共查询到20条相似文献，搜索用时 46 毫秒
1.
Coarse-grained whiteschist, containing the assemblage: garnet+kyanite+phengite+talc+quartz/coesite, is an abundant constituent of the ultrahigh-pressure metamorphic (UHPM) belt in the Kulet region of the Kokchetav massif of Kazakhstan. Garnet displays prograde compositional zonation, with decreasing spessartine and increasing pyrope components, from core to rim. Cores were recrystallized at T=380°C (inner) to 580°C (outer) at P<10 kbar (garnet–ilmenite geothermometry, margarite+quartz stability), and mantles at T=720–760°C and PH20=34–36 kbar (coesite+graphite stability, phengite geobarometer, KFMASH system reaction equilibria). Textural evidence indicates that rims grew during decompression and cooling, within the Qtz-stability field. Silica inclusions (quartz and/or coesite) of various textural types within garnets display a systematic zonal distribution. Cores contain abundant inclusions of euhedral quartz (type 1 inclusions). Inner mantle regions contain inclusions of polycrystalline quartz pseudomorphs after coesite (type 2), with minute dusty micro-inclusions of chlorite, and more rarely, talc and kyanite in their cores; intense radial and concentric fractures are well developed in the garnet. Intermediate mantle regions contain bimineralic inclusions with coesite cores and palisade quartz rims (type 3), which are also surrounded by radial fractures. Subhedral inclusions of pure coesite without quartz overgrowths or radial fractures (type 4) occur in the outer part of the mantle. Garnet rims are silica-inclusion-free. Type 1 inclusions in garnet cores represent the low-P, low-T precursor stage to UHPM recrystallization, and attest to the persistence of low-P assemblages in the coesite-stability field. Coesites in inclusion types 2, 3, and 4 are interpreted to have sequentially crystallized by net transfer reaction (kyanite+talc=garnet+coesite+H2O), and were sequestered within the garnet with progressively decreasing amounts of intragranular aqueous fluid. During the retrograde evolution of the rock, all three inclusion types diverged from the host garnet P–T path at the coesite–quartz equilibrium, and followed a trajectory parallel to the equilibrium boundary resulting in inclusion overpressure. Coesite in type 2 inclusions suffered rapid intragranular H2O-catalysed transformation to quartz, and ruptured the host garnet at about 600°C (when inclusion P27 kbar, garnet host P9 kbar). Instantaneous decompression to the host garnet P–T path, passed through the kyanite+talc=chlorite+quartz reaction equilibrium, resulting in the dusty micro-assemblage in inclusion cores. Type 3 inclusions suffered a lower volumetric proportion transformation to quartz at the coesite–quartz equilibrium, and finally underwent rupture and decompression when T<400°C, facilitating coesite preservation. Type 4 coesite inclusions are interpreted to have suffered minimal transformation to quartz and proceeded to surface temperature conditions along or near the coesite–quartz equilibrium boundary. 相似文献
2.
Experimental research on K-rich phases and observations from diamond inclusions, UHP metamorphic rocks, and xenoliths provide insights about the hosts for potassium at mantle conditions. K-rich clinopyroxene (Kcpx–KM 3+Si 2O 6) can be an important component in clinopyroxenes at P>4 GPa, dependent upon coexisting K-bearing phases (solid or liquid) but not, apparently, upon temperature. Maximum Kcpx content can reach 25 mol%, with 17 mol% the highest reported in nature. Partitioning (K)D(cpx/liquid) above 7 GPa=0.1–0.2 require ultrapotassic liquids to form highly potassic cpx or critical solid reactions, e.g., between Kspar and Di. Phlogopite can be stable to about 8 GPa at 1250 °C where either amphibole or liquid forms. When fluorine is present, it generally increases in Phl upon increasing P (and probably T) to about 6 GPa, but reactions forming amphibole and/or KMgF 3 limit F content between 6 and 8 GPa. The perovskite KMgF 3 is stable up to 10 GPa and 1400 °C as subsolidus breakdown products of phlogopite upon increasing P. (M4)K-substituted potassic richterite (ideally K(KCa)Mg 5Si 8O 22(OH,F) 2) is produced in K-rich peridotites above 6 GPa and in Di+Phl from 6 to 13 GPa. K content of amphibole is positively correlated with P; Al and F content decrease with P. In the system 1Kspar+1H 2O K-cymrite (hydrous hexasanidine–KAlSi 3O 8· nH 2O–Kcym) is stable from 2.5 GPa at 400 to 1200 °C and 9 GPa; Kcym can be a supersolidus phase. Formation of Kcym is sensitive to water content, not forming within experiments with H 2O 2O>Kspar. Phase X, a potassium di-magnesium acid disilicate ((K1−x−n)2(Mg1−nMn3+)2Si2O7H2x), forms in mafic compositions at T=1150–1400 °C and P=9–17 GPa and is a potential host for K and H2O at mantle conditions with a low-T geotherm or in subducting slabs. The composition of phase-X is not fixed but actually represents a solid solution in the stoichiometries □2Mg2Si2O7H2–(K□)Mg2Si2O7H–K2Mg2Si2O7 (□=vacancy), apparently stable only near the central composition. K-hollandite, KAlSi3O8, is possibly the most important K-rich phase at very high pressure, as it appears to be stable to conditions near the core–mantle boundary, 95 GPa and 2300 °C. Other K-rich phases are considered. 相似文献
3.
