共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
根据1997年10月和1998年5月2次围隔生态系实验中获得的叶绿素a资料，分析了在富磷围隔实验中不同粒径叶绿素a的变化及各自所占的百分比以及油污染对叶绿素a变化的影响。实验结果表明：在P－meso中，10月份Chl-a的含量每天以10－16μg/L的速度呈指数生长，最高达到74．89μg/L，大于20μm的大型浮游植物是浮游植物总生物量的主要贡献者。5月份Chl-a含量在加磷后增长的速度每天为3－8μg/L，较10月份慢，2－20μm和GF／F－2μm的小型和微型浮游植物是浮游植物总生物量的主要贡献者。 相似文献
3.
海水中的磷以三种形式存在:颗粒磷(POP)(生命有机体内的磷和有机碎屑的磷)、溶解有机磷(DOP)和溶解无机磷(DIP)。浮游植物不仅可以吸收溶解无机磷,一些种类还可以吸收溶解有机磷[1];不同粒径的浮游植物对磷酸盐的吸收能力也有所不同,单位叶绿素a的浮游植物对磷酸盐的吸收速率:0.2~3μm浮游植物的吸收速率最大,3~20μm浮游植物的居中,20~200μm浮游植物的最小[2]。磷进入浮游植物以后,又因浮游动物的摄食沿着两条不同的途径向更高的营养级传递。 相似文献
4.
虾病暴发前虾池中一些环境因子的变化 总被引：2，自引：1，他引：1
实验研究１９９４年５～８月即墨金口养殖场虾病发生前,养虾池中叶绿素ａ总量、去镁叶绿素含量、不同粒径浮游植物叶绿素ａ含量以及营养盐的变化。结果表明：在整个调查期间两个养虾池中叶绿素ａ含量逐月减小,分别从４９．９８ｍｇ／ｍ３和２５．５４ｍｇ／ｍ３降至１．５０ｍｇ／ｍ３和３．３０ｍｇ／ｍ３,去镁叶绿素含量呈上升趋势。微型（２～２０μｍ）的浮游植物叶绿素ａ含量最大,分别为７４．３％和６８．４％,超微型（２～０．４５μｍ）分别为２０．４％和２７．５％,小型（＞２０μｍ）的叶绿素ａ含量最小,分别为５．５％和４．２％。所调查虾池中无机磷含量均超过富营养化阈限,无机氮含量接近富营养化阈限。 相似文献
5.
超微型浮游植物是海洋中重要的初级生产者,浮游植物吸收的光一部分用于光合作用,另一部分以荧光或热的形式耗散.本文利用调制叶绿素荧光仪（Pulse-Amplitude-Modulation,PAM）测定2株海洋超微型真核藻：细小微胞藻（Micromonas pusilla）和梨形脂金藻（Pinguiochrysis pyriformis）在不同光强下的叶绿素荧光和快速光曲线.结果表明细小微胞藻和梨形脂金藻在不同光强下的光系统II（PS II）的最大光量子产量（Fv/Fm）分别为0.572-0.634和0.624-0.426;最大相对电子传递速率（rETRmax）分别为61.58-163.56和76.69-143.17μmol/m2·s-1;半饱和光强（Ik）分别为212.37-946.00和307.44-671.28μmol·m-2·s-1;光能利用效率（α）分别为0.29-0.17和0.25-0.21.细小微胞藻和梨形脂金藻分别属于高光型和低光型的超微型浮游植物,光照条件会显著影响超微型浮游植物的光合特性,但不同类型的超微型浮游植物的光合特性对光的响应存在差异. 相似文献
6.
用乙炔抑制法和最大或然数（most probable number,MPN）法对黄海北部海域沉积物反硝化速率及反硝化细菌数量的季节变化进行了研究,结果表明,该海域反硝化速率在夏季最大,范围在3．2～7．5μmol／（m^2·h）之间,平均值为4．85μmol／（m^2·h）;而在春、秋季其范围分别为0．26～2．65μmol／（m^2·h）和1．21～4．12μmol／（m^2·h）。该研究海域3个季节反硝化细菌数量差别较大,春、夏、秋季分别在1．78×10^4～8．12×10^4,1．18×10^6～6．18×10^6和0．72×10^5～4．50×10^5个／g之间。春、秋两季反硝化速率和反硝化细菌数量之间呈显著性正相关,相关系数分别为0．759和0．750（P〈0．05）。本结果可为黄海北部海域氮循环机制研究提供重要参考。 相似文献
7.
