首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Physicochemical factors of formation of Au-As,Au-Sb,and Ag-Sb deposits   总被引：1，自引：0，他引：1  
The physicochemical formation conditions of Au-As, Au-Sb, and Ag-Sb ores characterized by similar paragenetic mineral assemblages and sets of major ore elements but differing in their proportions have been studied. The composition of the solutions filling fluid inclusions in minerals of Au-Sb deposits, combined with mineralogical and geochemical data, indicates that these deposits were formed from a near-neutral to alkalescent chloride-sulfide (<5 wt % NaCl) solution. Au-As and Au-Sb deposits were formed from fluids of the same type, consisting of a predominately CO2-CH4 gas phase with N2 and a low-saline chloride-sulfide solution, where Au and Ag were predominantly transported as dihydrosulfide species and Sb as sulfide and hydroxy complexes. Superimposed minerals of the sulfide-sulfosalt stage that precipitated from chloride-rich solutions (up to 30 wt % NaCl equiv), which contained Ca and Fe chlorides in addition to NaCl, are identified at some Au-Sb deposits. These solutions are similar in composition to the ore-forming fluids of Ag-Sb deposits. Chloride complexes are dominant Au and Ag species in acid chloride-rich solutions of Ag-Sb deposits (up to 38 wt % NaCl equiv), while chloride and hydroxy complexes are characteristic of Sb. These solutions are distinguished by high concentrations of Ag, Sb, Cu, Fe, Mn, Bi, Pb, and Zn. The mineralogical and geochemical specialization of Ag-Sb ore is caused by chemical features of highly concentrated chloride solutions enriched in Ag, Sb, and Cu and by a relatively low Au content within the pH interval 3.5–4.0 (10?6 m). The factors controlling formation of Au-As deposits are a high capacity of a low-chloride sulfide solution with respect to metals and a high Au concentration therein (two orders higher than that of solutions of Ag-Sb deposits). The enrichment of the pyrite-arsenopyrite paragenetic assemblage in gold is a result of juxtaposed stability fields of native gold, arsenopyrite, and pyrite and their mass deposition with a decrease in temperature from 400 to 300°C. The main cause of the specific mineralogy and geochemistry of Au-Sb deposits is a high metal capacity of a near-neutral low-chloride sulfide fluid with respect to Sb, Au, and Ag, but a low Ag content. The mineralogical and fluid inclusion data combined with computer thermodynamic simulation allowed us to establish the factors of ore formation at P-T-X parameters close to natural conditions and made it possible to characterize the joint deposition of gold and silver in quantitative terms.  相似文献   

2.
The Xiangxi Au–Sb–W deposit, the largest of its type in northwestern Hunan, China, is a sulfide-dominated ore body hosted by low grade metamorphic red slates of the Neoproterozoic Madiyi Formation. Three stages of mineralization, quartz–scheelite, quartz–gold–pyrite, quartz–gold–stibnite, and one metal-barren stage of veining, quartz–calcite, are recognized. Arsenopyrite occurs only as a minor mineral phase in the second stage. Analyses for 21 trace elements show that the enrichment factors of As in the metal deposit (EC [=element concentration of sample/average content of an element in the upper crust]: 190; 43 samples) in ore veins and in the Guanzhuang and Yuershan reference sections (3.7 km and 2.7 km away from the Xiangxi mine, EC: 3.5; 96 samples) are much smaller than those of Sb (52855 [in ore veins], 117 [in the sections]), W (5665, 7.5) and Au (2727, 5.3). The background concentrations of Au and As in the two sections were 1.4 ppb and 1.4 ppm, respectively. Arsenic (with an anomaly coefficient [AC = number of anomalous samples/total number of samples] of 76%) forms a larger geochemical halo than W (AC: 8%) and Au (AC: 32%). Gold and As in the deposit were transported mainly as metal complexes such as Au(HS)−2, HnAs3S−(3−n)6 (n=1, 2 or 3) and HAsS02. Au(HS)−2 is rapidly precipitated by a geochemical oxidation barrier — the red slates of the Madiyi Formation. As–S complexes in the stratigraphic horizon can be transformed into As–O complexes (e.g., H3AsO03) under oxidizing conditions, and are continuously transported. Therefore, they can be widely distributed in the red slate units, thus forming extensive geochemical haloes, so that As can be used as an indicator element for Au exploration in the Xiangxi region.  相似文献   

