首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Primitive olivine-mica-K-feldspar lamprophyre dykes, dated at 1831 ± 6 Ma, intrude lower greenschist facies rocks of the Early Proterozoic Pine Creek Inlier, of northern Australia. They are spatially, temporally and probably genetically associated with a post-tectonic composite granite-syenite pluton (Mt. Bundey pluton). The dykes have unusually high contents of large-ion-lithophile (LILE) and LREE elements (e.g. Ba up to 10,000 ppm, Ce up to 550 ppm, K2O up to 7.5 wt. %) that resemble the concentrations found in the West Kimberley olivine and leucite lamproites. However, mineralogically the Mt. Bundey lamprophyres resemble shoshonitic lamprophyres and lack any minerals diagnostic of lamproites; leucite or leucite-pseudomorphs are absent. Mineral compositions are also unlike those in lamproites: micas contain higher Al2O3 than lamproitic mica; amphiboles are secondary actinolites after diopside; and oxides consist of zincian-chromian magnetite and groundmass magnetite. Heavy mineral concentrates contain mantle-derived xenocrysts of magnesiochromite, pyrope, Cr-diopside and rutile indicating a depth of sampling > 70 km. The Mt. Bundey lamprophyres are non-peralkaline to borderline peralkaline (molar (K + Na)/Al = 0.8 − 1.0) and potassic rather than ultrapotassic (molar K/Na < 2.5). They have distinctive major element compositions (≈46−49 wt. % SiO2, ≈1.5−2 wt. % MgO, ≈7 wt. % CaO), and element ratios (e.g. molar Al/Ti ≈10, K/Na ≈2) that indicate they are best classified amongst transitional lamproites, i.e. potassic rocks such as cocites, jumillites and Navajominettes, that have geochemical characteristics transitional between Groups I and III. (Foley et al., 1987). The Mt. Bundey lamprophyres have LILE enrichment patterns that resemble the W. Kimberley pamproites but have moderate negative Ta---Nb---Ti anomalies and HREE abundances that are closely similar to the jumillites of southeastern Spain and Mediterranean-type lamproites. Single-stage modelling of Rb---Sr data is consistent with enrichment of the source-region of the Mt. Bundey lamprophyres ≈ 120–170 Ma before partial melting; i.e. at 1.95–2.10 Ga. Source enrichment does not appear to be associated with subduction processes, but may instead relate to incipient rifting of the Archaean basement. Negative Ta---Nb---Ti anomalies in the Mt. Bundey dykes may, therefore, relate to stability of residual titanate minerals in an oxidized subcontinental mantle source. This view is supported by high Fe3+/ΣFe ratios of mantle-derived magnesiochromite xenocrysts which indicate oxidized mantle conditions (ƒo2 ≈ FMQ + 1 long units), and by the presence of xenocrystic Cr-bearing rutile. Although the Mt. Bundey dykes have sampled upper mantle material, the oxidized nature of the magma source-region, and of the magma itself, suggests that conditions may not be favourable for diamond survival at depth nor for diamond transport in transitional lamproite magmas of this kind.  相似文献   

