共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
详细讨论了远震体波SV分量接收函数的特点及其在反演地壳S波速度结构中的优势．与径向接收函数类似，SV分量接收函数可通过对远震体波的SV分量直接反褶积P分量获得．研究分析表明:与径向接收函数相比，SV分量接收函数的振幅随震中距的变化更加稳定，波形简单且突出了对结构最敏感的PS转换波信息．理论数值实验显示:在反演地壳S波速度结构时，SV分量接收函数比径向接收函数具有更好的收敛性．作为实例，利用SV分量接收函数反演方法反演了海拉尔台下的S波速度结构． 相似文献
3.
正自从Langston提出接收函数以来,随着地震观测台网越来越密集,利用地震台阵观测研究构造带下方速度结构取得了重要进展,很多学者利用接收函数研究地壳上地幔速度结构。虽然P波接收函数可以获得地壳上地幔结构,但由于莫霍面和壳内间断面多次反射震相的干扰,单纯考虑Ps转换震相难以精确地确定岩石圈边界。Farra和Vinnik利用类似提取P波接收函数的方法得到Sp转换震相的S波接收函数。相比P波接收函数,由于S波接收函数不受间断面多次反射震相的干扰,因而在岩石圈—软 相似文献
4.
《地球物理学进展》2017,(6)
P波接收函数通过分离间断面上产生的P-to-S转换波来测量间断面的深度,由于地壳多次相的干扰,导致这一方法用于测岩石圈—软流圈界面(LAB)受到了很大的限制.不过,S波接收函数可以克服这一问题,因为它分离S-to-P转换相,而这一转换相比入射S波提前到达台站,于是避开了迟到的地壳S波振荡相.然而,由于S波的频率比P波低,这将导致S波接收函数的分辨率较P波接收函数的低.为了作对比分析,本文利用云南地区13个固定台站记录的远震三分量资料,分离出台站下方的P、S波接收函数,而且这些接收函数被校正到67°的参考震中距处,以便进行叠加增强信噪比.最后将时间域的叠加信号转换到深度域,分别获取台站下方的地壳和岩石圈的厚度.结果表明:P波接收函数得到的地壳厚度在32~56 km之间,S波接收函数得到的地壳厚度在41~54 km之间,S波接收函数得到地壳厚度系统地偏大8~9 km;P波接收函数得到的LAB深度在65~110 km之间,S波接收函数得到的LAB深度在66~135 km之间,S波接收函数得到的LAB深度偏大15~20 km,最大偏差达到了25 km. 相似文献
5.
接收函数方法被广泛地应用于地壳上地幔结构的研究中,H-κ叠加方法是其中最常用的方法之一.对于布设在基岩区台站计算的接收函数,H-κ叠加方法可以准确地估计台站下方地壳厚度和平均波速比,但是对于沉积盆地地区计算的接收函数,由于低速沉积层内会产生多次波混响,干扰甚至覆盖接收函数中莫霍面的转换波和多次波震相,从而影响H-κ叠加结果的准确性.为准确估计沉积盆地地区地壳结构,本文提出使用预测反褶积方法去除接收函数中低速沉积层内多次波混响,其中预测步长由接收函数归一化自相关函数获得,物理意义为沉积层内S波双程走时.合成接收函数和实测接收函数试验表明,本文提出的预测反褶积方法可以有效地去除沉积层多次波混响,并结合改进的H-κ叠加方法可以准确地估计沉积层下覆地壳厚度和平均波速比.相比于其他去除接收函数多次波混响的方法,本文提出的预测反褶积方法具有参数设定简单、运算量小、震相幅值较大等特点,适用于大批量数据处理. 相似文献
6.
从远震体波波形数据中提取的P波接收函数和S波接收函数已经成为研究台站下方地壳上地幔速度间断面的最有效的方法之一.P波接收函数已经被广泛应用于获取地壳内部S波速度结构、地壳厚度及物质成分组成、地幔过渡带的厚度变化以及岩石圈地幔的间断面等,而S波接收函数是P波接收函数的一个很好的补充,因为在Moho和地幔过渡带之间的深度范围内,Sp转换波比来自浅部间断面的多次波到达早,而在P波接收函数中,相同深度范围的间断面的Ps转换波往往被来自浅部间断面的多次波干扰或者淹没,因此S波接收函数是目前获取岩石圈地幔深度范围内速度间断面结构(如Moho和LAB)的比较有效的方法,比面波观测具有更高的分辨率.本文详细阐述了P波接收函数和S波接收函数的方法原理以及在地壳上地幔速度间断面的研究中所采用的研究思路. 相似文献
7.