3.
Despite the common belief that AuI complexes with hydrogen sulfide ligands (H2S/HS−) are the major carriers of gold in natural hydrothermal fluids, their identity, structure and stability are still subjects of debate. Here we present the first in situ measurement, using X-ray absorption fine structure (XAFS) spectroscopy, of the stability and structure of aqueous AuI–S complexes at temperatures and pressures (T–P) typical of natural sulfur-rich ore-forming fluids. The solubility of native gold and the local atomic structure around the dissolved metal in S–NaOH–Na2SO4–H2SO4 aqueous solutions were characterized at temperatures 200–450 °C and pressures 300–600 bar using an X-ray cell that allows simultaneous measurement of the absolute concentration of the absorbing atom (Au) and its local atomic environment in the fluid phase. Structural and solubility data obtained from XAFS spectra, combined with quantum-chemical calculations of species geometries, show that gold bis(hydrogensulfide) Au(HS)2− is the dominant Au species in neutral-to-basic solutions (5.5  pH  8.5; H2O–S–NaOH) over a wide range of sulfur concentrations (0.2 < ΣS < 3.6 mol/kg), in agreement with previous solubility studies. Our results provide the first direct determination of this species structure, in which two sulfur atoms are in a linear geometry around AuI at an average distance of 2.29 ± 0.01 Å. At acidic conditions (1.5  pH  5.0; H2O–S–Na2SO4–H2SO4), the Au atomic environment determined by XAFS is similar to that in neutral solutions. These findings, together with measured high Au solubilities, are inconsistent with the predominance of the gold hydrogensulfide Au(HS)0 complex suggested by recent solubility studies. Our spectroscopic data and quantum-chemical calculations imply the formation of species composed of linear S–Au–S moieties, like the neutral [H2S–Au–SH] complex. This species may account for the elevated Au solubilities in acidic fluids and vapors with H2S concentrations higher than 0.1–0.2 mol/kg. However, because of the complex sulfur speciation in acidic solutions that involves sulfite, thiosulfate and polysulfide species, the formation of AuI complexes with these ligands (e.g., AuHS(SO2)0, Au(HS2O3)2−, Au(HSn)2−) cannot be ruled out. The existence of such species may significantly enhance Au transport by high T–P acidic ore-forming fluids and vapors, responsible for the formation of a major part of the gold resources on Earth.  相似文献   

4.
An experimental study of the solubility of Pt and Pd sulfides and Au metal in aqueous bisulfide solutions was conducted at temperatures from 200° to 350 °C and at saturated vapor pressure. A 500-mL Bridgemantype pressure vessel constructed of titanium, and equipped with a motor-driven magnetic stirrer was employed. The pH and the oxidation state were buffered by the coexistence of H2S/HS–/SO inf4 sup2– . The pH at temperature was calculated to be in the range 5.91–9.43, and S was 0.3–2.2 m. Under the experimental conditions, the measured solubility of gold is about two to three orders of magnitude greater than that of either platinum and palladium, and the measured solubility of platinum is, in general, approximately equal to that of palladium, in molal units. The solubilities are found to be in the range: platinum 4–800 ppb, palladium 1–400 ppb, and gold 2–300 ppm. The solubility data can be modeled adequately using the following reactions: Au+H2S+HH–=Au(HS) 2 – +1/2H2 (K14); PtS+HS–+H+=Pt (HS) 2 0 (K15); PdS+HS–+H+=Pd (HS) 2 0 (K16); PtS2+H2=Pt (HS) 2 0 (K21).With equilibrium constants determined as follows (errors represent two standard deviations): Preliminary measurements of the solubilities of metallic Pt, Pd and Au as hydroxide complexes were also conducted using a second titanium pressure vessel, at temperatures of 200° to 350 °C and vapor saturation pressure, with pH and the oxidation state controlled or buffered by adding known amounts of NaOH and H2 gas. The concentration of NaOH was in the range 0.01–1.3 m, and the partial pressure of H2 at 200 °C was 62–275 bars, initially. Under the temperature and pressure conditions of these experiments, the solubility of platinum in 1 m NaOH solution is less than 100 ppb, that of palladium is less than 10 ppb and that of gold is less than 0.2 ppm; and in 0.01 m NaOH solutions, both Pt and Pd solubilities are less than 1 ppb. These data indicate that the contributions of hydroxide complexes to the total solubilities in the bisulfide runs, where the pH was in the range of 5.9–9.4, are negligible. The concentrations of both Pt and Pd as bisulfide complexes in the Salton Sea geothermal system predicted using the stability constants determined in this work agree very well with those values measured by McKibben et al. (1990). This calculation strongly suggests that the PGE are transported in moderately reducing, near neutral hydrothermal fluids as bisulfide complexes, as is gold. However, the much lower maximum solubility of the PGE relative to gold severely constrains models of re genesis, and may explain the relative rarity of hydrothermal PGE deposits compared to the relative abundance of hydrothermal Au deposits.  相似文献   

