共查询到20条相似文献，搜索用时 665 毫秒
1.
本文系统分析了岩盐单井水溶开采的特征, 应用弹性圆薄板理论对溶腔覆岩关键层进行分析, 推导出了溶腔覆岩层下沉变形微分方程和溶腔覆岩关键层上的载荷计算式, 并对溶腔覆岩关键层受力特征进行了分析, 推导了溶腔覆岩关键层初次破断距计算式, 建立了适用于岩盐单井水溶开采溶腔覆岩关键层判别的判据式, 是对以往关键层理论研究成果的补充, 为关键层理论应用于岩盐单井水溶开采溶腔覆岩移动规律研究打下了理论基础。最后, 对岩盐单井水溶开采覆岩控制研究内容和关键层理论在其中的应用思路进行了初步探讨。 相似文献
2.
通过对松宜矿区地面塌陷调查研究,按煤层顶板埋深和塌陷成因的不同将其分为浅埋型采空塌陷和深埋型岩溶塌陷,前者系指煤层顶板为栖霞组、茅口组地层区域,在缓坡地带、构造、岩溶发育部位、煤层厚度大的采空区易形成采空塌陷,无序复采、矿柱遭受破坏是主要诱发因素;后者是在矿坑高强度疏排地下水导致地下水位大幅降低,形成以真空吸蚀为主要成因的岩溶塌陷。针对其成因机制,提出了防治建议,对矿区地质环境综合治理具有实际意义。 相似文献
3.
4.
J. C. Stormont 《Geotechnical and Geological Engineering》1990,8(1):35-56
Summary Discontinuous behaviour is being observed and measured in the vicinity of excavations constructed in a bedded salt formation 650 m below ground surface for the Waste Isolation Pilot Plant (WIPP) Facility. The 2 m thick salt layer in the immediate roof acts as a beam, shearing along a thin overlying anhydrite/clay seam. Vertical separations between the immediate roof layer and the overlying strata are often observed at the anhydrite/clay seam above the centre of excavations of larger span (11 m). The floor of the excavations is comprised of a 1 m thick salt layer underlain by a 1 m thick predominately anhydrite layer (referred to as MB139). Fractures in MB139 develop beneath most excavations, with increased fracture frequency with drift span and age. In the excavations of larger span (11 m), MB139 eventually debonds along the underlying clay layer. The salt layer overlying MB139 develops both shear and tension failure. In a few locations below excavations of large span, continuous fracture systems are developing from rib to rib through MB139 and the overlying salt. In the ribs, there is limited fracturing within the first metre of most larger excavations. Vertical fractures develop in pillars at most intersections. The discontinuous behaviour is qualitatively consistent with analyses of the formation behaving as a layered medium (elastic beam analysis) and limited tensile and compressive failure of the rock salt. The significance of the discontinuous behaviour is that it can dominate the effective fluid transport properties of the formation near the excavation, and therefore requires consideration in the design of repository seals. Discontinuous behaviour must be monitored and is an important factor in the maintenance programme designed to assure a safe underground environment. 相似文献
5.
目前已被广泛应用的煤矿开采的关键层理论对煤矿岩层控制提供了重要理论依据,并合理解释了煤矿开采矿压显现现象。该理论认为煤矿开采引起的岩层破断、失稳后形成的铰接结构控制了覆岩的运移规律,但其忽略了层与层之间剪应力对覆岩破断运移规律的影响。基于岩层间存在剪应力这一假设,建立了覆岩组合梁力学模型,获得了非均质组合梁剪应力理论解;提出了考虑层间剪应力的关键层判断步骤,并修正了煤矿开采关键层破断距的计算公式;研究认为关键层控制的上覆岩层并不一定同时随其破断;基于双层岩层开采模型,分析提出了柔性控制层概念：即关键层破断后起到类似关键层作用而控制上覆一层或几层岩层变形的一类岩层;进一步提出了柔性控制层的判别方式,探讨了柔性控制层对关键层复合破断和矿压显现规律的影响,分析认为柔性控制层的存在一定程度上减弱了周期来压强度并产生二次伴随来压现象;结合工程案例,验证了该假设的合理性。 相似文献
6.
地下采矿是地面塌陷失决条件，自然重力及其他外界触发因素是其发展动因，地面塌陷受覆岩时代及岩性，采空区尺寸大小，煤层倾角，煤层厚度及开采深度，重复采动，水文条件变化，地形地势和松散盖层的影响。 相似文献
7.
