首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 156 毫秒
1.
Rivers may dramatically change course on a fluvial plain. Such an avulsion temporarily leads to two active channels connected at a bifurcation. Here we study the effect of dynamic meandering at the bifurcation and the effect of channel width adjustment to changing discharge in both downstream branches on the evolution of a bifurcation and coexisting channels. As an example, we reconstructed the last major avulsion at the Rhine delta apex. We combined historical and geological data to reconstruct a slowly developing avulsion process spanning 2000 years and involving channel width adjustment and meandering at the bifurcation. Based on earlier idealised models, we developed a one‐dimensional model for long‐term morphodynamic prediction of upstream channel and bifurcates connected at the bifurcation node. The model predicts flow and sediment partitioning at the node, including the effect of migrating meanders at the bifurcation and channel width adjustment. Bifurcate channel width adaptation to changing discharge partitioning dramatically slows the pacing of bifurcation evolution because the sediment balance for width adjustment and bed evolution are coupled. The model further shows that meandering at the bifurcation modulates channel abandonment or enlargement periodically. This explains hitherto unrecognised reactivation signals in the sedimentary record of the studied bifurcation meander belts, newly identified in our geological reconstruction. Historical maps show that bifurcation migration due to meander bend dynamics increases the bifurcation angle, which increases the rate of closure of one bifurcate. The combination of model and reconstruction identifies the relevant timescales for bifurcation evolution and avulsion duration. These are the time required to fill one downstream channel over one backwater length, the time to translate one meander wavelength downstream and, for strong river banks, the adaptation timescale to adjust channel width. The findings have relevance for all avulsions where channel width can adjust to changing discharge and where meandering occurs. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

2.
Avulsions – relatively sudden changes in course, or establishment of new anabranches – are an important process in alluvial rivers. Their key role in floodplain construction and alluvial architecture, and the general conditions favouring avulsions, are well known. However, avulsion processes and evolution, and the factors controlling avulsion regimes, are poorly understood. In the southeast Texas coastal plain, where avulsions are common features of the river valleys, avulsions were studied on the lower Brazos, Navasota, Trinity, Neches and Sabine rivers using a combination of aerial imagery, digital elevation models and field surveys. Avulsions have important influences on the surface morphology and contemporary processes in all five rivers. Features associated with avulsions are active and distinct throughout the study area, and all the rivers have experienced geologically (if not historically) recent avulsions. However, no two of the study rivers have the same contemporary avulsion regime. First‐order differences in avulsion style are controlled by the stage of valley filling, and within the three rivers characterized by an unfilled incised valley, antecedent morphology associated with late Quaternary and Holocene coastal and fluvial‐deltaic processes accounts for the major differences. In the Navasota (27 avulsions in 185 km) and Neches (21 in 340 km) rivers, subchannels associated with avulsions exist in all stages of development from active to infilled, and some have occurred in recent decades. The other rivers have fewer avulsions, but both the Sabine and Trinity have experienced historic channel shifts. Only the Brazos River has experienced no avulsions within the past c. 300 years. Results show that even within a region of similar environmental controls and geological history local variations in inherited morphology can result in different avulsion regimes. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

3.
Physics‐based models have been increasingly developed in recent years and applied to simulate the braiding process and evolution of channel units in braided rivers. However, limited attention is given to lowland braided rivers where the transport of suspended sediment plays a dominant role. In the present study, a numerical model based on the basic physics laws of hydrodynamics and sediment transport is used to simulate the evolution process of a braided river dominated by suspended load transport. The model employs a fractional method to simulate the transport of graded sediments and uses a multiple‐bed‐layer approach to represent the sediment sorting process. An idealized braided river has been produced, with the hydrodynamic, sediment transport and morphological processes being analysed. In particular, the formation process of local pool–bar units in the predicted river has been investigated. A sensitivity analysis has also been undertaken to investigate the effects of grid resolution and an upstream perturbation on the model prediction. A variety of methods are applied to analyse the geometrical and topographical properties of the modelled river. Self‐organizing characteristics related to river geometry and topography are analysed by state‐space plots, which indicate a close relationship with the periodical erosion and deposition cycles of braiding. Cross‐sectional topography and slope frequency display similar geometries to natural rivers. Scaling characteristics are found by correlation analysis of bar parameters. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

