首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
  相似文献   

2.
We present new evidence of shallow-water muddy contourite drifts at two distinct locations in the central Mediterranean characterized by a relatively deep shelf edge (between 170 and 300 m below sea level): the south-eastern Adriatic margin and the north-western Sicily Channel. The growth of these shelf-edge contourite drifts is ascribed to the long-term impact of the Mediterranean themohaline circulation. The Levantine Intermediate Water flows continuously, with annual or inter-annual variations, and affects the shelf edge and the upper slope in both study areas. In addition, the SW Adriatic margin is impinged by the seasonally modulated off-shelf cascading of North Adriatic Dense Water. This water mass has formed ever since the large Adriatic continental shelf was drowned by the post-glacial sea-level rise. It energetically sweeps the entire slope from the shelf edge to the deep basin. These bottom currents flow parallel or oblique to the depth contours, and are laterally constricted along markedly erosional moats aligned parallel to the shelf edge where they increase in flow velocity. The internal geometry and growth patterns of the shelf-edge contourites reflect changes in oceanographic setting affecting the whole Mediterranean Sea. In particular, seismic correlation with published sediment cores documents that these deposits are actively growing and migrating during the present interglacial, implying an enhancement in bottom-water formation during intervals of relative sea-level rise and highstand. Regardless of the specific mechanisms of formation, sediment drifts in both study areas have been affected by widespread thin-skinned mass-wasting events during post-glacial times. Repeated mass-transport processes have affected in particular the downslope flank of the shelf-edge contourite drifts, indicating that these muddy deposits are prone to failure during, or soon after, their deposition.  相似文献   

3.
Our investigation is centred on the continental slope of the Antarctic Peninsula and adjacent basin. Type of sediments, sedimentary stratigraphy, and physical and geotechnical characterization of the sediments have been integrated. Four different types of sediments have been defined: diamictons, silty and muddy turbidites, muddy, silty and muddy matrix embedded clast contourites. There is a close correspondence between the physical properties (density, magnetic susceptibility and p-wave velocity) and the texture and/or fabric as laminations and stratification. From a quantitative point of view, only a few statistical correlations between textural and physical properties have been found. Within the geotechnical properties, only water content is most influenced by texture. This slope, with a maximum gradient observed (20°), is stable, according to the stability under gravitational loading concepts, and the maximum stable slope that would range from 22° to 29°. Nevertheless, different instability features have been observed. Volcanic activity, bottom currents, glacial loading-unloading or earthquakes can be considered as potential mechanisms to induce instability in this area.  相似文献   

4.
Our investigation is centred on the continental slope of the Antarctic Peninsula and adjacent basin. Type of sediments, sedimentary stratigraphy, and physical and geotechnical characterization of the sediments have been integrated. Four different types of sediments have been defined: diamictons, silty and muddy turbidites, muddy, silty and muddy matrix embedded clast contourites. There is a close correspondence between the physical properties (density, magnetic susceptibility and p-wave velocity) and the texture and/or fabric as laminations and stratification. From a quantitative point of view, only a few statistical correlations between textural and physical properties have been found. Within the geotechnical properties, only water content is most influenced by texture. This slope, with a maximum gradient observed (20°), is stable, according to the stability under gravitational loading concepts, and the maximum stable slope that would range from 22° to 29°. Nevertheless, different instability features have been observed. Volcanic activity, bottom currents, glacial loading-unloading or earthquakes can be considered as potential mechanisms to induce instability in this area.  相似文献   

5.
The Rockall Bank Mass Flow (RBMF) is a large, multi-phase submarine slope failure and mass flow complex. It is located in an area where the Feni Drift impinges upon the eastern flank of the Rockall Bank in the NE Atlantic. A 6100 km2 region of slope failure scarps, extending over a wide water depth range and with individual scarps reaching up to 22 km long and 150 m high, lies upslope of a series of mass flow lobes that cover at least 18,000 km2 of the base of slope and floor of the Rockall Trough. The downslope lobe complex has a negative topographic relief along much of its northern boundary, being inset below the level of the undisplaced contourite drift at the base of slope. The southern margin is topographically more subtle but is marked by the sharp termination of sediment waves outside the lobe. Within the lobe complex the southern margin of the largest lobe shows a positive relief along its southern margin. The initial failure is suggested to have occurred along coherent layer-parallel detachment surfaces at depths of up to 100 m and this promoted initial downslope block sliding which in turn transformed into debris flows which moved out into the basin. The remains of a deep erosional moat linked to the onlapping contourite complex bisects the region of failed slope, and post-failure thermohaline currents have continued to modify the mass flow in this area. Differential sedimentation and erosion associated with the moat may have promoted slope instability. Following the major failure phase, continuous readjustments of the slope occurred and resulted in small-volume turbidites found in shallow gravity cores collected on the lobes. The short term trigger for the failure remains uncertain but earthquake events associated with a deep-seated tectonic lineament to the north of the mass flow may have been important. A Late Pleistocene age for the slope failure is likely. The RBMF is unusual in that it records large-scale collapse of a contourite body that impinged on a sediment-undersupplied slope system. Unlike many other large slope failure complexes along the NE Atlantic margin, the RBMF occurs in a region where there was little overloading by glacial sediment.  相似文献   