5.
Calculations based on the available thermodynamic data of AuCl 2 − and Au (HS) 2 − indicate that AuCl 2 − is responsible for the transport and enrichment of gold during the stage of pre-concentration in the source bed while Au (HS) 2 − is the main gold species involved in the formation of gold deposits in response to hydrothermal reworking. Acid chloride solutions witha Cl − > 10° and sulfur-rich solutions with aΣs in excess of 10−2 are held as important criteria for gold enrichment in the source bed and for the formation of gold deposits by subsequent hydrothermal event, respectively.  相似文献   

6.
Hypogene uytenbogaardtite, acanthite, and native gold parageneses have been revealed at the epithermal Yunoe gold-silver deposit, Magadan Region, Russia. Thermodynamic calculations in the system Si–Al–Mg–Ca–Na–K–Fe–Pb–Zn–Cu–Ag–Au–S–C–Cl–H2O were carried out at 25–400 °C and 1–1000 bars to elucidate the role of hydrothermal solutions in the formation of gold and silver sulfides. Several most probable scenarios for ore-forming processes in the deposit are considered: (1) interaction between cold and heated meteoric waters percolating along cracks from surface to depth and reacting with the host rock—rhyolite; (2) evolution of ascending postmagmatic fluid resulting in chloride–carbonic acid solution, which interacts with rhyolite at 100–400 °C; (3) stepwise cooling of hydrothermal ore-bearing solutions; (4) rapid cooling of ore-bearing hydrotherms on their mixing with cold surface waters. Rhyolite with Pb, Zn, Cu, Cl, S, Ag, and Au clarke contents was taken as an initial host rock. Calculations by model 3 showed the possible formation of uytenbogaardtite and petrovskaite at low-temperature stages. Gold and silver sulfides can be deposited during the mixing of ore-bearing acid chloride–carbonic acid hydrothermal solutions with surface alkaline waters.  相似文献   

7.
湘西层控金矿床成因机制的研究   总被引：19，自引：4，他引：19  
流体包裹体的研究表明,湘西层控金矿床为中低温热液矿床,矿床在弱还原、弱碱性的成矿流体中形成,成矿流体为变质水与建造水混合而成。在流体中金主要以[Au(HS)~-]络离子形式运移,流体温度及pH值的改变是导致金沉淀的主要因素。流体包裹体的研究还揭示,成矿能量主要由雪峰造山作用提供。元素地球化学的研究则证实,湘西元古界是典型的Au-Sb-W含矿建造,它为湘西层控金矿床的形成提供了物质基础。本文的研究显示,湘西层控金矿床的成矿作用是中低温开放体系水、岩反应过程。  相似文献   

