首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The distribution and rates of accumulation of Mo in marine deposits have been determined and compared with the same parameters for U and Mn. High concentrations of Mo are associated both with oxidizing environments represented by the presence of ferro-manganese oxide-rich sediments (where Mo/U ～- 3) and with reducing environments (where Mo/U is about unity). The supply of Mo by streams is more than adequate to balance the measured removal rate in normal deep-sea deposits and no submarine volcanic ‘emanations’ need be involved. On an ocean-wide basis, 4 · 3 μg Mo/cm2/1000 yr is supplied in solution by streams. Of this, 2·0 μg Mo/cm2/1000 yr is removed in deep-sea sediments and manganese nodules. The remaining 2·3 μg Mo/cm2/1000 yr is probably removed in primarily (but not exclusively) near-shore reducing sediments. The average Mo accumulation rate in these environments is about 1000 μg Mo/cm2/1000 yr; thus only 0·23 per cent of the world ocean area need be such reducing sites.  相似文献   

2.
This paper presents the results of measurements of the Mo isotopic composition in the bottom sediments (BS) of freshwater basins. Mo isotopic ratios were measured using a multicollector inductively coupled plasma mass spectrometer (MC ICP MS). Efficient methods were used in this study for Mo separation from the elements of the sample matrix and correction for instrumental mass discrimination. This allowed us to achieve a high accuracy of 0.06, 0.08, and 0.14‰ (2 σ) for the measurement of 97Mo/95Mo, 98Mo/95Mo, and 100Mo/95Mo, respectively. The range of variations in Mo isotope ratios observed in the collected BS columns was ～2.2‰ in terms of δ97Mo/95Mo. The results obtained here suggest that geochemical processes occurring during Mo migration with land water can change the isotopic composition of Mo. It is pointed out that the potential use of Mo isotopic systematics for reconstructions of redox conditions in seawater over the geologic past requires the quantification of isotopic effects of Mo accompanying its migration on land and the extent of possible variations in the isotopic composition of Mo entering the ocean.  相似文献   

3.
Elevated concentrations of Mo are present in both the waters and sediments of Tenmile Creek, downstream from the large Mo deposit at Climax. Colorado. Concentrations of Mo reach a maximum of 10mg/1 in the water and 384μ/g in the (?) 80 mesh fraction of the sediment. The Mo anomaly extends for more than 80 km downstream from Climax, and results from the mining and milling at Climax. Background Mo concentrations in the nearby mountainous area are < 10μg/l (water) and < 5μg/g (sediment). Immediately below three small unmined Mo-rich orebodies elsewhere in Colorado < 3μg/l Mo are present in the waters and 20–30μg/g Mo in the fine fraction of the sediments.The Mo in the sediment of Tenmile Creek is chiefly adsorbed on coatings of amorphous Fe oxyhydroxide. and is similar to its form below two small, unmined Mo deposits. Mining has not changed the character of the chemical processes responsible for Mo dispersion from the Climax site.A modified version of the WATEQF computer program (Plummeret al., 1976) predicts that Tenmile Creek is undersaturated with respect to ferrimolybdite. molybdenite, powellite, and ilsemannite. The Mo in the stream water occurs as the molybdate ion which can be adsorbed on amorphous Fe oxyhydroxides. These predictions are supported by the absence of Mo minerals in the sediment of Tenmile Creek.  相似文献   

