首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 395 毫秒
1.
Siliceous sourced Tertiary oils from the Circum-Pacific area of Japan, Russia and the U.S.A. have a heavy carbon isotope composition, monomodal n-alkane distributions, and nearly identical regular sterane compositions with a predominance of C27 homologues. These are consistent with open marine depositional environments dominated by diatomaceous organic matter. However, a number of alkane and biomarker parameters such as Pr/Ph, CPI, relative concentration of 28,30-bisnorhopane, and the C35/C34 homohopane ratio indicate more oxic depositional environments for the source rocks of Japan and Russia. In contrast to the California Monterey Formation sourced oils, petroleums with low maturity levels from the North Sakhalin basin, Russia and the Akita basin, Japan have lower concentrations of asphaltenes and sulphur and are characterized by higher API gravities. A correlation of extractable organic matter from source rocks vs the least matured petroleums demonstrates that oil expulsion in siliceous shales of the Akita basin occurs at a maturity level corresponding to Ro≥0.65%, which is in the range of the conventional oil window (Ro = 0.6−1.1%).  相似文献   

2.
Levels of organic maturity of Mesozoic and Tertiary sequences outcropping in the Central Apennines have been established, using vitrinite reflectance techniques, the Thermal Alteration Index and fluorescence colours of organic matter dispersed in sediments. These results provide new constraints throughout the Meso-Cenozoic evolution of this crustal sector. In exploration geology, vitrinite reflectance provides data on hydrocarbon maturation by constraining organic matter maturity. In sedimentary basin modelling, it is adopted to define the palaeothermal regime. Vitrinite reflectance (Ro) also provides information on the burial history of sedimentary basins and may be employed to estimate tectonic uplift and erosion rates. Thermal Alteration Index (TAI) and fluorescence colour values can be correlated with Ro and may be used to estimate the degree of maturation when vitrinite is absent. Samples derived from the Sabini and Tiburtini Mts, in slope facies between the Latium–Abruzzi carbonate Platform and the Umbria–Marche pelagic Basin; from the Simbruini and Ernici Mts, in carbonate Platform facies, and from upper Miocene turbiditic deposits outcropping between the Olevano–Antrodoco Une, towards the West, and the Marsica slope facies, towards the East. Both the pre-terrigenous Meso-Cenozoic sequences show a low grade of organic maturity: the Sabini and Tiburtini Mts show Ro values that are less than 0.4%, and the Simbruini–Ernici Range show Ro values that range between 0.5% and 0.65%. Field analysis indicates that the cause of these low maturity levels is that thick sequences of turbidites were never deposited during the Neogene evolution of the Apennine thrust belt. Moreover, Upper Miocene turbiditic deposits also show low maturity levels, with Ro values that are less than 0.5%, indicating that these deposits were never overthrusted by huge volumes of rocks, during the chain building. The slight increase in the maturity level recorded in the Marsica area may be related to local heating along shear zones in areas of strike-slip tectonics.  相似文献   

3.
Organic-rich samples derived from a Middle Cambrian Formation in the Georgina Basin, and from the Middle Proterozoic of the McArthur Basin in northern and central Australia, yielded alginite ranging from immature oil shale material to overmature residue. A maturation scale has been developed based on the thermal evolution of alginite as determined from reflectance and fluorescence. The coalification path of alginite is marked by jumps in contrast to the linear path of wood-derived vitrinite. Six zones have been recognised, ranging from undermature (zone I), through the mature (zones II/III), followed by a stable stage of no change (zone IV) to the overmature (zones V and VI). The onset of oil generation in alginite as evident from the present study is at 0.3% Ro Alg. and is expressed in a change of fluorescence from yellow to brown, and a coalification jump from 0.3 to 0.6% Ro of Alg. In many boreholes zone III can be distinguished between 0.6 and 0.8% Ro of Alg. where subsequent oil generation occurs. Zones II and III represent the oil window.A zone of little or no change designated zone IV, at of alginite follows zones II/III. A marked coalification jump characterises zone V, where a pronounced change in reflectance occurs to >1.0% Ro Alg., signifying peak gas generation. The border of oil preservation lies at the transition of zone V and VI, at 1.6% Ro Alg. In zone VI gas generation only occurs.Comparison of reflectance results with experimental and geochemical pyrolysis data supports high activation energies for hydrocarbon generation from alginite, and therefore a later onset of oil generation than other liptinite macerals (i.e. cutinite, exinite, resinite) as well as a narrow oil window.Transmission electron microscopy (TEM) confirms that alginite does not go through a distinct intermediate stage but that the percentage of unreacted organic matter decreases as maturation proceeds. A clear distinction can be made in TEM between immature alginite, alginite after oil generation, and alginite residue following gas generation. Alginite beyond 1.6% Ro acquires very high densities and the appearance of inertinite in TEM.Bitumens/pyrobitumens make a pronounced contribution to the organic matter throughout the basins and have been shown to effect pyrolysis results by suppressing Tmax. The bitumens/pyrobitumens have been divided into four groups, based on their reflectance and morphology, which in turn appears to be an expression of their genetic history. Their significance is in aiding the understanding of the basins' thermal history, and the timing of oil and gas generation.  相似文献   