8.
Samples of granitic rock from south-central Maine contain primary igneous minerals altered by hydrothermal fluids. The reaction mechanisms (by which the over-all mineralogical change during the alteration was accomplished) involve several different mineral-fluid reactions at different reaction sites in the rock. The reactions involve both molecular and charged species in solution. The different reaction sites correspond to alteration of different primary igneous minerals. Biotite is partially converted to chlorite+sphene; microcline to muscovite; plagioclase to various combinations of muscovite, epidote, and calcite. The different reaction sites are linked by exchange of ions: some reaction sites produce ions consumed at other sites and vice versa. Physical conditions during the hydrothermal event are estimated from mineralogical and thermochemical data: P = 3,500 (±300) bars; T =425 ° (± 25 °)C. The fluid was characterized by X CO 2 = 0–0.13; ln([K+]/[H+ ]) = 10.0; ln([Ca2+]/[H+]2)=9.1; ln([Na+]/[H+]) = 10.5; Fe/(Fe+Mg) = 0.95. Amounts of secondary minerals in altered rock, when compared to the inferred mineral reactions that formed them, indicate that small but significant amounts (0.01–0.3mol/ 1,000cm3 altered rock) of CO2, H2O, H+, and K+ were added to the granites by fluids during the alteration, as well as lesser amounts (< 0.01–0.03 mol/1,000cm3 altered rock) of Mg2+, Fe2+, Fe3+, Mn2+, Na+, and Ti4+. The sole element leached from the granitic rocks during alteration was Ca in amounts 0.1–0.3 mol/1,000 cm3 rock. By estimating the composition of the hydrothermal fluids before and after reaction with the granites and by measuring the amount of material added to or subtracted from the granites during the alteration, the amount and volume of hydrothermal fluid involved can be calculated. Two independent calculations require minimum volumes in the range 100–1,000 cm3 fluid/1,000cm3 altered rock to participate in the hydrothermal event.  相似文献   

9.
Ore deposits (occurrences) of Au, As, Sb, Hg, etc. distributed in Southwest Guizhou constitute the important portion of the low-temperature metallogenic domain covering a large area in Southwest China, with the Carlin-type Au and Sb deposits being the most typical ones. In this paper the Au and Sb ore deposits are taken as the objects of study. Through the petrographic analysis, microthermomitric measurement and Raman spectrophic analysis of fluid inclusions in gangue minerals and research on the S and C isotopic compositions in the gold ore deposits we can reveal the sources of ore-forming materials and ore-forming fluids and the rules of ore fluid evolution. Ore deposits of Au, Sb, etc. are regionally classified as the products of ore fluid evolution, and their ore-forming materials and ore fluids were probably derived mainly from the deep interior of the Earth. Fluid inclusion studies have shown that the temperatures of Au mineralization are within the range of 170-361℃,the salinities are 0.35 wt%-8 wt% NaCl eq.; the temperatures of Sb mineralization are 129.4-214℃ and the salinities are 0.18 wt%- 3.23 wt% NaCl eq.; the ore-forming fluid temperatures and salinities tend to decrease progressively. In the early stage (Au metallogenic stage) the ore-forming fluids contained large amounts of volatile components such as CO2, CH4, N2 and H2S, belonging to the H2O-CO2-NaCl fluid system; in the late stage (Sb metallogenic stage) the ore-forming fluids belong to the Sb-bearing H2O-NaCl system. The primitive ore-forming fluids may have experienced at least two processes of immiscibility: (1) when early ore-bearing hydrothermal solutions passed through rock strata of larger porosity or fault broken zones, CO2, CH4, N2 would escape from them, followed by the release of pressure, resulting in pressure release and boiling of primitive homogenous fluids, thereafter giving rise to their phase separation, thus leading to Au unloading and mineralization; and (2) in the late stage (Sb metallogenic stage ) a large volume of meteoric water was involved in the ore-forming fluids, leading to fluid boiling as a result of their encounter, followed by the drop of fluid temperature. As a result, the dissolubility of Sb decreased so greatly that Sb was enriched and precipitated as ores. Due to differences in physic-chemical conditions between Au and Sb precipitates, Au and Sb were respectively precipitated in different structural positions, thus creating such a phenomenon of Au/Sb paragenesis and differentiation in space.  相似文献   