2.
《Ore Geology Reviews》2003,22(3-4):143-175
The Mt. Todd Mine (also known as the Yimuyn Manjerr Mine), located approximately 40 km northwest of the township of Katherine, in the Northern Territory, Australia, is host to several discrete ore bodies that strike NNE within a broad NE-trending corridor of gold mineralisation. The mine lies in the southern region of the Central Domain of the Pine Creek Inlier (PCI) and is hosted by a Palaeoproterozoic sequence of rocks termed the Burrell Creek Formation, which is dominated by greywacke, siltstone, sandstone and shale that exhibit sedimentary features akin to those of a river-dominant delta front to prodelta environment. The formation is conformably overlain by volcanoclastic and volcanolithic sedimentary rocks of the Tollis Formation (∼1890 Ma).Three deformation events are recognised in the Mt. Todd region, D1, D2 and D3. The earliest deformation, D1, is characterised by close to tight, NE to N to NW-trending asymmetric folds (F1), and a continuous axial–planar cleavage (S1). The deformation is associated with the development of conjugate buck–quartz veins and was preceded by the emplacement of the Yenberrie Leucogranite, which produced contact metamorphism of the sedimentary rocks of the Burrell Creek Formation to hornblende–hornfels facies (H1), with the development of cordierite porphyroblasts (type C1). D1 was coincident with peak regional metamorphism to greenschist facies.D2 is associated with westerly trending open folds (F2), and a spaced disjunctive to fracture cleavage (S2) in transection to the folds. It was preceded by the emplacement of the Tennysons Leucogranite of the Cullen Batholith (1835–1820 Ma), which produced contact metamorphism of the Yenberrie Leucogranite and the sedimentary rocks of the Burrell Creek and Tollis formations to hornblende–hornfels facies (H2), with the development of cordierite porphyroblasts (type C2).D3 is characterised by the reactivation of strike-slip faults (mostly sinistral), a steeply dipping Type S3-C type foliation, and mesoscopic en échelon folds (F3) that trend oblique to the faults in a left stepping (sinistral) array.The age of emplacement of the Tennysons Leucogranite, and the timing of D1 and D2 are broadly constrained by the age of emplacement of the Cullen Batholith at 1835–1800 Ma. D1 and D2 are correlated with deformation during the Maud Creek Event (∼1850 Ma), while D3 is correlated with deformation during the Shoobridge Event (∼1780 Ma). The age of the Yenberrie Leucogranite is constrained to the age of emplacement of granite batholiths at 1870–1860 Ma.A temporal and broad structural relationship exists between D2 structures, the Tennysons Leucogranite, and the several gold-bearing quartz–sulphide veins and lode systems of the Mt. Todd Mine. The systems appear to have formed after peak thermal metamorphism associated with the emplacement of the pluton at about 1825 Ma, and early in D2, prior to the development of the regional S2 fabric. W–Mo–Sn–Bi–Cu greisen-type mineralisation in the carapace of the Yenberrie Leucogranite of the Yenberrie Wolfram Field constitutes a discrete mineralising event that preceded the emplacement of the Tennysons Leucogranite.  相似文献   

3.
Structural mapping integrated with interpretation and forward modelling of aeromagnetic data form complimentary and powerful tools for regional structural analysis because both techniques focus on architecture and overprinting relationships. This approach is used to constrain the geometry and evolution of the sparsely exposed Mount Woods Inlier in the northern Gawler Craton. The Mount Woods Inlier records a history of poly-phase deformation, high-temperature metamorphism, and syn- and post-orogenic magmatism between ca. 1736 and 1584 Ma. The earliest deformation involved isoclinal folding, and the development of bedding parallel and axial planar gneissic foliation (S1). This was accompanied by high-temperature, upper amphibolite to granulite facies metamorphism at ca. 1736 Ma. During subsequent north–south shortening (D2), open to isoclinal south–southeast-oriented F2 folds developed as the Palaeoproterozoic successions of the inlier were thrust over the Archaean nuclei of the Gawler Craton. The syn-D2 Engenina Adamellite was emplaced at ca. 1692 Ma. The post-D2 history involved shear zone development and localised folding, exhumation of metamorphic rocks, and deposition of clastic sediments prior to the emplacement of the ca. 1584 Ma Granite Balta Suite. The Mount Woods Inlier is interpreted as the northern continuation of the Kimban Orogen.  相似文献   

4.
The geology of the No 1 and 3 pits at the Ranger Mine in the Pine Creek Inlier (PCI) of Australia is dominated by Palaeoproterozoic volcanic, carbonate and sedimentary sequences that unconformably overlie Archaean granitic gneiss of the Nanambu Complex (2470±50 Ma). These sequences are folded, faulted and sheared, and crosscut by east-trending granite (sensu stricto) dykes and pegmatite veins, and gently dipping N–NE trending mafic dykes of the Oenpelli Dolerite (1690 Ma). Regional metamorphism is to greenschist facies and contact metamorphism is to hornblende-hornfels facies.The rocks of the Ranger Mine have been subjected to at least two phases of ductile–brittle deformation (D2–D3) and one phase of brittle deformation (D4). These events were preceded by regional diastathermal or extension-related metamorphism (D1) and the development of an ubiquitous bedding-parallel cleavage (S1).D2 resulted in the development of NNE–NNW trending mesoscopic folds (F2) and a network of thrusts and dextral reverse shears. The modelled palaeo-stress directions for the emplacement of pegmatite veins suggests that they formed early in D2. D3 resulted in the development of WNW–NW trending mesoscopic folds (F3), a weakly defined axial planar cleavage (S3) and sinistral reactivation of D2 shears. D2–D3 are correlated with deformation during the Maud Creek Event of the Top End Orogeny (1870–1780 Ma), while the emplacement of granite dykes and pegmatite veins is correlated with emplacement of regional granites at 1870–1860 Ma.D4 is associated with brittle deformation and resulted in the development of normal faults and fault breccias during a period of east–west extension. This event is correlated with regional east–west extension during deposition of Palaeo- to Mesoproterozoic platform sequences.The sequence of tectonic events established in this study indicates that uranium-bearing ore shoots in the Ranger No 1 and 3 pits formed during extension in D4, and after emplacement of the Oenpelli Dolerite at 1690 Ma. However, the currently accepted 1737±20 U–Pb Ma age places the mineralising event at time of regional post-orogenic erosion, after the Top End Orogeny and before emplacement of the Oenpelli Dolerite and extension in D4. The U–Pb age is not consistent with Sm–Nd ages for primary uranium mineralisation at Nabarlek and Jabiluka at 1650 Ma [Econ. Geol. 84 (1989) 64] and does not concur with currently accepted regional tectonic data of Johnston [Johnston, J.D., 1984. Structural evolution of the Pine Creek Inlier and mineralisation therein, Northern Territory, Australia. Unpublished PhD Thesis, Monash University, Australia], Needham et al. [Precambrian Res. 40/41 (1988) 543] and others. Consequently, the absolute age of uranium mineralisation at the Ranger Mine is open.  相似文献   