4.
A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%Ro or Tmax of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HImax. Similarly, QI increases to a maximum value, QImax. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or Tmax. This means that in humic coals the vitrinite reflectance or Tmax values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%Ro or Tmax range 440–455 °C and the oil window extends to 1.5–2.0%Ro or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%Ro or from 440 to 490 °C. Specific ranges for HImax and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HImax values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%Ro or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%Ro or Tmax of 440–445 °C.  相似文献   

5.
Based on the tested data of pressure and vitrinite reflectance of some wells in sedimentary basins, abnormal high pressure is regarded as not the only factor to retard the increase of vitrinite reflectance (R o). Apart from the types of the organic matter, the physical environment (temperature and pressure) and chemical environment (fluid composition and inorganic elements) will result in the abnormal vitrinite reflectance values in the sedimentary basins. This paper tested trace elements and vitrinite reflectance data from the the abnormal high pressure and normal pressure strata profiles, respectively, and found that the acidic and lower salinity starta are favorable for the increase of R o. By discussing the corresponding relationship between the contents of some trace elements in the mudstone and the vitrinite reflectance values, the typical trace elements were found to suppress and/or catalyze the vitrinite reflectance of organic matter, while the elements of Ca, Mn, Sr, B, Ba and P may result in the retardation of R o. However, elements of Fe, Co, Zn, Ni and Rb may catalyze the organic matter maturation. This study is conductive to the organic maturation correction, oil and gas assessment and thermal history reconstruction by the paleothermometry. Translated from Acta Geologica Sinica, 2006, 80(11): 1760–1769 [译自: 地质学报]  相似文献   

6.
Suberinite, and subereous components of amorphous nature, comprise largely unrecognized, proficient sources of liquid hydrocarbons. Due to difficulties in recognizing the presence of subereous components and suberinite in organic sediments, the contributions of these liptinitic components to the organic input of source rocks are easily underestimated. Severe chemical alterations of suberinite in the vitrinite reflectance range of Ro = 0.35–0.60% are demonstrated. Organic geochemical data, obtained from samples subjected to natural maturation, reveal that subereous components/suberinite undergoes early thermal degradation to generate large amounts of hydrocarbons below Ro = 0.60%. Data obtained from laboratory maturation of immature, suberinite-rich coals indicate that about 50% of the potential of suberinite for generating C12+ hydrocarbons has already been exhausted during natural maturation of the samples, prior to the onset of the traditionally defined “oil window”. The present data (a) contradict the assumption that suberinite is mainly sourced by selective preservation/enrichment of a stable, highly aliphatic biopolymer, i.e. “suberan” and (b) suggest that suberinite contains appreciable amounts of aliphatic and aromatic moieties which are released at low thermal stress.  相似文献   

7.
Thermal maturity was determined for about 120 core, cuttings, and outcrop samples to investigate the potential for coalbed gas resources in Pennsylvanian strata of north-central Texas. Shallow (< 600 m; 2000 ft) coal and carbonaceous shale cuttings samples from the Middle-Upper Pennsylvanian Strawn, Canyon, and Cisco Groups in Archer and Young Counties on the Eastern Shelf of the Midland basin (northwest and downdip from the outcrop) yielded mean random vitrinite reflectance (Ro) values between about 0.4 and 0.8%. This range of Ro values indicates rank from subbituminous C to high volatile A bituminous in the shallow subsurface, which may be sufficient for early thermogenic gas generation. Near-surface (< 100 m; 300 ft) core and outcrop samples of coal from areas of historical underground coal mining in the region yielded similar Ro values of 0.5 to 0.8%. Carbonaceous shale core samples of Lower Pennsylvanian strata (lower Atoka Group) from two deeper wells (samples from ~ 1650 m; 5400 ft) in Jack and western Wise Counties in the western part of the Fort Worth basin yielded higher Ro values of about 1.0%. Pyrolysis and petrographic data for the lower Atoka samples indicate mixed Type II/Type III organic matter, suggesting generated hydrocarbons may be both gas- and oil-prone. In all other samples, organic material is dominated by Type III organic matter (vitrinite), indicating that generated hydrocarbons should be gas-prone. Individual coal beds are thin at outcrop (< 1 m; 3.3 ft), laterally discontinuous, and moderately high in ash yield and sulfur content. A possible analog for coalbed gas potential in the Pennsylvanian section of north-central Texas occurs on the northeast Oklahoma shelf and in the Cherokee basin of southeastern Kansas, where contemporaneous gas-producing coal beds are similar in thickness, quality, and rank.  相似文献   