4.
We use the molybdenum isotope paleoredox proxy to look for evidence of small amounts of O2 in the environment ∼50 Ma before the Great Oxidation Event (GOE) in a high resolution profile from the ∼2.5 Ga Mt. McRae Shale. The molybdenum isotope compositions (δ98/95Mo) from samples throughout the sequence span a range from 0.99‰ to 1.86‰. All samples have heavier δ98/95Mo compared to average upper continental crust. In addition, the upper (S1) and lower (S2) black shale units within the Mt. McRae Shale exhibit systematic differences in average isotopic compositions and distinct patterns of δ98/95Mo variation. Heavier δ98/95Mo values occur in the S1 unit, where δ98/95Mo correlates with Mo enrichments. In the S2 unit, δ98/95Mo is not as heavy and is relatively invariant.Based on sedimentary Fe proxies we infer that S1 sediments were deposited under euxinic conditions, so that Mo removal from bottom waters was likely quantitative. Thus, δ98/95Mo in this interval likely records coeval seawater. The lighter δ98/95Mo values in the S2 unit may indicate a less fractionated ocean Mo inventory relative to the S1 unit. However, sedimentary Fe proxies suggest that S2 sediments accumulated under a water column that was ferruginous rather than euxinic, raising the possibility of non-quantitative Mo scavenging and hence an expressed δ98/95Mo fractionation relative to coeval seawater. Because any associated fractionations during this process would have favored the light isotope in sediments, the lighter δ98/95Mo values in the S2 unit represent a lower limit on the value in contemporaneous seawater.After evaluating a range of hypotheses, we conclude that the isotopically heavy δ98/95Mo values seen throughout the Mt. McRae Shale likely reflect the effects of oxidative weathering and adsorption of Mo to oxide mineral surfaces on land or in surface oceans. The extent of environmental oxygenation in either unit is difficult to assess due to uncertainties in the global Mo isotope budget. Because of the small ocean Mo inventory in the Late Archean, documented by low concentrations of Mo and low Mo/TOC, the extent of oxygenation required to account for the observed fractionations is much smaller than in modern oceans. However, when juxtaposed against the record of δ98/95Mo through time, our findings provide further evidence of the onset of environmental oxygenation before the GOE.  相似文献   

5.
We have developed a new chemical procedure for the quantitative separation of molybdenum (Mo) and rhenium (Re) from a wide variety of geological samples. A single pass anion exchange separation provided complete recovery of pure Mo and Re in a form that was ideal for subsequent isotope and abundance determination by multi-collector inductively coupled plasma-mass spectroscopy (MC-ICP-MS). An enriched 100Mo-97Mo solution, mixed with the sample before digestion, enabled natural mass-dependant isotopic fractionation of Mo to be determined with an external reproducibility of < 0.12‰ (δ98Mo/95Mo, 2 s ). Determination of the concentration of Mo and Re in the same sample was achieved by isotope dilution, with instrumental mass-fractionation of Re being corrected by the simultaneous measurement of the 191Ir/193Ir ratio. We have applied the new procedure to a variety of samples, including seawater, basalt and organic-rich mudrock. The procedure is ideally suited to palaeoredox studies requiring the precise determination of the Mo isotope composition and the Re/Mo ratio from the same sample.  相似文献   

6.
The distribution of Mo between seawater and marine ferromanganese oxides has great impacts on concentration and isotopic composition of Mo in modern oxic seawater. To reveal the adsorption chemistry of Mo to ferromanganese oxides, we performed (i) detailed structural analyses of Mo surface complexes on δ-MnO2, ferrihydrite, and hydrogenetic ferromanganese oxides by L3- and K-edge XAFS, and (ii) adsorption experiments of Mo to δ-MnO2 and ferrihydrite over a wide range of pHs, ionic strengths, and Mo concentrations. XAFS analyses revealed that Mo forms distorted octahedral (Oh) inner-sphere complexes on δ-MnO2 whereas it forms a tetrahedral (Td) outer-sphere complex on ferrihydrite. In the hydrogenetic ferromanganese oxides, the dominant host phase of Mo was revealed to be δ-MnO2. These structural information are consistent with the macroscopic behaviors of Mo in adsorption experiments, and Mo concentration in modern oxic seawater can be explained by the equilibrium adsorption reaction on δ-MnO2. In addition, the large isotopic fractionation of Mo between seawater and ferromanganese oxides detected in previous studies can be explained by the structural difference between and adsorbed species on the δ-MnO2 phase in ferromanganese oxides. In contrast, smaller fractionation of Mo isotopes on ferrihydrite is due to little change in the Mo local structures during its adsorption to ferrihydrite.The structures of Mo species adsorbed on crystalline Fe (oxyhydr)oxides, goethite, and hematite were also investigated at pH 8 and I = 0.70 M (NaNO3). Our XAFS analyses revealed that Mo forms inner-sphere complexes on both minerals: Td edge-sharing (46%) and Oh double corner-sharing (54%) for goethite, and Td double corner-sharing (14%) and Oh edge-sharing (86%) for hematite. These structural information, combined with those for amorphous ferrihydrite and δ-MnO2, show the excellent correlation with the magnitude of adsorptive isotopic fractionation of Mo reported in previous studies: the proportion of Oh species or their magnitude of distortion in Mo surface complexes become larger in the order of ferrihydrite < goethite < hematite < δ-MnO2, a trend identical to the magnitude of isotopic fractionation.Based on the comparison with previous reports for Mo surface species on various oxides, the chemical factors that affect Mo surface complex structures were also discussed. The hydrolysis constant of cation in oxides, log KOH (or the acidity of the oxide surfaces, PZC) is well correlated with the mode of attachment (inner- or outer-sphere) of Mo surface complexes. Furthermore, the symmetric change in Mo species from Td to Oh is suggested to be driven by the formation of inner-sphere complexes on specific sites of the oxide surfaces.  相似文献   