5.
Structural overprinting relationships indicate that two discrete terranes, Mt. Stafford and Weldon, occur in the Anmatjira Range, northern Arunta Inlier, central Australia. In the Mt. Stafford terrane, early recumbent structures associated with D1a,1b deformation are restricted to areas of granulite facies metamorphism and are overprinted by upright, km-scale folds F1c), which extend into areas of lower metamorphic grade. Structural relationships are simple in the low—grade rocks, but complex and variable in higher grade equivalents. The three deformation events in the Mt. Stafford terrane constitute the first tectonic cycle (D1-D2) deformation in the Weldon terrane comprises the second tectonic cycle. The earliest foliation (S2a) was largely obliterated by the dominant reclined to recumbent mylonitic foliation (S2b), produced during progressive non-coaxial deformation, with local sheath folds and W- to SW-directed thrusts. Locally, (D2d) tectonites have been rotated by N—S-trending, upright (F2c) folds, but the regional upright fold event (F2d), also evident in the adjacent Reynolds Range, rotated earlier surfaces into shallow-plunging, NW—SE-trending folds that dominate the regional outcrop pattern.The terranes can be separated on structural, metamorphic and isotopic criteria. A high-strain D2 mylonite zone, produced during W- to SW-directed thrusting, separates the Weldon and Mt. Stafford terranes. 1820 Ma megacrystic granites in the Mt. Stafford terrane intruded high-grade metamorphic rocks that had undergone D1a and D1b deformation, but in turn were deformed by S1c, which provides a minimum age limit for the first structural—metamorphic event. 1760 Ma charnockites in the Weldon terrane were emplaced post-D2a, and metamorphosed under granulite facies conditions during D2b, constraining the second tectonic cycle to this period.Each terrane is associated with low-P, high-T metamorphism, characterized by anticlockwise P—T—t paths, with the thermal peaks occurring before or very early in the tectonic cycle. These relations are not compatible with continental-style collision, nor with extensional tectonics as the deformation was compressional. The preferred model involves thickening of previously thinned lithosphere, at a stage significantly after (>50 Ma) the early extensional event. Compression was driven by external forces such as plate convergence, but deformation was largely confined to and around composite granitoid sheets in the mid-crust. The sheets comprise up to 80% of the terranes and induced low-P, high-T metamorphism, including migmatization, thereby markedly reducing the yield strength and accelerating deformation of the country rocks. Mid-crustal ductile shearing and reclined to recumbent folding resulted, followed by upright folding that extended beyond the thermal anomaly. Thus, thermal softening induced by heat-focusing is capable of generating discrete structural terranes characterized by subhorizontal ductile shear in the mid-crust, localized around large granitoid intrusions.  相似文献   