8.
The origin, depositional environment and maturity of petroleum source rocks were determined via conventional whole rock and biomarker analysis of samples from wells in the Banat Depression, where the most important Serbian oil and gas fields are located. The organic matter (OM) in organic-rich upper Tertiary siltstones and marls consists predominantly of Type II kerogen. Numerous biomarker parameters indicated mixed algal-terrestrial OM, related to a brackish or freshwater environment, whose salinity decreased from Middle to Upper Miocene. The OM was deposited under variable redox conditions, reducing to sub-oxic.The wells in the Banat Depression experienced variable high rates of rapid heating, providing an opportunity for examining the applicability of different thermal indicators in a hyperthermal basin. Rock-Eval and numerous biomarker parameters indicate that the main stage of oil generation begins at ca.130 °C and vitrinite reflectance (Rc) ca. 0.63% and reaches a maximum at ca.145-150 °C and Rc ca. 0.72-0.75%, while the late stage of oil generation starts at ca.155 °C and ca. Rc 0.78%, which corresponds, depending on geothermal gradient, to relative depths of 2100-2300 m, 2600-2900 m and 3050-3100 m, respectively. The naphthalene and phenanthrene maturity parameters proved to be less applicable than the biomarker ratios, particularly in the early to moderate maturation range. The newly proposed parameter C(14a)-homo-26-nor-17α(H)-hopane/C30hopane (C30HH/C30H) proved applicable to a wide range of maturity.  相似文献   

9.
The purpose of the study is to better understand the relationship between organic matter optical properties and the presence of potentially large oil and gas accumulations in Arctic Canada. The type and thermal maturity of the dispersed organic matter of the Mesozoic formations in the southern Sverdrup Basin, Melville Island, have been studied using organic petrology and Rock-Eval pyrolysis.All types of organic matter are present in the strata of Mesozoic age. Hydrogen-rich liptinite is dominated by alginite (Botryococcus and Tasmanites), dinoflagellate cysts and amorphous fluorescing matrix. Sporinite, cutinite, resinite and liptodetrinite made up the lesser hydrogen-rich exinite. Vitrinite reflectance in Cretaceous sediments ranges from 0.36 to 0.65% Ro; in Jurassic sediments it ranges from 0.40 to 1.0% Ro and in the Triassic from 0.45 to 1.30% Ro, showing an overall increase with depth of burial.Cretaceous sediments of the Deer Bay Formation are thermally immature and contain organic matter of terrestrial origin. The Upper Jurassic shales of the Ringnes Formation contain predominantly organic matter of liptinitic and exinitic origin with a considerable vitrinitic input. At optimum maturation levels, potential source beds of this formation would have a good hydrocarbon-generating potential. The hydrocarbon potential, however, would be limited to the generation of gases due to the leanness of the source rocks. Parts of the Lower Jurassic Jameson Bay Formation are organic-rich and contain a mixed exinitic/vitrinitic organic matter, Botryococcus colonial algae but visible organic matter is dominated by high plant remains (mainly spores). The Schei Point Group shales and siltstones contain organic matter of almost purely marine origin, whereas the predominantly higher plant-derived organic matter found in the Deer Bay, Jameson Bay and partly in the Ringnes formations have higher TOC. Among the Schei Point Group samples, the Cape Richards and Eden Bay members of the Hoyle Bay Formation are richer in TOC (>2.0%) than the Murray Harbour Formation (Cape Caledonia Member). This may reflect differences in the level of maturity or in the depositional environment (more anoxic conditions for the former).Regional variations in the level of thermal maturity of Mesozoic sediments in Sverdrup Basin appear to be a function of burial depth. The Mesozoic formations thicken towards the basin centre (NNE direction), reflecting the general pattern of increasing thermal maturity north of Sabine Peninsula. However, the regional thermal-maturation pattern of the Mesozoic is not solely a reflection of the present-day geothermal gradient, which indicates that anomalous zones of high geothermal gradient may have existed in the past, at least since when the Mesozoic sediments attained maximum burial depth. The contour pattern of the regional variation of maturity at the base of numerous Triassic formations is similar to that of the structural contours of the Sverdrup Basin, indicating that present-day maturation levels are largely controlled by basin subsidence.  相似文献   