Petrologic data on the paragenesis of (I) kyanite-zoisite marbles and (II) garnet-chloritoid quartz-mica schists are presented with the goal of providing constraints on the pressure-temperature evolution of the Eclogite Zone, Tauern Window, Austria. The peak metamorphic assemblages in the two rock types are: (I) kyanite + zoisite + dolomite + quartz; zoisite + muscovite + dolomite + calcite + quartz; and (II) garnet + chloritoid + kyanite + muscovite + quartz + epidote ± dolomite ± Zn-staurolite. The estimated peak metamorphic conditions are 19 ± 2 kbar, 590 ± 20°C. Secondary alteration of the kyanite-zoisite marbles was accomplished in two stages. The early stage resulted in the production of margarite, paragonite, secondary muscovite and chlorite and the later stage resulted in the formation of sudoite (a di/trioctahedral Mg---Al layer silicate) and kaolinite. The early alteration is bracketed at conditions between 3 and 10 kbar, 450–550°C and the later alteration between 200 and 350°C, P 3 kbar. The P-T path is characterized by maximum burial to approximately 19 kbar (60–70 km) (at≈590°C), followed by nearly isothermal decompression to approximately 10 kbar (30 km), and then more gradual decompression with cooling to approximately 3 kbar (10 km). Alteration was apparently accomplished by the influx of H2O-rich fluids, with the composition of the fluid locally buffered by the mineral assemblage. 相似文献
4.
In this paper the first fluid-inclusion data are presented from Late Archaean Scourian granulites of the Lewisian complex of mainland northwest Scotland. Pure CO 2 or CO 2-dominated fluid inclusions are moderately abundant in pristine granulites. These inclusions show homogenization temperatures ranging from − 54 to + 10 °C with a very prominent histogram peak at − 16 to − 32 °C. Isochores corresponding to this main histogram peak agree with P-T estimates for granulite-facies recrystallization during the Badcallian (750–800 °C, 7–8 kbar) as well as with Inverian P-T conditions (550–600 °C, 5 kbar). The maximum densities encountered could correspond to fluids trapped during an early, higher P-T phase of the Badcallian metamorphism (900–1000 °C, 11–12 kbar). Homogenization temperatures substantially higher than the main histogram peak may represent Laxfordian reworking (≤ 500 °C, < 4 kbar). In the pristine granulites, aqueous fluid inclusions are of very subordinate importance and occur only along late secondary healed fractures. In rocks which have been retrograded to amphibolite facies from Inverian and/or Laxfordian shear zones, CO 2 inclusions are conspicuously absent; only secondary aqueous inclusions are present, presumably related to post-granulite hydration processes. These data illustrate the importance of CO 2-rich fluids for the petrogenesis of Late Archaean granulites, and demonstrate that early fluid inclusions may survive subsequent metamorphic processes as long as no new fluid is introduced into the system. 相似文献
5.
Three types of fluid inclusions have been identified in olivine porphyroclasts in the spinel harzburgite and lherzolite xenoliths from Tenerife: pure CO 2 (Type A); carbonate-rich CO 2–SO 2 mixtures (Type B); and polyphase inclusions dominated by silicate glass±fluid±sp±silicate±sulfide±carbonate (Type C). Type A inclusions commonly exhibit a “coating” (a few microns thick) consisting of an aggregate of a platy, hydrous Mg–Fe–Si phase, most likely talc, together with very small amounts of halite, dolomite and other phases. Larger crystals (e.g. (Na,K)Cl, dolomite, spinel, sulfide and phlogopite) may be found on either side of the “coating”, towards the wall of the host mineral or towards the inclusion center. These different fluids were formed through the immiscible separations and fluid–wall-rock reactions from a common, volatile-rich, siliceous, alkaline carbonatite melt infiltrating the upper mantle beneath the Tenerife. First, the original siliceous carbonatite melt is separated from a mixed CO 2–H 2O–NaCl fluid and a silicate/silicocarbonatite melt (preserved in Type A inclusions). The reaction of the carbonaceous silicate melt with the wall-rock minerals gave rise to large poikilitic orthopyroxene and clinopyroxene grains, and smaller neoblasts. During the metasomatic processes, the consumption of the silicate part of the melt produced carbonate-enriched Type B CO 2–SO 2 fluids which were trapped in exsolved orthopyroxene porphyroclasts. At the later stages, the interstitial silicate/silicocarbonatite fluids were trapped as Type C inclusions. At a temperature above 650 °C, the mixed CO 2–H 2O–NaCl fluid inside the Type A inclusions were separated into CO 2-rich fluid and H 2O–NaCl brine. At T<650 °C, the residual silicate melt reacted with the host olivine, forming a reaction rim or “coating” along the inclusion walls consisting of talc (or possibly serpentine) together with minute crystals of NaCl, KCl, carbonates and sulfides, leaving a residual CO 2 fluid. The homogenization temperatures of +2 to +25 °C obtained from the Type A CO 2 inclusions reflect the densities of the residual CO 2 after its reactions with the olivine host, and are unrelated to the initial fluid density or the external pressure at the time of trapping. The latter are restricted by the estimated crystallization temperatures of 1000–1200 °C, and the spinel lherzolite phase assemblage of the xenolith, which is 0.7–1.7 GPa. 相似文献
6.