6.
The Golden Mile deposit was discovered in 1893 and represents today the largest Archaean orogenic lode gold system in the world (50 M oz produced gold). The Golden Mile deposit comprises three major styles of gold mineralisation: Fimiston, Oroya and Charlotte styles. Fimiston-style lodes formed at 250 to 350 °C and 100 to 200 MPa and are controlled by brittle–ductile fault zones, their subsidiary fault zone and vein networks including breccias and open-cavity-infill textures and hydrothermally altered wall rock. Fimiston lodes were formed late D1, prior to D2 regional upright folding. Hydrothermal alteration haloes comprise a progression toward the lode of diminishing chlorite, an increase in sericite and in Fe content of carbonates. Lodes contain siderite, pyrite, native gold, 17 different telluride minerals (Au–Ag tellurides contain ~25% of total gold), tourmaline, haematite, sericite and V-rich muscovite. Oroya-style lodes formed at similar P–T conditions as the Fimiston lodes and are controlled by brittle–ductile shear zones, associated dilational jogs that are particularly well developed at the contact between Paringa Basalt and black shale interflow sedimentary rocks and altered wall rock. The orebodies are characterised by micro-breccias and zones of intense shear zone foliation, very high gold grades (up to 100,000 g/t Au) and the common association of tellurides and vanadian mica (green leader). Oroya lodes crosscut Fimiston lodes and are interpreted to have formed slightly later than Fimiston lodes as part of one evolving hydrothermal system spanning D1 and D2 deformation (ca. 2,675–2,660 Ma). Charlotte-style lodes, exemplified by the Mt Charlotte deposit, are controlled by a sheeted vein (stockwork) complex of north-dipping quartz veins and hydrothermally altered wall rock. The Mt Charlotte orebody formed at 120 to 440 °C and 150 to 250 MPa during movement along closely spaced D4 (2,625 Ma) and reactivated D2 faults with the quartz granophyre in the Golden Mile Dolerite exerting a strong lithological control on gold mineralisation. Veins consist of quartz–carbonate–minor scheelite, and wall-rock alteration comprises chlorite destruction and growth of ferroan carbonate–sericite–pyrite–native gold. Pyrite–pyrrhotite is zoned on the scale of vein haloes and of the entire mine, giving a vertical temperature gradient of 50–100 °C over 1,000 vertical metres. The structural–hydrothermal model proposed consists of four major stages: (1) D1 thrusting and formation of Fimiston-style lodes, (2) D2 reverse faulting and formation of Oroya-style lodes, (3) D3 faulting and dissecting of Fimiston- and Oroya-style lodes, and (4) D4 faulting and formation of Mt Charlotte-style sheeted quartz vein system. The giant accumulation of gold in the Golden Mile deposit was formed due to protracted gold mineralisation throughout episodes of an Archaean orogeny that spanned about 45 Ma. Fluid conduits formed early in the tectonic history and persisted throughout orogenesis with the plumbing system showing a rare high degree of focussing, efficiency and duration. In addition to the long-lasting fluid plumbing system, the wide variety of transient structural and geochemical traps, multiple fluid sources and precipitation mechanism contributed towards the richest golden mile in the world.Editorial handling: B. Lehmann  相似文献   

7.
The Lefroy Goldfield in eastern Tasmania is anomalous in southeastern Australia because mineralised fault reefs (i.e. reefs that are also faults) strike in an easterly direction at a high angle to the predominantly northwest strike of bedding and folds. Gold mineralisation is of Early to Middle Devonian age, with reef formation coinciding with a third regionally compressive deformation event (D3), and a second phase of Tabberabberan orogenesis. Mineralised reefs are hosted by Mathinna Supergroup turbidites of Cambrian to Ordovician age and extend for up to 2 km across the boundary between the sandstone‐dominated Stony Head Sandstone and the shale‐dominated Turquoise Bluff Slate. Ore shoots in the reefs plunge moderately west and, in the Volunteer Mine, coincide with the intersection of the reef and a D1/D2 thrust contact. The subvertical orientation and discordant relationship of the mineralised reefs to bedding, as well as the lack of gold mineralisation along bedding and pre‐D3 structures, indicate that the reefs formed during a period of wrench faulting. In contrast to lode‐style deposits in Victoria, the far‐field minimum compressive stress at Lefroy during reef formation was not vertical but, rather, occupied a subhorizontal orientation.  相似文献   