据2007年春季在南海西北部陆架区海域进行的网采浮游植物调查数据,分析了浮游植物群落的结构特征．此次共鉴定出浮游植物4门318种,其中硅藻类183种,甲藻类128种,蓝藻类5种,金藻类2种．大部分海域浮游植物种类数在40～70种之间,外海区域的种类数稍高于沿岸．浮游植物密度的变化范围为0．22×10。～3683．85×10。eells／m’,平均值（标准偏差）为97．49×10。（±437．38×10。）cel｜s／m。．其高值区主要位于粤西近岸海域,向外海呈递减趋势．调查海域硅藻类的平均密度（标准偏差）最高,为93．82×10。（±434．34×10。）cells／m’;甲藻类的次之,为3．65×10。（±9．08×10。）cells／m’．浮游植物优势种主要有拟旋链角毛藻（Chaetocerospseudocurvisetus）、细弱海链藻（Thalassiosirasubtilis）、中肋骨条藻（Skeletonemacostatum）、劳氏角毛藻（Chaetocerosloren—zianus）和菱形海线藻（Thalassionemanitzschioides）．该调查海域浮游植物多样性指数的变化范围为1．48～6．23,平均值（标准偏差）为4．70（±1．03）,其分布趋势与浮游植物密度的分布趋势大致相反．将站位依等深线划分为粤西近岸海区、琼东南近岸海区和外海海区,应用非度量多维标度（nMDS）和聚类分析法分析这3个海区的浮游植物群落结构差异,并通过ANOSIM和SIMPER进行检验．结果表明3个海区之间浮游植物群落结构具有显著性差异,且粤西近岸海区与外海海区之间差异性较高．近岸种拟旋链角毛藻和中肋骨条藻在粤西近岸海区为最主要的优势种,而外海海区优势种较多,且大部分为大洋暖水性种类． 相似文献
8.
象山港中、西部秋季浮游植物粒径分级、叶绿素a和初级生产力 总被引：1，自引：0，他引：1
１９９４年１０月结合水色遥感光谱实验,对象山港中、西部浮游植物细胞丰度、优势种类、叶绿素ａ浓度和初级生产力的分布做了现场观测。表层水中共鉴定出浮游植物２４种,隶属３门１７属,细胞丰度为１．０５×１０４±１．１４×１０４个／ｄｍ３;叶绿素ａ浓度为１．０７±０．５９μｇ／ｄｍ３,潜在初级生产力为３．８６±３．６０ｍｇＣ／（ｍ３·ｈ）。港区西部的浮游植物细胞丰度、叶绿素ａ浓度和初级生产力均高于港区中部;表层叶绿素ａ浓度高于中层和底层。浮游植物细胞粒径分级结果表明,微型和微微型浮游植物细胞（＜２０μｍ）对总叶绿素ａ的贡献占８６％,对初级生产力的贡献占８９％;小型浮游植物细胞（＞２０μｍ）对总叶绿素ａ的贡献占１４％,对初级生产力的贡献占１１％。 相似文献
9.
讨论了中国第六次南大洋考察4条断面1个海湾计30个剖面海水中碘的赋存形式及化学形态的生物地球化学分布。结果表明，表层海水总无机碘含量分有值在0．267－0．443μmol／dm3之间；海水无机碘及碘酸根含量的垂直分布与营养盐关系密切，溶解有机碘分布则较稳定，其含量约为总无机碘的10％。真光层内浮游植物对碘的吸收同化速率为0．17μmol／（m2·d），悬浮有机颗粒中碘的结合量约为4．3μmol／m3，真光层内颗粒碘的下沉速率大于7．2d／m。根据讨论结果提出了测区真光层内碘循环的生物地球化学模式。 相似文献
10.
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
13.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
14.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
15.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
16.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.