S波接收函数对于研究岩石圈速度结构具有重要价值. 本文利用合成地震图技术研究了S波接收函数的动力学特征. 在接收函数非线性复谱比反演方法的基础上,发展了基于贝叶斯理论的P波和S波接收函数的非线性联合反演方法. 结果表明:(1)适用于S波接收函数反演的震中距范围约为55°~80°,S波接收函数反演要求所用远震事件的震级大于5级; (2)与陡变的岩石圈底部界面(LAB)相比,梯度带类型LAB上生成的SLP转换波相对较弱,台站下方的沉积盖层有助于相对增强SLP震相; (3)由于S波接收函数径向分量不符合δ脉冲,不依赖于等效震源假定的三分量接收函数多道最大或然性反褶积方法更适合S波接收函数的估计;(4)数值检验的结果表明,在初始模型速度参数偏离真实模型20%的情况下,本文的方法能够预测300 km深度范围内的P波和S波速度结构;(5)观测数据的反演结果表明,由于P波接收函数低频分量相对不足,本文的联合反演方法对于大于100 km深度上地幔的S波速度结构约束相对较弱. 相似文献
8.
远震接收函数方法及其在海域岛礁区地壳结构研究中的应用 总被引：1，自引：0，他引：1
远震接收函数方法从远震P波波形中提取出台站下方主要速度间断面的信息,是研究地壳、上地幔结构的有效方法。该方法通过拟合转换波波形来约束间断面深度和横波速度。传统的接收函数线性反演方法强烈依赖于初始模型的选取,其反演结果存在较大的不确定性,为此新的基于非线性的反演方法逐渐发展起来,另外,接收函数与面波联合反演以及S波接收函数方法的提出也在一定程度上降低了反演结果的非唯一性。接收函数方法在大陆区地壳结构的研究中得到了广泛运用,但对于海区和岛礁区的研究却非常缺乏,本文回顾了国内外一些岛礁区的接收函数研究实例,介绍了西沙群岛琛航岛的天然地震观测及其结果,探讨了接收函数方法在岛礁区地壳结构研究中的应用前景。 相似文献
9.
《地球物理学进展》2015,(6)
回顾了接收函数叠加成像方法的发展过程,发现现在仍被广泛用于接收函数成像的共转换点(CCP)叠加成像方法存在着一定的缺点.通过计算转换波射线路径,得到不同深度、不同震中距转换波射线参数,发现共转换点叠加方法适合于P波接收函数叠加成像,对S波接收函数叠加成像却可能产生错误.结果显示在震中距为60°左右时,真正的转换点位置与共转换点叠加方法追踪到的转换点位置在深度为140km处水平方向偏离约200km,在震中距70°-80°之间时,真正的转换点位置与传统共转换点叠加方法追踪到的转换点位置之间的偏差小于S波接收函数的水平分辨率.利用不同深度产生的转换波射线参数进行反投影,能将转换点归位到更接近于真实的转换点位置上,从而使得通过S波接收函数获取的地球内部结构更加可靠.在岩石圈厚度变化剧烈的地区,建议优先采用震中距在70°-80°之间的远震S波事件进行岩石圈结构的研究. 相似文献
10.
11.
12.
M. N. French R. L. Bras W. F. Krajewski 《Stochastic Environmental Research and Risk Assessment (SERRA)》1992,6(1):27-45
A procedure for short-term rainfall forecasting in real-time is developed and a study of the role of sampling on forecast ability is conducted. Ground level rainfall fields are forecasted using a stochastic space-time rainfall model in state-space form. Updating of the rainfall field in real-time is accomplished using a distributed parameter Kalman filter to optimally combine measurement information and forecast model estimates. The influence of sampling density on forecast accuracy is evaluated using a series of a simulated rainfall events generated with the same stochastic rainfall model. Sampling was conducted at five different network spatial densities. The results quantify the influence of sampling network density on real-time rainfall field forecasting. Statistical analyses of the rainfall field residuals illustrate improvement in one hour lead time forecasts at higher measurement densities. 相似文献
14.
《地震工程与工程振动(英文版)》2014,(4)
正This journal is established by the Institute of Engineering Mechanics(IEM),China Earthquake Administration,to promote scientific exchange between Chinese and foreign scientists and engineers so as to improve the theory and practice of earthquake hazards mitigation,preparedness,and recovery.To accomplish this purpose,the journal aims to attract a balanced number of papers between Chinese and 相似文献
15.