10.
The Yueshan mineral belt is geotectonically located at the centre of the Changjiang deep fracture zone or depression of the lower Yangtze platform. Two main types of ore deposits occur in the Yueshan orefield: Cu–Au–(Fe) skarn deposits and Cu–Mo–Au–(Pb–Zn) hydrothermal vein-type deposits. Almost all deposits of economic interest are concentrated within and around the eastern and northern branches of the Yueshan dioritic intrusion. In the vicinity of the Zongpu and Wuhen intrusions, there are many Cu–Pb–Zn–Au–(S) vein-type and a few Cu–Fe–(Au) skarn-type occurrences.Fluid inclusion studies show that the ore-forming fluids are characterised by a Cl−(S)–Na+–K+ chemical association. Hydrothermal activity associated with the above two deposit types was related to the Yueshan intrusion. The fluid salinity was high during the mineralisation processes and the fluid also underwent boiling and mixed with meteoric water. In comparison, the hydrothermal activity related to the Zongpu and Wuhen intrusions was characterised by low salinity fluids. Chlorine and sulphur species played an important role in the transport of ore-forming components.Hydrogen- and oxygen-isotope data also suggest that the ore-forming fluids in the Yueshan mineral belt consisted of magmatic water, mixed in various proportions with meteoric water. The enrichment of ore-forming components in the magmatic waters resulted from fluid–melt partitioning. The ore fluids of magmatic origin formed large Cu–Au deposits, whereas ore fluids of mixed magmatic-meteoric origin formed small- to medium-sized deposits.The sulphur isotopic composition of the skarn- and vein-type deposits varies from − 11.3‰ to + 19.2‰ and from + 4.2‰ to + 10.0‰, respectively. These variations do not appear to have been resulted from changes of physicochemical conditions, rather due to compositional variation of sulphur at the source(s) and by water–rock interaction. Complex water–rock interaction between the ore-bearing magmatic fluids and sedimentary wall rocks was responsible for sulphur mixing. Lead and silicon isotopic compositions of the two deposit types and host rocks provide similar indications for the sources and evolution of the ore-forming fluids.Hydrodynamic calculations show that magmatic ore-forming fluids were channelled upwards into faults, fractures and porous media with velocities of 1.4 m/s, 9.8 × 10− 1 to 9.8 × 10− 7 m/s and 3.6 × 10− 7 to 4.6 × 10− 7 m/s, respectively. A decrease of fluid migration velocity in porous media or tiny fractures in the contact zones between the intrusive rocks and the Triassic sedimentary rocks led to the deposition of the ore-forming components. The major species responsible for Cu transport are deduced to have been CuCl, CuCl2−, CuCl32− and CuClOH, whereas Au was transported as Au2(HS)2S2−, Au(HS)2−, AuHS and AuH3SiO4 complexes. Cooling and a decrease in chloride ion concentration caused by fluid boiling and mixing were the principal causes of Cu deposition. Gold deposition was related to decrease of pH, total sulphur concentration and fO2, which resulted from fluid boiling and mixing.Geological and geochemical characteristics of the two deposit types in the Yueshan mineral belt suggest that there is a close genetic relationship with the dioritic magmatism. Geochronological data show that the magmatic activity and the mineralisation took place between 130 and 136 Ma and represent a continuous process during the Yanshanian time. The cooling of the intrusions and the mineralisation event might have lasted about 6 Ma. The cooling rate of the magmatic intrusions was 80 to 120 °C my− 1, which permitted sufficient heat supply by magma to the ore-forming system.  相似文献   

11.
The Gemericum is a segment of the Variscan orogen subsequently deformed by the Alpine–Carpathian orogeny. The unit contains abundant siderite–sulphide and quartz–antimony veins together with stratabound siderite replacement deposits in limestones and stratiform sulphide mineralization in volcano-sedimentary sequences. The siderite–sulphide veins and siderite replacement deposits of the Gemericum represent one of the largest accumulations of siderite in the world, with about 160 million tonnes of mineable FeCO3. More than 1200 steeply dipping hydrothermal veins are arranged in a regional tectonic and compositional pattern, reflecting the distribution of regional metamorphic zones. Siderite–sulphide veins are typically contained in low-grade (chlorite zone) sedimentary, volcano-sedimentary or volcanic Lower and Upper Paleozoic rocks. Quartz–antimony veins are hosted by higher-grade units (biotite zone). Siderite–sulphide veins are dominated by early siderite followed by a complex set of stages, including quartz–sulphide (chalcopyrite, tetrahedrite), barite, tourmaline–quartz, and sulphide-remobilization stages. The temporal evolution of these stages is difficult to study because of the widespread and repeated tectonic processes, within-vein replacement and recrystallization. Siderite–sulphide veins show considerable vertical (up to 1200 m) and lateral (up to 15 km) extent, and a thickness typically reaching several metres. Carbonate-replacement siderite deposits of the Gemericum are hosted by a Silurian limestone belt and are similar to stratabound siderite deposits of the Eastern Alps (e.g., Erzberg, Austria).Based on a review of geological, petrological and geochronological data for the Gemericum, and extensive stable and radiogenic isotope data and fluid inclusion data on hydrothermal minerals, the siderite–sulphide veins and siderite replacement deposits are classified as metamorphogenic in a broad sense. The deposits were formed during several stages of regional crustal-scale fluid flow. Isotope (S, C, Sr, Pb) fingerprinting identifies the metamorphosed rock complexes of the Gemericum as a source of most components of hydrothermal fluids. Fluid inclusion and stable isotope data evidence the participation of several contrasting fluid types, and the existence of contrasting P–T conditions during vein evolution. A high-δ18O, medium- to high-salinity, H2O-type fluid is the most important component during siderite deposition, whereas H2O–CO2-type fluid inclusion containing dense liquid CO2 and corresponding to minimal pressures between 1 and 3 kbar were found in a younger tourmaline–quartz stage. Younger quartz–ankerite(±siderite)–sulphide stages are characterized by high-salinity (17 to 35 wt.% NaCl equivalent) and low-temperature (Th=90 to 180 °C) H2O-type fluids.The vein deposits are interpreted as a result of multistage hydrothermal circulation, with Variscan and Alpine mineralization phases. Based on available indirect data, the most important mineralization phase was related to regional fluid flow during the uplift of a Variscan metamorphic core complex, producing siderite–sulphide (±barite) mineralization, while tourmaline–quartz stage and sulphide remobilization stages are related to Alpine processes. Two phases of vein evolution are evident from two groups of 87Sr/86Sr isotope ratios of Sr-rich, Rb-poor hydrothermal minerals: 0.71042–0.71541 in older barite and 0.7190–0.7220 in late-stage celestine and strontianite.  相似文献   