8.
The Pine Creek Orogen, located on the exposed northern periphery of the North Australian Craton, comprises a thick succession of variably metamorphosed Palaeoproterozoic siliciclastic and carbonate sedimentary and volcanic rocks, which were extensively intruded by mafic and granitic rocks. Exposed Neoarchean basement is rare in the Pine Creek Orogen and the North Australian Craton in general. However, recent field mapping, in conjunction with new SHRIMP U–Pb zircon data for six granitic gneiss samples, have identified previously unrecognised Neoarchean crystalline crust in the Nimbuwah Domain, the eastern-most region of the Pine Creek Orogen. Four samples from the Myra Falls and Caramal Inliers, the Cobourg Peninsula, and the Kakadu region have magmatic crystallisation ages in the range 2527–2510 Ma. An additional sample, from northeast Myra Falls Inlier, yielded a magmatic crystallisation age of 2671 ± 3 Ma, the oldest exposed Archean basement yet recognised in the North Australian Craton. These results are consistent with previously determined magmatic ages for known outcropping and subcropping crystalline basement some 200 km to the west. A sixth sample yielded a magmatic crystallisation age of 2640 ± 4 Ma. The ca. 2670 Ma and ca. 2640 Ma samples have ca. 2500 Ma metamorphic zircon rims, consistent with metamorphism broadly coeval with emplacement of the volumetrically dominant ca. 2530–2510 Ma granites and granitic gneisses. Neoarchean zircon detritus, particularly in the ca. 2530–2510 Ma and ca. 2670–2640 Ma age span, are an almost ubiquitous feature of detrital zircon spectra of unconformably overlying metamorphosed Palaeoproterozoic strata of the Pine Creek Orogen, and of local post-tectonic Proterozoic sequences, consistent with this local provenance. Neoarchean zircon is also a common detrital component in Palaeoproterozoic sedimentary units across much of the North Australian Craton suggesting the existence of an extensive, if not contiguous, Neoarchean crystalline basement underlying not only a large part of the Pine Creek Orogen, but also much of the North Australian Craton.  相似文献   

9.
Establishing relative and absolute time frameworks for the sedimentary, magmatic, tectonic and gold mineralisation events in the Norseman-Wiluna Belt of the Archean Yilgarn Craton of Western Australia, has long been the main aim of research efforts. Recently published constraints on the timing of sedimentation and absolute granite ages have emphasized the shortcomings of the established rationale used for interpreting the timing of deformation events. In this paper the assumptions underlying this rationale are scrutinized, and it is shown that they are the source of significant misinterpretations. A revised time chart for the deformation events of the belt is established. The first shortening phase to affect the belt, D1, was preceded by an extensional event D1e and accompanied by a change from volcanic-dominated to plutonic-dominated magmatism at approximately 2685–2675 Ma. Later extension (D2e) controlled deposition of the ca 2655 Ma Kurrawang Sequence and was followed by D2, a major shortening event, which folded this sequence. D2 must therefore have started after 2655 Ma—at least 20 Ma later than previously thought and after the voluminous 2670–2655 Ma high-Ca granite intrusion. Younger transcurrent deformation, D3–D4, waned at around 2630 Ma, suggesting that the crustal shortening deformation cycle D2–D4 lasted approximately 20–30 Ma, contemporaneous with low-volume 2650–2630 Ma low-Ca granites and alkaline intrusions. Time constraints on gold deposits suggest a late mineralisation event between 2640–2630 Ma. Thus, D2–D4 deformation cycle and late felsic magmatism define a 20–30 Ma long tectonothermal event, which culminated with gold mineralisation. The finding that D2 folding took place after voluminous high-Ca granite intrusion led to research into the role of competent bodies during folding by means of numerical models. Results suggest that buoyancy-driven doming of pre-tectonic competent bodies trigger growth of antiforms, whereas non-buoyant, competent granite bodies trigger growth of synforms. The conspicuous presence of pre-folding granites in the cores of anticlines may be a result from active buoyancy doming during folding.  相似文献   

10.
The molybdenite and scheelite mineralisation in the Native Dog Pluton at Monkey Gully near Yea is hosted within an I-type (post-orogenic) pluton, which shows extensive fractionation and magma mixing, and was emplaced in an extensional environment. The pluton comprises four principal rock types: tonalite, granodiorite, dacite and leucogranite. Emplacement of the pluton was in an extensional northwest to southeast paleostress field. Early extensional quartz veins, related to cooling, are overprinted by both dacitic dykes and late-stage quartz sheeted veins. The late-stage veins host the molybdenum and tungsten mineralisation in the deposit. 206Pb/238U zircon ages of 356 ±14 Ma and 375 ± 22 Ma place pluton formation and mineralisation at the onset of the Kanimblan Orogeny and later than other major molybdenum deposits in Victoria. Key factors governing the source for the granite and its associated mineralisation are: (1) the presence of a highly fractionated and sulfur-rich leucogranite; and (2) the pluton's location in a regional jog overlying the Selwyn basement block. Finally, a model is developed to explain the differences between this Melbourne Zone molybdenum and tungsten deposit compared with other metallogenic porphyry deposits.  相似文献   