6.
  相似文献   

7.
Landslide processes on the western slope of the Kuril Basin were studied using bathymetry and seismic data obtained under the international KOMEX and SSGH projects. Slope areas containing landslides, landslide blocks and mass-transport deposits were distinguished. Large-scale landslides occupying an area of more than 100 km2 are located in such areas of open continental margins as the slopes of the North Hokkaido Marginal Plateau and Terpeniya Ridge. Landslide blocks up to 2 km in size and mass-transport deposits are located in submarine canyons and fans in Terpeniya Bay. The age of landslides has been estimated as Middle Pleistocene–Holocene. Landslides are most likely triggered by seismic activity and gas saturation of sediments. Subsequent slope failure seems quite probable within the study area, and landslides capable of generating tsunamis may occur.  相似文献   

8.
A regional correlation of Neogene stratigraphy has been attempted along and across the NW European Atlantic continental margin, between Mid-Norway and SW Ireland. Two unconformity-bounded successions are recognised. These are referred to as the lower and upper Neogene successions, and have been dated as Miocene–early Pliocene and early Pliocene–Holocene, respectively, in age. Their development is interpreted to reflect plate-wide, tectonically driven changes in the sedimentary, oceanographic and latterly climatic evolution of the NE Atlantic region. The lower Neogene succession mainly preserves a record of deep-water sedimentation that indicates an expansion of contourite sediment drifts above submarine unconformities, within this succession, on both sides of the eastern Greenland–Scotland Ridge from the mid-Miocene. This is interpreted to record enhanced deep-water exchange through the Faroe Conduit (deepest part of the Southern Gateway), and can be linked to compressive inversion of the Wyville–Thomson Ridge Complex. Thus, a pervasive, interconnected Arctic–North Atlantic deep-water circulation system is a Neogene phenomenon. The upper Neogene succession records a regional change, at about 4 Ma, in the patterns of contourite sedimentation (submarine erosion, new depocentres) coeval with the onset of rapid seaward-progradation of the continental margin by up to 100 km. This build-out of the shelf and slope is inferred to record a marked increase in sediment supply in response to uplift and tilting of the continental margin. Associated changes in deep-water circulation may be part of an Atlantic-wide reorganisation of ocean bottom currents. Glacial sediments form a major component of the prograding shelf margin (shelf-slope) sediment wedges, but stratigraphic data indicate that the onset of progradation pre-dates significant high-latitude glaciation by at least 1 Ma, and expansive Northern Hemisphere glaciation by at least 3 Ma.  相似文献   

9.
《Marine Geology》2006,225(1-4):279-309
Both local and regional controls on slope sedimentation west of Porcupine Bank are assessed using an array of 25 gravity cores, integrated with shallow seismic, TOBI side-scan and high-resolution bathymetry data. The cores were retrieved from an area of smooth, distally steepened slope (between 52° and 53°N) in water depths of 950 to 2750 m. The slope here is unmodified by gravity failures and is swept by bottom currents that flow from S to N along the margin. The cores reveal a coherent shallow stratigraphy that can be traced along and between transects at upper-, mid- and lower-slope levels. AMS 14C dating, oxygen-isotopes and carbonate profiles suggest the cored record could extend as far back as 500 ka in the longest cores, with most cores providing details of the slope response to the last interglacial, last glacial and Holocene forcing. The facies indicate deposition was dominated by a combination of bottom currents, ice-rafting and hemipelagic settling, with carbonate-prone deposits during interglacials, and siliciclastic deposits during glacials. Inferred contourites imply that strong currents operated during interglacials, with weaker current reworking during glacial conditions. A pair of erosion surfaces record significant mid- and upper-slope scouring during Marine Isotope Stage (MIS 3) and in the Early Holocene. The lateral facies distribution implies stronger currents at shallower levels on the slope, although there is evidence that the core of the current migrated up and down the slope, and that sand might locally have spilt down-slope. The bathymetry influenced both the wider geometry of the condensed contourite sheet and the local thickness and facies variation across the slope. A significant result of the study is the identification of a pair of thin sand–mud contourite couplets that record enhanced bottom-current reworking corresponding to periods of interstadial warming during MIS 3. The couplets can be correlated to the terrestrial records onshore Ireland and imply that the NE Atlantic margin oceanographic and onshore climate records are strongly coupled at interstadial level.  相似文献   