4.
Previous analyses have identified the active width of braided rivers, the bed area over which bed load flux and short‐term morphological change occurs, as an important element of braiding dynamics and predictions of bed load flux. Here we compare theoretical predictions of active width in gravel‐bed braided rivers with observations from Sunwapta River, and from a generic physical model of gravel braided rivers, to provide general observations of the variation in active width, and to develop an understanding of the causes of variation. Bed topography was surveyed daily along a 150 m reach of the pro‐glacial Sunwapta River for a total of four weeks during summer when flow was above threshold for morphological activity. In the laboratory, detailed digital elevation models (DEMs) were derived from photogrammetric survey at regular intervals during a constant discharge run. From the field and flume observations there is considerable local and circumstantial variation in active width, but also a general trend in average active width with increasing discharge. There is also a clear relationship of active width with active braiding index (number of active branches in the braided channel network), and with dimensionless stream power, which appears to be consistent across the range of data from field and physical models. Thus there is a link between active width and the river morphology and dynamics, and the possibility of a general relationship for estimating active width from channel pattern properties or reach‐scale stream power values, from which approximate bedload flux calculations may be made. The analysis also raises questions about differences between hydraulically‐based numerical model computations of instantaneous active width and observation of time‐integrated morphological active width. Understanding these differences can give insight into the nature of bedload transport in braided rivers and the relationship to morphological processes of braiding. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

5.
Anastomosing rivers have multiple interconnected channels that enclose flood basins. Various theories potentially explain this pattern, including an increased discharge conveyance and sediment transport capacity of multiple channels, deltaic branching, avulsion forced by base‐level rise, or a tendency to avulse due to upstream sediment overloading. The former two imply a stable anabranching channel pattern, whereas the latter two imply disequilibrium and evolution towards a single‐channel pattern in the absence of avulsion. Our objective is to test these hypotheses on morphodynamic scenario modelling and data of a well‐documented case study: the upper Columbia River. Proportions of channel and floodplain sediments along the river valley were derived from surface mapping. Initial and boundary conditions for the modelling were derived from field data. A 1D network model was built based on gradually varied flow equations, sediment transport prediction, mass conservation, transverse slope and spiral meander flow effects at the bifurcations. The number of channels and crevasse splays decreases in a downstream direction. Also, measured sediment transport is higher at the upstream boundary than downstream. These observations concur with bed sediment overloading from upstream, which can have caused channel aggradation above the surrounding floodplain and subsequent avulsion. The modelling also indicates that avulsion was likely caused by upstream overloading. In the model, multi‐channel systems inevitably evolve towards single‐channel systems within centuries. The reasons are that symmetric channel bifurcations are inherently unstable, while confluenced channels have relatively less friction than two parallel channels, so that more discharge is conveyed through the path with more confluences and less friction. Furthermore, the present longitudinal profile curvature of the valley could only be reproduced in the model by temporary overfeeding. We conclude that this anastomosing pattern is the result of time‐varying sediment overloading and is not an equilibrium pattern feature, and suggest this is valid for many anastomosing rivers. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

6.
We modify a simple numerical stream‐pattern model to examine the effect of sediment stabilization by roots on the channel pattern of bedload rivers. In the model, vegetation enhances bank resistance to erosion, causing the development of a single channel instead of a rapidly changing, multiple channel (braided) pattern. Net aggradation resulting from a high sediment supply, however, causes frequent avulsions that destroy vegetation locally, leading to the development of a multiple‐channel pattern. A stability diagram representing multiple model runs predicts whether a river will exhibit single or multiple channels, based on plant‐enhanced bank strength, and on the time scale of plant development relative to a time scale for change in unvegetated channels. A second stability diagram predicts the way in which the amplitude and period of a fluctuating imposed sediment load influence whether a single or multiple‐channel pattern develops. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

7.
We have shown in a previous paper that many of the main features of braided streams can be captured in a relatively simple cellular computer model. Here we examine some of the detailed characteristics of this model. We show the qualitative form of the braiding produced by the model is generally insensitive to changes in most of the numerical parameters used in the model. The most crucial parameter choice is the use of a non-linear exponent (>1) to describe the relation between sediment flux and local stream power. Use of water discharge instead of stream power to parameterize sediment flux produces braiding, but also unrealistically high-amplitude topography variations in the long term. Introduction of a threshold transport condition causes no noticeable change in the model's behaviour. Inclusion of lateral sediment transport due to gravitational effects on lateral slopes is not crucial to produce braiding, but is needed to provide reasonable lateral channel shifting, and to maintain a continuing dynamic behaviour. As long as lateral sediment transport is included, altering the initial topography for a run has no effect, other than a transient period of regrading. In addition, we show that there is a simple and apparently fundamental connection between braided-stream channel networks and erosional (dendritic) networks that has not been previously recognized. All that is needed to switch the model from braided to dendritic patterns is either to remove redeposition from the rules, simulating entrainment of cohesive sediment, or to add a cliff to the initial topography, making local redeposition unimportant. This result suggests that the presence or absence of significant local redeposition, which causes bar formation, channel division, and avulsion, determines whether a braided or dendritic pattern will form. © 1997 John Wiley & Sons, Ltd.  相似文献   