7.
李梦娣  周炼  王焰新  吴潇  王帅 《地球科学》2014,39(1):99-107
砷在天然环境中的迁移富集与氧化还原状态密切相关.盆地环境地下水中砷的活化迁移机制主要为沉积物中铁/锰氢氧化物由氧化还原条件变化导致发生还原性溶解进而释放吸附在其表面的砷.钼及钼同位素为氧化还原环境的重要指示参数, 且铁/锰氢氧化物对钼同位素分馏有着重要的控制作用.将地下水的钼同位素应用于砷的活化迁移规律研究.大同盆地地下水中钼同位素比值(δ98Mo)范围为-0.12‰~+2.17‰, 相比于淡水中钼同位素组成偏重.桑干河河水的δ98Mo为+0.72‰, 与文献报道的河水平均钼同位素比值+0.7‰相当.大同盆地地下水中δ98Mo与硫化物之间存在正相关关系, 表明Mo-Fe-S复合物可能形成于特定条件下, 并优先利用水溶液中轻的钼使地下水中δ98Mo比值升高.砷浓度与钼浓度之间的微弱负相关以及砷浓度与钼同位素之间的正相关说明, Mo-Fe-S的形成过程可能与同环境中As-Fe-S的复合物的形成存在竞争关系, 进而使得地下水中砷富集.地下水中相对偏高的δ98Mo可能来源于铁的氢氧化物对溶液中轻的钼的吸附速率高于先前吸附在铁的氢氧化物的钼的释放, 且铁的氢氧化物对水溶液中钼的再吸附这一循环过程会导致地下水中钼浓度降低及钼同位素比值的升高.钼同位素指示的循环性的铁的氢氧化物的还原溶解及再氧化过程对砷的富集也有重要影响.   相似文献   

8.
Re-Os data and PGE concentrations as well as Mo concentrations and isotope data are reported for suites of fine clastic sediments and black shales from the Barberton Greenstone Belt, South Africa (Fig Tree and Moodies Groups, 3.25-3.15 Ga), the Belingwe Greenstone Belt, Zimbabwe (Manjeri Formation, ca. 2.7 Ga) and shales from the Witwatersrand, Ventersdorp and Transvaal Supergroups, South Africa ranging from 2.95 to 2.2 Ga. Moderately oxidizing conditions are required to mobilize Re and Mo in the environment, Mo fractionation only occurs in solution, and these parameters thus have potential use as paleoredox proxies for the early Earth.PGE + Re abundance patterns of Barberton Greenstone Belt sediments are uniform and very similar in shape to those of komatiites. This indicates (1) that the PGE came from a source of predominantly ultramafic composition and, (2) that PGE were transported and deposited essentially in particulate form. Sediments from the younger Belingwe Greenstone Belt show more fractionated PGE + Re patterns and have Re/Os ratios 10 to 100× higher than those of Barberton sediments. Their PGE abundance patterns and Re/Os ratios are intermediate between those of the mid-Archean shales and Neoproterozoic to Recent black shales. They reflect scavenging of Re from solution in the sedimentary environment.δ98/95Mo values of black shales of all ages correlate with their concentrations. The Barberton Greenstone Belt samples have ∼1-3 ppm Mo, similar to a granitoid-basaltic source. This Mo has δ98/95Mo between −1.9 and −2.4‰ relative to present day mean ocean water molybdenum, MOMO and is thus not isotopically fractionated relative to such a source. Similar to the PGE this indicates transport in solid form. Sediments from the Belingwe Greenstone Belt show in part enhanced Mo concentrations (up to 6 ppm) and Mo isotope fractionation (δ98/95Mo up to −1.4‰ relative to MOMO). The combined PGE + Re and Mo data show mainly reducing conditions in the mid-Archean and suggest that by 2.7 Ga, the atmosphere and oceans had become more oxidizing.Substantially younger samples from the Transvaal Supergroup (to ca. 2.2 Ga) surprisingly have mainly low Mo concentrations (around 1 ppm) and show no significant Mo isotope fractionation relative to the continental source. Among possible explanations for this are a return to reducing atmospheric conditions after 2.7 Ga, reservoir effects, or Mo removal by sulfide precipitation following sulfate reduction in early Proterozoic oceans.  相似文献   