12.
The Igarapé Bahia gold deposit has developed from weathering of a near-vertical hydrothermal Cu (Au) mineralization zone. The unweathered bedrock composed of chlorite schists is mainly metamorphosed basalts, pyroclastic and clastic sedimentary rocks and iron formation. Contents and Fe/(Fe + Mg) ratios of chlorites increase from distal country rock towards the mineralization zone, which can be attributed to different water/rock ratios and locations in a hydrothermal system. In the hydrothermal system high salinity fluids convected through basin-floor rocks, stripping metals from the recharge zones with precipitation in discharge zones. The chlorite with lower Fe/(Fe + Mg) ratios indicates alteration by relatively unreacted Mg-rich fluids, occurring within recharge zones. By contrast, the chlorite with higher Fe/(Fe + Mg) ratios in the mineralization zone formed from solutions rich in Fe, Mn, Au, Cu, H2S and SiO2 within a discharge zone. The iron formation could also be formed within the discharge zone or on the basin floor from the Fe-rich fluids. The distal country rock with less chlorite content is a hydrothermal product at low water/rock ratios whereas the proximal country rock and the host rock with more chlorite content formed at high water/rock ratio conditions. The Al(IV) contents of chlorites indicate that the formation temperatures of these rocks range from 204 to 266 °C, with temperatures slightly increasing from distal country rock towards the mineralization zone.  相似文献   

13.
马扎拉金-锑矿床是藏南巨型金-锑成矿带的重要组成部分,其矿床成因目前仍存在不同认识.通过主要矿石和蚀变围岩的岩相学、矿相学、流体包裹体和稳定同位素分析,探讨了马扎拉金-锑矿床的成矿流体性质、矿质迁移和沉淀机制.结果表明,马扎拉金-锑矿床成矿流体主要来自岩浆水,主成矿期流体为中温(约255℃)、低盐度(2.8%~3.5%NaCleqv)、富CO2流体,成矿压力约150 MPa,流体演化过程中的CO2与水的不混溶是造成矿质沉淀的主要原因,成矿金属主要来源于地层,特别是区域广泛分布的海相火山岩地层.  相似文献   

14.
 采用分阶段加热爆裂法测定了不同成因热液矿床脉石英流体包裹体的氩同位素,计算出各温度段内大气氩的相对含量,从而,总结出大气降水热液矿床、再平衡岩浆水热液矿床等成矿流体的氩同位素组成特征及其演化规律。典型的大气降水热液矿床,其成矿流体以具有高大气Ar组分(约95%-100%)为特征;再平衡岩浆水热液矿床成矿流体的Ar同位素组成特征取决于与其有成因关系的初始岩浆水的Ar同位素组成及矿源层和围岩的性质,产于古老变质岩中的,一般以具有低大气Ar组分(约6%-20%)为特征,其它的再平衡岩浆水热液矿床在主成矿温度范围内一般为50%-60%左右。  相似文献   