8.
Meander bends of many large, sand‐bed meandering rivers are partitioned by chute channels that convey permanent flow, and co‐exist with the mainstem for decades. As a first step toward understanding the dynamics and morphodynamic implications of these ‘bifurcate meander bends’, this study applied binary logistic regression analysis to determine whether it is possible to predict chute initiation based on attributes of meander bend character and dynamics. Regression models developed for the Strickland River, Papua New Guinea, the lower Paraguay River, Paraguay/Argentina, and the Beni River, Bolivia, revealed that the probability of chute initiation at a meander bend is a function of the bend extension rate (the rate at which a bend elongates in a direction perpendicular to the valley axis trend). Image analyses of all rivers and field observations from the Strickland suggest that the majority of chute channels form during scroll–slough development. Rapid extension is shown to favour chute initiation by breaking the continuity of point bar deposition and vegetation encroachment at the inner bank, resulting in widely‐spaced scrolls with intervening sloughs that are positively aligned with primary over‐bar flow. The rivers plot in order of increasing chute activity on an empirical meandering‐braided pattern continuum defined by potential specific stream power (ωpv) and bedload calibre (D50). Increasing stream power is considered to result in higher bend extension rates, with implications for chute initiation. In addition, chute stability is shown to depend on river sediment load relative to flow discharge (Qs/Q), such that while the Beni may plot in the region of highly braided rivers by virtue of a high potential specific stream power, the formation of stable chute channels is suppressed by the high sediment load. This tendency is consistent with previous experimental studies, and results in a planform that is transitional between single‐thread meandering and braided. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

9.
The major bedforms of gravel bed rivers, whether braided, meandering or straight, may be usefully resolved into pool-riffle units, each comprising a single scour pool together with an associated depositional shoal downstream. At low flow, the latter may be characterized by a single emergent bar-head and submerged riffle, or by a variety of remnant braid bars, depending upon the type of channel. Identification of pool-riffle units and observation of associated flow structures on a small meandering stream in northwest England has demonstrated important links between bedforms, flow patterns and channel change. Each unit appears to be associated with a systematic pattern of secondary flows, which are able to modify the bedforms and initiate meander development. Feedback links between plan morphology, flow patterns and erosive and depositional forces within these units ensure that each stage of meander growth has a characteristic style of channel change. Consequently, meanders tend to evolve by regular cycles of increasing curvature and complexity.  相似文献   

10.
Compound meander bends with multiple lobes of maximum curvature are common in actively evolving lowland rivers. Interaction among spatial patterns of mean flow, turbulence, bed morphology, bank failures and channel migration in compound bends is poorly understood. In this paper, acoustic Doppler current profiler (ADCP) measurements of the three‐dimensional (3D) flow velocities in a compound bend are examined to evaluate the influence of channel curvature and hydrologic variability on the structure of flow within the bend. Flow structure at various flow stages is related to changes in bed morphology over the study timeframe. Increases in local curvature within the upstream lobe of the bend reduce outer bank velocities at morphologically significant flows, creating a region that protects the bank from high momentum flow and high bed shear stresses. The dimensionless radius of curvature in the upstream lobe is one‐third less than that of the downstream lobe, with average bank erosion rates less than half of the erosion rates for the downstream lobe. Higher bank erosion rates within the downstream lobe correspond to the shift in a core of high velocity and bed shear stresses toward the outer bank as flow moves through the two lobes. These erosion patterns provide a mechanism for continued migration of the downstream lobe in the near future. Bed material size distributions within the bend correspond to spatial patterns of bed shear stress magnitudes, indicating that bed material sorting within the bend is governed by bed shear stress. Results suggest that patterns of flow, sediment entrainment, and planform evolution in compound meander bends are more complex than in simple meander bends. Moreover, interactions among local influences on the flow, such as woody debris, local topographic steering, and locally high curvature, tend to cause compound bends to evolve toward increasing planform complexity over time rather than stable configurations. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