9.
A novel preconcentration method is presented for the determination of Mo isotope ratios by multi‐collector inductively coupled plasma‐mass spectrometry (MC‐ICP‐MS) in geological samples. The method is based on the separation of Mo by extraction chromatography using N‐benzoyl‐N‐phenylhydroxylamine (BPHA) supported on a microporous acrylic ester polymeric resin (Amberlite CG‐71). By optimising the procedure, Mo could be simply and effectively separated from virtually all matrix elements with a single pass through a small volume of BPHA resin (0.5 ml). This technique for separation and enrichment of Mo is characterised by high selectivity, column efficiency and recovery (~ 100%), and low total procedural blank (~ 0.18 ng). A 100Mo‐97Mo double spike was mixed with samples before digestion and column separation, which enabled natural mass‐dependent isotopic fractionation to be determined with a measurement reproducibility of  < 0.09‰ (δ98/95Mo, 2s) by MC‐ICP‐MS. The mean δ98/95MoSRM 3134 (NIST SRM 3134 Mo reference material; Lot No. 891307) composition of the IAPSO seawater reference material measured in this study was 2.00 ± 0.03‰ (2s, n = 3), which is consistent with previously published values. The described procedure facilitated efficient and rapid Mo isotopic determination in various types of geological samples.  相似文献   

10.
Molybdenum (Mo) isotopes have great potential as a paleoredox indicator, but this potential is currently restricted by an incomplete understanding of isotope fractionations occurring during key (bio)geochemical processes. To address one such uncertainty we have investigated the isotopic fractionation of Mo during adsorption to a range of Fe (oxyhydr)oxides, under variable Mo/Fe-mineral ratios and pH. Our data confirm that Fe (oxyhydr)oxides can readily adsorb Mo, highlighting the potential importance of this removal pathway for the global Mo cycle. Furthermore, adsorption of Mo to Fe (oxyhydr)oxides is associated with preferential uptake of the lighter Mo isotopes. Fractionations between the solid and dissolved phase (Δ98Mo) increase at higher pH, and also vary with mineralogy, increasing in the order magnetite (Δ98Mo = 0.83 ± 0.60‰) < ferrihydrite (Δ98Mo = 1.11 ± 0.15‰) < goethite (Δ98Mo = 1.40 ± 0.48‰) < hematite (Δ98Mo = 2.19 ± 0.54‰). Small differences in isotopic fractionation are also seen at varying Mo/Fe-mineral ratios for individual minerals. The observed isotopic behaviour is consistent with both fractionation during adsorption to the mineral surface (a function of vibrational energy) and adsorption of different Mo species/structures from solution. The different fractionation factors determined for different Fe (oxyhydr)oxides suggests that these minerals likely exert a major control on observed natural Mo isotope compositions during sediment deposition beneath suboxic through to anoxic (but non-sulfidic) bottom waters. Our results confirm that Mo isotopes can provide important information on the spatial extent of different paleoredox conditions, providing they are used in combination with other techniques for evaluating the local redox environment and the mineralogy of the depositing sediments.  相似文献   

11.
邱宏喜 《地质与勘探》2014,50(Z1):1399-1405
本文建立了一种快速分析区域地质矿产调查样品中钨钼的方法。试样经高温焙烧、碱熔分解,钨、钼与其它杂质元素所形成的氢氧化物沉淀分离;在二苯乙醇酸体系(0.25mol/L硫酸-0.04g/L二苯乙醇酸-0.10g/L二苯胍-20g/L氯酸钠)中,钼、钨分别于约-0.25V、-0.85V产生灵敏的平行催化波,根据极限扩散电流的大小同时测定这两种元素。该方法的测定下限(X0+3S)<0.10×10-6;准确度(|Δlog|)≤0.05;精密度(RSD)≤7.72%。国家标准物质测定值与标准值相符;实际样品测定值优于电感耦合等离子体发射质谱法。方法扩大了催化极谱法的适应性,提高了实际应用价值。  相似文献   