A detailed fluid inclusion study has been carried out on the hydrocarbon-bearing fluids found in the peralkaline complex, Lovozero. Petrographic, microthermometric, laser Raman and bulk gas data are presented and discussed in context with previously published data from Lovozero and similar hydrocarbon-bearing alkaline complexes in order to further understand the processes which have generated these hydrocarbons. CH 4-dominated inclusions have been identified in all Lovozero samples. They occur predominantly as secondary inclusions trapped along cleavage planes and healed fractures together with rare H 2O-dominant inclusions. They are consistently observed in close association with either arfvedsonite crystals, partially replaced by aegirine, aegirine crystals or areas of zeolitization. The majority of inclusions consist of a low-density fluid with CH 4 homogenisation temperatures between −25 and −120 °C. Those in near-surface hand specimens contain CH 4+H 2 (up to 40 mol%)±higher hydrocarbons. However, inclusions in borehole samples contain CH 4+higher hydrocarbons±H 2 indicating that, at depth, higher hydrocarbons are more likely to form. Estimated entrapment temperatures and pressures for these inclusions are 350 °C and 0.2–0.7 kbar. A population of high-density, liquid, CH 4-dominant inclusions have also been recorded, mainly in the borehole samples, homogenising between −78 and −99 °C. These consist of pure CH 4, trapped between 1.2 and 2.1 kbar and may represent an early CH 4-bearing fluid overprinted by the low-density population. The microthermometric and laser Raman data are in agreement with bulk gas data, which have recorded significant concentrations of H 2 and higher hydrocarbons up to C 6H 12 in these samples. These data, combined with published isotopic data for the gases CH 4, C 2H 6, H 2, He and Ar indicate that these hydrocarbons have an abiogenic, crustal origin and were generated during postmagmatic, low temperature, alteration reactions of the mineral assemblage. This would suggest that these data favour a model for formation of hydrocarbons through Fischer–Tropsch type reactions involving an early CO 2-rich fluid and H 2 derived from alteration reactions. This is in contrast to the late-magmatic model suggested for the formation of hydrocarbons in the similar peralkaline intrusion, Ilímaussaq, at temperatures between 400 and 500 °C. 相似文献
7.
Within the metamorphic basement of the Coastal Cordillera of central Chile, the Western Series constitutes the high-pressure (HP)/low-temperature (LT) part (accretionary prism) of a fossil-paired metamorphic belt dominated by metagreywackes. In its eastern part, blocks derived from small lenses of garnet amphibolite with a blueschist facies overprint are locally intercalated and associated with serpentinite and garnet mica-schist. Continuously developed local equilibria were evaluated applying various independent geothermobarometric approaches. An overall anticlockwise PT path results. The prograde path evolved along a geothermal gradient of 15 °C/km, passing the high-pressure end of greenschist facies until a transient assemblage developed within albite-epidote amphibolite facies transitional to eclogite facies at peak metamorphic conditions (600–760 °C, 11–16.5 kbar; stage I). This peak assemblage was overprinted during an external fluid infiltration by an epidote blueschist facies assemblage at 350–500 °C, 10–14 kbar (stage II) indicating nearly isobaric cooling. The retrograde equilibration stage was dated with a Rb–Sr mineral isochron at 305.3±3.2 Ma, somewhat younger (296.6±4.7 Ma) in an adjacent garnet mica-schist. Localized retrograde equilibration continued during decompression down to 300 °C, 5 kbar. The retrograde evolution is identical in the garnet amphibolite and the garnet mica-schist. The counterclockwise PT path contrasts the usual clockwise PT paths derived from rocks of the Western Series. In addition, their ages related to stage II are the oldest recorded within the fossil wedge at the given latitude. Its “exotic” occurrence is interpreted by the path of the earliest and deepest subducted material that was heated in contact with a still hot mantle. Later accreted and dehydrated material caused hydration and cooling of the earliest accreted material and the neighbouring mantle. After this change also related to rheological conditions, effective exhumation of the early subducted material followed at the base of the hydrated mantle wedge within a cooler environment (geothermal gradient around 10–15 °C/km) than during its burial. The exotic blocks thus provide important time markers for the onset of subduction mass circulation in the Coastal Cordillera accretionary prism during the Late Carboniferous. Continuous subduction mass flow lasted for nearly 100 Ma until the Late Triassic. 相似文献
8.
