共查询到19条相似文献，搜索用时 62 毫秒
1.
南天山榆树沟麻粒岩相构造岩研究 总被引：11，自引：4，他引：7
榆树沟麻粒岩相构造岩宏观上呈糜棱岩带和糜棱岩化带产出,发育强烈流变叶理;微观上主要造岩矿物发育各种塑性变形显微构造。变形过程中同种造岩矿物的动态重结晶新晶与塑变残斑（残晶） 之间化学成分变化不明显, 表明在变形期间水活度低,以位错蠕变为主。该构造岩形成于深地壳麻粒岩相变质的晚期阶段,是地体在早期阶段于下地壳底部－上地幔顶部发生高压麻粒岩相变质作用后因构造抬升进入深地壳麻粒岩相环境下发生退变质和强烈韧性剪切变形的产物, 其形成后经历了快速的构造折返过程。 相似文献
2.
对四套具不同特点的方解石质原岩断层构造岩应用光学显微镜、透射电子显微镜和阴极发光显微镜开展了系统研究。它们都表现出相似的变形显微构造特点与变形作用,宏观碎裂结构与微观糜棱状结构。碎屑颗粒或者变形的原岩颗粒具有发育的晶内变形显微构造(变形双晶、扭折和微破裂等),基质颗粒为弥散的极细粒物质。透射电镜下的微构造表现为反映脆性变形与晶质塑性变形共存的位错 相似文献
3.
喜马拉雅造山带中段麻粒岩绝大多数呈透镜状、布丁体等弱应变域断续产出,强应变带围岩往往发育糜棱面理和构造片理。部分麻粒岩经历了强烈的韧性剪切构造变形,形成剪切透镜体,并且明显受韧性剪切带控制,显示成带分布、局部集中的特点。根据矿物组合可将产出的麻粒岩分为4种麻粒岩,其主要组成矿物如斜方辉石、单斜辉石、斜长石、角闪石以及石榴石等均不同程度地发生扭折、压扁、拉长扭曲、亚颗粒化及边缘强烈动态重结晶等强烈塑性显微构造变形特征。研究分析表明,麻粒岩的产出与重熔花岗岩的侵位及藏南伸展拆离断层活动有关,在喜马拉雅造山带强烈伸展快速抬升造山的绝热降压大陆动力学过程中,下地壳基性麻粒岩以较快的速率上升到地表,而下地壳层流作用、造山带伸展-隆升-造山导致麻粒岩相变质作用。 相似文献
4.
翡翠的显微构造是矿物在应力作用下发生脆性或塑性变形产生的各种变形形迹。常见的显微构造有显微裂隙、波状消光、带状消光、扭折带、变形纹、机械双晶、镶嵌构造、核幔构造及出溶条纹等。它们有着不同的特征。反映了不同的形成条件,涉及到不同的变形机制。 相似文献
5.
6.
阿尔泰造山带的剪切带中发育大量S-C糜棱岩,其内云母产生云母鱼和扭折构造并发生边界重结晶。长石发生不同性质的系列变形,并以出熔成核为主的动态重结晶为主要变形机制,同时伴有强烈的扩散作用,属Naborrow-Herring蠕变。石英的变形呈条带状并发生完全的旋转和边界迁移动态重结晶。石英晶内变形以位错运动和动态恢复为主,形成亚颗粒构造及动态重结晶,以致产生应变弱化和超塑性变形,定量分析确定的石英变形机制主要为低温幂指数蠕变。 相似文献
7.