12.
Suboxic trace metal geochemistry in the Eastern Tropical North Pacific   总被引：3，自引：0，他引：3  
We analyzed Al, Ti, Fe, Mn, Cu, Ba, Cd, U, Mo, V, and Re in water column, settling particulate, and sediment (0 to 22 cm) samples from the intense oxygen minimum zone (OMZ) of the eastern tropical North Pacific near Mazatlán, Mexico. The goal was to determine how the geochemistry of these elements was influenced by suboxic water column conditions and whether the sediments have a unique “suboxic” geochemical signature.The water column was characterized by a Mn maximum, reaching ∼8 nmol kg−1 at 400 m. Concentrations of Cu, Ba, Cd, Mo, Re, U, and V were unaffected by the low O2 conditions and were comparable to those of the open ocean. Sinking particles were composed of lithogenic particles of detrital origin and nonlithogenic particles of biogenic origin. Al, Ti, and Fe were mostly (at least 79%) lithogenic. About 75% of the Mn was nonlithogenic. Significant amounts (at least 58%) of Cu, Ba, Cd, and Mo were nonlithogenic.Sediment geochemistry varied across the continental shelf and slope. Cadmium, U, and Re have prominent maxima centered at 310 m, with 12.3 ppm, 10.9 ppm, and 68.3 ppb, respectively, at the core top. High values of Mo (averaging 6.8 ppm) and V (averaging 90 ppm) are seen in OMZ surface sediment. Additional down-core enrichment occurs for all redox-sensitive elements in the top 10 cm. For U, Mo, V, and Re, surface sediments are a poor indicator of metal enrichment. Comparison of the nonlithogenic composition of sediments with sinking particles suggests that direct input of plankton material enriched in metals makes a significant contribution to the total composition, especially for Cd, U, and Mo.We evaluated Re/Mo and Cd/U ratios as tracers for redox environments. Rhenium and Mo concentrations and Re/Mo ratios do not lead to consistent conclusions. Concurrent enrichments of Re and Mo are an indicator of an anoxic depositional environment. In contrast, high Re/Mo ratios are an indicator of suboxic conditions. Cadmium is enriched in surface sediments, while U has considerable down-core enrichment. The concentrations of Cd and U and the Cd/U ratio do not follow patterns predicted from thermodynamics. Though the water column is suboxic, these four redox-sensitive elements indicate that the sediments are anoxic. The implication for paleostudies is that a trace metal sediment signature that indicates anoxic conditions is not necessarily attributable to an anoxic water column.  相似文献   

13.
This study examined the removal of U, Mo, and Re from seawater by sedimentary processes at a shallow-water site with near-saturation bottom water O2 levels (240-380 μmol O2/L), very high organic matter oxidation rates (annually averaged rate is 880 μmol C/cm2/y), and shallow oxygen penetration depths (4 mm or less throughout the year). Under these conditions, U, Mo, and Re were removed rapidly to asymptotic pore water concentrations of 2.2-3.3 nmol/kg (U), 7-13 nmol/kg (Mo), and 11-14 pmol/kg (Re). The depth order in which the three metals were removed, determined by fitting a diffusion-reaction model to measured profiles, was Re < U < Mo. Model fits also suggest that the Mo profiles clearly showed the presence of a near-interface layer in which Mo was added to pore waters by remineralization of a solid phase. The importance of this solid phase source of pore water Mo increased from January to October as the organic matter oxidation rate increased, bottom water O2 decreased, and the O2 penetration depth decreased. Experiments with in situ benthic flux chambers generally showed fluxes of U and Mo into the sediments. However, when the overlying water O2 concentration in the chambers was allowed to drop to very low levels, Mn and Fe were released to the overlying water along with the simultaneous release of Mo and U. These experiments suggest that remineralization of Mn and/or Fe oxides may be a source of Mo and perhaps U to pore waters, and may complicate the accumulation of U and Mo in bioturbated sediments with high organic matter oxidation rates and shallow O2 penetration depths.Benthic chamber experiments including the nonreactive solute tracer, Br−, indicated that sediment irrigation was very important to solute exchange at the study site. The enhancement of sediment-seawater exchange due to irrigation was determined for the nonreactive tracer (Br−), TCO2, , U and Mo. The comparisons between these solutes showed that reactions within and around the burrows were very important for modulating the Mo flux, but less important for U. The effect of these reactions on Mo exchange was highly variable, enhancing Mo (and, to a lesser extent, U) uptake at times of relatively modest irrigation, but inhibiting exchange when irrigation rates were faster. These results reinforce the observation that Mo can be released to and removed from pore waters via sedimentary reactions.The removal rate of U and Mo from seawater by sedimentary reactions was found to agree with the rate of accumulation of authigenic U and Mo in the solid phase. The fluxes of U and Mo determined by in situ benthic flux chamber measurements were the largest that have been measured to date. These results confirm that removal of redox-sensitive metals from continental margin sediments underlying oxic bottom water is important, and suggest that continental margin sediments play a key role in the marine budgets of these metals.  相似文献   