A combined fluid inclusion and mineral thermobarometric study in groups of synchronous inclusions in quartz within weakly foliated granites from the Chottanagpur Gneissic Complex, India, reveals super dense carbonic (CO 2 with minor CH 4 and H 2O) inclusions and hypersaline (H 2O–NaCl ± NaHCO 3) inclusions, with halite- and nahcolite daughter phases. This study documents the highest density (1.115 g cm − 3) CO 2 fluids ever reported in granites. Fluid isochores, constructed from CO 2 (± CH 4) and halite-bearing inclusions, coupled with two-feldspar thermometry constrain the minimum P–T at 8 kbar/ 750 °C for fluid entrapment in granites. By contrast, the carbonic inclusions in quartz from granite-hosted metapelite enclaves contain substantial CH 4 (up to 30 mol%), and the entrapment pressure ( 4.3 kbar/600 °C) is considerably lower compared to those in the granites. By implication, the sillimanite-free granites were not derived from the metapelitic enclaves, and instead were formed by partial melting of fluid-heterogeneous lower crustal protoliths, with fluid entrapment at magmatic conditions. 相似文献
9.
Idiomorphic quartz crystals in topaz-bearing granite from the Salmi batholith contain primary inclusions of silicate melt and abundant mostly secondary aqueous fluid inclusions. Microthermometric measurements on melt inclusions give estimates for the granite solidus and liquidus of 640–680°C and 770–830°C, respectively. Using published solubility models for H 2O in granitic melts and the obtained solidus/liquidus temperatures from melt inclusions, the initial water concentration of the magma is deduced to have been approximately 3 wt.% and the minimum pressure about 2 kbar. At this initial stage, volatile-undersaturation conditions of magma were assumed. These results indicate that the idiomorphic quartz crystals are magmatic in origin and thus real phenocrysts. During subsolidus cooling and fracturing of the granite, several generations of aqueous fluid inclusions were trapped into the quartz phenocrysts. The H 2O inclusions have salinities and densities of 1–41 wt.% NaCl eq. and 0.53–1.18 g/cm 3, respectively. 相似文献
10.
The aim of this paper is to estimate syntectonic P- T conditions within albite- and garnet-bearing orthogneisses. These rocks are generally characterized by the assemblage quartz + albite + biotite + phengite + CaFe-garnet + epidote + titanite. Garnet contains up to 55 mole per cent of grossular. K-feldspar is a relict magmatic phase. P-T conditions are estimated using several independent methods. First, it is shown that exchange reactions based on the Fe---Mg partitioning between garnet and biotite or garnet and phengite cannot be used to estimate temperatures in these rocks, due to the high grossular content of garnet. Second, maximum and minimum pressures are constrained, respectively, by the occurrence of albite instead of jadeite + quartz and by the assemblage phengite + biotite + quartz. Third, phase equilibria in albite- and garnet-bearing metagranites are modelled in the system K2O---CaO---FeO---Al2O3---SiO2---H2O. Equilibrium curves are calculated for the observed phase compositions. Uncertainties in P-T estimates mainly result from the choice of appropriate non-ideal solution models for the garnet. An application is developed for granites from the Gran Paradiso nappe (Western Alps). These granites show an heterogeneous deformation of Alpine age expressed by mylonitic shear zones cutting across weakly deformed domains. Estimated P-T conditions for the synkinematic assemblages are 10–16 kbar at 550±50°C. 相似文献
11.