O. Martins 《水文研究》1988,2(1):19-29
Water quality analyses for the Niger River for the 1980/81 hydrological year are presented. The samples were collected from the main river at Lokoja, and from two main tributaries, the Kaduna and the Benue Rivers. Different water types were distinguished by the concentrations of major ions. The type Ca > Na > Mg > K - HCO3 > SO4 > Cl was represented at all stations during at least part of the year. Chloride was found to dominate the sulphate ion in the Kaduna and Niger, while the Benue maintained a higher concentration of sulphate relative to chloride all year round. Distinct patterns of seasonal variation in the ion concentrations were observed, particularly for the samples collected at Lokoja. Low ion concentrations were prominent during periods of high discharge, while low flow periods coincided with high dissolved ion concentrations. The contribution of rainwater to the total dissolved solids in the river waters was assessed indirectly using rainwater chemistry data from the Gulf of Guinea. The estimated rainwater contribution to the Lower Niger amounts to 5.15 mg 1?1. Geochemical weathering calculations involving reactions of the four major minerals of granitic rocks - anorthite, biotite, albite, and K-feldspar - with carbon dioxide and water, can account for the average water composition of the Lower Niger. The proportion of the ionic components was also related to the occurrence of the respective element in the minerals. 相似文献
16.
Historical earthquakes noted in the written records of the South China region, including Hong Kong, are not well delineated along identified prominent fault sources. Despite the lack of any definitive, localised trend in the spatial distribution of seismic activity in the region, there does appear to be some major disparity in the seismic activity rates (especially for large magnitude earthquakes) between the near-field and the far-field regions of Hong Kong. Despite this observation, previous studies of the regional seismic activity and seismic ground motion hazard (the latter using a probabilistic seismic hazard assessment, PSHA) have considered very broad source zone regions, in which uniform levels of seismic activity have been assumed. The present paper further scrutinises this broad source zone (BSZ) approach by adopting a novel expanding circular disc (ECD) method to determine the rates of earthquake recurrence. Such a method is intended to counter-check previously developed models by determining earthquake scenario events in terms of magnitude–distance (M–R) pairs or combinations, having defined values of average return period. Unlike the BSZ approach, the ECD method specifically accounts for the supposed variations in the seismic activity rates between events in the near-field and the far-field of Hong Kong.The form of the developed method is particularly suited to the determination of design-level earthquake ground motions for bedrock sites, since it assumes a directionally-independent attenuation model as described in the companion paper. It is found that, whilst the BSZ approach may indicate the overall average levels of hazard that are representative of the South China region as a whole, it does not capture the large disparity in seismic activity rates between near-field and far-field events. This important feature is expected to have a significant impact upon engineering assessments of the seismic safety of structures in Hong Kong and elsewhere in the South China region. For example, it is found that for events with M≥6, the seismic activity rate (normalised by time and area) in the very far-field is around 3.5 times larger than in the near-field and medium-field of Hong Kong. The resulting design M-R combinations, covering a range of return periods from 70 to 2500 years, are limited, for very long return periods and for distant events, by the maximum credible earthquake (MCE) magnitude. Intensive research to determine this seismic hazard parameter is recommended, in order to refine further the results of the ECD analysis, which presently conservatively assumes the MCE to range between M=6 in the near-field of Hong Kong to M=8 in the very far-field, at distances greater than 280 km from Hong Kong. 相似文献
17.
Depositional ages and characteristics of Middle–Upper Jurassic and Lower Cretaceous lacustrine deposits in southeastern Mongolia 
下载免费PDF全文
下载免费PDF全文 Hitoshi Hasegawa Hisao Ando Noriko Hasebe Niiden Ichinnorov Tohru Ohta Takashi Hasegawa Masanobu Yamamoto Gang Li Bat‐Orshikh Erdenetsogt Ulrich Heimhofer Takayuki Murata Hironori Shinya G. Enerel G. Oyunjargal O. Munkhtsetseg Noriyuki Suzuki Tomohisa Irino Koshi Yamamoto 《Island Arc》2018,27(3)
Lower Cretaceous lacustrine oil shales are widely distributed in southeastern Mongolia. Due to the high organic carbon content of oil shale, many geochemical studies and petroleum exploration have been conducted. Although most of the oil shales are considered to be Early Cretaceous in age, a recent study reveals that some were deposited in the Middle Jurassic. The present study aims at establishing depositional ages and characteristics of the Jurassic and Cretaceous lacustrine deposits in Mongolia. The Lower Cretaceous Shinekhudag Formation is about 250 m thick and composed of alternating beds of shale and dolomite. The Middle Jurassic Eedemt Formation is about 150 m thick and composed of alternating beds of shale, dolomitic marl, and siltstone. The alternations of shale and dolomite in both formations were formed by lake level changes, reflecting precipitation changes. Shales were deposited in the center of a deep lake during highstand, while dolomites were formed by primary precipitation during lowstand. Based on the radiometric age dating, the Shinekhudag Formation was deposited between 123.8 ±2.0 Ma and 118.5 ±0.9 Ma of the early Aptian. The Eedemt Formation was deposited at around 165–158 Ma of Callovian–Oxfordian. The calculated sedimentation rate of the Shinekhudag Formation is between 4.7 ±2.6 cm/ky and 10.0 ±7.6 cm/ky. Shales in the Shinekhudag Formation show micrometer‐scale lamination, consisting of algal organic matter and detrital clay mineral couplets. Given the average thickness of micro‐laminae and calculated sedimentation rate, the micro‐lamination is most likely of varve origin. Both Middle–Upper Jurassic and Lower Cretaceous lacustrine oil shales were deposited in intracontinental basins in the paleo‐Asian continent. Tectonic processes and basin evolution basically controlled the deposition of these oil shales. In addition, enhanced precipitation under humid climate during the early Aptian and the Callovian–Oxfordian was another key factor inducing the widespread oil shale deposition in Mongolia. 相似文献
18.