近松散层开采覆岩导水裂隙带沟通上覆含水层导致了顶板水害事故的发生。在其他开采因素相似时,工作面顶板覆岩结构的不同会致使导水裂隙带发育高度出现较大差异。为此,通过收集淮北煤田17例近松散层开采覆岩导水裂隙带发育高度实测数据作为训练样本,利用一行两列向量对近松散层工作面顶板覆岩结构进行量化,并联合煤层采厚、煤层倾角、工作面斜长、开采深度、松散层厚度共计6个影响因素作为输入数据,实测导水裂隙带发育高度作为输出数据,依据径向基函数神经网络建立了考虑覆岩结构影响的近松散层开采导水裂隙带发育高度预测模型。并将该预测模型应用于淮北煤田中的青东煤矿,经钻孔冲洗液漏失量与钻孔彩色电视观测验证,获得预测结果相对误差为3.3%,低于《“三下”开采规范》中经验公式计算误差19.2%。该方法为近松散层开采导水裂隙带发育高度的合理确定提供了理论支持。 相似文献
8.
硬厚覆岩的破断与结构将发生显著的变化。针对汝箕沟煤矿二2煤层上覆厚层石英砂岩条件,采用现场实测、数值模拟、理论分析及现场试验等方法,研究了硬厚覆岩裂隙发育特征、破断运动、矿压显现特征及断顶控制技术,为硬厚覆岩工作面灾害防治提供了依据。研究表明,硬厚石英砂岩的微观结构致密完整,呈现大面积悬空、大步距破断运动,引起强烈的支架动载,甚至导致工作面风流逆转、沟通上部采空区隐形火区;硬厚岩层破断运移后产生明显的离层空间,并在开切眼上部和工作面上部及采空区中部形成覆岩主裂隙带,且发育高度大于经验计算数值,甚至与上方采空区沟通诱发灾害;实施开切眼深孔断顶爆破及降低工作面采高,有效缩短了硬厚岩层的初次破断步距,降低了支架动载及主裂隙带高度。 相似文献
9.
Kenneth S. Johnson 《Environmental Geology》1989,14(2):81-92
The Wink Sink, in Winkler County, Texas, is a collapse feature that formed in June 1980 when an underground dissolution cavity migrated upward by successive roof failures until it breached the land surface. The original cavity developed in the Permian Salado Formation salt beds more than 400 m (1,300 ft) below ground level. Natural dissolution of salt occurred in the vicinity of the Wink Sink in several episodes that began as early as Salado time and recurred in later Permian, Triassic, and Cenozoic times. Although natural dissolution occurred in the past below the Wink Sink, it appears likely that the dissolution cavity and resultant collapse described in this report were influenced by petroleum-production activity in the immediate area. Drilling, completion, and plugging procedures used on an abandoned oil well at the site of the sink appear to have created a conduit that enabled water to circulate down the borehole and dissolve the salt. When the dissolution cavity became large enough, the roof failed and the overlying rocks collapsed into the cavity. Similar collapse features exist where underground salt beds have been intentionally dissolved during solution mining or accidentally dissolved as a result of petroleum-production activity. 相似文献
10.
为了研究山区急倾斜煤层开采上覆岩层的弯曲变形规律,建立了上覆岩层弯曲变形的力学模型,运用弹性力学中的薄板弯曲理论,推导了上覆岩层弯曲挠度的预计公式,利用此公式对上覆岩层的弯曲挠度进行了计算。研究结果表明:(1)由于山区急倾斜煤层覆岩的线性荷载的作用,岩板的弯曲挠度曲线不再具有对称性,岩板弯曲挠度的最大值偏向于岩板倾斜的下山方向;(2)岩板弯曲挠度随着采深的增大而增大,岩板弯曲挠度最大值出现的位置逐渐由下山方向向采空区中点移动,但是最大挠度出现的位置不会越过采空区中点而位于倾斜岩板的上山方向;(3)岩板弯曲挠度随着山地倾角的增大而增大,岩板挠度最大值出现的位置距离采空区中点越来越远;(4)岩板弯曲挠度随着煤层倾角的增大而减小,岩板弯曲挠度最大值出现的位置距离采空区中点越来越远。 相似文献
11.
为了研究岩溶山区地下采矿活动对上覆岩层及山体的变形影响,依托贵州纳雍普洒“8.28”特大崩滑案例,在现场地质调查的基础上,分析了纳雍普洒“8.28”崩塌体特征和山体变形发展过程,采用UDEC离散元数值方法研究了地下采动作用诱发强烈岩溶山体崩滑失稳过程及变形特征。结果表明:山体上部灰岩溶蚀强烈,形成众多裂隙和岩溶管道,在地下采动作用下经历了较长的变形发展过程;地下采动影响下,山体上覆岩层向采空区方向变形,并随着顶板岩层冒落,岩层变形显著增大;上覆岩层深大裂隙对山体变形有重要影响,上部岩层沿着裂隙向下形成沉降带,同时裂隙也得以扩展;崩塌区前缘岩体由于开挖卸荷,向坡外发生挤出变形,前缘阻滑力降低;随着采空区不断扩大,山体稳定性不断降低,最终山体整体溃屈,发生破坏。普洒崩滑模式为“山体后缘拉裂沉陷—裂隙扩展贯通—整体溃屈”。本研究为开展西南地区地下采动对岩溶坡体稳定性影响评价提供借鉴。 相似文献
12.