10.
Greenschist facies rocks of the Poniklá Group (Ordovician-Silurian), Czech Republic, contain several types of carbonaceous matter that differ in their morphology, texture, reflectance and Raman characteristics. The first type consists of large (up to 3 mm) irregularly bound particles of low reflectance (Romin = 0.9%; Romax = 5.6%). The area ratio of the 1585 cm-1 to 1350 cm-1 Raman peaks (1.08–1.17) indicates an intermediate degree of graphitization. The formation of this type of highly porous particle, displaying a texture reminiscent of regular or needle coke, is attributed to the thermal alteration of the amorphous (structureless) kerogen of the precursor sediments. The second type consists of lamellar particles up to 30 μm thick, which can be associated with the latter or can occur independently in white mica-rich laminae. This type is characterized by high bireflectance (Romin = 0.6%; Romax = 11.9%) and by lower ratios (0.70–0.82) of the Raman peak areas. These particles are interpreted as the product of solid-state, diffusion-controlled graphitization of a chemically homogeneous organic material, e.g. of graptolite periderms. The third type consists of isometric, up to 2 mm large, commonly fractured grains and fragments which mainly occur in quartz-rich laminae. In reflected light, the texture is either homogeneous or consists of various types of anisotropic mozaics. The Raman peak area ratios (0.75–1.14) indicate a highly variable degree of structural ordering. These particles are considered as the remains of metamorphosed bitumens, accumulated in the sandy laminae of the original sediments. The fourth type consists of small particles of carbonaceous matter (maximum length 25 μm, thickness 1-2 μm), which occur adjacent to crystal faces of white micas. This type is probably the product of epitaxial growth of graphite from the gaseous phase. The results of this work indicate that the differences in the degree of graphitization of the carbonaceous matter in low-grade metamorphosed rocks can be mainly related to the initial nature of the sedimentary organic matter and to its premetamorphic history.  相似文献   

11.
《Applied Geochemistry》2005,20(10):1875-1889
Based on the systematic analyses of light hydrocarbon, saturate, aromatic fractions and C isotopes of over 40 oil samples along with related Tertiary source rocks collected from the western Qaidam basin, the geochemical characteristics of the Tertiary saline lacustrine oils in this region was investigated. The oils are characterized by bimodal n-alkane distributions with odd-to-even (C11–C17) and even-to-odd (C18–C28) predominance, low Pr/Ph (mostly lower than 0.6), high concentration of gammacerane, C35 hopane and methylated MTTCs, reflecting the high salinity and anoxic setting typical of a saline lacustrine depositional environment. Mango’s K1 values in the saline oils are highly variable (0.99–1.63), and could be associated with the facies-dependent parameters such as Pr/Ph and gammacerane indexes. Compared with other Tertiary oils, the studied Tertiary saline oils are marked by enhanced C28 sterane abundance (30% or more of C27–C29 homologues), possibly derived from halophilic algae. It is noted that the geochemical parameters of the oils in various oilfields exhibit regular spatial changes, which are consistent with the depositional phase variations of the source rocks. The oils have uncommon heavy C isotopic ratios (−24‰ to −26‰) and a flat shape of the individual n-alkane isotope profile, and show isotopic characteristics similar to marine organic matter. The appearance of oleanane and high 24/(24 + 27)-norcholestane ratios (0.57–0.87) in the saline oils and source rocks confirm a Tertiary organic source.  相似文献   

