共查询到20条相似文献，搜索用时 46 毫秒
1.
Hirokazu Moriya 《Geophysical Prospecting》2008,56(5):667-676
I present a statistical method for detecting the arrival times of polarized seismic waves on three-component seismic observations in the time and frequency domains. In this method, the polarization, which is a representation of the 3D particle motion of seismic waves, is evaluated on the basis of a spectral matrix in the time and frequency domains and the statistical parameters are defined by using the eigenvalues of the spectral matrix for detecting the arrival times of linearly and elliptically polarized waves, where the idea of a statistical test of hypothesis is introduced. An evaluation of a synthetic signal revealed that the method can detect the arrival times of linearly and elliptically polarized waves within 10 sampling points at signal-to-noise ratios of −7 dB. Application of the method to an earthquake suggested that it can be used to detect the arrival times of both linearly and elliptically polarized waves, which are difficult to identify manually. 相似文献
2.
A main purpose of groundwater inverse modeling lies in estimating the hydraulic conductivity field of an aquifer. Traditionally, hydraulic head measurements, possibly obtained in tomographic setups, are used as data. Because the groundwater flow equation is diffusive, many pumping and observation wells would be necessary to obtain a high resolution of hydraulic conductivity, which is typically not possible. We suggest performing heat tracer tests using the same already installed pumping wells and thermometers in observation planes to amend the hydraulic head data set by the arrival times of the heat signals. For each tomographic combinations of wells, we recommend installing an outer pair of pumping wells, generating artificial ambient flow, and an inner well pair in which the tests are performed. We jointly invert heads and thermal arrival times in 3-D by the quasi-linear geostatistical approach using an efficiently parallelized code running on a mid-range cluster. In the present study, we evaluate the value of heat tracer versus head data in a synthetic test case, where the estimated fields can be compared to the synthetic truth. Because the sensitivity patterns of the thermal arrival times differ from those of head measurements, the resolved variance in the estimated field is 6 to 10 times higher in the joint inversion in comparison to inverting head data only. Also, in contrast to head measurements, reversing the flow field and repeating the heat-tracer test improves the estimate in terms of reducing the estimation variance of the estimate. Based on the synthetic test case, we recommend performing the tests in four principal directions, requiring in total eight pumping wells and four intersecting observation planes for heads and temperature in each direction. 相似文献
3.
In karst aquifers with significant matrix permeability, water and solutes are exchanged between the conduits and carbonate matrix. Transport through the matrix increases the spread of solutes and increases travel times. This study numerically evaluates advective solute transport in synthetic karst systems that contain 3D branching conduit networks. Particle tracking is performed to analyze the spatial and temporal transport history of solute that arrives at the conduit outlet. Three measures of transport connectivity are used to quantify the solute migration behavior: the skewness of the particle arrival time distribution, the normalized fifth percentile of arrival times, and the fraction of the total travel time that occurs within conduits. All three of these metrics capture the influence of conduit network geometry on solute transport. A more tortuous network leads to enhanced conduit-matrix mixing, which reduces the transport connectivity and yields a broader distribution of solute arrival times. These results demonstrate that the conduit network geometry is an important control on solute transport in karst systems with a permeable matrix. 相似文献
4.
Gómez-Hernández J. J. Wen X. -H. 《Stochastic Environmental Research and Risk Assessment (SERRA)》1994,8(1):19-55
A Monte Carlo approach is described for the quantification of uncertainty on travel time estimates. A real (non synthetic) and exhaustive data set of natural genesis is used for reference. Using an approach based on binary indicators, constraint interval data are easily accommodated in the modeling process. It is shown how the incorporation of imprecise data can reduce drastically the uncertainty in the estimates. It is also shown that unrealistic results are obtained when a deterministic modeling is carried out using a kriging estimate of the transmissivity field. Problems related with using sequential indicator simulation for the generation of fields incorporating constraint interval data are discussed. The final results consists of 95% probability intervals of arrival times at selected control planes reflecting the original uncertainty on the transmissivity maps. 相似文献
5.
A Monte Carlo approach is described for the quantification of uncertainty on travel time estimates. A real (non synthetic) and exhaustive data set of natural genesis is used for reference. Using an approach based on binary indicators, constraint interval data are easily accommodated in the modeling process. It is shown how the incorporation of imprecise data can reduce drastically the uncertainty in the estimates. It is also shown that unrealistic results are obtained when a deterministic modeling is carried out using a kriging estimate of the transmissivity field. Problems related with using sequential indicator simulation for the generation of fields incorporating constraint interval data are discussed. The final results consists of 95% probability intervals of arrival times at selected control planes reflecting the original uncertainty on the transmissivity maps. 相似文献
6.