应用覆岩空间结构学术观点对孤岛顶煤综放采场冲击矿压机制及其控制技术进行研究。根据覆岩关键层的岩性、层位、范围等因素,覆岩关键层空间结构分为覆岩空间大结构和基本顶有限矿压结构。孤岛顶煤采场冲击矿压发生机制：①孤岛顶煤综放采场 ? 型空间大结构形成过程是集中压力逐渐增加的过程,是该时间段发生冲击矿压的力源;②采场基本顶形成最下位 ? 型空间结构后,随着工作面推进,基本顶块体产生滑落失稳,造成工作面冲击矿压现象。通过对分段来压理论、基本顶结构失稳理论和坚硬顶板预断裂理论对覆岩关键层空间结构运动的控制作用研究,提出采用覆岩空间结构理论分析、分阶段降低放煤率、坚硬覆岩预爆泄压技术、覆岩坚硬岩层破裂的微地震监测技术等方式方法预防冲击矿压的发生。 相似文献
13.
晋城矿区15#煤直接顶K2石灰岩厚8～12 m,结构致密坚硬,为坚硬难垮落顶板。针对厚层石灰岩顶板可能面临的大面积断裂和垮落,从而导致冲击地压等问题,通过岩石力学性质试验获得相关岩层力学参数,并运用关键层理论、数值模拟和相似材料模型试验,研究了厚层脆韧性石灰岩顶板的变形与垮落特性,得到了顶板初次来压步距20～25 m和周期来压步距10～15 m及垮落规律,并提出了顶板控制的技术途径,即初期中深孔爆破结合顶板关键层缓慢下沉综合控制技术。实践表明,厚层石灰岩顶板的垮落形态和垮落步距与理论和试验研究结果基本一致。该项成果为晋城矿区厚层脆韧性石灰岩顶板控制提供了有效途径。 相似文献
14.
Summary In order to design roof bolting systems safely and economically, it is essential to understand the flexural behaviour of the immediate roof. Based on the strata sequence, the strata in the immediate roof are divided into three types. The flexural behaviour of the three strata types are investigated in terms of the following effects: roof span, horizontal stress, thickness and Young's modulus of the lowest strata.The suspension reinforcement mechanism is analysed using beam-column theory. The equations for the maximum bending stress, deflection and transferred bolt load for the bolted strata are derived. In the analysis, the bolt load is assumed to be a point load and a horizontal stress is uniformly applied to each stratum. The friction reinforcement mechanism is also investigated. The major function of roof bolting in this case is to create frictional resistance by tensioning the roof bolts so that the individual layers are combined into one single thick layer.A computer program and nomographs are developed for the determination of proper bolting pattern and bolt tension. It is hoped that this development can lead to maximum safety with minimum cost for the design of roof bolting systems in underground coal mines. 相似文献
15.
In order to master the tendency mining-fracture-evolution characteristics of overlying strata and coal seams above working face with large inclination angle and mining depth in mining process, the 1221 working face in Zhao mine is selected as the engineering background and a mathematical model is established. The displacement variation, stress and strain of overlying strata and coal seams are simulated by using ANSYS software. In the mining process, the movement characteristics, displacement variation laws and fracture evolution characteristics of overlying strata and coal seams above working face with large inclination angle and mining depth along inclination direction are discussed. Simulation results show that with the advance of working face, the fracture development of overlying strata and coal seams is larger and larger; the area of gob is gradually expanding and the transverse stress of overlying strata and coal seams is also expanding. Stress contour of overlying strata and coal seams at both ends of gob becomes denser and denser; the activity of the overlying strata and coal seams near the up-roadway side of the gob is violent. The pressure relief zone is formed in the upper part of the strata and the roof above the gob. Large inclination angle of coal seam results in larger supporting pressure in the underside of the gob and smaller supporting pressure in the upper side of the gob. Along the inclination direction of the working face, the pressure relief zone is mainly concentrated in the outlet roadway of the working face; the fracture development and strata separation are obvious, which offer good passage for gas flow and migration. 相似文献
16.