Minor granulites (believed to be pre-Triassic), surrounded by abundant amphibolite-facies orthogneiss, occur in the same region as the well-documented Triassic high- and ultrahigh-pressure (HP and UHP) eclogites in the Dabie–Sulu terranes, eastern China. Moreover, some eclogites and garnet clinopyroxenites have been metamorphosed at granulite- to amphibolite-facies conditions during exhumation. Granulitized HP eclogites/garnet clinopyroxenites at Huangweihe and Baizhangyan record estimated eclogite-facies metamorphic conditions of 775–805 °C and ≥15 kbar, followed by granulite- to amphibolite-facies overprint of ca. 750–800 °C and 6–11 kbar. The presence of (Na, Ca, Ba, Sr)-feldspars in garnet and omphacite corresponds to amphibolite-facies conditions. Metamorphic mineral assemblages and P– T estimates for felsic granulite at Huangtuling and mafic granulite at Huilanshan indicate peak conditions of 850 °C and 12 kbar for the granulite-facies metamorphism and 700 °C and 6 kbar for amphibolite-facies retrograde metamorphism. Cordierite–orthopyroxene and ferropargasite–plagioclase coronas and symplectites around garnet record a strong, rapid decompression, possibly contemporaneous with the uplift of neighbouring HP/UHP eclogites. Carbonic fluid (CO2-rich) inclusions are predominant in both HP granulites and granulitized HP/UHP eclogites/garnet clinopyroxenites. They have low densities, having been reset during decompression. Minor amounts of CH4 and/or N2 as well as carbonate are present. In the granulitized HP/UHP eclogites/garnet clinopyroxenites, early fluids are high-salinity brines with minor N2, whereas low-salinity fluids formed during retrogression. Syn-granulite-facies carbonic fluid inclusions occur either in quartz rods in clinopyroxene (granulitized HP garnet clinopyxeronite) or in quartz blebs in garnet and quartz matrices (UHP eclogite). For HP granulites, a limited number of primary CO2 and mixed H2O–CO2(liquid) inclusions have also been observed in undeformed quartz inclusions within garnet, orthopyroxene, and plagioclase which contain abundant, low-density CO2±carbonate inclusions. It is suggested that the primary fluid in the HP granulites was high-density CO2, mixed with a significant quantity of water. The water was consumed by retrograde metamorphic mineral reactions and may also have been responsible for metasomatic reactions (“giant myrmekites”) occurring at quartz–feldspar boundaries. Compared with the UHP eclogites in this region, the granulites were exhumed in the presence of massive, externally derived carbonic fluids and subsequently limited low-salinity aqueous fluids, probably derived from the surrounding gneisses. 相似文献
12.
The gas and redox chemistry of 100–300 °C geothermal fluids in Iceland has been studied as a function of fluid temperature and fluid composition. The partial pressures of CO 2 in dilute ( mCl<500 ppm) and saline ( mCl>500 ppm) geothermal fluids above 200 °C are controlled by the mineral buffer clinozoisite+prehnite+calcite+quartz. Two buffers are considered to control the H 2S and H 2 partial pressures above 200 °C depending on fluid salinity, epidote+prehnite+pyrite+pyrrhotite for dilute fluids and pyrite+prehnite+quartz+magnetite+anhydrite+clinozoisite+quartz for saline fluids. Below 200 °C, the partial pressures of CO 2, H 2S and H 2 also seem to be buffered but other minerals must be involved. Zeolites are expected to replace prehnite and epidote. Redox potential calculated on the assumption of equilibrium for the H +/H 2 redox couple decreases in dilute geothermal fluids with increasing temperature from about −0.5 V at 100 °C to −0.8 V at 300 °C, whereas saline geothermal fluids at 250 °C display a redox potential of about −0.45 V. A systematic discrepancy between redox couples of about 0.05–0.09 V is observed in the redox potential for the dilute geothermal fluids, whereas redox potentials agree within 0.02–0.04 V for saline geothermal waters. The discrepancies in the calculated redox potential for dilute geothermal fluids are thought to be due to a general lack of equilibrium between CH 4, CO 2 and H 2 and between H 2S, SO 4 and H 2. It is, accordingly, concluded that an overall equilibrium among redox species has not been reached for dilute geothermal fluids whereas it appears to be more closely approached for the saline geothermal fluids. The latter conclusion is based on limited database and should be treated with care. Since the various redox components are not in an overall equilibrium in geothermal fluids in Iceland these fluids cannot be characterised by a unique hydrogen fugacity, oxygen fugacity or redox potential at a given temperature and pressure. 相似文献
13.
Recovery of highly viscous oil from some of the deeper oil sand deposits of northern Alberta, Canada, is made possible through injection of heat by steam or hot water flooding of the reservoirs. The rise in temperature lowers the viscosity of the bitumen allowing it to be produced. The increase in temperature accelerates the reactions between the matrix and pore minerals of the formation and can produce reaction products which can significantly alter the permeability of the reservoir. If carbonate minerals are present in the reservoir, inorganic CO 2 may also be a reaction product. The Grand Rapids reservoir consists of relatively clean quartz sand containing 7 wt.% kaolinite, 1 wt.% calcite and a trace of smectite. Core floods of this sand by a neutral NaCl brine at 265°C, 8.2-MPa overburden pressure, 6.0-MPa fluid pressure and a flow velocity of 0.4 pore volumes per hour were used to determine the potential for hydrothermal reactions between clays and carbonate minerals in a natural reservoir sand. Reaction progress was followed by continuous sampling of the production fluids. The produced water was analyzed and the phase chemistry was calculated back to the run conditions using the computer code SOLMNEQF. Mass-balance considerations on produced total inorganic carbon (TIC) show that calcite broke down very quickly, the maximum in CO2 production occurring after only one pore volume of fluid had passed through the core. The Ca released from the breakdown of calcite was incorporated in the formation of smectite as was shown by post-run clay mineral analysis by the following unbalanced chemical reaction: calcite+kaolinite+H4Si04Ca-smectite+H20+CO2 Silica was supplied by the dissolution of quartz. Silica concentrations analyzed in the production fluid were depressed from those predicted by previously published quartz rate equations because of the rapid rate of smectite synthesis. These observations were used to formulate the following model for the passage of the first pore volume of NaCl brine through the core. Initially calcite is present throughout the core. As the brine enters the inlet of the core, it equilibrates with calcite. The brine remains in equilibrium with calcite throughout the core as quartz and kaolinite react to form smectite. This model was tested with the computer code PATH.UBC using CO2 production as a measure of the progress variable ξ. A best fit was achieved to the produced fluid chemistry by varying relative dissolution rates of kaolinite and quatz and varying the suppression of precipitation of certain minerals. 相似文献
14.
