共查询到20条相似文献，搜索用时 31 毫秒
1.
循环剪切荷载作用下含二阶起伏体模拟岩石节理力学特性研究 总被引：1，自引：0，他引：1
利用人工材料浇注含二阶起伏体的模拟岩石节理试样,进行常法向荷载循环剪切试验,研究节理剪切力学特性在循环剪切过程中的劣化规律。试验结果表明：二阶起伏体对节理循环剪切力学特性有重要影响,剪切强度、剪切刚度、剪胀角随剪切循环次数增大而衰减,衰减趋势随着二阶起伏度的增大而加快;法向应力、二阶起伏度较大时,二阶起伏体对剪切力学特性的影响主要体现在第1轮剪切循环中,在随后的剪切循环中影响不明显;法向应力、二阶起伏度较小时,二阶起伏体的影响在前几轮循环剪切过程中均有较清晰的体现。基于Hertz接触力学理论,提出了节理面微凸体球面接触细观模型,揭示了节理循环剪切宏观试验现象的力学机制 相似文献
2.
An Elasto-Plastic Constitutive Model for Rock Joints Under Cyclic Loading and Constant Normal Stiffness Conditions 总被引：1，自引：1，他引：0
An elasto-plastic constitutive model is introduced for rock joints under cyclic loading, considering the additional shear resistance generated by the asperity damage in the first forward shear cycle and sliding mechanism for further shearing. A series of cyclic loading direct shear tests was conducted on artificial joints with triangular asperities and replicas of a real rock asperity surface under constant normal stiffness (CNS) conditions. The model was calibrated and then validated using selected data sets from the experimental results. Model simulations were found to be in good agreement with the rock joints behaviour under cyclic loading and CNS conditions both in stress prediction and dilation behaviour. In addition, dynamic stability analysis of an underground structure was carried out, using Universal Distinct Element Code and the proposed constitutive model. 相似文献
3.
为了真实地描述饱和密砂在循环加载过程中的变形行为,需要引入考虑剪胀阶段组构变化的宏观参量。在已有的基于状态参量的本构模型基础上,引入反映组构变化的剪胀内变量,简称组构-剪胀内变量z。以相变线PTL作为参考线,采用基于相变的状态参量判断砂土在初始时刻和任意时刻体积变形的变化趋势,并通过z对剪胀比d的影响,考虑反向加载过程中塑性变形的累积,建立了一个针对饱和密砂的循环加载的弹塑性本构模型。该模型根据试验现象将已有模型中的塑性剪切模量区分为首次加载模量与再加载模量,能较好地模拟排水情况下砂土循环加载的胀-缩变化过程。最后,针对密砂的三轴排水情况,利用文中模型进行预测,并把预测结果与试验结果进行比较,结果表明该模型能够总体反映砂土循环加载的变形行为。 相似文献
4.
5.
Alexandros L. Petalas Yannis F. Dafalias Achilleas G. Papadimitriou 《国际地质力学数值与分析法杂志》2019,43(1):97-123
SANISAND is the name of a family of bounding surface plasticity constitutive models for sand within the framework of critical state theory, which have been able to realistically simulate the sand behavior under conventional monotonic and cyclic loading paths. In order to incorporate the important role of evolving fabric anisotropy, one such model was modified within the framework of the new anisotropic critical state theory and named SANISAND-F model. Yet the response under continuous stress principal axes rotation requires further modification to account for the effect of ensuing noncoaxiality on the dilatancy and plastic modulus. This modification is simpler than what is often proposed in the literature, since it does not incorporate an additional plastic loading mechanism and/or multiple dilatancy and plastic modulus expressions. The new model named SANISAND-FN is presented herein and is validated against published data for loading that includes drained stress principal axes rotation on Toyoura sand. 相似文献
6.
7.
紫坪铺面板坝堆石料颗粒破碎试验研究 总被引：2，自引：0，他引：2
采用大型三轴仪对紫坪铺面板坝堆石料进行了单调和循环荷载下的固结排水剪切试验,研究了不同孔隙比情况下颗粒破碎及剪胀的变化规律。试验表明：（1）单调和循环荷载条件下,堆石料颗粒破碎率与塑性功之间存在一致的双曲线关系;（2）峰值应力处剪胀率与颗粒破碎率在半对数坐标中呈近似线性关系;（3）峰值应力处主应力比与相应的剪胀率呈近似线性关系,且上述结果受初始孔隙比的影响不大。研究成果有助于进一步了解堆石料的颗粒破碎特点,对建立复杂应力条件下考虑颗粒破碎和状态相关性的弹塑性本构模型,分析紫坪铺面板堆石坝汶川地震破损机制是十分有益的。 相似文献
8.