12.
Thermogravimetric Fourier transform infrared spectroscopy (TG-FTIR) analyses were carried out on two sets of isolated kerogens covering a wide maturity range from low mature (0.46% Ro) through the end of oil and gas generation (maximum Ro = 5.32%). Data onweight percent and Tmax for evolution of methane, volatile tars, ethylene, SO2, NH3, CO2, and CO are reported. The Tmax of methane shows the most consistent response to increasing maturation in both sets of samples. Results are comparable to those of whole rocks from an Alaskan North Slope well analyzed previously. The collective data for both whole rocks and isolated kerogens shows a generally linear correlation between %Ro and Tmax of methane, with the exception of Ro of about 2.0% where a dip in the curve occurs. The slope of the correlation line was steeper for the predominantly terrigenous Wilcox kerogen than for more marine Colorado kerogen or for the Alaskan North Slope whole rock samples, probably reflecting differences in the chemical nature of various kerogen sets, which is also reflected by differences in the shapes of the pyrolysis curves of SO2, CO2, CO, H2O, and ethylene. These preliminary data indicate that Tmax of methane is a good maturation indicator for whole rocks and isolated kerogens up to an Ro of about 4%, which includes all of the wet gas and a considerable portion of the dry gas generation zones. This correlation was also observed for samples containing migrated bitumen, where it was not possible to obtain a reliable Tmax for the volatile tar (S2) peak. The more terrigenous Wilcox kerogens also showed a good correlation of the Tmax of ethylene with %Ro. Tmax of ammonia evolution did not correlate with maturity and occurred 100–200°C lower than previously found for whole rocks, consistent with a whole-rock source of pyrolytic ammonia for Alaskan whole rock samples. HI and OI indices were calculated in several ways and plotted to reflect kerogen type as well as both the residual oil and gas generation potential. The ratio of pyrolyzable to combustible sulfur (evolved as SO2) was independent of maturity and showed a clear difference between the more terrigenous Wilcox kerogens and the more marine Colorado kerogens.  相似文献   

13.
Gas generation in the deep reaches of sedimentary basins is usually considered to take place via the primary cracking of short alkyl groups from overmature kerogen or the secondary cracking of petroleum. Here, we show that recombination reactions ultimately play the dominant role in controlling the timing of late gas generation in source rocks which contain mixtures of terrigeneous and marine organic matter. These reactions, taking place at low levels of maturation, result in the formation of a thermally stable bitumen, which is the major source of methane at very high maturities. The inferences come from pyrolysis experiments performed on samples of the Draupne Formation (liptinitic Type II kerogen) and Heather Formation (mixed marine-terrigeneous Type III kerogen), both Upper Jurassic source rocks stemming from the Norwegian northern North Sea Viking Graben system. Non-isothermal closed system micro scale sealed vessel (MSSV) pyrolysis, non-isothermal open system pyrolysis and Rock Eval type pyrolysis were performed on the solvent extracted, concentrated kerogens of the two immature samples. The decrease of C6+ products in the closed system MSSV pyrolysis provided the basis for the calculation of secondary gas (C1-5) formation. Subtraction of the calculated secondary gas from the total observed gas yields a “remaining” gas. In the case of the Draupne Formation this is equivalent to primary gas cracked directly from the kerogen, as detected by a comparison with multistep open pyrolysis data. For the Heather Formation the calculated remaining gas formation profile is initially attributable to primary gas but there is a second major gas pulse at very high temperature (>550 °C at 5.0 K min−1) that is not primary. This has been explained by a recondensation process where first formed high molecular weight compounds in the closed system yield a macromolecular material that undergoes secondary cracking at elevated temperatures. The experiments provided the input for determination of kinetic parameters of the different gas generation types, which were used for extrapolations to a linear geological heating rate of 10−11 K min−1. Peak generation temperatures for the primary gas generation were found to be higher for Heather Formation (Tmax = 190 °C, equivalent to Ro appr. 1.7%) compared to Draupne Formation (Tmax = 175 °C, equivalent to appr. Ro 1.3%). Secondary gas peak generation temperatures were calculated to be 220 °C for the Heather Formation and 205 to 215 °C for the Draupne Formation, respectively, with equivalent vitrinite reflectance values (Ro) between 2.4% and 2.0%. The high temperature secondary gas formation from cracking of the recombination residue as detected for the Heather Formation is quantitatively important and is suggested to occur at very high temperatures (Tmax approx. 250 °C) for geological heating rates. The prediction of a significant charge of dry gas from the Heather Formation at very high maturity levels has important implications for petroleum exploration in the region, especially to the north of the Viking Graben where Upper Jurassic sediments are sufficiently deep buried to have experienced such a process.  相似文献   