The Trinity ophiolite consists of small magma chambers inside a large mantle body. Xenoliths of mantle peridotite occur both in gabbroic cumulates along the walls and in the matrices of ultrabasic breccias on the floors of the magma chambers. Field relationships and petrographic data suggest that these fragments of original mantle peridotite were modified by contact with basic magmas by modal metasomatism. Quantitative elemental mass transfers determined from the composition, volume and density variations of reacting minerals demonstrate both closed and open system conditions for the major (Si, Al, Ti, Na, Ca, Fe and Mg) and trace elements (Cr, Ni). In the open system, material gains and losses provide information on the composition of the fluid taking part in the metasomatic reaction. During a first stage of metasomatism the mantle xenoliths were affected by high-temperature reactions at 600 to 925°C. They resulted from the interaction between solid mantle lherzolites and basic melts. The reactions are: 1. (1)those forming orthopyroxene-magnetite simplectite 2. (2)those forming plagioclase-magnetite corona 3. (3)clinopyroxene+spinel I→pargasitic hornblende+spinel II.
Chemical interactions between the upper mantle and oceanic magma chambers occurred as soon as the basic magmas had ascended through the upper mantle. The chemically modified magmas, within oceanic magma chambers, were depleted in Ti, Fe and Na. This could partly explain regional variations of the chemical compositions of primary magmas produced beneath slow-spreading ridges. The breakdown of olivine to orthopyroxene and magnetite participates in the control of the partition of magnetic Fe---Ti oxides between oceanic crust and mantle. During the second stage, the serpentinization of olivine and the production of talc were superimposed on the products of the first stage. These reactions require large amounts of H2O. The hydrothermal fluid was probably seawater. It circulated in the brecciated area along the walls and floors of the magma chambers located at shallow depths. Such structural discontinuities thus played the role of penetration channels favoring seawater circulation in the oceanic crust. All the chemical reactions examined suggest a significant open-system element transfer by infiltrating melts or circulating fluids. The results of this study suggest that caution is required in the interpretation of mineralogical and chemical information provided by mantle xenoliths carried to the surface by ascending magmas. 相似文献
15.
Abstract The Rockley Volcanics from near Oberon, New South Wales occur within the aureole of the Carboniferous Bathurst Batholith and have been contact metamorphosed at P ∼ 100 ± 50MPa (10.5kbar) and a maximum T ∼ 565°C in the presence of a C–O–H fluid. Prior to contact metamorphism the volcanics were regionally metamorphosed and altered with the extensive development of actinolite, chlorite, plagioclase, quartz and calcite. The contact metamorphosed equivalents of these rocks have been subdivided into: Ca-poor (cordierite + gedrite), Mg-rich (amphibole + olivine + spinel), mafic (amphibole + plagioclase) and Ca-rich (amphibole + garnet + diopside; diopside + plagioclase; garnet + diopside + wollastonite) rocks. The chemistry of the minerals in the hornfelses was controlled by the bulk rock chemistry and fluid composition. Pargasites and hastingsites as well as an unusual phlogopite with blue green pleochroism, are found in Ca-rich hornfelses. A comparison of the assemblages with experimentally derived equilibria suggests that the fluid phase associated with the Ca-rich hornfelses was water-rich (X co2= 0.1 to 0.3) while that associated with the Mg-rich hornfelses was enriched in CO 2 (X co2 > 0.7). The different hornfels types have reacted to contact metamorphism independently in both their solid and fluid chemistries. 相似文献
16.
The stability fields of analcime and analcime+quartz have been investigated using conventional hydrothermal techniques, over the approximate range of conditions 160–600 °C and 500–5000 bars fluid pressure. The dehydration of analcime (Na 2Al 2Si 3·3O 11·6 · nH 2O) to albite, nepheline and H 2O occurs at temperatures of 492±5 °C at 500 bars, 538±5 °C at 1000 bars, 578±5 °C at 2000 bars and 598±5 °C at 3000 bars. In the presence of quartz, analcine dehydrates to highly disordered albite and H 2O at about 200 °C and 2000 bars, 196°±5 °C and 3000 bars, about 190 °C and 4000 bars, and 183±5 °C at 5000 bars Pfluid. The synthetic phase equilibria appear to be compatible with field observations that primary analcimes occur as phenocrysts or in groundmass in some volcanic and hypabyssal rocks and secondary analcimes in sedimentary, hydrothermally altered and low-grade metamorphic rocks. 相似文献
17.