11.
Indications of intense deformation in the Anyui-Chukotka Fold System and the South Anyui Suture Zone have been noted for a long time [3, 5, 19, 36]. The character and age of the deformation, however, remain a matter of debate. Using structural paragenetic and deformational kinematic analyses, we establish three deformation stages in the Anyui-Chukotka Fold System. The structural assembly comprising open folds and NW-trending axial-plane cleavage was formed during the stage of regional compression (D1) related to the collision of the Chukotka-Arctic Alaska microcontinent with Eurasia. The assembly of the second stage in the Alyarmaut Rise is distinguished by isoclinal folds F2, gently dipping metamorphic schistosity, and pervasive cleavage in combination with folded quartz veins and lenses. Planar structural elements of the second stage are disturbed by low-amplitude normal and reverse faults and kink folds of stage D3. The U-Pb (SHRIMP-RG) and 40/39Ar methods were used for determination of the isotopic age of the deformations. The Aptian-Albian zircon age (117–108 Ma) has been established for six postcollision granitic plutons of the Anyui-Chukotka Fold System and the South Anyui Suture. Syncollision deformation completed 125–117 Ma ago. The extensional tectonic stage D2 accompanied by emplacement of the Lyupveem pluton occurred 120–105 Ma ago. The 40/39Ar age of the biotite from the metamorphic rocks marks the age of syndeformation metamorphism (109–103 Ma). The lower limit of brittle failure and deformation D3 is estimated at 105 Ma.  相似文献   

12.
华南板块早中生代陆内造山过程——以雪峰山-九岭为例   总被引：3，自引：1，他引：2  
褚杨  林伟  FAURE Michel  王清晨 《岩石学报》2015,31(8):2145-2155
雪峰山-九岭造山带位于华南板块的中心区域,是一条典型的陆内造山带。通过详细的野外地质观察,雪峰山在早中生代经历了3期构造变形:D1为上部指向NW的韧性剪切,D2代表了一期反向褶皱-逆冲构造事件,以及D3期的水平挤压形成的直立的褶皱、劈理和线理。而在九岭,早中生代大规模脆-韧性域构造变形叠加在早古生代韧性变形之上,形成了一系列极性NW逆冲断层和不对称褶皱。雪峰山-九岭陆内造山带形成于早中生代,造山作用可以分为两个阶段,即245~225Ma的挤压变形阶段和225~215Ma的垮塌-岩浆侵位阶段。雪峰山-九岭造山带的构造特点表明,华南板块东南缘古太平洋板块向北西方向的俯冲可能引发了早中生代的陆内造山过程。  相似文献   

13.
Strongly deformed volcaniclastic metasediments and ophiolitic slices hosting the Sukari gold mineralization display evidence of a complex structural evolution involving three main ductile deformational events (D1–D3). D1 produced ENE-trending folds associated with NNW-propagating thrust slices and intrusion of the Sukari granite (689 ± 3 Ma). D2 formed a moderately to steeply dipping, NNW-trending S2 foliation curved to NE and developed arcuate structure constituting the Kurdeman shear zone (≤ 595 Ma) and East Sukari imbricate thrust belt. Major NE-trending F2 folds, NW-dipping high-angle thrusts, shallow and steeply plunging mineral lineation and shear indicators recorded both subhorizontal and subvertical transport direction during D2. D3 (560–540 Ma) formed NNE-trending S3 crenulation cleavage, tight F3 folds, Sukari Thrust and West Sukari imbricate thrust. The system of NW-trending sinistral Kurdeman shear zone (lateral ramps and tear faults) and imbricate thrusts (frontal ramps) forming the actuate structure developed during SE-directed thrusting, whereas the prevailing pattern of NNE-trending dextral Sukari shear zone and imbricate thrusts forming Sukari thrust duplex developed during NE-directed tectonic shearing. Sukari granite intruded in different pluses between 689 and 540 Ma and associated with at least four phases of quartz veins with different geometry and orientation. Structural analysis of the shear fabrics indicates that the geometry of the mineralized quartz veins and alteration patterns are controlled by the regional NNW- and NE-trending conjugate zones of transpression. Gold-bearing quartz veins are located within NNW-oriented sinistral shear zones in Kurdeman gold mine area, within steeply dipping NW- and SE dipping thrusts and NE- and NS-oriented dextral and sinistral shear zones around Sukari mine area, and along E-dipping backthrusts and NW-SE and N-S fractures in Sukari granite. The high grade of gold mineralization in Sukari is mainly controlled by SE-dipping back-thrusts branched from the major NW-dipping Sukari Thrust. The gold mineralization in Sukari gold mine and neighboring areas in the Central Eastern Desert of Egypt is mainly controlled by the conjugate shear zones of the Najd Fault System and related to E-W directed shortening associated with oblique convergence between East and West Gondwana.  相似文献   