工作面长度的增加是导致采场矿压强度增加的原因之一。通过相似模拟试验证明了覆岩能破断成梯形台形态,并指出了梯形台形成机制及梯形台的参数计算原理。利用梯形台分析了工作面长度对覆岩破断规律的影响,指出了梯形台与关键层理论的关系。基于薄板理论推导了岩层破断步距的计算公式,分析了工作面长度对梯形台空间结构演化及采场矿压显现特征的影响。结果表明：由于覆岩按梯形台破断,工作面长度较短时,加载层厚度较小,来压强度小。对比研究了赵庄2号井1305大采高工作面（工作面长度为85 m）和1302大采高工作面（工作面长度为180 m）矿压特征。结果表明：1305工作面基于梯形台和薄板理论进行选型计算,支架计算工作阻力为4 738 kN,现场选用额定阻力5 500 kN能够满足顶板控制的要求;1302工作面基于梁理论进行选型计算,支架计算工作阻力为7 623 kN,现场需选用额定阻力7 800 kN才能满足顶板控制的要求。 相似文献
17.
俯伪斜分段密集采煤法三维有限元数值模拟研究 总被引：3，自引：0，他引：3
俯伪斜分段密集采煤法,作为一种较新的采煤方法,在我国技术上还不很成熟,因此,首次针对京煤集团木城涧矿大台井的地质条件和赋煤状况,通过简化建立三维立体有限元模型,模拟计算了该矿煤层顶底板在开采前后运动变化情况。结果表明:煤层倾角、推采距离和开采巷道数三者是影响煤层顶底板运动规律的重要因素,得到了表征顶底板运动规律的顶底板法向最大应力和法向最大位移与三影响因素关系曲线,详细阐述了三影响因素下的煤层顶底板运动规律;同时,对现场开采中支撑压力大小,特别是在三影响因素下,超前支撑压力的作用范围与应力峰值位置进行了数值计算,并总结了其影响规律;最后,指出了该数值分析方法对现场开采将具有十分重要的应用价值和指导意义。 相似文献
18.
根据浅埋煤层顶板岩层的赋存特点和长壁开采时基岩老顶的断裂下沉特征,应用初始后屈曲理论和突变理论探讨了初次来压期间基岩老顶的灾害机制和灾害控制,补充了基岩老顶破断后控制岩块滑落失稳的充分条件和岩块触矸前后台阶下沉的判据,确定了台阶下沉量,给出了控制台阶下沉和维持顶板稳定的支护力计算公式,并以神东矿区大柳塔1203工作面为例给出了工程实例。研究发现,顶板破断后岩块处于不平衡状态,台阶下沉的机制是结构的滑落失稳;岩块触矸前后的台阶下沉分别与断裂下沉和开采高度之间存在着确定的关系;顶板强烈来压主要是由结构滑落失稳造成的,控制台阶下沉的实质是控制岩块沿煤壁的滑落失稳。研究结果表明,综合应用初始后屈曲理论和突变理论,可根据顶板结构的赋存状况和结构特征,确定基岩老顶触矸前是否会出现全厚度切落;根据工作面的开采高度和采空区有效充填厚度等,可确定基岩老顶触矸后岩块的运动形式;根据顶板的破断步距、断裂下沉量和岩块摩擦因数等,可确定岩块触矸前后控制台阶下沉的支护力 相似文献
19.
Preventing roof collapse in underground cavities is a challenge to geotechnical engineering. In this study, three independent methods have been used to evaluate the roof collapse of underground rectangular cavities for a range of geometries and rock properties. The rock mass strength has been described by the Hoek–Brown failure criterion. The results of the analysis allow for prediction of roof collapse and to determine whether the failure surface that develops in the rock mass remains localised or extends through the full depth of cover. This is of significance if there are overlying cavities and when estimating surface subsidence. 相似文献
20.
针对阳城煤矿不等长工作面台阶区域发生冲击地压灾害问题,基于工作面特殊布置方式及覆岩赋存特征,采用理论分析、数值模拟和现场实测等方法,分析了台阶区域覆岩结构运动特征和围岩应力演化规律,研究了台阶区域冲击地压诱发机制。研究结果表明：1304工作面台阶区域覆岩经历了“OX-S-C”型较为复杂的结构演变,覆岩空间结构由OX向S型转换时,顶板岩层大面积破断下沉,在台阶区域形成多个悬臂梁结构,越往高位,悬臂梁长度越大;受覆岩运动和采动应力场叠加影响,煤岩体形成高应力集中区,在顶板岩层动载冲击作用下,煤岩体弹性应变能突然释放,诱发冲击地压。采用COMSOL软件对不同卸压钻孔参数下煤体应变能分布特征进行模拟研究,优化了台阶区域卸压钻孔参数。根据模拟结果,随着钻孔孔径、孔深增大及间距减小钻孔卸压效果越明显,考虑工程实际,确定孔径为150 mm、孔深为30 m、间距为1 m为合理有效的卸压钻孔参数,并应用于1302工作面台阶区域的冲击地压防治,取得了较好的防冲效果。 相似文献