11.
An analytical modelling framework is proposed to reproduce the frequently observed but poorly studied occurrence of mid‐channel bars in meandering channels. Mid‐channel bars occur in meanders and may characterize transitional morphologies between pure meandering and braided rivers. Based on existing field and experimental observations, we propose that two different mechanisms can generate central topographical patterns in meanders. A former mechanism (‘width‐forced’) is related to spatial width oscillations which determine a laterally symmetrical bed shear stress pattern that promotes mid‐channel bars. A second mechanism (‘curvature‐forced’) can take place also in curvilinear equiwidth streams since also longitudinal variations of channel curvature can produce laterally symmetrical alterations of the sediment transport capacity. A perturbation approach is employed to model both mechanisms within a common framework, allowing reproduction, at least qualitatively, of several observed features. While width‐forced mid‐channel bars are a symmetric linear altimetric response, to reproduce curvature‐forced mid‐channel bars requires modelling nonlinear flow‐bed topography interactions at the second order of the perturbation expansion. Hypotheses on how these mechanisms operate are further discussed through an application to field cases. The amplitude of the nonlinear response can be relevant compared to that of the point bar in equiwidth meanders and the location of mid‐channel bars seldom coincides with bend apexes, mainly depending upon the intrinsic meander wavelength. Central bars tend to symmetrically divert the flow against the two banks, a process which is proposed as a possible cause of cross‐sectional overwidening, along with the asymmetry between the rates of bank erosion and of the opposite bank accretion. The outcomes of this first modelling step on the subject allow discussion of the mutual feedback processes that characterize interactions between mid‐channel bars and width variations in river meanders. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

12.
Bedload pulses in gravel-bed rivers have been widely reported in recent years and attempts have been made to relate them to channel morphology. Bedload transport and channel morphology were measured in a small-scale generic model of braided gravel-bed streams. Two experiments are described in which braided channels developed in a 14 m × 3 m sand tray. Total bedload output from the tray was weighed every 15 minutes. Stream bed geometry was surveyed every four hours. Pulses were observed in the bedload output time series, and were qualitatively related to the channel morphology immediately upstream of the measuring section. The Bagnold (1980) bedload equation generally overpredicts measured bedload transport rates when applied to channels that were in equilibrium or aggrading. Underprediction occurred when applied to degrading channels. Aggradation was associated with channel multiplication and bar deposition. Channel pattern simplification occurred when degradation took place, and bars emerged from the water flow. Development of phases of aggradation and degradation is dependent upon the three-dimensional geometry of the stream beds. Spatial and temporal feedback loops can be identified, enabling links between channel morphology and bedload transport rate to be directly identified.  相似文献   

13.
River meandering has been successfully modelled using vector based methods, but these can not simulate multiple or braided channels. Conversely, cellular braided river models fail to replicate meandering. This paper describes a new method to simulate river meandering within a cellular model (CAESAR). A novel technique for determining bend radius of curvature on a cell by cell basis is described, that importantly allows regional information on bend curvature to be transferred to local points. This local curvature is then used to drive meandering and lateral erosion through two methods. Key difficulties are identified, including the deposition of material on point bars and cut off development, but the method illustrates how meandering can be integrated within a cellular framework. This demonstrates the potential to produce a single model that can incorporate both meandering and braiding. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

14.
In meandering rivers cut into bedrock, erosion across a channel cross‐section can be strongly asymmetric. At a meander apex, deep undercutting of the outer bank can result in the formation of a hanging cliff (which may drive hillslope failure), whereas the inner bank adjoins a slip‐off slope that connects to the hillslope itself. Here we propose a physically‐based model for predicting channel planform migration and incision, point bar and slip‐off slope formation, bedrock abrasion, the spatial distribution of alluvial cover, and adaptation of channel width in a mixed bedrock‐alluvial channel. We simplify the analysis by considering a numerical model of steady, uniform bend flow satisfying cyclic boundary conditions. Thus in our analysis, ‘sediment supply’, i.e. the total volume of alluvium in the system, is conserved. In our numerical simulations, the migration rate of the outer bank is a specified parameter. Our simulations demonstrate the existence of an approximate state of dynamic equilibrium corresponding to a near‐solution of permanent form in which a bend of constant curvature, width, cross‐sectional shape and alluvial cover distribution migrates diagonally downward at constant speed, leaving a bedrock equivalent of a point bar on the inside of the bend. Channel width is set internally by the processes of migration and incision. We find that equilibrium width increases with increasing sediment supply, but is insensitive to outer bank migration rate. The slope of the bedrock point bar varies inversely with both outer bank migration rate and sediment supply. Although the migration rate of the outer bank is externally imposed here, we discuss a model modification that would allow lateral side‐wall abrasion to be treated in a manner similar to the process of bedrock incision. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