10.
The Uruguayan continental margin comprises three sedimentary basins: the Punta del Este, Pelotas and Oriental del Plata basins, the genesis of which is related to the break-up of Gondwana and the opening of the Atlantic Ocean. Herein the continental margin of Uruguay is studied on the basis of 2D multichannel reflection seismic data, as well as gravity and magnetic surveys. As is typical of South Atlantic margins, the Uruguayan continental margin is of the volcanic rifted type. Large wedges of seaward-dipping reflectors (SDRs) are clearly recognizable in seismic sections. SDRs, flat-lying basalt flows, and a high-velocity lower crust (HVLC) form part of the transitional crust. The SDR sequence (subdivided into two wedges) has a maximum width of 85 km and is not continuous parallel to the margin, but is interrupted at the central portion of the Uruguayan margin. The oceanic crust is highly dissected by faults, which affect post-rift sediments. A depocenter over oceanic crust is reported (deepwater Pelotas Basin), and volcanic cones are observed in a few sections. The structure of continental crust-SDRs-flat flows-oceanic crust is reflected in the magnetic anomaly map. The positive free-air gravity anomaly is related to the shelf-break, while the most prominent positive magnetic anomaly is undoubtedly correlated to the landward edge of the SDR sequence. Given the attenuation, interruption and/or sinistral displacement of several features (most notably SDR sequence, magnetic anomalies and depocenters), we recognize a system of NW-SE trending transfer faults, here named Río de la Plata Transfer System (RPTS). Two tectono-structural segments separated by the RPTS can therefore be recognized in the Uruguayan continental margin: Segment I to the south and Segment II to the north.  相似文献   

11.
The Black Shell Turbidite on the Hatteras Abyssal Plain covers at least 50,000 km2, with a volume over 100 km3. It was initiated by failure on the upper continental slope and was channeled southeast through Hatteras Canyon to the plain. Provenance related shape studies indicate that on the plain the current separated into a sandy Phase which flowed S-SE and a lutitic phase, which traveled E-SE and then veered to the south. A change in the direction of slope caused the sandy phase to be deflected to the SE, where it merged with the lutitic phase on the eastern margin of the plain.  相似文献   

12.
In this paper we present an overview of the major triggering mechanisms and preconditions for slope failure on the European continental margins, a vast area in which the dominant factors on sedimentation and erosional processes vary both spatially and temporally. Therefore, we have collated and integrated new as well as published data for both the formerly glaciated and non-glaciated areas of this highly dynamic margin for a time period mainly from the Last Glacial Maximum (LGM) to the present. Mass transport type is predominantly translational sliding on the high-latitude continental margins (north of 52°N), whereas turbidites dominate on lower latitudes. This is partly related to the average slope of the respective continental margin segments and differences in both sediment types and soil properties. Additionally, on low latitudes, submarine slope failures mainly occurred during glacial conditions with low sea level, whereas on high latitudes, they occur during the relatively fast transition from glacial to interglacial conditions (i.e. during periods of sea level rise). The largest submarine slides (e.g. Storegga, Trænadjupet, Andøya) on the glaciated Norwegian margin occurred during the Holocene, a time of rapid ice sheet decay, continental uplift and increased seismic activity, one of the most important triggering mechanisms for large failures during deglaciation processes. Preconditioning factors such as weak layers related to contourite drifts and rapid loading by glacial sediments may enhance strain localization and creep processes on the slope.  相似文献   