14.
We analyzed the molybdenum (Mo) isotope compositions (IC) of 59 samples from two molybdenite mineralizations (Alpjahorn and Grimsel) and from a Mo-rich hydrothermal breccia (Grimsel) from the Aar Massif, Switzerland. The formation temperature of the Late Paleozoic Mo mineralizations (300-600 °C) is much higher than that of the Pliocene breccia (100-160 °C). The Mo IC of the molybdenites varies over 1.35‰. Even in a single hand specimen it spans 0.45‰, indicating that fractionation processes during molybdenite precipitation can vary on a cm scale. The Mo IC of most molybdenites analyzed here are significantly heavier than that of the host rock (δ98/95Mo = (0.05 ± 0.1)‰) and show a bimodal distribution centered around δ98/95Mo ≈ 1.1‰ and 0.2‰. This result rules out single stage Rayleigh fractionation as the relevant formation mechanism and instead, redox variations are suggested to be a main factor controlling the Mo IC of the studied high-temperature Mo deposits. The range of the Mo IC in one single deposit, the Alpjahorn, overlaps with the variation range of almost all other published values for Mo IC in Mo deposits. Compared to the molybdenites, the breccia shows an even wider variation of 3.0‰ (δ98/95Mo between −1.6‰ and +1.4‰). In contrast to the high-T molybdenite deposits, here the Mo was transported via oxidized surface waters into the breccia system, where it was reduced and precipitated. This indicates that oxidation and reduction of Mo complexes may lead to highly variable Mo IC in hydrothermal systems.  相似文献   

15.
Non-conservative behaviour of dissolved Mo was observed during specific time periods in the water column of the Wadden Sea of NW Germany. In July 2005 dissolved Mo declined within 36 h from a level only slightly below seawater (82 nM) to a minimum value of 30 nM, whereas in August 2002 dissolved Mo revealed a tidal cyclicity with maximum values up to 158 nM at low tide. In contrast, cruises in August 2003 and 2004 displayed an almost conservative behaviour of Mo. The decrease in dissolved Mo during July 2005 and elevated values in August 2002 were accompanied by Mo enrichments on aggregates in the water column of the Wadden Sea. Along with Mo, dissolved Mn showed unusual concentration patterns in July 2005, with values distinctly below the common summer level (by a factor of five). A direct relation between the loss of Mo and scavenging by freshly formed MnOx phases could not be inferred from our data because both metals revealed inverse patterns. Parallel to decreasing dissolved Mo concentrations dissolved Mn showed an increasing trend while particulate Mn decreased. Such finding is compatible with the formation of oxygen-depleted zones in aggregates, which provide suitable conditions for the rapid fixation of Mo and parallel release of Mn by chemically and/or microbially mediated processes. Our assumption is supported by biological (e.g. number of aggregate-associated bacteria) and sedimentological (e.g. aggregate abundance and size) parameters. The production of organic components (e.g. TEP) during breakdown of an algae bloom in July 2005 led to the formation of larger Mo-enriched aggregates, thus depleting the water column in dissolved Mo. After deposition on and incorporation into sandy tidal flats these aggregates are rapidly decomposed by microbial activity. Pore water profiles document that during microbial decomposition of these aggregates, substantial amounts of Mo are released and may replenish and even enrich Mo in the open water column. We postulate a conceptual model for the observed non-conservative behaviour of Mo in coastal waters, which is based on the tight coupling of geochemical, biological, and sedimentological processes.  相似文献   