对典型岩石摩擦滑动试验装置进行了改进,以8种硅酸盐岩作为研究对象,在低正应力条件下对岩石摩擦滑动过程中的静摩擦系数进行了试验研究。对滑动表面形貌进行了表征,从统计学角度分析了粗糙度对静摩擦系数的影响,并基于滑动表面微凸体（凹凸体、微观粗糙度）对这一影响作进一步分析。研究表明：滑动面为抛光面时,千枚岩、石英岩、岩屑砂岩和石英砂岩的静摩擦系数为0.38～0.47,砾岩、含砾粗粒石英砂岩、中粒岩屑砂岩和中粒石英砂岩的静摩擦系数为0.83～1.07;在粗糙度中,轮廓最大谷深Rm和轮廓最大峰高Rp两个参数导致摩擦滑动中产生不同静摩擦系数,且随着这两个参数的增加,静摩擦系数呈指数规律增加;千枚岩、石英岩、岩屑砂岩和石英砂岩滑动表面的微凸体数量较少,砾岩、含砾粗粒石英砂岩、中粒岩屑砂岩和中粒石英砂岩滑动表面的微凸体数量较多,随着微凸体数量的增加岩石摩擦滑动过程中的静摩擦系数增加。 相似文献
9.
The paper considers a plane joint or interface element suitable for implementation into a standard non-linear finite element code. The element is intended to model discontinuities with rough contact surfaces, such as rock joints, where dilatant behaviour is present. Of particular concern is the formulation of a constitutive model which fully caters for all possible histories of opening, closing and sliding (accompained by dilation or contraction) in any direction. The non-linear incremental constitutive equations are formulated in a manner appropriate for a back-ward difference discretization in time along the path of loading. The advantage of such an approach is that no essential distinction need be drawn between opening, closing and sliding. Further, a convenient formulation of the constitutive equations is facilitated by representing the different contact conditions in relative displacement space. The state diagram in relative displacement space, however, changes from one time step to the next, and evolution equations for the updating must be formulated. These concepts are illustrated for two rock-joint models: a sawtooth asperity model and a limited dilation model. The models are based on a penalty formulation to enforce the contact constraints, and explicit equations for the tangent stiffness matrix and for the corrector step of the standard Newton–Raphson iterative algorithm are derived. These equations have been implemented as an user element into the finite element code ABAQUS7. Three examples are presented to illustrate the predictions of the formulation. 相似文献
10.
基于临界状态土力学框架,建立了一个适用于往返循环荷载作用的砂土边界面本构模型。采用无纯弹性域假设,认为受到反向荷载的瞬时土体就产生塑性变形,砂土的弹性区域退化为一个点。屈服面为倒子弹头型,由于砂土孔隙比与压力之间不存在惟一对应的关系,使得屈服面大小无法与体积应变直接耦合,故采用塑性偏应变而不是剑桥模型那种塑性体应变作为硬化参数。流动法则采用加入状态参数的修正的Rowe应力剪胀关系,体现了依赖状态的剪胀思想。屈服面大小的比值 反映了塑性模量的演化,并推导了 的表达式。只用1套参数,该模型就能合理地模拟砂土在不同密度和固结压力下循环荷载的应力-应变关系曲线。 相似文献
11.
Liquefaction is associated with the loss of mean effective stress and increase of the pore water pressure in saturated granular materials due to their contractive tendency under cyclic shear loading. The loss of mean effective stress is linked to loss of grain contacts, bringing the granular material to a “semifluidized state” and leading to development and accumulation of large cyclic shear strains. Constitutive modeling of the cyclic stress-strain response in earthquake-induced liquefaction and post-liquefaction is complex and yet very important for stress-deformation and performance-based analysis of sand deposits. A new state internal variable named strain liquefaction factor is introduced that evolves at low mean effective stresses, and its constitutive role is to reduce the plastic shear stiffness and dilatancy while maintaining the same plastic volumetric strain rate in the semifluidized state. This new constitutive ingredient is added to an existing critical state compatible, bounding surface plasticity reference model, that is well established for constitutive modeling of cyclic response of sands in the pre-liquefaction state. The roles of the key components of the proposed formulation are examined in a series of sensitivity analyses. Their combined effects in improving the performance of the reference model are examined by simulating undrained cyclic simple shear tests on Ottawa sand, with focus on reproducing the increasing shear strain amplitude as well as its saturation in the post-liquefaction response. 相似文献
12.