To conduct forward and simultaneous inversion in a complex geological model, including an irregular topography (or irregular reflector or velocity anomaly), we in this paper combined our previous multiphase arrival tracking method (referred as triangular shortest-path method, TSPM) in triangular (2D) or tetrahedral (3D) cell model and a linearized inversion solver (referred to as damped minimum norms and constrained least squares problem solved using the conjugate gradient method, DMNCLS-CG) to formulate a simultaneous travel time inversion method for updating both velocity and reflector geometry by using multiphase arrival times. In the triangular/tetrahedral cells, we deduced the partial derivative of velocity variation with respective to the depth change of reflector. The numerical simulation results show that the computational accuracy can be tuned to a high precision in forward modeling and the irregular velocity anomaly and reflector geometry can be accurately captured in the simultaneous inversion, because the triangular/tetrahedral cell can be easily used to stitch the irregular topography or subsurface interface. 相似文献
7.
地震定位是地震监测与减灾研究重要基础.基于均匀或横向均匀介质模型,利用震源轨迹确定震源位置的交切法具有稳健和效率高的优点,但定位精度较低,特别是震源深度.为提高震源定位精度,我们提出适用于三维复杂速度模型的地震定位交切法.将地壳速度模型由均匀或横向均匀介质模型扩展为三维复杂速度模型;均匀或横向均匀介质模型对应的原假设为球面或双曲面的震源轨迹通过最小走时树射线追踪技术予以确定.确定震源位置的震源轨迹以到时差作为约束条件;将震源定位于震源轨迹交汇最密集的点处,即总的到时差残差(RDT)最小的点处.定位结果的不确定性可通过RDT值较小节点的空间分布予以定性表示.考察了准确速度模型、扰动速度模型、扰动观测到时及地震在台网外等4种情况下改进方法的地震定位效果,结果表明改进的交切法可用于三维复杂速度模型的地震定位;综合利用P波与S波的到时差信息,可明显改善震源位置约束;使用多条震源轨迹进行定位,有助于减少由随机因素导致的定位误差. 相似文献
8.
微地震事件初至拾取是井下微地震监测数据处理的关键步骤之一.初至误差的存在会使微地震震源定位结果产生较大偏差,进而影响后续的压裂裂缝解释.通常初至拾取过程对所有的微地震事件选择相同的特征函数并采用一致的拾取参数进行统一处理,然而当事件的能量、震源机制、传播路径以及背景噪声等存在明显差异时,所得初至拾取结果差别显著.为了提高微地震事件初至拾取标准一致性,本文提出基于波形相似特征的初至拾取及全局校正方法.该方法首先利用互相关函数对每个事件内的各道记录进行时差校正,得到初始初至信息并形成叠加道,再对所有事件的叠加道进行全局互相关得到事件间初至相对校正量,最终初至结果可以通过各个事件的初始初至信息与其相对校正量相加得到.方法将所有微地震事件初至结果作为一个整体处理,从而能够克服常规方法初至拾取标准一致性差的缺陷.实际资料处理结果表明,相比于常规方法,该方法可以有效提高事件初至拾取和定位结果的一致性. 相似文献
9.
10.
Introduction Usually there are abundantly transient high-frequency compositions and weak amplitudes at the onset of a gradually changing signal. Using the method of the fixed scale wavelet transforma- tion ratio, we tried to display and measure the onset time or first arrival time. Unfortunately, the ratio method is lack of the stability. To reduce the noise influence on the ratio, reveal the arrival time information and improve the measurement precision of the arrival time of the gradually ch… 相似文献
11.
12.
震源定位是微地震监测技术要解决的主要问题.目前,井下微地震监测多采用走时拟合法计算震源位置.常规方法受到环境噪声、初至拾取误差、速度模型误差等因素的影响,定位结果存在一定误差.为了提高定位精度,本文提出了一种改进的基于网格搜索的微地震震源定位方法.本文方法根据P波的偏振特征参数计算概率密度函数求取震源方位角,并采用改进的目标函数和搜索算法计算震源的径向距离和深度.模型数据和实际资料的处理结果表明,本文方法具有较强的抗噪性,计算得到的震源方位角更加接近真实值;与常规目标函数相比,本文方法采用的目标函数具有更好的收敛性,其定位结果受初至拾取误差和速度模型误差的影响更小;本文提出的搜索算法能够消除由于错误拾取造成的观测到时中的异常值对定位结果的影响. 相似文献
13.