16.
The East Qinling–Dabie orogenic belt accommodates the largest Mo ore district in the world. It contains 8.43 Mt of proven Mo metal reserves which accounts for 66% of the total proven Chinese Mo reserves. The Mo ore district includes 24 deposits and 12 occurrences, with four major types of Mo mineral systems, i.e., porphyry, porphyry-skarn, skarn and hydrothermal veins. The latter can be further subdivided into quartz vein and carbonatite vein types. Although Mo mineralization in the belt began in the Paleoproterozoic (1680 ± 24 to 2044 ± 14 Ma), all economically significant deposits were formed during the Mesozoic. Re/Os dating of molybdenite has shown that there are three episodes of Mo mineralization, i.e., Late Triassic (233–221 Ma), Late Jurassic to Early Cretaceous (148–138 Ma) and Early to middle Cretaceous (131–112 Ma).Late Triassic Mo deposits developed as molybdenite–quartz veins and carbonatite vein types. Stable isotope systematics (C, O, S) and high contents of Re and Sr indicate that the carbonatite Mo veins are mantle-derived. Porphyry and porphyry–skarn Mo mineral deposits were formed in the Late Jurassic to Early Cretaceous and Early to middle Cretaceous. The Late Jurassic to Early Cretaceous granite porphyries that are associated with the Mo deposits usually occupy less than 1.5 km2 at the surface and are situated in the East Qinling area, far west of China's continental margin. On the other hand, the Early to middle Cretaceous batholiths and granite porphyries, , with associated Mo deposits are located in the Dabieshan area and eastern part of the East Qinling area. The Late Jurassic to Early Creataceous granitoids and related Mo deposits possibly formed in a back-arc extensional setting of the Eurasian continental margin, which was probably triggered by the oblique subduction of the Izanagi plate. The Early to middle Cretaceous batholiths and granite porphyries are linked to the tectonic regime of lithospheric thinning, asthenospheric upwelling and partial melting of the crust, induced by a change in Izanagi Plate motion parallel to the continent margin.In the East Qinling–Dabie belt there are vein type Pb–Zn–Ag deposits surrounding porphyry and/or porphyry–skarn Mo (W) deposits, forming well defined ore clusters. The same spatial arrangement (i.e., porphyry Mo stockworks and outlying Pb–Zn–Ag ore veins) is also observed at the deposit scale. Thus, Mo porphyry stockworks and distal polymetallic veins belong to the same ore system and may reflect an outward temperature decrease from the highly fractionated granite plutons. Both, porphyry stockworks and polymetallic veins, can be used as vectors for further prospecting.  相似文献   

17.
Molybdenum concentration and δ98/95Mo values for NIST SRM 610 and 612 (solid glass), NIST SRM 3134 (lot 891307; liquid) and IAPSO seawater reference material are presented based on comparative measurements by MC‐ICP‐MS performed in laboratories at the Universities of Bern and Oxford. NIST SRM 3134 and NIST SRM 610 and 612 were found to have identical and homogeneous 98Mo/95Mo ratios at a test portion mass of 0.02 g. We suggest, therefore, that NIST SRM 3134 should be used as reference for the δ–Mo notation and to employ NIST SRM 610 or 612 as solid silicate secondary measurement standards, in the absence of an isotopically homogeneous solid geological reference material for Mo. The δ98/95MoJMC Bern composition (Johnson Matthey ICP standard solution, lot 602332B as reference) of NIST SRM 3134 was 0.25 ± 0.09‰ (2s). Based on five new values, we determined more precisely the mean open ocean δ98/95MoSRM 3134 value of 2.09 ± 0.07‰, which equals the value of δ98/95MoJMC Bern of 2.34 ± 0.07‰. We also refined the Mo concentration data for NIST SRM 610 to 412 ± 9 μg g?1 (2s) and NIST SRM 612 to 6.4 ± 0.7 μg g?1 by isotope dilution. We propose these concentration data as new working values, which allow for more accurate in situ Mo determination using laser ablation ICP‐MS or SIMS.  相似文献   

18.
《Chemical Geology》2007,236(1-2):13-26
We examined the coprecipitation behavior of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides under two different fluoride forming conditions: at < 70 °C in an ultrasonic bath (denoted as the ultrasonic method) and at 245 °C using a Teflon bomb (denoted as the bomb method). In the ultrasonic method, small amounts of Ti, Mo and Sn coprecipitation were observed with 100% Ca and 100% Mg fluorides. No coprecipitation of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides occurred when the sample was decomposed by the bomb method except for 100% Ca fluoride. Based on our coprecipitation observations, we have developed a simultaneous determination method for B, Ti, Zr, Nb, Mo, Sn, Sb, Hf and Ta by Q-pole type ICP-MS (ICP-QMS) and sector field type ICP-MS (ICP-SFMS). 9–50 mg of samples with Zr–Mo–Sn–Sb–Hf spikes were decomposed by HF using the bomb method and the ultrasonic method with B spike. The sample was then evaporated and re-dissolved into 0.5 mol l− 1 HF, followed by the removal of fluorides by centrifuging. B, Zr, Mo, Sn, Sb and Hf were measured by ID method. Nb and Ta were measured by the ID-internal standardization method, based on Nb/Mo and Ta/Mo ratios using ICP-QMS, for which pseudo-FI was developed and applied. When 100% recovery yields of Zr and Hf are expected, Nb/Zr and Ta/Hf ratios may also be used. Ti was determined by the ID-internal standardization method, based on the Ti/Nb ratio from ICP-SFMS. Only 0.053 ml sample solution was required for measurement of all 9 elements. Dilution factors of ≤ 340 were aspirated without matrix effects. To demonstrate the applicability of our method, 4 carbonaceous chondrites (Ivuna, Orgueil, Cold Bokkeveld and Allende) as well as GSJ and USGS silicate reference materials of basalts, andesites and peridotites were analyzed. Our analytical results are consistent with previous studies, and the mean reproducibility of each element is 1.0–4.6% for basalts and andesites, and 6.7–11% for peridotites except for TiO2.  相似文献   