A new constitutive law for the behaviour of undrained sand subjected to dynamic loading is presented. The proposed model works for small and large strain ranges and incorporates contractive and dilative properties of the sand into the unified numerical scheme. These features allow to correctly predict liquefaction and cyclic mobility phenomena for different initial relative densities of the soil. The model has been calibrated as an element test, by using cyclic simple shear data reported in the literature. For the contractive sand behaviour a well‐known endochronic densification model has been used, whereas a plastic model with a new non‐associative flow rule is applied when the sand tends to dilate. Both dilatancy and flow rule are based on a new state parameter, associated to the stiffness degradation of the material as the shaking goes on. Also, the function that represents the rearrangement memory of the soil takes a zero value when the material dilates, in order to easily model the change in the internal structure. Proceeding along this kind of approach, liquefaction and cyclic mobility are modelled with the same constitutive law, within the framework of a bi‐dimensional FEM coupled algorithm developed in the paper. For calibration purposes, the behaviour of the soil in a cyclic simple shear test has been simulated, in order to estimate the influence of permeability, frequency of loading, and homogeneity of the shear stress field on the laboratory data. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
13.
A new finite-volume solver named “geotechFoam” is developed within OpenFOAM®1 for modelling soil-structure-interaction for marine gravity structures. The fully-coupled and fully-dynamic Biot’s governing equations are solved in a segregated approach. Two simplifications of the governing equations are introduced and tested. The spatial domain is composed of several zones with different material properties and/or constitutive models. A multi-yield surface plasticity model is implemented to simulate soil response under cyclic loads. Moreover, soil-structure interaction is modelled via a frictional contact model and boundary conditions accounting for skeleton-pore fluid coupling. Five benchmark cases and two sets of physical model tests are applied for the validation. 相似文献
14.
This work deals with the development of a constitutive law for fractured rocks. Fractures are considered as penny‐shaped inclusions, whose constitutive law is deduced from an interface law and a regularization procedure. Such a method is applied to linear and non‐linear interface behaviours in order to reproduce effects such as an increase in stiffness during fracture closing, dilatancy or asperity surface degradation. Then, considering the fractured rock as a composite material, we use a Mori–Tanaka method to estimate the homogenized properties of the rock. Numerical experiments illustrate the interest of the proposed homogenization procedure. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
15.
This paper presents a joint constitutive model that considers separately the mechanical contribution of waviness and unevenness of a joint to shear behaviour. The critical asperities for waviness and unevenness are determined from geometric properties in a lab-scale joint. The wear process is employed to model the degradation in dilation and strength during shear. From dimensional analysis, asperity degradation constants are developed using geometric parameters including asperity angle, wavelength, and amplitude as well as rock strength and stress. The applicability of the proposed model was assessed by performing direct shear tests on three joint roughness coefficient (JRC) profiles and providing its correlation with experimental results. Additionally, experimental data taken from literature were used to validate the model’s performance. 相似文献
16.
In this paper, the application of an efficient, transparent and accurate kinematic-cyclic constitutive model based on the fuzzy-set concepts and incremental plasticity theory is presented to show its capability in modeling cyclic mobility of saturated granular soil. The nature and kinematic mechanism of the membership functions in the fuzzy-set constitutive model are illustrated. The model’s capability of modeling soil dilatancy is investigated. Important features of volume change and pore water pressure build-up related to soil cyclic mobility are captured. The formulation of the proposed model is relatively simple and it can be readily implemented in finite element codes. The enhanced fuzzy-set model is capable of simulating ground motion problems particularly related to cyclic mobility, soil liquefaction, and spreading behavior. 相似文献
17.