14.
The Sylhet Basin of Bangladesh is a sub-basin of the Bengal Basin. It contains a very thick (up to 22 km) Tertiary stratigraphic succession consisting mainly of sandstones and mudstones. The Sylhet succession is divided into the Jaintia (Paleocene–late Eocene), Barail (late Eocene–early Miocene), Surma (middle–late Miocene), Tipam (late Miocene–Pliocene) and Dupitila Groups (Pliocene–Pleistocene), in ascending order. The origin of the organic matter (OM) and paleoenvironment of deposition have been evaluated on the basis of C, N, S elemental analysis, Rock-Eval pyrolysis and gas chromatography–mass spectrometry (GC–MS) analysis of 60 mudstone samples collected from drill core and surface outcrops. Total organic carbon (TOC) content ranges from 0.11% to 1.56%. Sulfur content is low in most samples. TOC content in the Sylhet succession varies systematically with sedimentation rate, with low TOC caused by clastic dilution produced by high sedimentation rates arising from rapid uplift and erosion of the Himalaya.The OM in the succession is characterized by systematic variations in pristane/phytane (Pr/Ph), oleanane/C30 hopane, n-C29/n-C19 alkane, Tm/Ts [17α(H)-22,29,30-trisnorhopane/18α(H)-22,29,30-trisnorhopane] and sterane C29/(C27 + C28 + C29) ratios during the middle Eocene to Pleistocene. Based on biomarker proxies, the depositional environment of the Sylhet succession can be divided into three phases. In the first (middle Eocene to early Miocene), deposition occurred completely in seawater-dominated oxic conditions, with abundant input of terrestrial higher plants, including angiosperms. The second phase (middle to late Miocene) consisted of mainly freshwater anoxic conditions along with a small seawater influence according to eustasic sea level change, with diluted OM derived from phytoplankton and a lesser influence from terrestrial higher plants. Oxygen-poor freshwater conditions prevailed in the third phase (post-late Miocene). Planktonic OM was relatively abundant in this stage, while a high angiosperm influx prevailed at times. Tmax values of ca. 450 °C, vitrinite reflectance (Ro) of ca. 0.66% and methylphenanthrene index (MPI 3) of ca. 1 indicate the OM to be mature. The lower part (middle Eocene to early Miocene) of the succession with moderate TOC content and predominantly terrestrial OM could have generated some condensates and oils in and around the study area.  相似文献   

15.
This paper presents data and preliminary interpretations on the diagenesis of Early Paleozoic continental margin deposits along a traverse of the Quebec Appalachians near Quebec City, Canada. Regional variations in diagenesis were studied using the thermal maturation of organic matter in shales (reflectance measured on asphaltic bitumen, 105 samples) and illite crystallinity (330 samples). These revealed a regional southeastward increase in grade from the late middle and late stage of diagenesis to epimetamorphism, which is reflected in the distinction of four zones: Zone I representing the late middle diagenetic stage has a mean reflectance in oil (R0) between 1.0 and 1.5% and illite crystallinity between 5.5 and 8.0 mm. Zone II (late diagenetic stage) is characterized by R0=1.5–2.6% and illite crystallinity between 3.5 and 5.5 mm. Anomalously poor illite crystallinities in Zone II (i. e. 5.5 to 8.0 mm) were obtained for black shales, in which improvement of crystallinity lags behind red and green shales. Zone II is subdivided into subzones IIA and IIB. In the former, reflectance and illite crystallinity increase, within individual nappes, as a function of age or depth of burial. In the latter no such dependence is observed, instead diagenetic grade increases regionally in a southeastward direction as it does in zones III and IV. Zone III represents the anchizone in which observed reflectance values R0 range from 2.6 to 4.0% and illite crystallinities from 2.0 to 3.1 mm. In Zone IV (epizone) illite crystallinity is less than 2.0 mm (In terms of reflectance the anchi-zone/epizone boundary was not defined). Zones I and IIA are anomalous in that lower tectonic units are diagenetically less altered than higher tectonic units: R0 varies from 1.71 to 2.30% for the highest tectonic unit (Cambrian Chaudière Nappe), 1.53 to 1.90% (Cambro-Ordovician Bacchus Nappe) and 1.08 to 1.46% (Lower Ordovician Pointe-de-Lévy Nappe) for the middle tectonic units, and 1.01 to 1.15% for the lowest tectonic unit (Middle Ordovician Quebec Promotory Nappe). Thermal maturation and mineral diagenesis in zone IIA are probably due solely to sedimentary burial at the original site of deposition (by an estimated 6 to 7 km of younger sediments) because in this zone the highest diagenetic grade occurs in the highest tectonic unit. Diagenesis in the nappes of zone I probably required additional tectonic burial by the higher nappes because original sedimentary thicknesses that once overlay these Lower and Middle Ordovician rocks appear insufficient to have caused the observed degree of diagenesis. Diagenesis in zone IIA, therefore, was most likely formed entirely before orogenesis; in zone I it is probably partly pre-orogenic in origin and has been transported during nappe-movement. In contrast, diagenesis and metamorphism in zones IIB to IV are interpreted as related to regional synorogenic heating in conjunction with the Taconic orogeny. Thermal maturation levels in zone I indicate that the rocks have not yet passed the “oil window” which is of interest for petroleum exploration in Quebec. An extended English version of this paper is in preparation for the Bulletin of Canadian Petroleum Geology (Ogunyomi et al., ms.).  相似文献   