A. C. LIAKOPOULOS Dr. Eng. 《水文科学杂志》2013,58(1):69-110
ABSTRACT The one-dimensional transient downward entry of water in unsaturated soils is investigated theoretically. The mathematical equation describing the infiltration process is derived by combining Darcy's dynamic equation of motion with the continuity and thermodynamic state equations adjusted for the unsaturated flow conditions. The resulting equation together with the corresponding initial and boundary conditions constitues a mathematical initial boundary value problem requiring the solution of a nonlinear partial differential equation of the parabolic type. The volumetric water content is taken as the dependent variable and the time and the position along the vertical direction are taken as the independent variables. The governing equation is of such nature that a solution exists for t > 0 and is uniquely determined if two relationships are defined, together with the specified state of the system, at the initial time t = 0 and at the two boundaries. The two required relations are those of pressure versus permeability and pressure versus volumetric water content. Since the partial differential equation has strong non-linear terms, a discrete solution is obtained by approximating the derivatives with finite-differences at discrete mesh points in the solution domain and integrated for the corresponding initial and boundary conditions. The use of an implicit difference scheme is employed in order to generate a system of simultaneous non-linear equations that has to be solved for each time increment. For n mesh points the two boundary conditions provide two equations and the repetition of the recurrence formula provides n—2 equations, the total being n equations for each time increment. The solution of the system is obtained by matrix inversion and particularly with a back-substitution technique. The FORTRAN statements used for obtaining the solution with an electronic digital computer (IBM 704) are presented together with the input data. Analysis of the errors involved in the numerical solution is made and the stability and convergence of the solution of the approximate difference equation to that of the differential equation is investigated. The method applied is that of making a Fourier series expansion of a whole line of errors and then following the progress of the general term of the series expansion and also the behavior of each constituent harmonic. The errors (forming a continuous function of points in an abstract Banach space) are represented by vectors with the Fourier coefficients constituting a second Banach space. The amplification factor of the difference equation is shown to be always less than unity which guarantees the stability of the employed implicit recurrence scheme. Experiments conducted on a vertical column packed uniformly with very fine sand, show a satisfactory agreement between the theoretically and experimentally obtained values. Many experimental results are shown in an attempt to explain the infiltration phenomenon with emphasis on the shape and movement of the wet front, and the effects of the degree of compaction, initial water content and deaired water on the infiltration rate. 相似文献
19.
Church repair swarms and earthquakes in Rhodes Island, Greece 总被引：1，自引：0，他引：1
20.
GHODRAT TORABI 《Island Arc》2012,21(3):215-229
Late Permian trondhjemites in the Anarak area occur as stocks and dykes, which cross cut the Anarak ophiolite and its overlying metasedimentary rocks, and are exposed along the northern Anarak east–west main faults. These leucocratic intrusive bodies have enclaves of all ophiolitic units and metamorphic rocks. They are composed of amphibole, plagioclase (oligoclase), quartz, zircon and muscovite. Secondary minerals are chlorite (pycnochlorite), epidote, albite, magnetite and calcite. Whole‐rock major‐ and trace‐element analyses reveal that they are characterized by high SiO 2 (67.8–71.0 wt%), Al 2 O 3 (14.9–17.1 wt%) and Na 2 O (5.3–8.6 wt%), low K 2 O (0.1–1.5 wt%; average: 0.8 wt%), low Rb/Sr ratio (0.01–0.40; average: 0.09), low Y (3–6 ppm), negative Ti, Nb and Ta anomalies, slightly negative or positive Eu anomaly, LREE enrichment and fractionated HREE. These rocks present 2 to 40 times enrichment in inclined chondrite‐normalized REE patterns. Geochemical characteristics of the Anarak trondhjemites all reflect melting of a mafic protolith at more than 10 kbar. The field evidence and whole‐rock chemistry reveal that these rocks have been crystallized from magmas derived from melting of subducted Anarak oceanic crust. This study reveals that melting of garnet amphibolite was an important element of continent formation in the study area. 相似文献