15.
A series of laboratory experiments demonstrates that riparian vegetation can cause a braided channel to self‐organize to, and maintain, a dynamic, single‐thread channel. The initial condition for the experiments was steady‐state braiding in non‐cohesive sand under uniform discharge. From here, an experiment consisted of repeated cycles alternating a short duration high flow with a long duration low flow, and uniform dispersal of alfalfa seeds over the bed at the end of each high flow. Plants established on freshly deposited bars and areas of braidplain that were unoccupied during low flow. The presence of the plants had the effect of progressively focusing the high flow so that a single dominant channel developed. The single‐thread channel self‐adjusted to carry the high flow. Vegetation also slowed the rate of bank erosion. Matching of deposition along the point bar with erosion along the outer bend enabled the channel to develop sinuosity and migrate laterally while suppressing channel splitting and the creation of new channel width. The experimental channels spontaneously reproduced many of the mechanisms by which natural meandering channels migrate and maintain a single dominant channel, in particular bend growth and channel cutoff. In contrast with the braided system, where channel switching is a nearly continuous process, vegetation maintained a coherent channel until wholesale diversion of flow via cutoff and/or avulsion occurred, by which point the previous channel tended to be highly unfavorable for flow. Thus vegetation discouraged the coexistence of multiple channels. Varying discharge was key to allowing expression of feedbacks between the plants and the flow and promoting the transition from braiding to a single‐thread channel that was then dynamically maintained. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

16.
The evolution of the Yellow River delta is characterized by heavy sediment load,rapid seaward migration,frequent avulsions,and intense anthropogenic disturbances.Evolution of the delta channel following avulsions is very complex and has not yet been thoroughly understood.In the research presented by this paper,we conducted comprehensive analyses of the changes in the water stages,slopes,longitudinal profiles,and the erosion and deposition in the Yellow River delta channels during a time period of over five decades.Results showed that,following each avulsion,channels migrated seaward at decaying rates and the slopes at the downstream of the avulsion point decreased exponentially with time and completed its major adjustment within about four to five years.A generalized geometric model was proposed to describe the changes in the longitudinal profiles of the delta channels.A calculation method to determine the characteristic water stages at the delta was proposed based on the geometric model and the delayed response model for the morphological responses of fluvial rivers to perturbations.Water stages corresponding to a discharge of 3000 m3/s at Lijin and Xihekou during 1954 through 2012 were calculated by using the proposed method.The proposed method may be used to predict the evolution of the delta channels in response to artificial avulsions at the Yellow River delta in the future.  相似文献   

17.
Hydraulic modelling principles, together with a knowledge of channel pattern thresholds, allow the development of a small scale model of a gravel braided stream with flow characteristics and equivalent dimensions of a natural river. The forms and processes of natural gravel braided rivers are reproduced by imposing a constant flume discharge and slope, and maintaining approximate equilibrium with an adjustable sediment feed. Beginning from a straight trough, braiding is initiated by development of a series of alternating bars and scour pools which produce bends of increasing amplitude, leading finally to channel division. These lobate bars accrete downstream by deposition of bed material at their margins, often in the form of avalanche faces. Together with the scour pools with which they are necessarily closely associated, these bars are the fundamental elements of the channel pattern. Channel migration and division is a response to the development of bars, and these adjustments leave portions of the originally active bars in the form of exposed and eroded remnants. Complex flats built from these lobate forms show varying degrees of preservation of the original depositional units, but the model allows observation of the systematic construction of some flats. Sorting of sediment on active bars with avalanche faces shows a distinct fining downstream. This may be the result of the accretion of fining upwards avalanche faces along the bar margins rather than a ‘winnowing out’ of fine material. The processes and forms observed in the model appear to be very similar to those occurring in natural gravel braided streams during peak flows.  相似文献   