16.
Abstract

Small- and medium-sized basins are widely distributed, and some contain commercial gas reservoirs demonstrating their gas-generation potential. The Xuanhua Basin, which is a small-sized coal-bearing basin in north China, includes a promising target for shale-gas exploration in the Xiahuayuan Formation. In this study, we used this basin as a case study to assess the critical geochemical features for small or medium-sized basins to form commercial gas reservoirs. Total organic carbon (TOC) analysis, Rock-Eval pyrolysis, microscopic observation of macerals, vitrinite reflectance measurement and kerogen stable carbon isotope analysis were performed to characterise the organic geochemistry of the Xiahuayuan shales. The original total organic carbon (TOCo) content and hydrocarbon-generative potential (S2o) were reconstructed to further evaluate the gas-generation potential of these shales. In addition, geochemical data of shales from other similar-sized basins with gas discoveries were compared. The results showed that the kerogen from the Xiahuayuan Formation is Type III (gas-prone), and macerals are dominated by vitrinite. TOC values showed a strong heterogeneity in the vertical profiles, with most higher than 1.5?wt%. The measured Ro values ranged from 1.4 to 2.0%. However, thermal maturity was not correlated with the present-day burial depth with higher maturity in the wells closest to the diabase intrusion centre. The remaining generation potential (S2) averaged 0.91?mg HC/g rock, equal to 1.4?cm3 CH4/g rock, and the average amount of hydrocarbon generated was 4.33?cm3 CH4/g rock. In small and medium-sized basins, the TOC content of commercially developed gas shales ranged from 0.5 to 2.5?wt%, organic matter was mainly humic (gas-prone), and the burial depth was generally shallow. Biogenic gas reservoirs for commercial exploitation tend to have larger shale thicknesses (120–800?m) than thermogenic gas reservoirs (60–90?m).

  1. The Xiahuayuan Formation is a good gas-source rock with gas-prone kerogen type, relatively high TOC values and moderate thermal maturity.

  2. The average amount of hydrocarbon generated from the Xiahuayuan shales is about 4.33?cm3 CH4/g rock, indicating a potential to form a shale gas reservoir.

  3. Owing to the influence of diabase intrusions, the Xiahuayuan shales have entered the dry gas window at relatively shallow-buried depths.

  4. Small- and medium-sized basins have the potential to generate commercial gas reservoirs with the generated volume mainly a product of the thickness and maturity of black shales.

  相似文献   

17.
Denudation rates from cosmogenic 10Be measured in quartz from recent river sediment have previously been used in the Central Alps to argue that rock uplift occurs through isostatic response to erosion in the absence of ongoing convergence. We present new basin-averaged denudation rates from large rivers in the Eastern and Southern European Alps together with a detailed topographic analysis in order to infer the forces driving erosion. Denudation rates in the Eastern and Southern Alps of 170–1,400 mm ky−1 are within a similar range to those in the Central Alps for similar lithologies. However, these denudation rates vary considerably with lithology, and their variability generally increases with steeper landscapes, where correlations with topographic metrics also become poorer. Tertiary igneous rocks are associated with steep hillslopes and channels and low denudation rates, whereas pre-Alpine gneisses usually exhibit steep hillslopes and higher denudation rates. Molasse, flysch, and schists display lower mean basin slopes and channel gradients, and, despite their high erodibility, low erosion rates. Exceptionally low denudation rates are also measured in Permian rhyolite, which has high mean basin slopes. We invoke geomorphic inheritance as a major factor controlling erosion, such that large erosive glaciers in the late Quaternary cold periods were more effective in priming landscapes in the Central Alps for erosion than in the interior Eastern Alps. However, the difference in tectonic evolution of the Eastern and Central Alps potentially adds to differences in their geomorphic response; their deep structures differ significantly and, unlike the Central Alps, the Eastern Alps are affected by ongoing tectonic influx due to the slow motion and rotation of Adria. The result is a complex pattern of high mountain erosion in the Eastern Alps, which has evolved from one confined to the narrow belt of the Tauern Window in late Tertiary time to one affecting the entire underthrust basement, orogenic lid, and parts of the Southern Alps today.  相似文献   