The stability and phase relations of phengitic muscovite in a metapelitic bulk composition containing a mixed H 2O+CO 2 fluid were investigated at 6.5–11 GPa, 750–1050°C in synthesis experiments performed in a multianvil apparatus. Starting material consisted of a natural calcareous metapelite from the coesite zone of the Dabie Mountains, China, ultrahigh-pressure metamorphic complex that had experienced peak metamorphic pressures greater than 3 GPa. The sample contains a total of 2.1 wt.% H 2O and 6.3 wt.% CO 2 bound in hydrous and carbonate minerals. No additional fluid was added to the starting material. Phengite is stable in this bulk composition from 6.5 to 9 GPa at 900°C and coexists with an eclogitic phase assemblage consisting of garnet, omphacite, coesite, rutile, and fluid. Phengite dehydrates to produce K-hollandite between 8 and 11 GPa, 750–900°C. Phengite melting/dissolution occurs between 900°C and 975°C at 6.5–8 GPa and is associated with the appearance of kyanite in the phase assemblage. The formation of K-hollandite is accompanied by the appearance of magnesite and topaz-OH in the phase assemblage as well as by significant increases in the grossular content of garnet (average Xgrs=0.52, Xpy=0.19) and the jadeite content of omphacite ( Xjd=0.92). Mass balance indicates that the volatile content of the fluid phase changes markedly at the phengite/K-hollandite phase boundary. At P≤8 GPa, fluid coexisting with phengite appears to be relatively CO 2-rich (XCO 2/XH 2O=2.2), whereas fluid coexisting with K-hollandite and magnesite at 11 GPa is rich in H 2O (XCO 2/XH 2O=0.2). Analysis of quench material and mass balance calculations indicate that fluids at all pressures and temperatures examined contain an abundance of dissolved solutes (approximately 40 mol% at 8 GPa, 60 mol% at 11 GPa) that act to dilute the volatile content of the fluid phase. The average phengite content of muscovite is positively correlated with pressure and ranges from 3.62 Si per formula unit (pfu) at 6.5 GPa to 3.80 Si pfu at 9 GPa. The extent of the phengite substitution in muscovite in this bulk composition appears to be limited to a maximum of 3.80–3.85 Si pfu at P=9 GPa. These experiments show that phengite should be stable in metasediments in mature subduction zones to depths of up to 300 km even under conditions in which aH 2O1. Other high-pressure hydrous phases such as lawsonite, MgMgAl-pumpellyite, and topaz-OH that may form in subducted sediments do not occur within the phengite stability field in this system, and may require more H 2O-rich fluid compositions in order to form. The wide range of conditions under which phengite occurs and its participation in mixed volatile reactions that may buffer the composition of the fluid phase suggest that phengite may significantly influence the nature of metasomatic fluids released from deeply subducted sediments at depths of up to 300 km at convergent plate boundaries. 相似文献
18.
The aim of this experimental study was to determine the solubility of cassiterite in natural topaz- and cassiterite-bearing granite melts at temperatures close to the solidus. Profiles of Sn concentrations at glass–crystal (SnO 2) interface were determined following the method of (Harrison, T.M., Watson, E.B., 1983. Kinetics of zircon dissolution and zirconium diffusion in granitic melts of variable water content. Contributions to Mineralogy and Petrology 84, 66–72). The cassiterite concentration calculated at the SnO 2–glass interface is the SnO 2 solubility. Experiments were performed at 700–850 °C and 2 kbar using a natural F-bearing peraluminous granitic melt with 2.8 wt.% normative corundum. Slightly H 2O-undersaturated to H 2O-saturated melt compositions were chosen in order to minimize the loss of Sn to the noble element capsule walls. At the nickel–nickel oxide assemblage (Ni–NiO) oxygen fugacity buffer, the solubility of cassiterite in melts containing 1.12 wt.% F increases from 0.32 to 1.20 wt.% SnO 2 with an increasing temperature from 700 to 850 °C. At the Ni–NiO buffer and a given corundum content, SnO 2 solubility increases by 10% to 20% relative to an increase of F from 0 to 1.12 wt.%. SnO 2 solubility increases by 20% relative to increasing Cl content from 0 to 0.37 wt.% in synthetic granitic melts at 850 °C. We show that Cl is at least as important as F in controlling SnO 2 solubility in evolved peraluminous melts at oxygen fugacities close to the Ni–NiO buffer. In addition to the strong effects of temperature and fO 2 on SnO 2 solubility, an additional controlling parameter is the amount of excess Al (corundum content). At Ni–NiO and 850 °C, SnO 2 solubility increases from 0.47 to 1.10 wt.% SnO 2 as the normative corundum content increases from 0.1 to 2.8 wt.%. At oxidizing conditions (Ni–NiO +2 to +3), Sn is mainly incorporated as Sn 4+ and the effect of excess Al seems to be significantly weaker than at reducing conditions. 相似文献
19.