13.
Abstract

Potential sediment mass movement was analyzed at ten locations on the continental slope off Peru and northern Chile, using samples obtained from up to 3 m below the seafloor. Shear strength parameters were obtained from consolidated‐undrained triaxial compression tests. Sediment behavior in these tests reflects the influence of organic matter, which is concentrated in the slope deposits by coastal upwelling. High water content of the organic‐rich sediments and the high de‐formability of organic matter contribute to the prevalent ductile behavior. Aggregation of clays by organic matter is apparently responsible for the high friction angles, up to 44°, displayed by the slope deposits. Sediment stability was assessed using infinite slope analyses. These analyses indicate that gravitational forces alone are not sufficient to cause sediment failure at any of the slope locations. Sediment accumulation on the slope is not rapid enough to generate excess pore pressure and reduce the resistance to gravitational sliding. Effects of earthquakes on slope stability were evaluated by modeling earthquake‐induced inertia forces as static forces and estimating pore pressures developed during cyclic loading. This analysis shows that sediments of the lower slope off Peru possess the highest susceptibility to failure during earthquakes. Earthquake accelerations on the order of 0.2 gravity are sufficient to trigger slumping at all ten slope locations. Indirect evidence suggests that creep and mass flows initiated at shallower water depths are factors that might contribute to sediment failure on the slope.  相似文献   

14.
Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).  相似文献   

15.
Abstract

Fine‐grained sedimentary deposits on the Kodiak continental shelf and upper slope comprise three distinct compositional types: terrigenous mud, diatomrich mud, and ash‐rich sandy mud. The sediment types can be distinguished on the basis of geotechnical properties as well as by composition. The terrigenous mud has properties largely within the normal range for fine‐grained marine sediment, except for the low compressibility of many samples. This sediment underlies the walls of canyons that incise the upper slope, and analyses of undrained static and cyclic loading indicate potential instability in the steepest areas. The diatom‐rich mud has high water content, plasticity index, and compression index but low grain specific gravity. The ash‐rich sandy mud is nonplastic and has low water content and compressibility. It has high drained and undrained static strength but is extremely weakened by cyclic loading. Extensive deposits of sedimentary bedrock and coarsegrained glacial sediment in the region apparently are relatively stable, but low sediment strength or high compressibility may be encountered at the local sites of soft sedimentary deposits.  相似文献   

16.
In order to assess the controlling factors on the evolution of a shelf margin and the timing of sediment transfer to deep waters, a seismic stratigraphic investigation was carried out in the Eocene interval of northern Santos Basin, offshore Brazil. The studied succession configures a complex of prograding slope clinoforms formed in a passive margin and encompasses five seismic facies and their respective depositional settings: shelf-margin deltas/shorefaces, oblique slope clinoforms, sigmoidal slope clinoforms, continental to shelfal deposits and mass-transport deposits. These are stratigraphically arranged as seven depositional sequences recording a total shelf-edge progradation of about 35 km and a progradation rate of 1,75 km/My. Two main types of sequences can be recognized, the first one (type A) being dominated by oblique slope clinoforms and shelf-margin deltas/shorefaces in which shelf-edge trajectories were essentially flat to descending and extensive sandy turbidites were deposited on the foreset to bottomset zones. Sequences of this type are dominated by forced-regressive units deposited during extensive periods of relative sea-level fall. Type B comprises an upper part represented by aggradational shelfal deposits and a lower part composed of mass-transport deposits and high-relief sigmoidal clinoforms with descending shelf-edge trajectory. Steep slump scars deeply cut the shelfal strata and constitutes the boundary between the two intervals observed in type B sequences. Sandy turbidites occur at the same frequency in both forced- and normal-regressive units but are more voluminous within forced-regressive clinoforms associated with shelf-margin deltas/shorefaces. Major slope failures and mass-transport deposits, by the other hand, occurred exclusively in type B sequences during the onset of sea-level fall and their volume are directly related to the thickness of the shelfal sediments formed during the pre-failure normal regressions.  相似文献   

17.
The Gulf of Cadiz: an unstable giant contouritic levee   总被引：1，自引：0，他引：1  
Recent multibeam bathymetry and acoustic imagery data provide a new understanding of the sedimentary system located in the Gulf of Cadiz which is under the influence of a strong current, the Mediterranean Outflow Water (MOW). When it comes out from the Strait of Gibraltar, the MOW is either channelled along major or secondary channels, or spills over a sedimentary levee. Frequent earthquakes and the constant current shearing generate widespread sediment deformation and instability of contourite deposits. Secondary channels can form by retrogression following an initial failure. At their mouth, sediment accumulates in the form of small sandy contourite lobes. These observations suggest that the Gulf of Cadiz system shares many similarities with channel–levee complexes formed by turbidity current activity. The main difference is that, in the Gulf of Cadiz, the main process is a strongly flowing saline current which locally interacts with gravity processes.  相似文献   