Manuela Cecconi Antonio DeSimone Claudio Tamagnini Giulia M.B. Viggiani 《国际地质力学数值与分析法杂志》2002,26(15):1531-1560
A constitutive model for granular materials is developed within the framework of strain–hardening elastoplasticity, aiming at describing some of the macroscopic effects of the degradation processes associated with grain crushing. The central assumption of the paper is that, upon loading, the frictional properties of the material are modified as a consequence of the changes in grain size distribution. The effects of these irreversible microscopic processes are described macroscopically as accumulated plastic strain. Plastic strain drives the evolution of internal variables which model phenomenologically the changes of mechanical properties induced by grain crushing by controlling the geometry of the yield locus and the direction of plastic flow. An application of the model to Pozzolana Nera is presented. The stress–dilatancy relationship observed for this material is used as a guidance for the formulation of hardening laws. One of the salient features of the proposed model is its capability of reproducing the stress–dilatancy behaviour observed in Pozzolana Nera, for which the minimum value of dilatancy always follows the maximum stress ratio experienced by the material. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
18.
Mazouz El Hadi Hamimed Messaoud Yahiaoui Abdelouahab Benzagouta Mohamed Said Khodja Mohamed Achi Nada Duplay Joëlle 《Arabian Journal of Geosciences》2020,13(9):1-11
The creep property of rock under cyclic loading is very important in civil engineering. In order to establish a novel constitutive equation for rock under cyclic loading, a fractional-order viscoplastic body under cyclic loading was constructed based on fractional-order viscous element. A fractional-order visco-elastoplastic model (FVEPM) for rock was established by connecting constructed fractional-order viscoplastic body with Burgers model. The model was a Burgers model when the maximum value of cyclic loading was less than the critical strength of rock; otherwise, it was a FVEPM which can be used to reflect the transient, steady-state, and tertiary creep phases of rock. The cyclic loading was decomposed into a static load and a cyclic loading with a zero average stress. According to rheological mechanics theory, the rheology constitutive equation of rock under the static load can be derived. According to viscoelastic mechanics theory, the constitutive equation under cyclic loading with a zero average stress was established by introducing the variation parameters of energy storage and energy dissipation compliance caused by rock damage and fracture. Finally, a new dynamic constitutive equation of rock cyclic loading can be obtained by superimposing the constitutive equation under static load and cyclic loading with a zero average stress. Compared with existing test results of rock under cyclic loading, the proposed constitutive model can be used to describe the creep characteristics of rock under cyclic loading and reflect the presented fluctuation of strain curve of rock under cyclic loading. 相似文献
19.
Macroscopic frictional behavior of granular materials is of great importance for studying several complex problems associated with fault slip and landslides. The main objective of this study is to model the macroscale frictional behavior of granular soils under monotonic and cyclic loadings based upon micromechanical determination of dissipated energy at particle contacts. This study is built on the general observation that the externally computed energy dissipation should be equal to the total internal energy dissipation derived from inter-particle sliding and rolling, energy losses from inter-particle collisions, and damping. For this purpose, the discrete element method is used to model a granular soil and determine the stored, dissipated, and damping energies associated with shear loading for applied monotonic and cyclic velocities. These energies are then related to the friction by an application of the Taylor-critical state power balance relationship. Also, the contributions of the different modes of energy dissipation (normal, shear, and rolling) to the total frictional resistance were studied. By changing the inter-particle friction, the simulations showed that the macroscopic friction was nearly constant, the slip friction increased almost linearly with increasing inter-particle friction, and the difference between the two was attributed to the non-energy dissipating dilatancy component. By providing a clear relationship between energy dissipated by micro-scale mechanisms versus the traditional engineering definition based on macro-scale (continuum) parameters, this study provides a means to develop a better understanding for the frictional behavior of granular media.
相似文献20.
In quasi‐brittle material the complex process of decohesion between particles in microcracks and localization of the displacement field into macrocracks is limited to a narrow fracture zone, and it is often modelled with cohesive crack models. Since the anisotropic nature of the decohesion process in separation and sliding is essential, it is particularly focused in this paper. Moreover, for cyclic and dynamic loading the unloading, load reversal (including crack closure) and rate dependency are essential features that are included in a new model. The modelling of degradation is based on a ‘localized’ version of anisotropic continuum damage coupled to inelasticity. The concept of strain energy equivalence between the states in the effective and nominal settings is adopted in order to define the free energy of the interface. The proposed fracture criterion is of the Mohr type, with a smooth transition of the failure and kinematics (slip and dilatation) characteristics between tension and shear. The chosen potential, of the Lemaitre‐type, for evolution of the dissipative processes is additively decomposed into plastic and damage parts, and non‐associative constitutive equations are obtained. The constitutive equations are integrated by applying the backward Euler rule and by using Newton iteration. The proposed model is assessed analytically and numerically and a typical calibration procedure for concrete is proposed. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献