Field MS 《Ground water》2008,46(1):156-159
Calculation of time of travel from tracing studies in hydrologic systems is critical to establishing pollutant arrival times from points of inflow to points outflow, calculating subsurface flow velocities, and determining other important transport parameters such as longitudinal dispersion. In addition, breakthrough curve modeling demands accurate time of travel calculations if model results are to have any realistic meaning. However, accurate time of travel calculations are very difficult for long tracer tests in which sampling schedules are not consistent, or when there are major disruptions such as may occur when adverse weather conditions cause automatic sampling equipment to fail. Long and inconsistent sampling times may be accurately converted to decimal times of travel by converting the conventionally recorded Coordinated Universal Time for sampling date and time event to a baseline time standard. By converting to a baseline time standard, all recorded dates and times are linked to the established baseline standard so that each succeeding sampling date and time are correctly determined relative to the previous sampling date and time and to the injection date and time. 相似文献
14.
Performance assessments of repositories for the underground disposal of nuclear fuel and waste include models of ground water flow and transport in the host rocks. Estimates of hydraulic conductivity, K, based on field measurements may require adjustment (upscaling) for use in numerical models, but the choice of upscaling approach can be complicated by the use of nested modeling, large-scale fracture zones, and a high degree of heterogeneity. Four approaches to upscaling K are examined using a reference case based on exhaustive site data and an application of nested modeling to evaluate performance assessment of a waste repository. The upscaling approaches are evaluated for their effects on the flow balance between nested modeling domains and on simple measures of repository performance. Of the upscaling approaches examined in this study, the greatest consistency of boundary flows was achieved using the observed scale dependence for the rock domains, measured values from the large-scale interference test for the conductor domain, and a semivariogram regularization based on the Moye model for packer test interpretation. Making the assumption that large fracture zones are two-dimensional media results in the greatest changes to the median of travel time and improves the flow balance between the nested models. The uncertainty of upscaling methods apparently has a small impact on median performance measures, but a significant impact on the variances and earliest arrival times. 相似文献
15.
The need to obtain more reliable Earth structures has been the impetus for conducting joint inversions of disparate geophysical datasets. For seismic arrival time tomography, joint inversion of arrival time and gravity data has become an important way to investigate velocity structure of the crust and upper mantle. However, the absence of an efficient approach for modeling gravity effects in spherical coordinates limits the joint tomographic analysis to only local scales. In order to extend the joint tomographic inversion into spherical coordinates, and enable it to be feasible for regional studies, we develop an efficient and adaptive approach for modeling gravity effects in spherical coordinates based on the longitudinal/latitudinal grid spacing. The complete gravity effects of spherical prisms, including gravitational potential, gravity vector and tensor gradients, are calculated by numerical integration of the Gauss–Legendre quadrature (GLQ). To ensure the efficiency of the gravity modeling, spherical prisms are recursively subdivided into smaller units according to their distances to the observation point. This approach is compatible with the parameterization of regional arrival time tomography for large areas, in which both the near- and far-field effects of the Earth's curvature cannot be ignored. Therefore, this approach can be implemented into the joint tomographic inversion of arrival time and gravity data conveniently. As practical applications, the complete gravity effects of a single anomalous density body have been calculated, and the gravity anomalies of two tomographic models in the Taiwan region have also been obtained using empirical relationships between P-wave velocity and density. 相似文献
16.
使用震源轨迹确定震源位置不仅稳健而且直观,但当介质复杂时震源轨迹难以给出解析解.基于最小走时树射线追踪技术计算震源轨迹的方法(以轨迹所在的残差场中残差最小的点(初始点)至残差较小的点(震源轨迹代表点)的射线路径表示震源轨迹)适用于复杂速度模型,但尚不能正确计算由多段组成的震源轨迹,同时兼顾计算轨迹的完整性和精细性较为困难,计算参数设置烦琐不适于大批量数据的自动处理.针对该方法存在的问题,本文对其进行了改进:(1)采用一种"削皮"算法选取震源轨迹所经过的模型单元的节点作为轨迹代表点;(2)将残差较小的区域作为震源轨迹计算区域(该区域依轨迹分布自适应地划分为若干个连通区域),从未计算的轨迹代表点中选取残差最小者作为射线路径初始点,利用最小走时树算法依次计算所有连通区域内的震源轨迹;(3)通过去掉较短的不再分叉的射线路径使震源轨迹更为精细.虚拟和真实事件的算例表明,改进方法有效克服了原方法的不足,可便捷地计算复杂速度模型中事件的震源轨迹,计算的轨迹精细且较完整. 相似文献
17.