19.
Small hexagonal and triangular platelets of molybdenite (MoS2), 5 to 25 m in diameter, were identified in phenocrysts and matrix glass of unaltered felsic volcanic rocks from Pantelleria, Italy. The MoS2 occurs commonly in pantellerites (peralkaline rhyolites), rarely in pantelleritic trachytes, and never in trachytes. The occurrence of euhedral MoS2 platelets in all phenocryst phases, in matrix glass, and even in some melt inclusions indicates that MoS2 precipitated directly from the peralkaline melt. Despite MoS2 saturation, the melt (glass) contains greater than 95% of the Mo in Pantellerian rocks: X-ray fluorescence analyses of 20 whole rocks and separated glasses show that whole rocks consistently contain less Mo than corresponding matrix glasses, the differences being in proportion to phenocryst abundances. The Mo contents increase with differentiation from trachytes (2–12 ppm) to pantellerites (15–25 ppm) and correlate positively with incompatible elements such as Th, Y, and Nb. The Mo concentrations, as determined by secondary ion mass spectrometry, are essentially the same in matrix glasses and melt inclusions, showing that Mo did not partition strongly into a volatile fluid phase during outgassing. The high Mo contents of the pantellerites (relative to metaluminous magmas with 1–5 ppm) may be due to several factors: (1) the enhanced stability of highly charged cations (such as Mo6+, U4+, and Zr4+) in peralkaline melts; (2) the rarity of Fe-Ti oxides and litanite into which Mo might normally partition; (3) reduced volatility of Mo in low fO2, H2O-poor (1–2 wt%) peralkaline magmas. Geochemical modeling indicates that the precipitation of MoS2 can be explained simply by the drop in temperature during magmatic differentiation. The occurrence of MoS2 in pantellerites may result from their high Mo concentrations and low redox state (Ni/NiO=-2.5) relative to metaluminous magmas, causing them to reach MoS2 saturation at magmatic temperatures. The apparent absence of MoS2 microphenocrysts in more oxidized, metaluminous rhyolites may indicate that Mo is dissolved primarily as a hexavalent ion in those magmas.  相似文献   

20.
The solubility of molybdenum (Mo) was determined at temperatures from 500 °C to 800 °C and 150 to 300 MPa in KCl-H2O and pure H2O solutions in cold-seal experiments. The solutions were trapped as synthetic fluid inclusions in quartz at experimental conditions, and analyzed by laser ablation inductively coupled plasma mass spectrometry (LA ICPMS).Mo solubilities of 1.6 wt% in the case of KCl-bearing aqueous solutions and up to 0.8 wt% in pure H2O were found. Mo solubility is temperature dependent, but not pressure dependent over the investigated range, and correlates positively with salinity (KCl concentration). Molar ratios of ∼1 for Mo/Cl and Mo/K are derived based on our data. In combination with results of synchrotron X-ray absorption spectroscopy of individual fluid inclusions, it is suggested that Mo-oxo-chloride complexes are present at high salinity (>20 wt% KCl) and ion pairs at moderate to low salinity (<11 wt% KCl) in KCl-H2O aqueous solutions. Similarly, in the pure H2O experiments molybdic acid is the dominant species in aqueous solution. The results of these hydrothermal Mo experiments fit with earlier studies conducted at lower temperatures and indicate that high Mo concentrations can be transported in aqueous solutions. Therefore, the Mo concentration in aqueous fluids seems not to be the limiting factor for ore formation, whereas precipitation processes and the availability of sulfur appear to be the main controlling factors in the formation of molybdenite (MoS2).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号