14.
《Precambrian Research》2004,128(3-4):475-496
The Proterozoic igneous, deformation and metamorphic histories of the Palaeoproterozoic Rudall Complex in the northwestern Paterson Orogen can be linked to those of the Arunta Inlier in central Australia, and in part with the Capricorn Orogen in central Western Australia. The similarities in deformation and metamorphic histories for these widely separated regions indicate a Palaeoproterozoic continent–continent collisional event between the Palaeoproterozoic West Australian and North Australian cratons between c. 1830 and 1765 Ma. In the Paterson Orogen this Palaeoproterozoic collisional event resulted in the Yapungku Orogeny, which included thrust stacking of clastic sedimentary and volcanic rocks, deposition of the protoliths for the c. 1790 Ma siliciclastic paragneiss succession contemporaneous with granitic intrusion, and metamorphism up to granulite facies. During this 65-million-year period, the Arunta Inlier and Capricorn Orogen were deformed, metamorphosed at medium to high grades and intruded by granitoids during the Strangways Orogeny in the Arunta Inlier and the Capricorn Orogeny in the Capricorn Orogen.The Neoproterozoic Tarcunyah, Throssell and Lamil groups are clastic sedimentary sequences that were deposited after 1070 Ma in the northwestern Paterson Orogen, and deformed by the Miles Orogeny before 678 Ma. The Miles Orogeny produced a northwesterly trending fold and fault system of tight to isoclinal upright and overturned folds and thrust faults. The orogeny may have been coincident with the c. 750–720 Ma Areyonga tectonic movement affecting the Arunta Inlier and the lower Neoproterozoic part of the Amadeus Basin in central Australia. At c. 550 Ma the Paterson Orogeny, which is most likely equivalent to the Petermann Orogeny in the Musgrave Complex of central Australia, deformed the northwestern Paterson Orogen and was preceded by local intrusion of granites.The similarities of styles and timing of deformation in the northwestern Paterson Orogen, Arunta Inlier and Capricorn Orogen indicate that these three regions were probably linked during most of the Proterozoic.  相似文献   

15.
The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L1 0 intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.  相似文献   

16.
Magmatism,metamorphism and metasomatism in the Palaeoproterozoic‐Mesoproterozoic Mt Painter Inlier and overlying Neoproterozoic Adelaidean rocks in the northern Flinders Ranges (South Australia) have previously been interpreted as resulting from the ca 500 Ma Delamerian Orogeny. New Rb–Sr, Sm–Nd and U–Pb data, as well as structural analysis,indicate that the area also experienced a second thermal event in the Late Ordovician (ca 440 Ma). The Delamerian Orogeny resulted in large‐scale folding, prograde metamorphism and minor magmatic activity in the form of a small volume of pegmatites and leucogranites. The Late Ordovician event produced larger volumes of granite (the British Empire Granite in the core of the inlier) and these show Nd isotopic evidence for a mantle component. The high‐temperature stage of this magmatic‐hydrothermal event also gave rise to unusual diopside‐titanite veins and the primary uranium mineralisation in the basement, of which the remobilisation was younger than 3.5 Ma. It is possible that parts of the Mt Gee quartz‐hematite epithermal system developed during the waning stages of the Late Ordovician event. We suggest that the Ordovician hydrothermal system was also the cause of the commonly observed retrogression of Delamerian metamorphic minerals (cordierite, andalusite) and the widespread development of actinolite, scapolite, tremolite and magnetite in the cover sequences. Deformation during the Late Ordovician was brittle. The recognition of the Late Ordovician magmatic‐hydrothermal event in the Mt Painter Province might help to link the tectonic evolution of central Australia and the southeast Australian Lachlan Fold Belt.  相似文献   

17.

