magnitude and distance, as well as on the regional and local geological conditions. At present, there is no doubt that it is necessary to construct so-called “Site & Region-specific” Building Code provisions reflecting the influence of different magnitude events at different distances that may occur during the life time of the construction, as well as the variety of local ground conditions. A scheme of Uniform Hazard Response Spectra and PGA estimation considering local site response is described in this paper. The assessments of these design parameters are obtained on the basis of Uniform Hazard Fourier spectra using the conception of “dominant earthquakes”. The effect of local geology is included by means of the soil/reference site spectral ratios.  相似文献   

13.
The accuracy of the three‐dimensional modal pushover analysis (MPA) procedure in estimating seismic demands for unsymmetric‐plan buildings due to two horizontal components of ground motion, simultaneously, is evaluated. Eight low‐and medium‐rise structures were considered. Four intended to represent older buildings were designed according to the 1985 Uniform Building Code, whereas four other designs intended to represent newer buildings were based on the 2006 International Building Code. The median seismic demands for these buildings to 39 two‐component ground motions, scaled to two intensity levels, were computed by MPA and nonlinear response history analysis (RHA), and then compared. Even for these ground motions that deform the buildings significantly into the inelastic range, MPA offers sufficient degree of accuracy. It is demonstrated that PMPA, a variant of the MPA procedure, for nonlinear systems is almost as accurate as the well‐known standard response spectrum analysis procedure is for linear systems. Thus, for practical applications, the PMPA procedure offers an attractive alternative to nonlinear RHA, whereby seismic demands can be estimated directly from the (elastic) design spectrum. In contrast, the nonlinear static procedure specified in the ASCE/SEI 41‐06 Standard is demonstrated to grossly underestimate seismic demands for some of the unsymmetric‐plan buildings considered. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

14.
Asymmetrically yielding single-degree-of-freedom elastoplastic systems are subjected to simulated accelerograms based on El Centro-NS, 1940 ground motion (wide frequency band) to calculate the corresponding ductility demands. Results are compared with those corresponding to simulated accelerograms of the SCT-EW, 1985 Mexico earthquake (narrow frequency band) obtained in a previous work. Results obtained reveal that the characteristics of the excitation influence the response of asymmetrically yielding structures and that the differences found on responses corresponding to both earthquakes are due to frequency content, duration and/or intensity of motion. The effect of the latter concepts is studied using modulating sinusoidal excitations as well as accelerograms recorded on soft and hard soils of Mexico City. Two alternate expressions are proposed to evaluate the increase in ductility demands of structures with asymmetric force-displacement curves with respect to symmetric ones. Those expressions take into account motion intensity and duration, as well as seismic design coefficient.  相似文献   

15.
Regional site conditions relevant for seismic hazard studies can be derived from various geologic, seismologic, and geotechnical sources. In this study, site conditions are derived for the Ankara Basin in Turkey by merging in-situ seismic measurements of dynamic properties, geologic information, and some geotechnical boring information. Field seismic refraction surveys were performed at 259 sites in the project area to classify and characterize Plio–Pleistocene fluvial deposits and Quaternary alluvial and terrace deposits. The shear-wave velocity profiles of the near-surface geologic units are used to characterize site classes according to the International Building Code [International Code Council, ICC. International Building Code. Structural and fire- and life-safety provisions (seismic, wind, accessibility, egress, occupancy and roof codes), 2006. Whittier, CA.] and the Turkish Seismic Code [Ministry of Public Works and Settlement, 1998. Turkish Seismic Code, Specification for Structures to be Built in Disaster Areas, Ankara, Turkey], and to develop a regional model for the average shear-wave velocity in the top 30 m. The resulting maps of site class indicate that the classification system for the Turkish Seismic Code results in a significant portion of the Ankara Basin being classified as Z4, the softest site class. The International Building Code site classification system results in most of the Ankara Basin being classified as D, stiff soil. These differences are caused by the Turkish Seismic Code incorporating information from only the surface layer, while the International Building Code incorporates information from the top 30 m.  相似文献   

16.
结构抗震设计中的强度折减系数研究   总被引：27，自引：12，他引：27  
借助于单自由度弹塑性动力时程分析程序，对延性结构的强度折减系数进行了研究，在统计平均和回归分析的基础上，建立了平均强度折系数的函数形式，本文所建立的平强度折减系数函数，从理论上明确了结构具有延性对弹性地震力的折减关系，研究成果可供结构抗震设计规范采纳应用。  相似文献   