15.
The central Iberian zone of the Hesperian Massif hosts a series of late Hercynian vein-type Sb deposits. One of them is the Mari Rosa mineralization, hosted by metagreywackes and slates of the Schist-Greywacke Complex (Upper Precambrian). The mineralization is characterized by a complex paragenesis comprising three hydrothermal stages: stage H1 arsenopyrite-(pyrite); stage H2 stibnite-gold; and stage H3 pyrite-pyrrhotite-galena-sphalerite-chalcopyrite-tetrahedrite-boul-angerite-stibnite. Of these only the second episode was of importance and gave rise to the main mineralized bodies of the deposit. Hydrothermal alteration consists of a mild sericitization, chloritization and carbonatization of the metasedimentary rocks around the veins. Chemical changes in the hydrothermal halos include a remarkable increase in the ratio K2O/Na2O, and a decrease in the ratio SiO2/volatiles, together with a sharp increase in Sb, Mo, Au and N. Fluids associated with ore deposition lie in the H2O-NaCl-CO2-CH4-N2 compositional system. These fluids evolved, progressively cooling, from initial circulaion temperatures close to 400 °C in the early stage (H1) to temperatures of approximately 150 °C in the late one (H3). Fluid composition evolution was characterized by a progressive increase in the bulk water content of the fluids and with an increase in the relative proportion of N2 with respect to CH4 and CO2 in the volatile fraction. Massive stibnite deposition resulted from a boiling process developed at 300 °C and 0.9–1 Kb at a depth of 4–5 km. Geological, geochemical and fluid inclusion evidence suggest that the intrusion of the Alburquerque batholith (late Hercynian S-type granitoids) triggered hydrothermal activity leading to the transport and deposition of Sb and Au in Mari Rosa.  相似文献   

16.
The Mihalıççık region (Eskişehir) in NW Turkey includes an ophiolitic assemblage with a serpentinite‐matrix mélange. The serpentinites of this mélange host silica‐carbonate metasomatites which were previously named as listvenites. Our mineralogical and geochemical studies revealed that these alteration assemblages represent members of the listvenitic series, mainly the carbonate rocks, silica‐carbonate rocks and birbirites, rather than true listvenites (sensu stricto). Tectonic activity and lithology are principal factors that control the formation of these assemblages. Carbonatization and silicification of the serpentinite host‐rock is generated by CO2, SiO2‐rich H2O hydrothermal fluid which includes As, Ba, Sb and Sr. Low precious metal (Au, Ag) contents of the alteration assemblages indicate lack of these metals in the fluid. Primary assemblages of the alteration are carbonate rocks that are followed by silica‐carbonate rocks and birbirites, respectively. Petrographic studies and chemical analyses suggested an alkaline and moderate to high temperature (350–400°C) fluid with low oxygen and sulphur fugacity for the carbonatization of the serpentinites. The low temperature phases observed in the subsequent silicification indicated that the fluid cooled during progressive alteration. The increasing Fe‐oxide content and sulphur phases also suggested increasing oxygen and sulphur fugacity during this secondary process and silica‐carbonate rock formation. The occurrence of birbirites is considered as a result of reactivation of tectonic features. These rocks are classified in two sub‐groups; the Group 1 birbirites show analogous rare earth element (REE) trends with the serpentinite host‐rock, and the Group 2 birbirites simulate the REE trends of the nearby tectonic granitoid slices. The unorthodox REE trend of Group 2 birbirites is interpreted to have resulted from a mobilization process triggered by the weathering solutions rather than being products of enrichment by the higher temperature hydrothermal activity. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

17.
Concentrations of Au, Ag, As, Cd and Sb in aquatic bryophytes collected from the Dolgellau Mineral Belt, North Wales, U.K. are reported. One aquatic liverwort, Scapania undulata (L) Dum. and two mosses, Fontinalis squamosa Hedw. and Racomitrium aciculare (Hedw.) Brid. were collected from sites upstream and downstream of the recently reopened Gwynfyndd Au mine. There was little inter-species variation in metal contents for these three bryophytes, but Scapania undulata appeared the most sensitive to changes in water concentrations of Ag, As and Sb. Gold concentrations varied little between the contaminated and control sites. Concentrations in the range < 4–18 ng Aug g−1 D.W. were typical background levels, while bryophytes collected immediately below the mine contained 6–45 ng Au g−1. Silver and Sb both showed more pronounced ( 5–10 fold) elevations above control concentrations in samples collected downstream of the mine. Background concentrations for these elements were 5–85 ng Ag g−1 and 0.15–1.3 μg Sb g−1.Arsenic concentrations downstream of the mine (160–1080 μg g−1) greatly exceeded the background range of 9–32 μg g−1. It is suggested, therefore, that As may be an ideal ‘pathfinder’ element when prospecting for auriferous deposits using aquatic bryophytes.  相似文献   