18.
A depth‐averaged linearized meander evolution model was calibrated and tested using the field data collected at the Quinn River in the Black Rock Desert, Nevada. Two approaches used to test the model were: (1) simulating meander evolution and comparing the results with the observed 38 year migration pattern; and (2) fitting the model parameters to present bank asymmetry (the ratio of the maximum bank gradients on opposite sides of the channel). The data required as input were collected in the field during a high flow in May 2011 and from aerial photographs and LiDAR data. Both approaches yielded similar results for the best fit parameter values. The bank asymmetry analysis showed that the bank asymmetry and the velocity perturbation have high correlation at close to zero spatial lag while the maximum correlation between the bank asymmetry and maximum bend curvature is offset by about 25 m. The model sufficiently replicated 38 years of channel migration, with a few locations significantly under‐ or over‐predicted. Inadequacies of the flow model and/or variation in bank properties unaccounted for are most likely the causes for these discrepancies. Flow through the Quinn River was also simulated by a more general 3D model. The downstream pattern of near‐bank shear stresses simulated by the 3D model is nearly identical to those resulting from the linearized flow model. Topographic profiles across interior bends are essentially invariant over a wide range of migration rates, suggesting that the traditional formulation that cut bank erosion processes govern migration rates is appropriate for the Quinn River. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

19.
A. B. Murray and C. Paola (1994, Nature, vol. 371, pp. 54–57; 1997, Earth Surface Processes and Landforms, vol. 22, pp. 1001–1025) proposed a cellular model for braided river dynamics as an exploratory device for investigating the conditions necessary for the occurrence of braiding. The model reproduces a number of the general morphological and dynamic features of braided rivers in a simplified form. Here we test the representation of braided channel morphodynamics in the Murray–Paola model against the known characteristics (mainly from a sequence of high resolution digital elevation models) of a physical model of a braided stream. The overall aim is to further the goals of the exploratory modelling approach by first investigating the capabilities and limitations of the existing model and then by proposing modifications and alternative approaches to modelling of the essential features of braiding. The model confirms the general inferences of Murray and Paola (1997) about model performance. However, the modelled evolution shows little resemblance to the real evolution of the small‐scale laboratory river, although this depends to some extent on the coarseness of the grid used in the model relative to the scale of the topography. The model does not reproduce the bar‐scale topography and dynamics even when the grid scale and amplitude of topography are adapted to be equivalent to the original Murray–Paola results. Strong dependence of the modelled processes on local bed slopes and the tendency for the model to adopt its own intrinsic scale, rather than adapt to the scale of the pre‐existing topography, appear to be the main causes of the differences between numerical model results and the physical model morphology and dynamics. The model performance can be improved by modification of the model equations to more closely represent the water surface but as an exploratory approach hierarchical modelling promises greater success in overcoming the identified shortcomings. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

20.
Avulsion, the natural relocation of a river, is a key process in the evolution of subaerial fans, river floodplains and deltas. The causes of avulsion are poorly understood, which is partly due to the scarcity of field studies of present avulsions. At present, two avulsions are occurring on the middle and lower Taquari megafan, Pantanal basin, south‐western Brazil. Here we present an analysis of the causes of these avulsions based on field and remote sensing data and show that avulsions on megafans can be controlled by both upstream and downstream processes. The middle fan avulsion (started in 1997–1998) is a result of upstream control: overbank aggradation was caused by the (variable) input of sandy sediment into the system, which caused channel‐belt superelevation and also created an easily erodible subsurface favouring bank retreat, crevassing, and scour of deep floodplain channels. The sandy subsurface in this area is inferred to have been a major factor in the causation of this avulsion under conditions of little gradient advantage. The lower fan avulsion (started c. 1990) results from interplay of upstream and downstream controls, the latter being related to the local base level (the Paraguay River floodplain) at the toe of the fan. Channel and overbank aggradation on the lower fan was influenced by fan sub‐lobe progradation and channel backfilling. Fan sub‐lobe progradation caused a significant gradient advantage of the avulsion channel over the parent channel. Avulsions are commonly supposed to be preferentially triggered by high‐magnitude floods, when there is considerable channel‐belt superelevation. However, both avulsions studied by us were triggered by small to average floods, with modest channel‐belt superelevation. We conclude that flood magnitude and channel‐belt superelevation have been overrated as causes of avulsion, and demonstrate additional causes that influence the growth of crevasses into avulsions. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号