18.
A series of submarine canyons on the southwest slope of Orphan Basin experienced complex failure at 7–8 cal ka that resulted in the formation of a large variety of mass-transport deposits (MTDs) and sediment gravity flows. Ultra-high-resolution seismic-reflection profiles and multiple sediment cores indicate that evacuation zones and sediment slides characterize the canyon walls, whereas the canyon floors and inner-banks are occupied by cohesive debris-flow deposits, which at the mouths of the canyons on the continental rise form large, coalescing lobes (up to 20 m thick and 50 km long). Erosional channels, extending throughout the length of the study area (<250 km), are observed on the top of the lobes. Piston cores show that the channels are partially filled by poorly sorted muddy sand and gravel, capped by inversely to normally graded gravel and sand. Such deposits are interpreted to originate from multi-phase gravity flows, consisting of a lower part behaving as a cohesionless debris flow and an upper part that was fully turbulent.The Holocene age and the widespread synchronous occurrence of these failures indicate a large magnitude earthquake as their possible triggering mechanism. The large debris-flow deposits on the continental rise originated from large failures on the upper continental slope, involving proglacial sediments. Retrogression of these failures led to the eventual failure of marginal sandy till deposits on the upper slope and outer shelf, which due to their low cohesion disintegrated into multi-phase gravity flows. The evacuation zones and slide deposits on the canyon walls were triggered either by the earthquake, or from erosion of the canyon walls by the debris flows. The slides, debris-flows, and multi-phase gravity flows observed in this study are petrographically different, indicating different sediment sources. This indicates that not all failures lead through flow transformation to the production of a multi-phase gravity flow, but only when the sediment source contains ample coarse-grained material. The spatial segregation of the slide, debris-flow, and multi-phase gravity-flow deposits is attributed to the different mobility of each transport process.  相似文献   

19.
This contribution to this special volume represents the first attempt to comprehensively describe regional contourite (along-slope) processes and their sedimentary impacts around the Iberian margin, combining numerically simulated bottom currents with existing knowledge of contourite depositional and erosional features. The circulation of water masses is correlated with major contourite depositional systems (CDSs), and potential areas where new CDSs could be found are identified. Water-mass circulation leads to the development of along-slope currents which, in turn, generate contourite features comprising individual contourite drifts and erosional elements forming extensive, complex CDSs of considerable thickness in various geological settings. The regionally simulated bottom-current velocities reveal the strong impact of these water masses on the seafloor, especially in two principal areas: (1) the continental slopes of the Alboran Sea and the Atlantic Iberian margins, and (2) the abyssal plains in the Western Mediterranean and eastern Atlantic. Contourite processes at this scale are associated mainly with the Western Mediterranean Deep Water and the Levantine Intermediate Water in the Alboran Sea, and with both the Mediterranean Outflow Water and the Lower Deep Water in the Atlantic. Deep gateways are essential in controlling water-mass exchange between the abyssal plains, and thereby bottom-current velocities and pathways. Seamounts represent important obstacles for water-mass circulation, and high bottom-current velocities are predicted around their flanks, too. Based on these findings and those of a selected literature review, including less easily accessible ??grey literature?? such as theses and internal reports, it is clear that the role of bottom currents in shaping continental margins and abyssal plains has to date been generally underestimated, and that many may harbour contourite systems which still remain unexplored today. CDSs incorporate valuable sedimentary records of Iberian margin geological evolution, and further study seems promising in terms of not only stratigraphic, sedimentological, palaeoceanographic and palaeoclimatological research but also possible deep marine geohabitats and/or mineral and energy resources.  相似文献   

20.
Based on new multibeam bathymetric data, seismic-reflection profiles and side-scan sonar images, a great number of submarine failures of various types and sizes was identified along the northern margin of the Ligurian Basin and characterized with 3 distinct end-members concerning their location on the margin, sedimentary processes and possible triggering mechanisms. They include superficial landslides mainly located in the vicinity of the main mountain-supplied rivers and on the inner walls of canyons (typically smaller that 108 m3 in volume: Type 1), deep scars 100?C500 m high along the base of the continental slope (Type 2), and large-scale scars and Mass Transport Deposits (MTDs) affecting the upper part of the slope (Type 3 failures). The MTDs are located in different environmental contexts of the margin, including the deep Var Sedimentary Ridge (VSR) and the upper part of the continental slope in the Gulf of Genova (Finale Slide and Portofino Slide), with volumes of missing sediment reaching up to 1.5 × 109 m3. High sedimentation rates related to hyperpycnal flows, faults and earthquake activity, together with sea-level fluctuations are the main factors invoked to explain the distribution and sizes of these different failure types.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号