As is typical of ultra-high pressure (UHP) terrains, the regional extent of the UHP terrain in the Dabieshan of central China is highly speculative, since the volume of eclogites and paragneisses preserving unequivocal evidence of coesite and/or diamond stability is very small. By contrast, the common garnet ( XMn=0.18–0.45)–phengite (Si=3.2–3.35)–zoned epidote (Ps 38–97)–biotite–titanite–two feldspars–quartz assemblages in the more extensive orthogneisses have been previously thought to have formed under low P– T conditions of ca. 400±50°C at 4 kbar. However, certain orthogneiss samples preserve garnets with XCa up to 0.50, rutile inclusions within titanite or epidote and relict phengite inclusions within epidote with Si contents p.f.u. of up to 3.49 — overlapping with the highest values (3.49–3.62) recorded for phengites in samples of undoubted UHP schists. These and other mineral composition features (such as A-site deficiencies in the highest Si phengites, Na in garnets linked to Y+Yb substitution and Al F Ti −1 O −1 substitution in titanites) are taken to be pointers towards the orthogneisses having experienced a similar metamorphic evolution to the associated UHP schists and eclogites. Re-evaluated garnet–phengite and garnet–biotite Fe/Mg exchange thermometry and calculated 5 rutile+3 grossular+2SiO 2+H 2O=5 titanite+2 zoisite equilibria indicate that the orthogneisses may indeed have followed a common subduction-related clockwise P– T path with the UHP paragneisses and eclogites through conditions of Pmax at ca. 690°C–715°C and 36 kbar to Tmax at ca. 710°C–755°C and 18 kbar, prior to extensive re-crystallisation and re-equilibration of these ductile orthogneisses at ca. 400°C–450°C and 6 kbar. The consequential conclusion, that it is no longer necessary to resort to models of tectonic juxtapositioning to explain the spatial association of these Dabieshan orthogneisses with undoubted UHP lithologies, has far-reaching implications for the interpretation of controversial gneiss–eclogite relationships in other UHP metamorphic terrains. 相似文献
20.
In order to identify and characterise fluids associated with metamorphic rocks from the Chaves region (North Portugal), fluid inclusions were studied in quartz veinlets, concordant with the main foliation, in graphitic-rich and nongraphitic-rich lithologies from areas with distinct metamorphic grade. The study indicates multiple fluid circulation events with a variety of compositions, broadly within the C–H–O–N–salt system. Primary fluid inclusions in quartz contain low salinity aqueous–carbonic, H 2O–CH 4–N 2–NaCl fluids that were trapped near the peak of regional metamorphism, which occurred during or immediately after D2. The calculated P– T conditions for the western area of Chaves (CW) is P=300–350 MPa and T500 °C, and for the eastern area (CE), P=200–250 MPa and T=400–450 °C. A first generation of secondary fluid inclusions is restricted to discrete cracks at the grain boundaries of quartz and consists of low salinity aqueous–carbonic, H 2O–CO 2–CH 4–N 2–NaCl fluids. P– T conditions from the fluid inclusions indicate that they were trapped during a thermal event, probably related with the emplacement of the two-mica granites. A second generation of secondary inclusions occurs in intergranular fractures and is characterised by two types of aqueous inclusions. One type is a low salinity, H2O–NaCl fluid and the second consists of a high salinity, H2O–NaCl–CaCl2 fluid. These fluid inclusions are not related to the metamorphic process and have been trapped after D3 at relatively low P (hydrostatic)–T conditions (P<100 MPa and T<300 °C). Both the early H2O–CH4–N2–NaCl fluids in quartz from the graphitic-rich lithologies and the later H2O–CO2–CH4–N2–NaCl carbonic fluid in quartz from graphitic-rich and nongraphitic-rich lithologies seem to have a common origin and evolution. They have low salinity, probably resulting from connate waters that were diluted by the water released from mineral dehydration during metamorphism. Their main component is water, but the early H2O–CH4–N2–NaCl fluids are enriched in CH4 due to interaction with the C-rich host rocks. From the early H2O–CH4–N2–NaCl to the later aqueous–carbonic H2O–CO2–CH4–N2–NaCl fluids, there is an enrichment in CO2 that is more significant for the fluids associated with nongraphitic-rich lithologies. The aqueous–carbonic fluids, enriched in H2O and CH4, are primarily associated with graphitic-rich lithologies. However, the aqueous–carbonic CO2-rich fluids were found in both graphitic and nongraphitic-rich units from both the CW and CE studied areas, which are of medium and low metamorphic grade, respectively. 相似文献
|