The Einasleigh Metamorphics are the lowest exposed component of the Etheridge Group, part of the Etheridge Province, in the Georgetown region of north Queensland. Previous dating of granites has imposed a younger age limit of about 1550 Ma for the depositional age of the Etheridge Group. Based on SHRIMP U‐Pb analyses of zircon from mafic (1674.9 ±3.3 Ma and 1655.9 ±2.2 Ma) and felsic (1695.8 ± 1.5 Ma and 1684.2 ± 2.1 Ma) intrusive rocks in the Einasleigh Metamorphics, it can now be demonstrated that deposition commenced at about 1700 Ma, and continued for an estimated 100 million years. The stratabound, base‐metal deposits in the Mt Isa Inlier, Broken Hill Block and McArthur Basin formed in the early part of this time span, thereby suggesting potential for these styles of mineralisation in the Georgetown region.  相似文献   

18.
Plutons of the Naraku Batholith were emplaced into Proterozoic metasediments of the northern portion of the Eastern Fold Belt of the Mt Isa Inlier during two intrusive episodes approximately 200 million years apart. Structural relationships and geochronological data suggest that the older plutons (ca 1750 Ma) are contemporaneous with granites of the Wonga Batholith to the west. The Dipvale Granodiorite and the Levian Granite represent these older intrusive phases of the Naraku Batholith, and both contain an intense tectonic foliation, S1, which is interpreted to have formed during the north‐south shortening associated with D1 of the Isan Orogeny. The geometry of S1 form surfaces at the southern end of the Dipvale Granodiorite, and of the previously unrecognised sheeted contact, defines a macroscopic, steeply south‐southwest‐plunging antiform, which was produced by the regional D2 of the Isan Orogeny. S1 form surfaces in the Levian Granite define open F2 folds with wavelengths of several hundred metres. The structural age of emplacement of the Dipvale Granodiorite and the Levian Granite is interpreted to be pre‐ or syn‐ the regional D1. An intense foliation present in some of the younger (ca 1505 Ma) granites that comprise the bulk of the Naraku Batholith is interpreted to represent S3 of the Isan Orogeny. Foliations commonly have similar styles and orientations in both the pre‐D1 and younger plutons. This emphasises the simplicity with which regional fabrics can be, and probably have been, miscorrelated in the Eastern Fold Belt, and that the classification of granites in general on the basis of structural and geometric criteria alone is fraught with danger.  相似文献   

19.
Stratiform quartz-sulphide-gold veins, locally termed reefs are hosted within the Proterozoic Transvaal Sequence sedimentary succession, in the Sabie-Pilgrim's Rest goldfield, eastern Transvaal. These deposits have produced about 180 tonnes of gold and share many characteristics with those of Telfer, Western Australia. Detailed examination of the Elandshoogte Mine shows that gold deposition occurred in two stages, both linked to bedding-parallel thrust faulting within the sedimentary pile. Deformation being concentrated within incompetent shale beds, interlayered within more competent units. The majority of gold was introduced in the second stage of mineralisation and occurs within fractures in early-formed sulphide minerals. Deposition of competent quartz veins accompanying early sulphide and gold mineralisation resulted in a change in deformation style within the reef zone, from early shearing in shales to later duplex faulting of the quartz-reef. Fluids accompanying faulting are implied to have transported gold, and a magmatic source of mineralisation is suggested.  相似文献   

20.
Gold deposits in the Syama and Tabakoroni goldfields in southern Mali occur along a north-northeast trending mineralised litho-structural corridor that trends for approximately 40 km. The deposits are interpreted to have formed during a craton-wide metallogenic event during the Eburnean orogeny. In the Syama goldfield, gold mineralisation in 9 deposits is hosted in the hanging-wall of the Syama-Bananso Shear Zone in basalt, greywacke, argillite, lamprophyre, and black shale. Gold is currently mined primarily from the oxidised-weathered zone of the ore bodies. In the Syama deposit, mineralisation hosted in altered basalt is associated with an intense ankerite–quartz–pyrite stockwork vein systems, whereas disseminated style mineralisation is also present in greywackes. In contrast, the Tellem deposit is hosted in quartz–porphyry rocks.In the Tabakoroni goldfield, gold mineralisation is hosted in quartz veins in tertiary splay shears of the Syama-Bananso Shear Zone. The Tabakoroni orebody is associated with quartz, carbonate and graphite (stylolite) veins, with pyrite and lesser amounts of arsenopyrite. There are four main styles of gold mineralisation including silica-sulphide lodes in carbonaceous fault zones, stylolitic quartz reefs in fault zones, quartz–Fe–carbonate–sulphide lodes in mafic volcanics, and quartz–sulphide stockwork veins in silicified sediments and porphyry dykes. The several deposit styles in the goldfield thus present a number of potential exploration targets spatially associated with the regional Syama-Bananso Shear Zone and generally classified as orogenic shear-hosted gold deposits.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号