18.
The quantitative maceral study of the Queen seam from Mailaram coalfield of Godavari valley has displayed alternate coal bands rich in vitrinite/liptinite or inertinite. The random vitrinite reflectance (Ro max. %) of these coals, from top part ranges from 0.50 to 0.64%. However, the bottom part of the seam has indicated lower reflectance, between 0.49 and 0.52%. Thus, the Queen seam, in general, has attained high volatile bituminous C rank. The study indicates that the depositional site has been a slowly sinking basin that witnessed alternate dry (oxidizing) and wet (reducing) spells. This subsequently caused fluctuation in water table of the basin and the formation of oxic and anaoxic moor condition, where accumulated vegetal resource transformed into mixed and fusic coal types in due course of time. Being high in liptinite and vitrinite contents and low mineral matter, the Queen seam of Mailaram coalfield has high economic potential.  相似文献   

19.
<正>The Bohai Bay Basin is a Mesozoic subsidence and Cenozoic rift basin in the North China Craton.Since the deposition of the Permo-Carboniferous hydrocarbon source rock,the basin has undergone many tectonic events.The source rocks have undergone non-uniform uplift,twisting,deep burying,and magmatism and that led to an interrupted or stepwise during the evolution of hydrocarbon source rocks.We have investigated the Permo-Carboniferous hydrocarbon source rocks history of burying,heating,and hydrocarbon generation,not only on the basis of tectonic disturbance and deeply buried but also with new studies on apatite fission track analysis,fluid inclusion measurements,and the application of the numerical simulation of EASY%R_o.The heating temperature of the source rocks continued to rise from the Indosinian to Himalayan stage and reached a maximum at the Late Himalayan.This led to the stepwise increases during organic maturation and multiple stages of hydrocarbon generation.The study delineated the tectonic stages, the intensity of hydrocarbon generation and spatial and temporal distribution of hydrocarbon generations.The hydrocarbon generation occurred during the Indosinian,Yanshanian,and particularly Late Himalayan.The hydrocarbon generation during the late Himalayan stage is the most important one for the Permo-Carboniferous source rocks of the Bohai Bay Basin in China.  相似文献   

20.
The organic maceral suberinite is widely believed to be a contributor to immature or low mature oils with Ro < 0.5% in some coal and terrigenous sequences. However, its evolution of hydrocarbon generation, especially in the relatively high maturation stage of Ro > 0.5%, has not been sufficiently characterized. This issue was addressed herein using periderm cork tissues of the modern angiosperm Quercus suber (suberin), which is a possible bio-precursor of suberinite, in artificial bacterial degradation and hydrous pyrolysis experiments. Integrated studies were conducted, including analyses on the compositions of hydrocarbon yields and the content variations that were generated during the experiments, gas chromatography (GC) analyses of generated oils and spectral fluorescence observations, and Rock-Eval and Fourier Transform Infrared (FTIR) microspectroscopic studies on solid residues. Analytical results indicate that suberin and suberinite have long and complex hydrocarbon generation histories. In general, the hydrocarbon that is generated during bacterial degradation is predominantly gas and present in relatively limited amounts, while the oils mainly are generated during hydrous pyrolysis. Furthermore, the oil generation has two peaks that correspond to Ro of approximately 0.35–0.50% and 0.80–1.10%. In composition, the early generated oil mainly consists of long chain waxy and oxygen containing compounds, while the late generated oil is relatively enriched in aromatic compounds. These features can be ascribed to the chemical nature (e.g., composition and structure) of suberin. It is a type of insoluble and high molecular weight polyester compound that contains large quantities of long chain structure dicarboxylic acids and alcohols. Consequently, the deoxygenization of these compounds can take place under relatively low thermodynamic conditions, generating liquid oil that is dominated by a long chain structure and oxygen-containing waxy compounds. In contrast, the degradation of the phenolic compounds results in the second oil generation peak. Therefore, suberinite has a two stage and relatively long oil generation history and is a good bio-precursor for coal-derived oil generation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号