17.
This paper investigates the effects of supplemental viscous damping on the seismic response of one‐storey, asymmetric‐plan systems responding in the inelastic range of behaviour. It was found that addition of the supplemental damping reduces not only deformation demand but also ductility and hysteretic energy dissipation demands on lateral load resisting elements during earthquake loading. However, the level of reduction strongly depends on the plan‐wise distribution of supplemental damping. Nearly optimal reduction in demands on the outermost flexible‐side element, an element generally considered to be the most critical element, was realized when damping was distributed unevenly in the system plan such that the damping eccentricity was equal in magnitude but opposite in algebraic sign to the structural eccentricity of the system. These results are similar to those noted previously for linear elastic systems, indicating that supplemental damping is also effective for systems expected to respond in the inelastic range. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

18.
Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildings. On the other hand, ordinary buildings are commonly analysed via response spectrum analysis following the rules of conventional seismic codes, most of which do not take near-field effects into account. This study evaluates the necessity and the adequacy of near-source factors for ordinary fixed-base buildings that are not specifically classified as tall, by comparing dynamic responses of 3, 8, and 15-story benchmark buildings obtained via(1) linear time history analyses using 220 record components from 13 historical earthquakes and 45 synthetic earthquake records of different magnitudes and fault distances and(2) response spectrum analyses in accordance with the Turkish Earthquake Code 2007-representing seismic codes not taking near-field effects into account- and the Uniform Building Code 1997 which takes near-field effects into account via near-source factors that amplify design response spectrum. It is shown that near-source factors are crucial for the safe design of not-so-tall ordinary fixed-base buildings but those defined in UBC97 may still not be adequate for those located in the vicinity of the fault.  相似文献   

19.
In cities and urban areas, building structures located at close proximities inevitably interact under dynamic loading by direct pounding and indirectly through the underlying soil. Majority of the previous adjacent building pounding studies that have taken the structure–soil–structure interaction (SSSI) problem into account have used simple lumped mass–spring–dashpot models under plane strain conditions. In this research, the problem of SSSI‐included pounding problem of two adjacent symmetric in plan buildings resting on a soft soil profile excited by uniaxial earthquake loadings is investigated. To this end, a series of SSSI models considering one‐directional nonlinear impact elements between adjacent co‐planar stories and using a method for direct finite element modeling of 3D inelastic underlying soil volume has been developed to accurately study the problem. An advanced inelastic structural behavior parameter, the seismic damage index, has been considered in this study as the key nonlinear structural response of adjacent buildings. Based on the results of SSSI and fixed base case analyses presented herein, two main problems are investigated, namely, the minimum building separation distance for pounding prevention and seismic pounding effects on structural damage in adjacent buildings. The final results show that at least three times, the International Building Code 2009 minimum distance for building separation recommended value is required as a clear distance for adjacent symmetric buildings to prevent the occurrence of seismic pounding. At the International Building Code‐recommended distance, adjacent buildings experienced severe seismic pounding and therefore significant variations in storey shear forces and damage indices. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

20.
We present new in situ observations of systematic asymmetry in the pattern of damage expressed by fault zone rocks along sections of the San Andreas, San Jacinto, and Punchbowl faults in southern California. The observed structural asymmetry has consistent manifestations at a fault core scale of millimeters to meters, a fault zone scale of meters to tens of meters and related geomorphologic features. The observed asymmetric signals are in agreement with other geological and geophysical observations of structural asymmetry in a damage zone scale of tens to hundreds of meters. In all of those scales, more damage is found on the side of the fault with faster seismic velocities at seismogenic depths. The observed correlation between the damage asymmetry and local seismic velocity structure is compatible with theoretical predictions associated with preferred propagation direction of earthquake ruptures along faults that separate different crustal blocks. The data are consistent with a preferred northwestward propagation direction for ruptures on all three faults. If our results are supported by additional observations, asymmetry of structural properties determined in field studies can be utilized to infer preferred propagation direction of large earthquake ruptures along a given fault section. The property of a preferred rupture direction can explain anomalous behavior of historic rupture events, and may have profound implications for many aspects of earthquake physics on large faults.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号