胶东新城金矿床控矿构造变形环境：显微构造和EBSD组构约束 总被引：3，自引：3，他引：0
新城金矿床是典型的"焦家式"破碎带蚀变岩型金矿,矿体形态和规模都严格受到断裂破碎带控制,是探讨复杂构造-流体耦合成矿系统控矿构造变形环境研究的理想选区。断裂破碎带中构造岩既是构造变形行为的载体,也是相应变形环境的受体。论文在新城金矿详细露头构造解析的基础上,系统采集该矿床控矿断裂破碎带定向构造岩样品,进行显微构造和EBSD组构分析。研究区构造岩显微构造特征主要表现为韧性变形和脆性变形。韧性变形有波状消光、带状消光、亚晶粒、动态重结晶、核幔构造、丝带构造、碎(残)斑系、扭折带、变形纹、机械双晶、蠕英结构、云母鱼等;脆性变形有书斜构造和显微裂隙等。长石(残)斑系、扭折带、变形纹、蠕英结构和石英颗粒边界迁移动态重结晶、丝带构造等矿物变形特征表明断裂带成矿前以高温韧性变形为主;石英波状消光、亚晶粒、亚颗粒旋转和膨凸动态重结晶、方解石机械双晶、长石显微裂隙充填物等矿物变形反映成矿期兼有中低温韧性变形和脆性变形;压剪性穿晶裂隙则反映出成矿后主要是低温脆性变形。根据差应力、应变测量和EBSD组构分析,将新城金矿床控矿构造变形环境可以分为3个构造期:成矿前在NW-SE向挤压作用下发生韧-脆性左行剪切变形,600~700℃,差应力61.37~111.09MPa,应变测量轴比a/c为2.295~3.978,动态重结晶石英颗粒边界分维值为1.466~1.599,反映矿区为高温中高压高应变带变形环境,应变速率较大;成矿期为NW-SE向逐渐NEE-SWW向转变的挤压作用,发生压剪性脆性变形,200~500℃,差应力65.91~135.68MPa,应变测量轴比a/c为1.403~2.204,动态重结晶石英颗粒边界分维值为1.321~1.378,反映矿区成矿期为中低温中高压低应变带变形环境,反应速率较小;成矿后在NWW-SEE向挤压作用下发生压剪变形,150~300℃,反映低温低压脆性变形环境。 相似文献
8.
对新疆北部南天山北缘蛇绿混杂岩带中麻粒岩的岩石学、矿物学、岩石化学、矿物化学、稀土元素地球化学特征及辉石相韧性变形构造的研究表明,榆树沟麻粒岩的共生矿物组合为透辉石-次透辉石-紫苏辉石-石榴石-斜长石,属基性岩类暗色麻粒岩,以低硅高钙为特征,稀土总量低,轻稀土与铕弱亏损,反映高温高压熔融环境和岩浆分异差的特点。麻粒岩及超镁铁岩中的辉石经历了强烈的韧性剪切变形作用,不对称辉石残斑系、动态重结晶辉石亚颗粒集合体、辉石变形双晶纹、鱼尾构造、核幔构造等显微韧变构造广泛发育。宏观和微观运动学分析揭示了一期从南向北的推覆构造。麻粒岩的形成与早古生代大陆地壳拉伸作用有关,辉石相韧性变形则与早古生代末南天山边缘海的挤压关闭和推覆逆冲有关。 相似文献
9.
构造岩中的变形机制有三种类型：物质扩散迁移、晶体塑性变形和粒间摩擦滑移作用和破裂作用。它们形成的变形结构有：磨蚀边结构、山羊须结构、雪球结构、显微石香肠、残斑旋转、压力影、分结条带、拨丝结构、变形纹，变形条带、机械双晶、显微膝折、亚晶粒、核幔结构、剪切阶步、云母鱼和矩形边等。它们对研究变形作用与变质作用的关系，对揭示构造变形的演化历史和确定变形环境具有重要意义。 相似文献
10.
研究表明鞍山-本溪地区前寒武纪铁建造中的阳起石经受了褶皱或剪切变形作用,在相当于绿片岩相的温压条件下可形成波状消光,(001)裂理,扭折、机械双晶,重结晶等显微构造.由裂理及扭折带推导的一组滑移系为(001)[100],扭折造成的机械双晶具有S=0.57的剪切值,其双晶系统为(100)[001]. 相似文献
11.