Daniel Abrams 《Ground water》2013,51(3):474-478
In low to medium resolution MODFLOW models, the area occupied by sink cells often far exceeds the surface area of the streams they represent. As a result, MODPATH will calculate inaccurate particle traces and transit times. A frequency distribution of transit times for a watershed will also be in error. Such a distribution is used to assess the long‐term impact of nonpoint source pollution on surface waters and wells. Although the inaccuracies for individual particles can only be avoided by increased model grid resolution or other advanced modeling techniques, the frequency distribution can be improved by scaling the particle transit times by an adjustment factor during post‐processing. 相似文献
18.
19.
The U.S. Department of Energy is currently studying Yucca Mountain, Nevada, as a potential site for a geological high-level waste repository. In the current conceptual models of radionuclide transport at Yucca Mountain, part of the transport path to pumping locations would be through an alluvial aquifer. Interactions with minerals in the alluvium are expected to retard the downstream migration of radionuclides, thereby delaying arrival times and reducing ground water concentrations. We evaluate the effectiveness of the alluvial aquifer as a transport barrier using the stochastic Lagrangian framework. A transport model is developed to account for physical and chemical heterogeneities and rate-limited mass transfer between mobile and immobile zones. The latter process is caused by small-scale heterogeneity and is thought to control the macroscopic-scale retardation in some field experiments. A geostatistical model for the spatially varying sorption parameters is developed from a site-specific database created from hydrochemical measurements and a calibrated modeling approach (Turner and Pabalan 1999). Transport of neptunium is considered as an example. The results are sensitive to the rate of transfer between mobile and immobile zones, and to spatial variability in the hydraulic conductivity. Chemical heterogeneity has only a small effect, as does correlation between hydraulic conductivity and the neptunium distribution coefficient. These results illustrate how general sensitivities can be explored with modest effort within the Lagrangian framework. Such studies complement and guide the application of more detailed numerical simulations. 相似文献
20.
The results of a vertical dipole tracer experiment performed in highly fractured rocks of the Clare Valley, South Australia, are presented. The injection and withdrawal piezometers were both screened over 3 m and were separated by 6 m (midpoint to midpoint). Due to the long screen length, several fracture sets were intersected, some of which do not connect the two piezometers. Dissolved helium and bromide were injected into the dipole flow field for 75 minutes, followed by an additional 510 minutes of flushing. The breakthrough of helium was retarded relative to bromide, as was expected due to the greater aqueous diffusion coefficient of helium. Also, only -25% of the total mass injected of both tracers was recovered. Modeling of the tracer transport was accomplished using an analytical one-dimensional flow and transport model for flow through a fracture with diffusion into the matrix. The assumptions made include: streamlines connecting the injection and withdrawal point can be modeled as a dipole of equal strength, flow along each streamline is one dimensional, and there is a constant Peclet number for each streamline. In contrast to many other field tracer studies performed in fractured rock, the actual travel length between piezometers was not known. Modeling was accomplished by fitting the characteristics of the tracer breakthrough curves (BTCs), such as arrival times of the peak concentration and the center of mass. The important steps were to determine the fracture aperture (240 microm) based on the parameters that influence the rate of matrix diffusion (this controls the arrival time of the peak concentration); estimating the travel distance (11 m) by fitting the time of arrival of the centers of mass of the tracers; and estimating fracture dispersivity (0.5 m) by fitting the times that the inflection points occurred on the front and back limbs of the BTCs. This method works even though there was dilution in the withdrawal well, the amount of which can be estimated by determining the value that the modeled concentrations need to be reduced to fit the data (approximately 50%). The use of two tracers with different diffusion coefficients was not necessary, but it provides important checks in the modeling process because the apparent retardation between the two tracers is evidence of matrix diffusion and the BTCs of both tracers need to be accurately modeled by the best fit parameters. 相似文献