18.
Crystals of hydronium jarosite were synthesized by hydrothermal treatment of Fe(III)–SO4 solutions. Single-crystal XRD refinement with R1=0.0232 for the unique observed reflections (|Fo| > 4F) and wR2=0.0451 for all data gave a=7.3559(8) Å, c=17.019(3) Å, Vo=160.11(4) cm3, and fractional positions for all atoms except the H in the H3O groups. The chemical composition of this sample is described by the formula (H3O)0.91Fe2.91(SO4)2[(OH)5.64(H2O)0.18]. The enthalpy of formation (Hof) is –3694.5 ± 4.6 kJ mol–1, calculated from acid (5.0 N HCl) solution calorimetry data for hydronium jarosite, -FeOOH, MgO, H2O, and -MgSO4. The entropy at standard temperature and pressure (So) is 438.9±0.7 J mol–1 K–1, calculated from adiabatic and semi-adiabatic calorimetry data. The heat capacity (Cp) data between 273 and 400 K were fitted to a Maier-Kelley polynomial Cp(T in K)=280.6 + 0.6149T–3199700T–2. The Gibbs free energy of formation is –3162.2 ± 4.6 kJ mol–1. Speciation and activity calculations for Fe(III)–SO4 solutions show that these new thermodynamic data reproduce the results of solubility experiments with hydronium jarosite. A spin-glass freezing transition was manifested as a broad anomaly in the Cp data, and as a broad maximum in the zero-field-cooled magnetic susceptibility data at 16.5 K. Another anomaly in Cp, below 0.7 K, has been tentatively attributed to spin cluster tunneling. A set of thermodynamic values for an ideal composition end member (H3O)Fe3(SO4)2(OH)6 was estimated: Gof= –3226.4 ± 4.6 kJ mol–1, Hof=–3770.2 ± 4.6 kJ mol–1, So=448.2 ± 0.7 J mol–1 K–1, Cp (T in K)=287.2 + 0.6281T–3286000T–2 (between 273 and 400 K).  相似文献   

19.
Most sulphides from various rock types and mineralization of Archean age exhibit sulphur isotope values (δ34S) near 0‰. This is due to a general absence of conditions suitable for the oxidation-reduction reactions essential for isotopic fractionation. However, some important occurrences of Archean Au mineralization do display significant variations in δ34S). One such occurrence with unusual isotopic compositions is the Hemlo gold deposit: pyrite from the ore typically has δ34S < −6‰ to a minimum value of −17.5‰ The isotopic composition of the pyrite is correlated with the content of Au, indicating that they are genetically related.The sulphur isotope data suggest that sulphur compounds experienced redox reactions in the hydrothermal system at Hemlo and that sulphate was present prior to the Au mineralization. This sulphate may be of exogenic origin from a restricted basin, or of endogenic origin from magmatic-hydrothermal fluids. Other characteristic features of the deposit, such as enrichment in Sb, Tl and Hg, may also be explained by ore deposition under moderately oxidizing conditions.Distinctive δ34S values were also observed in pyrite from Au mineralization at Heron Bay, 30 km west of Hemlo, and from baritic strata 21 to 27 km west and on approximate strike from Hemlo. These occurrences also represent sulphate-bearing hydrothermal systems and, as such, give distant information on the unusual environment of the mineralization at Hemlo. Since the isotopes of sulphur are sensitive to oxidation conditions they may be used to identify hydrothermal activities characteristic of this type of Au mineralization and to explore for other unusual areas of sulphate accumulation in Archean terrains.  相似文献   

20.
The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na3AlF6] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO2, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO2 and H2O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ13C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ18O of CO2 (+ 21 to + 42‰ VSMOW) and δ18O of H2O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H2O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号