洛南-栾川断裂带是秦岭造山带中一条著名的断裂带,是华北板块与秦岭造山带的地质分界线,其走向近东西,断裂带发育有宽坪岩群和陶湾岩群等岩石,洛南-栾川断裂带的构造作用过程及其演化对这些岩石的变形起了重要作用。因此,分析断裂带岩石的变形特征及其形成条件对于探讨洛南-栾川断裂带的构造环境以及分析古板块汇聚边界变形有重要意义。本文以洛南-栾川断裂带栾川段为主要研究对象,通过室内外变形研究及多种测试分析,认为洛南-栾川断裂带基本走向为290°,倾角为58°～89°,糜棱面理、矿物生长线理和褶皱普遍发育,具有由南向北的俯冲兼有左行平移的运动学特征。断裂带内岩石变形强烈,变形矿物主要为石英、方解石、黑云母和白云母。变形机制：石英以膨凸式和亚颗粒旋转动态重结晶为主,方解石以机械双晶和亚颗粒旋转变形为主,云母变形以应变滑劈理为主。在宽坪岩群北侧和陶湾岩群南侧主要为塑性变形,在陶湾岩群北侧主要为脆性变形。分别对应于洛南-栾川断裂带第2期由南向北的俯冲走滑构造活动和第4期由北向南的脆性逆冲推覆构造活动。通过方解石机械双晶、多硅白云母压力计、黑白云母Ti温度计、斜长角闪温度计等方法分别对洛南-栾川断裂带（栾川段）的形成环境进行了分析,得到矿物变形温度为440℃～509℃, 压力为0.4～1.4 GPa, 差异应力为0.27～0.426 GPa, 即韧性剪切带的形成环境属中温、中压条件。因此,本文认为洛南-栾川断裂带（栾川段）变形环境为中温、中压,相当于地壳浅层的构造变形环境。 相似文献
12.
陕西镇安金龙山矿区构造演化及剪切带对金矿的控制作用 总被引：2，自引：0，他引：2
作者着重阐析了金龙山矿区变形发展４个阶段的几何学特征及变形机制，指出变形期对应于３个成矿期次。在对先存层状岩石的褶皱剪切带特征及序列进行了分析后，对由韧性剪切变形到脆性剪切变形过程中产生的金矿床进行了构造类型划分。 相似文献
13.
上海三维形变监测GPS试验网的建立 总被引：2，自引：0，他引：2
本文结合上海三维形变ＧＰＳ试验网的建立、探讨了应用ＧＰＳ建立高精度控制制的有关问题。结果表明，采用仪器墩强制对中、天线指比、观测时间超过３小时，测得的长度不超过４ｋｍ的基线，有望达到毫米级的精度。 相似文献
14.
Yakov M. Reznik 《Engineering Geology》1998,50(3-4):319-327
Footing settlements depend not only on physical and mechanical properties of base soils, but also on applied load intensities and their distributions with depth, as well as on footing rigidity, shape and dimensions. An analytical expression relating rigid bearing plate and/or footing settlements to thicknesses of deformation (active) zones, which form below footing bottoms, has been previously offered by the author. The results of tests performed with 0.5, 1.0 and 4.0 m2-area square footings, constructed on undisturbed clayey soils and containing data describing active zone development, were collected from literature and analyzed. This paper presents graphical relationships between square footing settlements, active zone thicknesses and footing dimensions, which are verified by published test results performed with experimental square footings, having areas different than the ones selected for statistical analyses. 相似文献
15.
蠕虫状灰岩特征和成因新探 总被引：5，自引：0，他引：5
下扬子地区下三叠统中广泛分布着一种外貌独特的灰岩——蠕虫状灰岩,这种灰岩出现在该区深水和浅水的多种环境中,具有灰泥结构和粒泥(或泥粒)结构;斜层理、生物扰动构造和压扁透镜状构造。蠕虫状灰岩是多成因的,各成因之间有着一定的联系,其中,先期形成的可被后期形成的叠加和改造。沉积作用、沉积分异作用是形成蠕虫状灰岩的一个重要前提,而生物扰动作用、水流作用和压实、压溶作用则是形成各种蠕虫状灰岩的关键。 相似文献
16.
S. Mazzoli 《International Journal of Earth Sciences》1995,84(4):781-793
Analysis of strain in Jurassic argillites forming part of the folded and thrusted sedimentary succession of the Lagonegro basin (southern Italian Apennines) has been carried out using ellipsoid-shaped reduction spots as strain markers. Most of the determined finite strain ellipsoids are of oblate type and show a peculiar distribution of the maximum extension direction (X), with maxima either subparallel or subperpendicular to the local fold axes. Using the strain matrix method, two different deformation histories have been considered to assist the interpretation of the observed finite strain pattern. A first deformation history involved vertical compaction followed by horizontal shortening (occurring by a combination of true tectonic strain and volume loss), whereby all strain is coaxial and there is no change in the intermediate axis of the strain ellipsoid. By this type of deformation sequence, which produces a deformation path where total strain moves from the oblate to the prolate strain field and back to the oblate field, prolate strain ellipsoids can be generated and may be recorded where tectonic deformation has not been large enough to reverse pretectonic compaction. This type of deformation history may be of local importance within the study area (i.e. it may characterize some fold hinge regions) and, more generally, is probably of limited occurrence in deformed pelitic rocks. A second deformation sequence considered the superposition of pre-tectonic compaction and tectonic strain consisting of initial layer-parallel shortening followed by layer-parallel shear (related to flexural folding). Also in this instance, volume change during tectonic deformation and tectonic plane strain have been assumed. For geologically reasonable amounts of volume loss due to compaction and of initial layer-parallel shortening, this type of deformation history is capable of producing a deformation path entirely lying within the oblate strain field, but still characterized by a changeover, during deformation, of the maximum extension axis (X) from a position parallel to the fold axis to one perpendicular to it. This type of deformation sequence may explain the main strain features observed in the study area, where most of the measured finite strain ellipsoids, determined from the limb regions of flexural folds, display an oblate shape, irrespective of the orientation of their maximum extension direction (X) with respect to the local structural trends. More generally, this type of deformation history provides a mechanism to account for the predominance of oblate strains in deformed pelitic rocks. 相似文献
17.
Structural vergence within the Western Subprovince of the Lachlan Fold Belt is towards the hinterland rather than the foreland, in contrast to many well-known orogenic belts. High angle-reverse faults and upright folds verge eastwards, away from the Australian craton, towards the inferred centre of orogenic and magmatic activity. We designed a series of analogue models to test the anomalous vergence in the western Lachlan Fold Belt, particularly the interaction of a stable Australian craton with Tasman Line geometry, interacting with weaker oceanic or transitional lithospheric material. We found consistently that vergence direction in the models was towards the hinterland, not the foreland, as in the western Lachlan Fold Belt, irrespective of the way the model was deformed. Strength gradients between the oceanic and cratonic lithosphere control the deformation patterns. An important result of the models is that they demonstrate that fold belts with different vergences can be generated without the requirement of subducting oceanic lithosphere. 相似文献
18.
19.
塔里木盆地东部的志留系为一套海相碎屑岩沉积,现今仅保存有下志留统,分布在铁南2井、维马1井以南、阿南1井以北的东西向狭长地带内。下志留统的下砂岩段是油气勘探的主要目的层之一,发育扇三角洲沉积体系。下砂岩段储层岩性为岩屑砂岩,储集空间类型主要为剩余原生粒间孔,压实作用是影响储层物性的主要因素。在下砂岩段储层中,中砂岩的储集性能相对较好,其孔隙度多数在10%以上,是下砂岩段的主要含油气储层。后期的成岩作用改善了局部层段的储层物性。经历了漫长的地质演化后,下砂岩段依然保存有物性条件较好的储层段,可能蕴涵了商业油气储量。 相似文献